RESUMEN
PURPOSE: There are unfavorable opinions connected with rubber dam isolation amongst dental students during adhesive restorative treatments. The aim of this study was to investigate the various barriers to practicing rubber dam isolation during dental procedures and provide necessary insight towards implementation of rubber dam among undergraduate dental students in Jazan. MATERIALS AND METHODS: A pre-validated questionnaire in English entitled Rubber Dam Isolation Survey (E-RDIS) based on the Capability Opportunity Motivation-Behaviour (COM-B) model of behavioral change wheel was responded by 226 university dental students. RESULTS: The satisfaction of training was highest among sixth year students (Mean=3.57, p<0.001). Fourth year dental students scored higher in the capability (Mean=3.18) and were more highly motivated to use rubber dams (Mean=4.21). Third year students were more likely to use rubber dams in anterior teeth (Mean=3.52) whereas fourth year students use rubber dam in posterior teeth (Mean=3.74). Lack of motivation was found to be the significant barrier influencing rubber dam usage (odds ratio (OR)=12.1; 3.74, p<0.05). CONCLUSION: The satisfaction with training differed among the students of different years. The rubber dam technique might be used more frequently if it were made clear to students that mastering it would be necessary for them to receive good grades.
RESUMEN
This report outlines 2 digitally planned cases in which the teeth underwent magnetic extrusion to preserve the supracrestal tissue attachment and regain the ferrule, followed by their restoration. Case 1: A 42-year-old man with the chief concern of a fractured right maxillary second premolar. Following the completion of root canal treatment, the remaining tooth structure was insufficient to create a ferrule for tooth restoration. For this scenario, a rapid magnetic extrusion technique was performed on tooth #4 to obtain an approximate 3-mm ferrule. The condition of both the dentition and the restorative margin was acceptable 18 months following treatment. Case 2: A 62-year-old man with the chief complaint of mobility on both sides of the maxillary arch in relation to a tooth-supported fixed partial denture (FPD). Following removal of the FPD, multiple extractions were carried out and tooth #6 was subjected to magnetic extrusion in 3 stages to a maximum of 4 mm to obtain a ferrule. At the 18-month and 3-year follow-up appointments, the tooth had no symptoms and the gingiva around the restorations had optimal architecture and margins. The 3-dimensional digital planning was helpful in precisely positioning the magnets within the tooth and the provisional restorations to facilitate axial extrusion. The extruded teeth were restored with zirconia crowns in both cases. The beneficial outcomes observed from these cases provides evidence that the integration of digital planning and magnetic extrusion holds promise as a method for reconstructing teeth with crowns that are significantly compromised.
Asunto(s)
Extrusión Ortodóncica , Humanos , Masculino , Persona de Mediana Edad , Adulto , Extrusión Ortodóncica/métodos , Diente Premolar/diagnóstico por imagen , Restauración Dental Permanente/métodos , Magnetismo , Fracturas de los Dientes/diagnóstico por imagen , Fracturas de los Dientes/terapia , Tratamiento del Conducto Radicular/métodos , Diseño Asistido por Computadora , Dentadura Parcial FijaRESUMEN
AIM: Several factors influence the condition of the periapical tissues associated with root filled teeth. The primary objective of this study was to retrospectively evaluate the extent and speed of bone healing of large periapical lesions associated with nonsurgical root canal treatment or retreatment. The secondary objective was to analyse the relationship between the time to complete healing when analysed using cone beam computed tomography (CBCT) and other possible predictors that affect healing. METHODOLOGY: Seventy-nine patients were treated during the years 2013-2020 with large periapical lesions of endodontic origin (10-15 mm) as observed on intraoral periapical radiographs (IOPAR) were included. IOPAR and CBCT were available before treatment and during the follow-up (IOPAR every 6 months and CBCT every 12 months). The volume of periapical lesions was calculated by OsiriX Lite software. Variables such as initial volume of the lesion, age, gender, type of treatment or type of root canal filling were compared to identify the differences between healed and unhealed lesions. Pearson's Chi-square test was used for categorical variables, the t-test for age and the Wilcoxon test for initial volume of the lesion. The association between time to healing and the variables was assessed using univariate analysis and multivariate analysis. The Wilcoxon test was used to observe the association of healing time with categorical variables and the correlation index was measured with the quantitative variables. RESULTS: Of the 79 cases analysed, 60 lesions (76%) were completely healed as verified by CBCT in a mean healing time of 19 months, of which 60% healed fully between 12 and 18 months. Increase in age of patient and larger initial volume of the lesion were associated with a significantly longer healing time (p < .001). Gender, filling material and type of treatment did not have a significant effect on the healing process (p > .05). CONCLUSIONS: Clinicians should be aware that periapical lesions in older patients and larger areas of bone loss take longer to heal. CBCT monitoring of large periapical lesions is critical and it can help clinicians in the decision-making process.
