RESUMEN
The study represents new bioanalytical characterization of mainly organic components of the poorly investigated extracellular polymeric substances (EPS) of the enigmatic diatom Didymosphenia geminata, an invasive, worldwide expanding species endangering diverse ecosystems. This microalga attaches its siliceous cells to rocky substrates using fibrous stalks, which are made of an EPS-based matrix stabilized by crystalline calcite. The EPS were analyzed using selected methods, including microscopic, spectroscopic, and spectrometric techniques. We identified diverse types of biomolecules. The presence of lipids, condensed aromatics, and heteroaromatic compounds in the EPS has been confirmed using high-resolution mass spectrometry (HR-MS). Additionally, both sulfur-containing functionalities and carboxylic acids were determined too using infrared (IR) spectroscopy and nuclear magnetic resonance (NMR) spectroscopy. For the first time, lignin compounds have been detected as one of the components of the EPS of the D. geminata diatom, using HR-MS and fluorescence microscopy (FM) in combination with specific staining techniques. By increasing the understanding of the chemistry and structural features of the stalks, we aim to develop potential applications and methods for removing these stalks from affected regions in the future, or, alternatively, to use them as a large-scale source of sustainable biocomposite material.
Asunto(s)
Diatomeas , Diatomeas/química , Espectroscopía de Resonancia Magnética/métodos , Espectrometría de Masas/métodos , Matriz Extracelular de Sustancias Poliméricas/química , Matriz Extracelular de Sustancias Poliméricas/metabolismo , Microscopía Fluorescente/métodosRESUMEN
Extracellular polymeric substances (EPS) are produced by microorganisms and interact to form a complex matrix called biofilm. In soils, EPS are important contributors to the microbial necromass and, thus, to soil organic carbon (SOC). Amino sugars (AS) are used as indicators for microbial necromass in soil, although the origin of galactosamine and mannosamine is largely unknown. However, indications exist that they are part of EPS. In this study, two bacteria and two fungi were grown in starch medium either with or without a quartz matrix to induce EPS production. Each culture was separated in two fractions: one that directly underwent AS extraction (containing AS from both biomass and EPS), and another that first had EPS extracted, followed then by AS determination (exclusively containing AS from EPS). We did not observe a general effect of the quartz matrix neither of microbial type on AS production. The quantified amounts of galactosamine and mannosamine in the EPS fraction represented on average 100% of the total amounts of these two AS quantified in cell cultures, revealing they are integral parts of the biofilm. In contrast, muramic acid and glucosamine were also quantified in the EPS, but with much lower contribution rates to total AS production, of 18% and 33%, respectively, indicating they are not necessarily part of EPS. Our results allow a meaningful ecological interpretation of mannosamine and galactosamine data in the future as indicators of microbial EPS, and also attract interest of future studies to investigate the role of EPS to SOC and its dynamics.
RESUMEN
In recent years, the potential of lignins as a resource for material-based applications has been highlighted in many scientific and nonscientific publications. But still, to date, a lack of detailed structural knowledge about this ultracomplex biopolymer undermines its great potential. The chemical complexity of lignin demands a combination of different, powerful analytical methods, in order to obtain these necessary information. In this paper, we demonstrate a multispectroscopic approach using liquid-state and solid-state Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR-MS) and nuclear magnetic resonance (NMR) spectroscopy to characterize a fractionated LignoBoost lignin. Individual FT-ICR-MS, tandem MS, and NMR results helped to determine relevant information about the different lignin fractions, such as molecular weight distributions, oligomer sizes, linkage types, and presence of specific functional groups. In addition, a hetero spectroscopic correlation approach was applied to chemometrically combine MS, MS/MS, and NMR data sets. From these correlation analyses, it became obvious that a combination of tandem MS and NMR data sets gives the opportunity to comprehensively study and describe the general structure of complex biopolymer samples. Compound-specific structural information are obtainable, if this correlation approach is extended to 1D-MS and NMR data, as specific functional groups or linkages are verifiable for a defined molecular formula. This enables structural characterization of individual lignin compounds without the necessity for tandem MS experiments. Hence, these correlation results significantly improve the depth of information of each individual analysis and will hopefully help to structurally elucidate entire lignin structures in the near future.
