The Assessment of Resin-Based Composite Sealants' Effectiveness in Arresting Non-Cavitated Dentin Carious Lesions (ICDAS 3)-A 12 Month Follow-Up Preliminary Study.

Background and Objectives: The therapeutic management of carious lesions remains a significant focus for researchers, given their persistently high prevalence despite being largely preventable. This study aimed to compare the effectiveness of a composite resin-based sealant material in halting extended non-cavitated dentin carious lesions when used therapeutically versus preventively on caries-free teeth over a period of twelve months. Materials and Methods: out of the 236 children examined, 45 were excluded from the study due to non-compliance with the inclusion criteria. Thus, the study included 191 children aged 10-12 years, and 764 molars in total. Results: among these molars, 171 were caries-free (ICDAS II code 0), forming the Control group, while 180 molars were classified with an ICDAS II score of 3, forming the Study group. All molars were sealed and evaluated at 6- and 12-month follow-up intervals. Both intervals revealed statistically significant differences (p < 0.05) in sealant retention and carious lesion development between sound (ICDAS code 0) and decayed (ICDAS code 3) teeth. Conclusions: the findings did not support the effectiveness of sealants in halting non-cavitated dentin carious lesions classified as ICDAS II with code 3 compared to their preventive application in sound teeth classified as ICDAS II with code 0.

Association of Entamoeba gingivalis with Periodontal Disease-Systematic Review and Meta-Analysis.

The oral cavity is a habitat to a diverse range of organisms that make up an essential element of the human microbiota. There are up to 1000 species of micro-organisms capable of colonizing the mouth. Thirty percent of them are uncultivable. The genus Entamoeba includes several species, out of which at least seven of them are able to inhabit the human body (Entamoeba histolytica, Entamoeba dispar, Entamoeba moshkovskii, Entamoeba coli, Entamoeba polecki, Entamoeba hartmann, Entamoeba gingivalis). It was shown that only E. gingivalis is able to colonize the oral cavity. The aim of this study was to evaluate the association and prevalence of E. gingivalis in periodontal disease using two electronic database search engines. In order to have a broader view of the subject, a comprehensive manual search was conducted between 15th February 2023 and 1 April 2023 on these content aggregators and the initial search resulted in 277 articles using the keywords "E. gingivalis", "periodontitis", "E. gingivalis", "periodontal disease", "prevalence", and "incidence", in different combinations. The results showed that 755 patients were infected with E. gingivalis out of a total number of 1729 patients diagnosed with periodontal disease, indicating a global prevalence of 43% in the set of patients analyzed. E. gingivalis was prevalent in 58% of the patients that had gingivitis and in 44% of the patients with periodontitis. Prevalence of E. gingivalis based on gender was 43% in female patients and 47% in male patients. The results indicate that the higher incidence of E. gingivalis in people with periodontal disease compared to healthy people is more than just a sign of the disease; it could also be linked to the severity of the condition and the disease propensity to progress.

A Retrospective Histological Study on Palatal and Gingival Mucosa Changes during a Rapid Palatal Expansion Procedure.

The most common inflammatory reactions in the oral mucosa are found at the gingival level. The treatment of these inflammations requires, first of all, the removal of the causative factor; often, this maneuver is sufficient. The aim of this retrospective study was to evaluate clinical and histopathological changes that occur in terms of gingival and palatal mucosa enlargement during palatal expansion treatment and their evolution during treatment. Twenty-five (n = 25) research participants, aged between thirteen and twenty-six years old, were examined in this retrospective study. At the end of the treatment, fragments of tissue from the affected level were obtained via incisional biopsy and sent to the histopathology laboratory for a specialized examination. The changes identified were specific to mechanical traumatic injuries, thus excluding hyperplasia from other etiologies (infectious, tumoral, or non-mechanical traumatic). The examined fragments showed hyperplasia. The histopathological examination revealed the mechanical character of the lesion, strengthening the causal relationship between the insertion of the expander and the occurrence of hyperplasia of the palatal mucosa. The type of palatal expander influenced the degree of inflammation, with the severity of hyperplasia being more pronounced in the case of mini-implant-anchored rapid palatal expander (MARPE) usage than in the case of tooth-borne rapid palatal expander (RPE) usage. The analysis of the distance between the expander and the palatal mucosa did not provide conclusive results; the incidence and severity of the reaction were variable in patients with the same distance between the expander and the palatal or gingival mucosa.