Asunto(s)
Cavidad Pulpar , Periodontitis Periapical , Humanos , Anciano , Estudios Retrospectivos , Tratamiento del Conducto Radicular/métodos , Retratamiento , Tomografía Computarizada de Haz Cónico/métodos , Periodontitis Periapical/terapia , Periodontitis Periapical/cirugíaRESUMEN
OBJECTIVE: The aim was to compare the 'reverse sandwich restoration' to resin composite restorations re- garding marginal adaptation, fracture resistance, favourable/unfavourable fractures in the management of external cervical resorption. METHODS: Forty-eight extracted maxillary central incisors were selected and endodontically treated. Cervical regions of the labial root surfaces received simulated resorptive defects and were restored as three randomly allocated groups: Reverse Sandwich Restoration (resin composite + resin-modified glass ionomer) (RSR); resin composite restoration (COMP), and no restoration (NR). Each group was further divided into two subgroups (n=8 each): Thermomechanical Aging (TA) (equivalent to one year) and No Aging (NA). Marginal adaptation was scored by scanning electron microscopy. Fracture resistance was tested using a universal testing machine. Favourable versus unfavourable fractures were classified based on fracture extent. RESULTS: TA decreased the marginal adaptation for both RSR and COMP. Mean fracture resistance per groups were: RSR-NA 1522.4+-94.9N, RSR-TA 939.6+-72.9N, COMP-NA 1197.6+-95.7N, COMP-TA 870.4+-86.3N, NR-NA 1057.1+-88.1N, and NR-TA 836.6+-81.9N, respectively. Fracture resistance was the highest for RSR- NA compared to all other groups (p<0.05). TA decreased the fracture resistance in all groups (p<0.05), there was no significant difference between RSR and COMP regarding fracture resistance and favourable/ unfavourable fractures (p>0.05). CONCLUSION: RSR provided comparable results to resin composite fillings to restore artificial cervical defects pertaining to marginal adaptation, fracture resistance, and favourable versus unfavourable fractures. RSR is preferable due to its inherent biocompatibility to the periodontium. (EEJ-2023-04-050).
Asunto(s)
Resinas Compuestas , Restauración Dental Permanente , Restauración Dental Permanente/métodos , Resinas Compuestas/uso terapéuticoRESUMEN
This Systematic Review (SR) was to report on the prevalence of pulp stones in the Saudi Arabian (KSA) population. The electronic databases were searched for scientific research articles during May 2021. The data search was performed in electronic search engines like PubMed, Scopus, Web of science, and Saudi Digital Library, and 6 original research articles which fulfilled the eligibility criteria were assessed for qualitative data. The prevalence of pulp stones among the KSA population ranged from 4.6% to 50.93% among the study participants and it ranged between 10.2%-13.34% in the teeth assessed. The pulp stones were more frequently reported in decayed teeth, periodontal diseases, attrition, teeth with dental restorations, and higher in the molar teeth in comparison with the premolar teeth. The data on the prevalence of pulp stones among the Saudi population will be helpful for clinicians in planning endodontic procedures.