RESUMEN
The structural biopolymer spongin in the form of a 3D scaffold resembles in shape and size numerous species of industrially useful marine keratosan demosponges. Due to the large-scale aquaculture of these sponges worldwide, it represents a unique renewable source of biological material, which has already been successfully applied in biomedicine and bioinspired materials science. In the present study, spongin from the demosponge Hippospongia communis was used as a microporous template for the development of a new 3D composite containing goethite [α-FeO(OH)]. For this purpose, an extreme biomimetic technique using iron powder, crystalline iodine, and fibrous spongin was applied under laboratory conditions for the first time. The product was characterized using SEM and digital light microscopy, infrared and Raman spectroscopy, XRD, thermogravimetry (TG/DTG), and confocal micro X-ray fluorescence spectroscopy (CMXRF). A potential application of the obtained goethite-spongin composite in the electrochemical sensing of dopamine (DA) in human urine samples was investigated, with satisfactory recoveries (96% to 116%) being obtained.
RESUMEN
Marine sponges of the subclass Keratosa originated on our planet about 900 million years ago and represent evolutionarily ancient and hierarchically structured biological materials. One of them, proteinaceous spongin, is responsible for the formation of 3D structured fibrous skeletons and remains enigmatic with complex chemistry. The objective of this study was to investigate the interaction of spongin with iron ions in a marine environment due to biocorrosion, leading to the occurrence of lepidocrocite. For this purpose, a biomimetic approach for the development of a new lepidocrocite-containing 3D spongin scaffold under laboratory conditions at 24 °C using artificial seawater and iron is described for the first time. This method helps to obtain a new composite as "Iron-Spongin", which was characterized by infrared spectroscopy and thermogravimetry. Furthermore, sophisticated techniques such as X-ray fluorescence, microscope technique, and X-Ray diffraction were used to determine the structure. This research proposed a corresponding mechanism of lepidocrocite formation, which may be connected with the spongin amino acids functional groups. Moreover, the potential application of the biocomposite as an electrochemical dopamine sensor is proposed. The conducted research not only shows the mechanism or sensor properties of "Iron-spongin" but also opens the door to other applications of these multifunctional materials.
Asunto(s)
Hierro , Poríferos , Animales , Biomimética , DopaminaRESUMEN
Climate change requires enhanced autonomous temperature monitoring during logistics/transport. A cheap approach comprises the use of temperature-sensitive copolymers that undergo temperature-induced irreversible coagulation. The synthesis/characterization of pentablock copolymers (PBCP) starting from poloxamer PEO130-b-PPO44-b-PEO130 (poly(ethylene oxide)130-b-poly(propylene oxide)44-b-poly(ethylene oxide)130) and adding two terminal qPDMAEMA85 (quaternized poly[(2-dimethylamino)ethyl methacrylate]85) blocks is presented. Mixing of PBCP solutions with hexacyanoferrate(III)/ferricyanide solutions leads to a reduction of the decane/water interfacial tension accompanied by a co/self-assembly toward flower-like micelles in cold water because of the formation of an insoluble/hydrophobic qPDMAEMA/ferricyanide complex. In cold water, the PEO/PPO blocks provide colloidal stability over months. In hot water, the temperature-responsive PPO block is dehydrated, leading to a pronounced temperature dependence of the oil-water interfacial tension. In solution, the sticky PPO segments exposed at the micellar corona cause a colloidal clustering above a certain threshold temperature, which follows Smoluchowski-type kinetics. This coagulation remains for months even after cooling, indicating the presence of a kinetically trapped nonequilibrium state for at least one of the observed micellar structures. Therefore, the system memorizes a previous suffering of heat. This phenomenon is linked to an exchange of qPDMAEMA-blocks bridging the micellar cores after PPO-induced clustering. The addition of ferrous ions hampers the exchange, leading to the reversible coagulation of Prussian blue loaded micelles. Hence, the Fe2+ addition causes a shift from history monitoring to the sensing of the present temperature. Presumably, the system can be adapted for different temperatures in order to monitor transport and storage in a simple way. Hence, these polymeric "flowers" could contribute to preventing waste and sustaining the quality of goods (e.g., food) by temperature-induced bouquet formation, where an irreversible exchange of "tentacles" between the flowers stabilizes the bouquet at other temperatures as well.