White Spot Lesions (WSLs)-Post-Orthodontic Occurrence, Management and Treatment Alternatives: A Narrative Review.

Although treatment with fixed or mobile appliances has become an important part of modern orthodontics, side effects such as white spot lesions (WSLs) have a negative impact on the aesthetic outcome of orthodontic treatment. The purpose of this article was to review current evidence on the diagnosis, risk assessment, prevention, management and post-orthodontic treatment of these lesions. Data collection was performed electronically, and the initial search using the keywords "white spot lesions", "orthodontics", "WSL", "enamel" and "demineralization" in different combinations resulted in 1032 articles for the two electronic databases used. Ultimately, a total of 47 manuscripts were considered relevant to the aim of this research and included in this review. The results of the review indicate that WSLs remain a significant problem during orthodontic treatment. According to studies in the literature, the severity of WSLs correlates to the duration of treatment. Using toothpaste with more than 1000 ppm fluoride at home reduces the frequency of WSL separation and regular application of varnishes in the office reduces the frequency of the occurrence of WSLs only in the context of maintaining a strict hygiene regime. The old hypothesis that elastomeric ligatures retain more dental plaque than metal ones has been refuted. There are no differences in the appearance of WSLs between conventional brackets and self-ligating brackets. Clear aligner mobile devices develop fewer WSLs but are more extensive as opposed to conventional fixed devices, while lingual orthodontic appliances have a lower incidence of WSLs, and the most effective device for preventing these lesions is WIN, followed by Incognito.

Extra-Oral Three-Dimensional (3D) Scanning Evaluation of Three Different Impression Materials-An In Vitro Study.

Impression materials are used to record and reproduce the exact morphology of the patient's oral cavity. The dimensional stability of a material is its ability to maintain the accuracy of recording the details of the oral cavity for a longer period of time, including the time during imprinting and immediately after. The aim of this study was to evaluate the accuracy of three different impression materials commonly used in the dental practice with the aid of an extra-oral three-dimensional (3D) scanner using an in vitro analysis. A typodont tooth model of the maxillary dental arch and mandibular dental arch, containing 16 permanent teeth, was used for evaluation. With the aid of three different impression materials, this model was imprinted fifteen times, resulting in fifteen different plaster models. A capsule extra-oral scanner device was used to digitalize the models and the same device was later used to align, compare, and measure scanned model surfaces. After performing the Kruskal-Wallis test for each measurement category (model), only two out of the fifteen measurements showed statistically significant differences between the material groups: vestibular-oral and mesial-distal width. Post hoc analysis showed that the alginate model (mean range = 29.13) had significantly higher bias scores than the addition silicone model (mean range = 16.75) (z = 2.501, p = 0.037). The difference between the average values of the model bias made from condensation-based silicone and addition-based silicone was initially significant, but after applying the Bonferroni correction for further comparisons, this relationship did not remain significant (z = 2.197, p = 0.084). Addition-based silicone models had the highest accuracy in terms of fidelity, followed by condensation-based silicones, and then by alginate models. Silicone-based impression materials improved over time, being highly used in all areas of dentistry. Alginate impressions had the lowest pattern of accuracy among those studied.

The Assessment of Sealants' Effectiveness in Arresting Non-Cavitated Caries Lesion-A 24-Month Follow-Up.