RESUMEN
BACKGROUND: This study aimed to ascertain the prevalence of dental anomalies and their ability to estimate sex status. MATERIAL AND METHODS: This cross-sectional radiographic study was based on the evaluation of dental anomalies of Saudi children aged between 5 and 17 years. A total of 1940 orthopantomograms (OPG) were screened, of which 1442 were included. All the OPGs were digitally evaluated with ImageJ software. The demographic variables and dental anomaly findings were subjected to descriptive and comparative statistical analysis. Discriminant function analysis was conducted for sex estimation. p value < 0.05 was considered as significant. RESULTS: The mean age of the children in this study was 11.35 ± 0.28 years. At least one dental anomaly was detected in 161 children (11.17%), including 71 males and 90 females. Only 13 children (8.07%) presented with more than one anomaly. The most common dental anomaly detected was root dilaceration (47.83%) followed by hypodontia (31.68%). The least common dental anomaly was infraocclusion (1.86%). The sex prediction accuracy using discriminant function analysis was 62.9% (p < 0.01). CONCLUSION: The prevalence of dental anomalies was 11.17% with root dilaceration and hypodontia being the most common. The role of dental anomalies in sex estimation was found to be ineffective.
RESUMEN
Recently in oral health care settings, the focus of assessing treatment outcomes has shifted from the perspective of the clinician towards that of the patient. Endodontology is a specialty of dentistry concerned with the prevention and treatment of pulp and periapical diseases. Research in endodontology and its associated treatment outcomes have focused mainly on clinician-reported outcomes (CROs) and not dental patient-reported outcomes (dPROs). As a result, there is a need to emphasize the importance and relevance of dPROs to researchers and clinicians. The aim of this review is to present an overview of dPROs and dPROMs within endodontics in an attempt to create a better understanding of the patient experience, highlight the need to place the patient at the center of treatment, enhance patient care and encourage more research into dPROs. The key dPROs following endodontic treatment include pain, tenderness, tooth function, need for further intervention, adverse effects (exacerbation of symptoms, tooth discoloration) and Oral Health-Related Quality of Life. dPROs are important following endodontic treatment because they assist clinicians and patients when they discuss and select the most appropriate management options, help clinicians make decisions on pre-operative assessment, prevention and treatment, and improve the methodology and design of future clinical studies. Clinicians and researchers in endodontology should prioritize patient welfare and undertake routine analyses of dPROs using appropriate and robust measures. Due to the lack of agreement over the reporting and definition of endodontic treatment outcomes, a comprehensive project to define a ``Core Outcome Set for Endodontic Treatment Methods (COSET)'' is currently ongoing. In the future, a new and exclusive assessment tool should be developed to reflect the viewpoints of patients receiving endodontic treatment more accurately.
Asunto(s)
Endodoncia , Calidad de Vida , Humanos , Atención Odontológica , Salud Bucal , Medición de Resultados Informados por el PacienteRESUMEN
Dental patient-reported outcomes (dPROs) are self-reported descriptions of a patient's oral health status that are not modified or interpreted by a healthcare professional. Dental patient-reported outcome measures (dPROMs) are objective or subjective measurements used to assess dPROs. In oral healthcare settings, the emphasis on assessing treatment outcomes from the patient's perspective has increased and this is particularly important after traumatic dental injuries (TDIs), as this group of injuries represent the fifth most prevalent disease or condition worldwide. The purpose of this review is to summarize the current use of dPROs and dPROMs in the field of dental traumatology. Oral Health-Related Quality of Life, pain, swelling, aesthetics, function, adverse effects, patient satisfaction, number of clinical visits and trauma-related dental anxiety are the key dPROs following TDIs. Clinicians and researchers should consider the well-being of patients as their top priority and conduct routine evaluations of dPROs using measures that are appropriate, accurate and reflect what is important to the patient. After a TDI, dPROs can assist clinicians and patients to choose the best management option(s) for each individual patient and potentially improve the methodology, design and relevance of clinical studies.