RESUMEN
Confocal micro X-ray fluorescence (CMXRF) spectroscopy is a non-destructive, depth-resolved, and element-specific technique that is used to analyze the elemental composition of a sample. For this, a focused beam of mono- or polychromatic X-rays is applied to excite the atoms in the sample, causing them to emit fluorescence radiation which is detected with focusing capillary optics. The confocal design of the instrument allows for depth-resolved analysis, in most cases with a resolution in the lower micrometer dimension after collecting X-rays from a predefined volume within the sample. The element-specific nature of the technique allows information to be obtained about the presence and concentration of specific elements in this volume. This makes CMXRF spectroscopy a valuable tool for a wide range of applications, especially when samples with an inhomogeneous distribution of elements and a relatively light matrix have to be analyzed, which are typical examples in materials science, geology, and biology. The technique is also commonly used in the art and archaeology fields to analyze the elemental composition of historical artifacts and works of art, helping to provide valuable insights into their provenance, composition, and making. Recent technical developments to increase sensitivity and efforts to improve quantification in three-dimensional samples will encourage wider use of this method across a multitude of fields of application in the near future. Confocal micro X-ray fluorescence (CMXRF) is based on the confocal overlap of two polycapillary lens foci, creating a depth-sensitive and non-destructive probing volume. Three-dimensional resolved element distribution images can be obtained by measuring the fluorescence intensity as function of the three-dimensional position.
RESUMEN
Structural bioinspiration in modern material science and biomimetics represents an actual trend that was originally based on the bioarchitectural diversity of invertebrate skeletons, specifically, honeycomb constructs of natural origin, which have been in humanities focus since ancient times. We conducted a study on the principles of bioarchitecture regarding the unique biosilica-based honeycomb-like skeleton of the deep-sea glass sponge Aphrocallistes beatrix. Experimental data show, with compelling evidence, the location of actin filaments within honeycomb-formed hierarchical siliceous walls. Principles of the unique hierarchical organization of such formations are discussed. Inspired by poriferan honeycomb biosilica, we designed diverse models, including 3D printing, using PLA-, resin-, and synthetic-glass-prepared corresponding microtomography-based 3D reconstruction.
RESUMEN
(1) The nutritional quality of strawberry (Fragaria × ananassa Duch) fruits, among others, is largely maintained by the presence of soluble sugars and organic acids. As the primary products of photosynthesis, they are energy depots in plants, necessary for the construction of cell constituents, but also serve as precursors of aromatic compounds and signaling molecules. (2) In this study, fruits of 25 strawberry cultivars were qualitatively and quantitatively characterized concerning individual sugars and organic acids by HPLC, FT-ICR-MS, and MS imaging analysis. In addition, the total quality index (TQI), as a novel mathematical model, was used to compare all individual parameters evaluated to obtain a quantitative single score, as an indicator of overall fruit quality. (3) Regardless of a large number of cultivars and monitored parameters that were studded, several cultivars stood out in terms of selected primary metabolites, such as 'Rumba', 'Jeny', and 'Sandra', while the latter had the best TQI score. (4) Intercultivar variations in sugars and organic acids profiles, along with other bioactive compounds, should be considered for selection of promising cultivars with improved naturally occurring nutraceutical traits. Besides the search for a pleasant taste, increased awareness of healthy nutrition resulted in heightening consumer demand for high-quality fruit.