Dental sealants are excellent means to prevent pits and fissure caries. Nowadays, the application of sealants is extended to therapeutic use in arresting non-cavitated carious lesions. This relatively new concept still lacks evidence to support its routine use. The aim of this study was to evaluate the effectiveness of a resin-based sealant applied on first permanent molars with carious lesions (ICDAS 1−3), in comparison with its effectiveness when applied on sound surfaces (ICDAS 0). Included in the study were 114 children aged between six and eight years old, with a high caries risk (according to the CAMBRA system), with all four permanent molars erupted and with deep pits and fissures. A total number of 407 molars were sealed and assessed. A total of 49 were excluded (they had caries, which according to the ICDAS II classification were classified with code 4−6 or had older sealants or fillings). Out of these 407 molars, 213 were sound (code 0) and 194 had caries lesions as follows: 56 teeth classified as code 1, 79 teeth classified as code 2, and 59 teeth classified as code 3 according to the ICDAS II classification. The retention of the sealant and carious lesions were assessed clinically at 6, 12, 18, and 24 months. Regarding sealant retention, a statistically significant difference (p < 0.05) among the two types of sealed teeth, sound (ICDAS 0) and decayed (ICDAS 3), showed at 18- and 24-month follow-up intervals. Regarding caries lesions, a statistically significant difference (p < 0.05) showed between sound (ICDAS 0) and decayed (ICDAS 3) molars at 24-month follow-up. Our study results supported the resin-based sealant effectiveness in arresting incipient carious lesions, which according to the ICDAS II classification have received codes 1 and 2 but did not support sealant effectiveness in arresting caries lesions classified according to the same classification with code 3.

Prevalence and Manifestations of Dental Ankylosis in Primary Molars Using Panoramic X-rays: A Cross-Sectional Study.

Dental ankylosis is a serious condition defined as the process that causes the fusion between the dentin or the cementum of the root and the alveolar bone, with the obliteration of the periodontal ligament becoming progressively replaced by bone tissue. The aim of the study was to determine the prevalence, location, severity, and association of dental ankylosis in primary molars with other dental anomalies such as the agenesis of permanent buds. For this study 150 panoramic x-rays were selected from patients with temporary or mixed dentition, aged six to twelve years old, from a private dentistry office and from the Pediatric Dentistry Department of UMFST in Targu-Mures, Romania. In order to identify the cases with dental ankylosis, the presence and severity of the infraocclusion, displacements of the neighboring teeth, the appearance of the root area, and the relationship with the bone tissue were examined. For evaluation of the categorical data we used Fischer's exact test and the Chi-squared test and the chosen significance level was set at 0.05. The results showed that the highest percentage of cases with ankylosis was found in the first group (six to nine years old), respectively, with 72% of cases compared with the second group (ten to twelve years old) with 28% of cases. Findings showed that there was no positive association between dental ankylosis and gender, but a strong correlation was found regarding the location on the dental arches. Most cases were identified on the lower arch with a higher percentage in quadrant three. Of the two primary molars, the most affected by ankylosis was the first molar in quadrant three, followed by the second molar, and finally the first molar in quadrant four. Most cases diagnosed with ankylosis had a mild to moderate degree of infraocclusion; therefore, changes in the functional balance of the dental arch and on neighboring teeth were insignificant. There were some differences obtained between our results and studies from the literature, especially regarding the localization in the lower left dental arch, but these differences can be attributed to the number of the subjects selected and from the methodology of dental ankylosis diagnosis. Based on the data obtained, it was concluded that ankylosis is a dental condition which occurs in children in early mixed dentition, especially in the lower arch, with the first primary molar being the most affected tooth. The presence of infraocclusion and the absence of dental mobility, especially during the stage of primary molars' root resorption, are the main signs which must be followed to make an early diagnosis and prevent further complications.

Comparative Assessment of Retention and Caries Protective Effectiveness of a Hydrophilic and a Conventional Sealant-A Clinical Trial.