Asunto(s)
Traumatismos de los Dientes , Traumatología , Humanos , Calidad de Vida , Medición de Resultados Informados por el Paciente , Autoinforme , Traumatismos de los Dientes/terapiaRESUMEN
BACKGROUND: Mucormycosis is an infection caused by fungi belonging to the order Mucorales. Rhizopus oryzae is one of the most prevalent organisms identified in mucormycosis patients. Because it spreads quickly through the blood vessels, this opportunistic illness has an exceptionally high fatality rate, even when vigorous treatment is administered. Nonetheless, it has a high tolerance to antifungal medicines, limiting treatment options. As a result, improved methods for preventing and treating mucormycosis are desperately needed. Hence, this study was aimed at assessing the effect of lupeol, quercetin, and solasodine against mucormycosis based on computational approaches. METHODS: The Rhizopus oryzae RNA-dependent RNA polymerase (RdRp) was the target for the design of drugs against the deadly mucormycosis. The three-dimensional structure of the RdRp was modelled with a Swiss model and validated using PROCHECK, VERIFY 3D, and QMEAN. Using the Schrodinger maestro module, a molecular docking study was performed between RdRp and the antimicrobial phytochemicals lupeol, quercetin, and solasodine. A molecular dynamics (MD) simulation study was used to assess the stability and interaction of the RdRp with these phytochemicals. RESULTS: The RdRp protein binds strongly to lupeol (-7.2 kcal/mol), quercetin (-9.1 kcal/mol), and solasodine (-9.6 kcal/mol), according to molecular docking assessment based on the lowest binding energy, confirmation, and bond interaction. Simulations suggest that lupeol, quercetin, and solasodine complexes with RdRp and showed stable confirmation with minimal fluctuation throughout the 200 nanoseconds based on the RMSD and RMSF trajectory assessments. CONCLUSION: The molecular docking and MD simulation investigation improved our understanding of phytochemical-RdRp interactions. Due to its high affinity for RdRp, solasodine may be a better treatment option for mucormycosis.
Asunto(s)
Mucormicosis , Humanos , Mucormicosis/tratamiento farmacológico , Rhizopus/genética , Rhizopus oryzae , Simulación del Acoplamiento Molecular , Quercetina/farmacología , Quercetina/uso terapéutico , ARN Polimerasa Dependiente del ARNRESUMEN
OBJECTIVES: The oral microbiological environment may be implicated in the corrosion of orthodontic metals. This study aimed to examine the prevalence of sulfate-reducing bacteria (SRB) in orthodontic patients undergoing fixed appliance treatment. METHODS: Sixty-nine orthodontic and 69 healthy non-orthodontic participants were enrolled in the study. Supragingival and subgingivaloral biofilm were collected and tested for the presence of SRB. The DNA extraction, polymerase chain reaction (PCR), and 16sRNA Sanger sequencing method was performed from the SRB-positive samples. The sequenced PCR products were analysed and compared with databases to identify the bacterial genus. RESULTS: Amongst 69 orthodontic patients, characteristic black precipitates developed in 14, indicating the presence of iron sulfides which demonstrates the likelihood of SRB. Alternatively, 2 out of 69 showed the presence of SRB in healthy non-orthodontic participants (controls). Desulfovibrio spp was confirmed by analyses of 16sRNA sequencing, which revealed that the SRB prevalence was 20% in the examined participants with orthodontic appliances. CONCLUSIONS: The prevalence of SRB was found to be significantly higher amongst orthodontic patients compared to non-orthodontic participants. Presence of stainless steel in the oral environment may have facilitated the colonisation of SRB.
Asunto(s)
Desulfovibrio , Humanos , Bacterias , Biopelículas , SulfatosRESUMEN
OBJECTIVES: The aim of this study was to determine the technical quality of root canal fillings and the presence of iatrogenic errors in the cases treated by undergraduate dental students using radiographic images. MATERIALS AND METHODS: This study included 480 root-filled teeth, which were evaluated using intraoral periapical radiographic images. The technical quality of obturation was assessed by observing the length, density, and taperness of the root filling. Ledges, apical transportation, fractured instruments, zipping, and root perforation were recorded as iatrogenic errors. Teeth were classified as acceptable if the technical parameters were adequate and there were no iatrogenic errors. STATISTICAL ANALYSIS: Data were statistically analyzed using Pearson's chi-squared test. RESULTS: The quality of root filling was acceptable in 183 of the 480 teeth. The rate of acceptable quality was higher for the teeth treated by 4th-year students (41.9%) than for those treated by 5th-year students (27.4%; p = 0.004). Length and taperness were adequate in more of the patients treated by the 4th-year students (p<0.05). There was a significant difference in the incidence of ledge formation and apical transportation in relation to the student's level (p<0.05). CONCLUSIONS: The technical quality of root fillings performed without iatrogenic errors by undergraduate dental students was declared acceptable in 38.1% of the assessed teeth. There was a noticeable difference in the quality of root canal treatment between the 4th- and 5th-year students. CLINICAL RELEVANCE: The findings demonstrate that periodic assessment of the technical quality of root filling performed by undergraduate dental students provides feedback on curriculum standards.