RESUMEN
AIMS: Heart failure (HF) after myocardial infarction (MI) is a major cause of morbidity and mortality. We sought to investigate the functional importance of cardiac iron status after MI and the potential of pre-emptive iron supplementation in preventing cardiac iron deficiency (ID) and attenuating left ventricular (LV) remodelling. METHODS AND RESULTS: MI was induced in C57BL/6J male mice by left anterior descending coronary artery ligation. Cardiac iron status in the non-infarcted LV myocardium was dynamically regulated after MI: non-haem iron and ferritin increased at 4 weeks but decreased at 24 weeks after MI. Cardiac ID at 24 weeks was associated with reduced expression of iron-dependent electron transport chain (ETC) Complex I compared with sham-operated mice. Hepcidin expression in the non-infarcted LV myocardium was elevated at 4 weeks and suppressed at 24 weeks. Hepcidin suppression at 24 weeks was accompanied by more abundant expression of membrane-localized ferroportin, the iron exporter, in the non-infarcted LV myocardium. Notably, similarly dysregulated iron homeostasis was observed in LV myocardium from failing human hearts, which displayed lower iron content, reduced hepcidin expression, and increased membrane-bound ferroportin. Injecting ferric carboxymaltose (15 µg/g body weight) intravenously at 12, 16, and 20 weeks after MI preserved cardiac iron content and attenuated LV remodelling and dysfunction at 24 weeks compared with saline-injected mice. CONCLUSION: We demonstrate, for the first time, that dynamic changes in cardiac iron status after MI are associated with local hepcidin suppression, leading to cardiac ID long term after MI. Pre-emptive iron supplementation maintained cardiac iron content and attenuated adverse remodelling after MI. Our results identify the spontaneous development of cardiac ID as a novel disease mechanism and therapeutic target in post-infarction LV remodelling and HF.
Asunto(s)
Insuficiencia Cardíaca , Deficiencias de Hierro , Infarto del Miocardio , Masculino , Ratones , Humanos , Animales , Hepcidinas/metabolismo , Hepcidinas/uso terapéutico , Hierro/metabolismo , Hierro/uso terapéutico , Ratones Endogámicos C57BL , Miocardio/metabolismo , Insuficiencia Cardíaca/metabolismo , Suplementos Dietéticos , Remodelación VentricularRESUMEN
Open-porous scaffolds made of W4 and WZ21 fibres were evaluated to analyse their potential as an implant material. WZ21 scaffolds without any surface modification or coating, showed promising mechanical properties which were comparable to the W4 scaffolds tested in previous studies. Eudiometric testing results were dependent on the experimental setup, with corrosion rates differing by a factor of 3. Cytotoxicity testing of WZ21 showed sufficient cytocompatibility. The corrosion behavior of the WZ21 scaffolds in different cell culture media are indicating a selective dealloying of elements from the magnesium scaffold by different solutions. Long term in-vivo studies were using 24 W4 scaffolds and 12 WZ21 scaffolds, both implanted in rabbit femoral condyles. The condyles and important inner organs were explanted after 6, 12 and 24 weeks and analyzed. The in-vivo corrosion rate of the WZ21 scaffolds calculated by microCT-based volume loss was up to 49 times slower than the in-vitro corrosion rate based on weight loss. Intramembranous bone formation within the scaffolds of both alloys was revealed, however a low corrosion rate and formation of gas cavities at initial time points were also detected. No systemic or local toxicity could be observed. Investigations by µ-XRF did not reveal accumulation of yttrium in the neighboring tissue. In summary, the magnesium scaffold´s performance is biocompatible, but would benefit from a surface modification, such as a coating to obtain lower the initial corrosion rates, and hereby establish a promising open-porous implant material for load-bearing applications. STATEMENT OF SIGNIFICANCE: Magnesium is an ideal temporary implant material for non-load bearing applications like bigger bone defects, since it degrades in the body over time. Here we developed and tested in vitro and in a rabbit model in vivo degradable open porous scaffolds made of sintered magnesium W4 and WZ21 short fibres. These scaffolds allow the ingrowth of cells and blood vessels to promote bone healing and regeneration. Both fibre types showed in vitro sufficient cytocompatibility and proliferation rates and in vivo, no systemic toxicity could be detected. At the implantation site, intramembranous bone formation accompanied by ingrowth of supplying blood vessels within the scaffolds of both alloys could be detected.