Sealants are highly efficient and the most secure method for the prevention of caries lesions from pits and fissures in recently erupted permanent teeth. The aim of this study is to clinically assess and compare the retention and evolution of caries of a moisture-tolerant resin-based sealant with a conventional hydrophobic resin-based sealant. Material and method: We have included in the study 28 children with between 6 and 8 years old. For each child we sealed 4 permanent molars (a total of 112 teeth). The study group was divided into two subgroups: the Embrace Group­consisting of 56 first permanent molars that underwent dental sealing with moisture-tolerant resin-based fissure sealant (Embrace™ WetBond™ Pulpdent, Watertown, MA, USA) and the Helioseal Group­represented by the same number of 56 first permanent molars that were sealed with conventional hydrophobic resin-based sealant (Helioseal F™, Ivoclar Vivadent Schaan, Liechtenstein). The retention and the incidence of new carious lesions of each sealant were assessed clinically at 6, 12, 18, and 24 months. Results: The 12-month follow-up assessment showed perfect integrity in 50 molars (89.28%) sealed with moisture-tolerant resin-based material (Embrace Group), and in 51 molars (91.07%) with conventional resin-based sealant (Helioseal Group). At the 24-month recall, the retention was maintained in 44 molars (78.57%) in the Embrace Group and in 45 molars (80.35%) in the Helioseal Group, respectively. The follow-up assessments showed no statistically significant differences (p > 0.5) between the two materials regarding sealant retention. First evidence of new carious lesions was present at 12 months on two molars sealed with Embrace WetBond and on one molar sealed with Helioseal. At the 24-month evaluation, the prevalence of caries in the Embrace Group was 7.14% (four caries) and 3.56% (two caries) in the Helioseal Group. Moreover, there were no statistically significant differences (p > 0.05) between the two materials regarding new caries development at any of the follow-up assessments. Conclusions: Moisture-tolerant resin-based sealant was effective in terms of retention and caries prevention.

Retention Ability of a Glass Carbomer Pit and Fissure Sealant.

Dental sealants are an excellent means to prevent pits and fissure decay. Currently, there are multiple commercially available sealant materials. The purpose of this study was to assess the retention of glass carbomer fissure sealant and the incidence of secondary caries over a period of 24 months in comparison with a resin-based sealant. MATERIALS AND METHODS: We included 32 children in the study, with ages between six and eight years and an average age of 6.8 years old. For each child, we sealed four permanent molars (totaling 128 teeth). The study group was divided into sub-groups. Sub-group A was represented by 64 first permanent molars which underwent dental sealing procedures with composite resin-based fissure sealant, Helioseal F™, and sub-group B was represented by 64 first permanent molars which underwent dental sealing procedures with glass carbomer cement, GCP Glass Seal™. The sealants were assessed clinically at 6, 12, 18, and 24 months. RESULTS: The 6-month follow-up evaluation showed no statistically significant differences between the two materials neither regarding sealant retention nor new carious lesions formation (p > 0.05). At the 12-month recall, 57 molars had good retention (89.06%) from sub-group A and 44 molars (68.75%) from sub-group B; there was a statistically significant difference (p = 0.0187) between the two treatment choices only regarding material retention. At the last recall after 2 years, sub-group A had a higher number of molars with perfect sealing (47-73.43%) and 8 molars (12.5%) with new caries lesions and sub-group B had 23 (35.93%) molars with perfect sealing and 15 molars (23.44%) with new caries lesions; there was a statistically significant difference (p < 0.0001) between the two treatment choices only regarding material retention. CONCLUSIONS: The glass carbomer retention is very inferior to the resin-based material. The glass carbomer sealant was effective in preventing new caries development, comparable with the conventional resin-based sealant.

Observational Study Regarding Possible Side Effects of Miniscrew-Assisted Rapid Palatal Expander (MARPE) with or without the Use of Corticopuncture Therapy.

The use of maxillary expanders has the effect of distancing the maxillary bones at the level of the median palatal suture. During maxillary expansion, the main resistance forces occur at the zygomatico-maxillary sutures, and not in the median palatal suture, which is the basic principle on which this method is based. In this observational study, we evaluated possible complications at the skeletal and dentoalveolar level after palatal split using miniscrew-assisted rapid palatal expansion (MARPE) associated or not with corticopuncture (CP) therapy. The study included 27 patients with maxillary transverse deficiency and unilateral or bilateral cross-bite. Skeletal and dentoalveolar changes were evaluated using cone beam computed tomography (CBCT) images acquired before and after expansion. The mid-palatal suture was separated in 88.88% of cases, buccal bone height of the alveolar crest had decreased at first molar both at oral and palatal level by approximately 2.07 mm in 40.7% of cases whilst the remaining 59.3% showed insignificant bone loss, with canines exhibiting buccal tipping of 4.10° in 62.5% of cases. Changes of the occlusal planes were observed in 10 cases (37%). Maxillary canines tended to show symmetric buccal inclinations relative to the maxillary basal bone. Six patients; 22.22% showed hypertrophy/hyperplasia of the palatal mucosa associated with ulcerations, erythema, itching, and discomfort in the area. Swelling at the mid-palatal suture after split was observed in all cases and was caused by the resultant force. No cases of necrosis of the palatal mucosa were observed. Although occlusal modifications occur after palatal split, especially in unilateral cross-bite cases, these changes can be treated with the help of fixed orthodontic appliances.