RESUMEN
Mineral Trioxide Aggregate (MTA) has been a material of revolution in the field of dentistry since its introduction in the 1990s. It is being extensively used for perforation repairs, apexification, root-end filling, obturation, tooth fracture repair, regenerative procedures, apexogenesis, pulpotomies, and as a pulp-capping material because of its desired features such as biocompatibility, bioactivity, hydrophilicity, sealing ability, and low solubility. Even though its application is wide, it has its own drawbacks that prevent it from reaching its full potential as a comprehensive replacement material, including a long setting time, discoloration, mud-like consistency, and poor handling characteristics. MTA is a material of research interest currently, and many ongoing studies are still in process. In this review, the newer advancements of this versatile material by modification of its physical, chemical, and biological properties, such as change in its setting time, addressing the discoloration issue, inclusion of antimicrobial property, improved strength, regenerative ability, and biocompatibility will be discussed. Hence, it is important to have knowledge of the traditional and newer advancements of MTA to fulfill the shortcomings associated with the material.
RESUMEN
OBJECTIVE: This study assessed the influence of chitosan nanoparticles on the fluoride-releasing ability of 4 glass ionomer cement (GIC) through an in vitro analysis. METHODS: Four types of GIC (type II light cure universal restorative, type II universal restorative, GC Fuji VII, and type IX) were modified with nanochitosan particles; 10% chitosan was added to the glass ionomer liquid. Six specimens for each of the 4 groups were created, using expendable Teflon moulds. Discs of each type of GIC (n = 6) were immersed in deionised water at various time intervals. Electrodes selective for fluoride ions were employed to analyse the amount of released fluoride at 1, 7, 14, 21, and 28 days. RESULTS: Chitosan-modified GICs showed greater fluoride release than conventional GICs at all time points. All samples showed an initial high release of fluoride that tapered off with time. The total amount of fluoride released increased from the 1st day to the 28th day on adding chitosan to all the 4 types of GIC. Amongst those, type IX high-strength posterior extra with chitosan released a considerably higher quantity of fluoride at all time intervals. CONCLUSIONS: In all the experimental groups, adding chitosan to the glass ionomer liquid had an accelerating effect on its fluoride-releasing property.
Asunto(s)
Quitosano , Fluoruros , Humanos , Ensayo de Materiales , Cementos de Ionómero VítreoRESUMEN
BACKGROUND: The clinical success of post-core restorations is determined by the composite utilized and the strength of the post-core adhesion. The effectiveness of titanium dioxide nanoparticles (TiO2 NPs) as a multifunctional material with photo-induced activities and better mechanical characteristics are observed as particle size is reduced to under 50 nm. AIM: The purpose of this study is to determine the bond strength of fibre-reinforced composite (FRC) posts with TiO2 NP as fillers and to compare it with conventional composite resin core material. MATERIALS AND METHODS: 30 single-rooted mandibular premolars were selected and routine root canal procedures were done. A quantity of 5% TiO2 NPs were synthesized and added as silanized filler to the experimental composite resin. Post space was prepared and fibre-reinforced composite (FRC) post luting was performed. The specimens were then grouped into the following groups: Group I consisted of the experimental composite resin containing 5% TiO2 fillers, Group II consisted of core X flow, and Group III consisted of Multicore Flow. All test groups were submitted for thermocycling. After this, the samples were tested for micro tensile bond strength. A stereomicroscope with a magnification of 20× was used to examine the fractured surfaces. The data were analysed using one-way ANOVA and Tukey HSD tests. RESULTS: Statistical analysis revealed that Group I showed the highest mean bond strength value of 35.6180 Mpa. The results obtained with Group III showed the lowest mean bond strength value of 19.4690 Mpa. Adhesive failures were identified by stereomicroscopy of the fractured surfaces. CONCLUSION: The experimental composite resin comprising 5% TiO2 NP had a greater bond to the FRC post than other materials tested.