Asunto(s)
Aleaciones , Magnesio , Aleaciones/farmacología , Animales , Corrosión , Magnesio/farmacología , Ensayo de Materiales , Osteogénesis , Porosidad , ConejosRESUMEN
Marine sponges were among the first multicellular organisms on our planet and have survived to this day thanks to their unique mechanisms of chemical defense and the specific design of their skeletons, which have been optimized over millions of years of evolution to effectively inhabit the aquatic environment. In this work, we carried out studies to elucidate the nature and nanostructural organization of three-dimensional skeletal microfibers of the giant marine demosponge Ianthella basta, the body of which is a micro-reticular, durable structure that determines the ideal filtration function of this organism. For the first time, using the battery of analytical tools including three-dimensional micro-X-ray Fluorescence (3D-µXRF), X-ray diffraction (XRD), infra-red (FTIR), Raman and Near Edge X-ray Fine Structure (NEXAFS) spectroscopy, we have shown that biomineral calcite is responsible for nano-tuning the skeletal fibers of this sponge species. This is the first report on the presence of a calcitic mineral phase in representatives of verongiid sponges which belong to the class Demospongiae. Our experimental data suggest a possible role for structural amino polysaccharide chitin as a template for calcification. Our study suggests further experiments to elucidate both the origin of calcium carbonate inside the skeleton of this sponge and the mechanisms of biomineralization in the surface layers of chitin microfibers saturated with bromotyrosines, which have effective antimicrobial properties and are responsible for the chemical defense of this organism. The discovery of the calcified phase in the chitinous template of I. basta skeleton is expected to broaden the knowledge in biomineralization science where the calcium carbonate is regarded as a valuable material for applications in biomedicine, environmental science, and even in civil engineering.
Asunto(s)
Organismos Acuáticos/química , Carbonato de Calcio/química , Poríferos/química , Esqueleto/química , Animales , Biomineralización , Quitina/química , Espectroscopía Infrarroja por Transformada de Fourier , Andamios del Tejido/química , Difracción de Rayos XRESUMEN
The design of new composite materials using extreme biomimetics is of crucial importance for bioinspired materials science. Further progress in research and application of these new materials is impossible without understanding the mechanisms of formation, as well as structural features at the molecular and nano-level. It presents a challenge to obtain a holistic understanding of the mechanisms underlying the interaction of organic and inorganic phases under conditions of harsh chemical reactions for biopolymers. Yet, an understanding of these mechanisms can lead to the development of unusual-but functional-hybrid materials. In this work, a key way of designing centimeter-scale macroporous 3D composites, using renewable marine biopolymer spongin and a model industrial solution that simulates the highly toxic copper-containing waste generated in the production of printed circuit boards worldwide, is proposed. A new spongin-atacamite composite material is developed and its structure is confirmed using neutron diffraction, X-ray diffraction, high-resolution transmission electron microscopy/selected-area electron diffraction, X-ray photoelectron spectroscopy, near-edge X-ray absorption fine structure spectroscopy, and electron paramagnetic resonance spectroscopy. The formation mechanism for this material is also proposed. This study provides experimental evidence suggesting multifunctional applicability of the designed composite in the development of 3D constructed sensors, catalysts, and antibacterial filter systems.