Observational Study Regarding the Relationship between Nutritional Status, Dental Caries, Mutans Streptococci, and Lactobacillus Bacterial Colonies.

The prevalence of dental caries and obesity is high as both raise significant health problems. The objective of this study was to evaluate the relationship between dental caries, the number of salivary colonies forming units of Mutans Streptococci (MS) and Lactobacillus (LB), and the nutritional status in a group of children from Transylvania. This observational study used a sample of 154 school children, aged 9 to 12 years. The prevalence of caries was measured using the decayed, missing, and filled teeth index for deciduous teeth (dmft index) and for permanent teeth (DMFT index). Height and weight were assessed for each subject, and their body mass index (BMI) percentile was calculated. Salivary levels of Mutans Streptococci (MS) and Lactobacillus (LB) were determined using the CRT Bacteria Test from Ivoclar Vivadent. In our study, we found a positive association between the BMI percentile, MS count, LB count, tooth brushing frequency, and the incidence of dental caries in children aged 9 to 12 years old. Future preventive programs should include nutrition control in order to prevent both the apparition of dental caries and obesity in children.

Accuracy of Three-Dimensional (3D) Printed Dental Digital Models Generated with Three Types of Resin Polymers by Extra-Oral Optical Scanning.

Digital impression devices are used alternatively to conventional impression techniques and materials. The aim of this study was to evaluate the precision of extraoral digitalization of three types of photosensitive resin polymers used for 3D printing with the aid of a digital extraoral optical scanner. The alignment of the scans was performed by a standard best-fit alignment. Trueness and precision were used to evaluate the models. The trueness was evaluated by using bias as a measure and the standard deviation was used to evaluate the precision. After assessing the normality of the distributions, an independent Kruskal-Wallis test was used to compare the trueness and precision across the material groups. The Mann-Whitney test was used as a post-hoc test for significant differences. The result of the analysis showed significant differences (U = 66, z = -2.337, p = 0.019) in trueness of mesiodistal distances. Upon visual inspection of the models, defects were noticed on two out of nine of the models printed with a photosensitive polymer. The defects were presented as cavities caused by air bubbles and were also reflected in the scans. Mean precision did not vary too much between these three photosensitive polymer resins, therefore, the selection of 3D printing materials should be based on the trueness and the required precision of the clinical purpose of the model.

Clinical Studies Regarding Electromagnetic Stimulation in Proximity of Dental Implants on Patients with/without Orthodontic Treatment.

As a result of the loss of a tooth, there is a decrease in trabecular bone and loss of height and width of the adjacent bone. This study was designed as an observational imaging study, regarding structural changes that may occur during healing after the placement of Titanium dental implants. For this purpose, Cone Beam Computed Tomography was used in order to determine bone modifications around dental implants, loaded either with conventional healing caps or with healing caps pulsating electromagnetic waves, Magdent™, Haifa, Israel. The mean age of the study population was 49.84 ± 3.29 years (95% confidence interval (CI): 46.55-53.13). According to the voxel measurements after conventional treatment, there was a significant difference p < 0.0001 between bone radiodensity before treatment 288.1 ± 47.16 Standard Deviation (SD), and bone radiodensity 688.1 ± 81.02 SD after treatment with conventional healing caps. According to the voxel measurements after treatment with MagdentMed™ pulse electromagnetic healing caps, there was a significant difference p < 0.0001 between bone radiodensity before treatment 310.7 ± 53.26 SD and bone radiodensity after treatment with MED caps 734 ± 61.96 SD. The most common result of our study was a slightly higher radiodensity nearest the interface of dental implants after treatment.