RESUMEN
BACKGROUND: Stem cells play an important role in the success of regenerative endodontic procedures. They are affected by the presence of medicaments that are used before the induction of bleeding or the creation of a scaffold for endodontic regeneration. This study examines the effects of different intracanal medicaments on the viability and survival of dental pulp stem cells at different doses and over different exposure times. METHODS: Dental pulp stem cells were cultured from healthy third molar teeth using the long-term explant culture method and characterized using flow cytometry and exposed to different concentrations of calcium hydroxide, doxycycline, potassium iodide, triamcinolone, and glutaraldehyde, each ranging from 0 (control) to 1000 µg/mL. Exposure times were 6, 24, and 48 h. Cell viability was measured using the MTT assay, and apoptosis was measured using the Annexin V-binding assay. RESULTS: All medicaments significantly reduced cell viability at different concentrations over different exposure times. Calcium hydroxide and triamcinolone favored cell viability at higher concentrations during all exposure times compared to other medicaments. The apoptosis assay showed a significant increase in cell death on exposure to doxycycline, potassium iodide, and glutaraldehyde. CONCLUSION: The intracanal medicaments examined in our study affected the viability of dental pulp stem cells in a time and dose-dependent manner. They also adversely affected the survival of dental pulp stem cells. Further studies are needed to better understand the effect of prolonged exposure to medicaments according to clinical protocols and their effect on the stemness of dental pulp stem cells.
RESUMEN
BACKGROUND: This study aimed to assess the knowledge about guidelines related to COVID-19 infection control procedures among dental health care professionals (DHCPs) in the Jazan region. METHODS: A cross-sectional study involving DHCPs (dental students, interns, and dentists) of the Jazan region between January and March 2021. A questionnaire with 35 items was developed and circulated online among the DHCPs. The dimensionality of the questionnaire was assessed using exploratory factor analysis (EFA). The level of awareness (LOA) was compared across the genders, level of professional experience, and exposure to guidelines. Participants were considered to have high LOA when they responded to 26 or more items correctly. RESULTS: A total of 363 DHCPs participated in the survey. The questionnaire was found to be valid and reliable. EFA revealed a distinct three-factor structure. Moreover, 61.2% of the respondents had high LOA related to COVID-19 infection prevention. Among those who had high LOA, dentists (65.5%) were relatively more than the students (62.5%) and interns (46.2%). Among the six guideline statements related explicitly to operative dentistry, more than 50% of the respondents were aware of 3 guideline statements, while less than 50% of the respondents were aware of the remaining statements. CONCLUSIONS: Most DHCP had a high LOA for general COVID-19 infection prevention and control guidelines. Dentists, males, and those who read the guidelines had higher LOA than their counterparts.