Asunto(s)
Materiales Biomiméticos/química , Biopolímeros/química , Cloruros/química , Cobre/química , Nanocompuestos/química , Contaminación Química del Agua/prevención & control , Amoníaco/química , Catálisis , Humanos , Conformación Molecular , Oxidación-Reducción , Porosidad , Impresión Tridimensional , Relación Estructura-ActividadRESUMEN
The influence of amount of intermetallics on the degradation of as-extruded Mg-Nd alloys with different contents of Nd was investigated via immersion testing in DMEM+10% FBS under cell culture conditions and subsequent microstructural characterizations. It is found that the presence of intermetallic particles Mg41Nd5 affects the corrosion of Mg-Nd alloys in two conflicting ways. One is their negative role that their existence enhances the micro-galvanic corrosion. Another is their positive role. Their existence favours the formation of a continuous and compact corrosion layer. At the early stage of immersion, their negative role predominated. The degradation rate of Mg-Nd alloys monotonously increases with increasing the amount of intermetallics. Mg-5Nd alloy with maximum amount of intermetallics suffered from the most severe corrosion. With the immersion proceeding (≥7 days), then the positive role of these intermetallic particles Mg41Nd5 could not be neglected. Owing to the interaction between their positive and negative roles, at the later stage of immersion the corrosion rate of Mg-Nd alloys first increases with increasing the content of Nd, then reaches to the maximum at 2 wt. % Nd. With a further increase of Nd content, a decrease in corrosion rate occurs. The main corrosion products on the surfaces of Mg-Nd alloys include carbonates, calcium-phosphate, neodymium oxide and/or neodymium hydroxide. They are amorphous at the early stage of immersion. With the immersion proceeding, they are transformed to crystalline. The existence of undegradable Mg41Nd5 particles in the corrosion layer can enhance the crystallization of such amorphous corrosion products.
Asunto(s)
Aleaciones , Magnesio , Corrosión , Ensayo de MaterialesRESUMEN
Variable interfacial tension could be desirable for many applications. Beyond classical stimuli like temperature, we introduce an electrochemical approach employing polymers. Hence, aqueous solutions of the nonionic-cationic block copolymer poly(ethylene oxide)114-b-poly{[2-(methacryloyloxy)ethyl]diisopropylmethylammonium chloride}171 (i.e., PEO114-b-PDPAEMA171 with a quaternized poly(diisopropylaminoethyl methacrylate) block) were investigated by emerging drop measurements and dynamic light scattering, analyzing the PEO114-b-qPDPAEMA171 impact on the interfacial tension between water and n-decane and its micellar formation in the aqueous bulk phase. Potassium hexacyanoferrates (HCFs) were used as electroactive complexants for the charged block, which convert the bishydrophilic copolymer into amphiphilic species. Interestingly, ferricyanides ([Fe(CN)6]3-) act as stronger complexants than ferrocyanides ([Fe(CN)6]4-), leading to an insoluble qPDPAEMA block in the presence of ferricyanides. Hence, bulk micellization was demonstrated by light scattering. Due to their addressability, in situ redox experiments were performed to trace the interfacial tension under electrochemical control, directly utilizing a drop shape analyzer. Here, the open-circuit potential (OCP) was changed by electrolysis to vary the ratio between ferricyanides and ferrocyanides in the aqueous solution. While a chemical oxidation/reduction is feasible, also an electrochemical oxidation leads to a significant change in the interfacial tension properties. In contrast, a corresponding electrochemical reduction showed only a slight response after converting ferricyanides to ferrocyanides. Atomic force microscopy (AFM) images of the liquid/liquid interface transferred to a solid substrate showed particles that are in accordance with the diameter from light scattering experiments of the bulk phase. In conclusion, the present results could be an important step toward economic switching of interfaces suitable, e.g., for emulsion breakage.