Asunto(s)
COVID-19 , COVID-19/epidemiología , COVID-19/prevención & control , Estudios Transversales , Odontólogos , Femenino , Conocimientos, Actitudes y Práctica en Salud , Personal de Salud , Humanos , Masculino , SARS-CoV-2 , Arabia Saudita/epidemiología , Encuestas y CuestionariosRESUMEN
BACKGROUND: dental pulp-derived stem cells are easy to access and collect and are an excellent source of stem cells for regenerative therapy. These cells can interact with many biomolecules and scaffolds and can pass on the instructive signals to the sites of regeneration where they are used. In this regard cordycepin, a potential biomolecule derived from medicinal mushrooms with a spectrum of bioactive properties such as antioxidant, anti-inflammatory, and anticancer has not yet been tested for its effect on human dental pulp stem cells. OBJECTIVE: the objective of the present study was to assess the in vitro adipogenic and osteogenic differentiation potential of human dental pulp stem cells with or without induction after administration of cordycepin. MATERIALS AND METHODS: human dental pulp stem cells DPSCs were isolated from a healthy permanent tooth extracted for orthodontic purposes after obtaining informed consent. Flow cytometry technique was used to assess the surface markers of these cells such as CD73, CD90, and CD105, CD34, CD45, and HLA-DR. Further, an MTT assay was performed on the cells after subjecting them to various concentrations of cordycepin. Following this, the adipogenic and osteogenic potential of the dental pulp stem cells was assessed with or without induction under the influence/absence of 5 µM of cordycepin. The results obtained were statistically analyzed and documented. RESULTS: it was found that the dental pulp stem cells showed strong positive expression for CD73, CD90, and CD105 and faint expression of CD34, CD45, and HLA-DR. MTT assay revealed that 5 µM was the optimum concentration of cordycepin for all the assays. Concerning adipogenesis experiments, there was a statistically significant lowering of all the 4 adipogenesis-related genes PPARγ, FABP4, LPL, and C/EBPα following cordycepin treatment in the presence of induction compared to the only induction group and untreated control cells (p < 0.05). In connection with osteogenesis, was found that there was a statistically significant increase in the expression of RUNX2, COL1A1, OSX and OCN genes along with the increase in alkaline phosphatase and alizarin red staining in the DPSC treated with cordycepin along with the presence of induction and simultaneous addition of PDTC compared to the control untreated cells and cells treated with induction and simultaneous addition of PDTC (p < 0.05). CONCLUSION: cordycepin can be exploited for its osteopromotive properties and can be used as a bioactive molecule alongside the administration of dental pulp stem cells in the area of regenerative biology and medicine.
RESUMEN
Two cases are reported to present the "Burrow platform" (BP) technique. The BP technique uses a partial platform for retrieving instrument fragments, thereby reducing the loss of radicular dentin.The BP technique is a microscope-aided approach implementing coated ultrasonic tips to create an access to instrument fragments in the middle and apical thirds of the root canal. The technique consists of 4 steps: (1) coronal access, (2) radicular access, (3) partial platform, and (4) exposure of the fragment and retrieval. A precise, angulated access pathway is specific to the BP technique. In the coronal half, the radicular access pathway extends toward the outer wall of the curvature. In the apical half, the radicular access pathway is oriented toward the inside of the curvature. One and 4 instrument fragments were successfully retrieved in the respective cases. At follow-up, all teeth were asymptomatic and had responded favorably to the treatment.The BP technique may present a suitable alternative to fragment removal from curved canals and slender roots to avoid ledge formation, transportation, and perforation. Instrument retrieval using the BP technique can be performed using commonly available armamentarium.
Asunto(s)
Cuerpos Extraños , Preparación del Conducto Radicular , Cavidad Pulpar/diagnóstico por imagen , Cavidad Pulpar/cirugía , Falla de Equipo , Femenino , Humanos , Masculino , Persona de Mediana Edad , Tratamiento del Conducto RadicularRESUMEN
PURPOSE: Preschool children with early childhood caries (ECC) frequently exhibit extreme dental anxiety and fear, posing a considerable challenge to paediatric dentists for their treatment. The aim of this study was to evaluate the influence of silver diamine fluoride (SDF) treatment on the oral health-related quality of life (OHRQoL) of uncooperative preschool children using an Arabic version of the Early Childhood Oral Health Impact Scale (A-ECOHIS). MATERIALS AND METHODS: A pre-validated A-ECOHIS was used to assess the sensitivity and responsiveness. Fiftyone children, uncooperative with conventional dental care, underwent SDF treatment; their mothers answered the A-ECOHIS before and 4 weeks after treatment. Based on the global transition rating (GTR), the mothers rated their child's oral health condition following SDF treatment. RESULTS: SDF effectively arrested caries after 4 weeks in all children. There was a statistically significant reduction in mean scores of the total A-ECOHIS, child impact scale and family impact scores at follow-up (Wilcoxon signedrank test; p Ë 0.001). There were statistically significant changes in the mean GTR of children's oral health. CONCLUSIONS: A-ECOHIS was sensitive and responsive to SDF treatment. SDF statistically significantly improved the OHRQoL of uncooperative preschool children.