RESUMEN
AIMS: Low cardiac iron levels promote heart failure in experimental models. While cardiac iron concentration (CI) is decreased in patients with advanced heart failure with reduced ejection fraction (HFrEF), CI has never been measured in non-advanced HFrEF. We measured CI in left ventricular (LV) endomyocardial biopsies (EMB) from patients with non-advanced HFrEF and explored CI association with systemic iron status and disease severity. METHODS AND RESULTS: We enrolled 80 consecutive patients with non-ischaemic HFrEF with New York Heart Association class II or III symptoms and a median (interquartile range) LV ejection fraction of 25 (18-33)%. CI was 304 (262-373) µg/g dry tissue. CI was not related to immunohistological findings or the presence of cardiotropic viral genomes in EMBs and was not related to biomarkers of systemic iron status or anaemia. Patients with CI in the lowest quartile (CIQ1 ) had lower body mass indices and more often presented with heart failure histories longer than 6 months than patients in the upper three quartiles (CIQ2-4 ). CIQ1 patients had higher serum N-terminal pro-B-type natriuretic peptide levels than CIQ2-4 patients [3566 (1513-6412) vs. 1542 (526-2811) ng/L; P = 0.005]. CIQ1 patients also had greater LV end-diastolic (P = 0.001) and end-systolic diameter indices (P = 0.003) and higher LV end-diastolic pressures (P = 0.046) than CIQ2-4 patients. CONCLUSION: Low CI is associated with greater disease severity in patients with non-advanced non-ischaemic HFrEF. CI is unrelated to systemic iron homeostasis. The prognostic and therapeutic implications of CI measurements in EMBs should be further explored.
Asunto(s)
Insuficiencia Cardíaca , Hierro , Biomarcadores/metabolismo , Insuficiencia Cardíaca/metabolismo , Insuficiencia Cardíaca/fisiopatología , Humanos , Hierro/metabolismo , Miocardio/metabolismo , Índice de Severidad de la Enfermedad , Volumen Sistólico/fisiología , Función Ventricular IzquierdaRESUMEN
Cochlear and deep brain implants are prominent examples for neuronal prostheses with clinical relevance. Current research focuses on the improvement of the long-term functionality and the size reduction of neural interface electrodes. A promising approach is the application of carbon nanotubes (CNTs), either as pure electrodes but especially as coating material for electrodes. The interaction of CNTs with neuronal cells has shown promising results in various studies, but these appear to depend on the specific type of neurons as well as on the kind of nanotubes. To evaluate a potential application of carbon nanotube coatings for cochlear electrodes, it is necessary to investigate the cytocompatibility of carbon nanotube coatings on platinum for the specific type of neuron in the inner ear, namely spiral ganglion neurons. In this study we have combined the chemical processing of as-delivered CNTs, the fabrication of coatings on platinum, and the characterization of the electrical properties of the coatings as well as a general cytocompatibility testing and the first cell culture investigations of CNTs with spiral ganglion neurons. By applying a modification process to three different as-received CNTs via a reflux treatment with nitric acid, long-term stable aqueous CNT dispersions free of dispersing agents were obtained. These were used to coat platinum substrates by an automated spray-coating process. These coatings enhance the electrical properties of platinum electrodes, decreasing the impedance values and raising the capacitances. Cell culture investigations of the different CNT coatings on platinum with NIH3T3 fibroblasts attest an overall good cytocompatibility of these coatings. For spiral ganglion neurons, this can also be observed but a desired positive effect of the CNTs on the neurons is absent. Furthermore, we found that the well-established DAPI staining assay does not function on the coatings prepared from single-wall nanotubes.
Asunto(s)
Electrodos , Nanotubos de Carbono/química , Platino (Metal)/química , Ganglio Espiral de la Cóclea/fisiología , Animales , Animales Recién Nacidos , Materiales Biocompatibles Revestidos/química , Proteínas Fluorescentes Verdes/metabolismo , Ensayo de Materiales , Ratones , Células 3T3 NIH , Neuronas/fisiología , Ratas , Ratas Sprague-Dawley , Reproducibilidad de los ResultadosRESUMEN
In order to quantify the relative bioavailability of glycidol from glycidyl fatty acid esters in vivo, glycidyl palmitoyl ester and glycidol were orally applied to rats in equimolar doses. The time courses of the amounts of glycidol binding to hemoglobin as well as the excretion of 2,3-dihydroxypropyl mercapturic acids were determined. The results indicate that glycidol is released from the glycidyl ester by hydrolysis and rapidly distributed in the organism. In relation to glycidol, there was only a small timely delay in the binding to hemoglobin for the glycidol moiety released from the ester which may be certainly attributed to enzymatic hydrolysis. In both cases, however, an analogous plateau was observed representing similar amounts of hemoglobin binding. With regard to the urinary excretion of mercapturic acids, also similar amounts of dihydroxypropyl mercapturic acids could be detected. In an ADME test using a virtual double tag (³H, ¹4C) of glycidyl palmitoyl ester, a diverging isotope distribution was detected. The kinetics of the ¹4C-activity reflected the kinetics of free glycidol released after hydrolysis of the palmitoyl ester. In view of this experimental data obtained in rats, it is at present justified for the purpose of risk assessment to assume complete hydrolysis of the glycidyl ester in the gastrointestinal tract. Therefore, assessment of human exposure to glycidyl fatty acid ester should be regarded as an exposure to the same molar quantity of glycidol.
Asunto(s)
Compuestos Epoxi/farmacocinética , Palmitatos/farmacocinética , Ácidos Palmíticos/farmacocinética , Propanoles/farmacocinética , Acetilcisteína/análogos & derivados , Acetilcisteína/orina , Administración Oral , Animales , Disponibilidad Biológica , Biomarcadores/sangre , Biomarcadores/metabolismo , Biomarcadores/orina , Biotransformación , Radioisótopos de Carbono , Compuestos Epoxi/administración & dosificación , Compuestos Epoxi/sangre , Compuestos Epoxi/metabolismo , Contaminación de Alimentos , Hemoglobinas/metabolismo , Hidrólisis , Masculino , Palmitatos/sangre , Ácidos Palmíticos/administración & dosificación , Ácidos Palmíticos/sangre , Ácidos Palmíticos/metabolismo , Propanoles/administración & dosificación , Propanoles/sangre , Propanoles/metabolismo , Ratas , Ratas Wistar , Distribución Tisular , Tritio , Valina/análogos & derivados , Valina/sangreRESUMEN
A new approach for the nondestructive reconstruction of stratified systems with constant elemental composition but with varying chemical compounds has been developed. The procedure is based on depth scans with a confocal X-ray fluorescence setup at certain energies near absorption edges. These so-called marker energies, where XAFS signals of the involved chemical compounds differ significantly, can also be used to uncover the chemical composition and its topology. A prominent field of application is homogeneous material that is degraded due to chemical reactions like oxidation or reduction. A procedure for the semiquantitative reconstruction of stratified material by means of depth scans at marker energies is elaborated and validated and a three-dimensional mapping is presented.
RESUMEN
Biodegradable magnesium-based alloys are very promising materials for temporary implants. However, the clinical use of magnesium-based alloys is often limited by rapid corrosion and by insufficient mechanical stability. Here we investigated RS66, a magnesium-based alloy with extraordinary physicochemical properties of high tensile strength combined with a high ductility and a homogeneous grain size of ~1 µm which was obtained by rapid solidification processing and reciprocal extrusion. Using a series of in vitro and in vivo experiments, we analyzed the biodegradation behavior and the biocompatibility of this alloy. In vitro, RS66 had no cytotoxic effects in physiological concentrations on the viability and the proliferation of primary human osteoblasts. In vivo, RS66 cylinders were implanted into femur condyles, under the skin and in the muscle of adult rabbits and were monitored for 1, 2, 3, 4 and 8 weeks. After explantation, the RS66 cylinders were first analyzed by microtomography to determine the remaining RS66 alloy and calculate the corrosion rates. Then, the implantation sites were examined histologically for healing processes and foreign body reactions. We found that RS66 was corroded fastest subcutaneously followed by intramuscular and bony implantation of the samples. No clinical harm with transient gas cavities during the first 6 weeks in subcutaneous and intramuscular implantation sites was observed. No gas cavities were formed around the implantation site in bone. The corrosion rates in the different anatomical locations correlated well with the local blood flow prior to implantation. A normal foreign body reaction occurred in all tissues. Interestingly, no enhanced bone formation could be observed around the corroding samples in the condyles. These data show that RS66 is biocompatible, and due to its interesting physicochemical properties, this magnesium alloy is a promising material for biodegradable implants.