RESUMEN
Magnetite nanoparticles (NPs) possess properties that make them suitable for a wide range of applications. In recent years, interest in the synthesis of magnetite NPs and their surface functionalization has increased significantly, especially regarding their application in biomedicine such as for controlled and targeted drug delivery. There are several conventional methods for preparing magnetite NPs, all of which mostly utilize Fe(iii) and Fe(ii) salt precursors. In this study, we present a microwave hydrothermal synthesis for the precipitation of magnetite NPs at temperatures of 200 °C for 20 min and 260 °C for 5 min, with only iron(iii) as a precursor utilizing chamomile flower extract as a stabilizing, capping, and reducing agent. Products were characterized using FTIR, PXRD, SEM, and magnetometry. Our analysis revealed significant differences in the properties of magnetite NPs prepared with this approach, and the conventional two-precursor hydrothermal microwave method (sample MagH). FTIR and PXRD analyses confirmed coated magnetite particles. The temperature and magnetic-field dependence of magnetization indicate their superparamagnetic behavior. Importantly, the results of our study show the noticeable cytotoxicity of coated magnetite NPs-toxic to carcinoma cells but harmless to healthy cells-further emphasizing the potential of these NPs for biomedical applications.
RESUMEN
The pressure-induced properties of hybrid organic-inorganic ferroelectrics (HOIFs) with tunable structures and selectable organic and inorganic components are important for device fabrication. However, given the structural complexity of polycrystalline HOIFs and the limited resolution of pressure data, resolving the structure-property puzzle has so far been the exception rather than the rule. With this in mind, we present a collection of in situ high-pressure data measured for triethylmethylammonium tetrabromoferrate(III), ([N(C2H5)3CH3][FeBr4]) (EMAFB) by unraveling its flexible physical and photophysical behavior up to 80 GPa. Pressure-driven X-ray diffraction and Raman spectroscopy disclose its soft and reversible structural distortion, creating room for delicate band gap modulation. During compression, orange turns dark red at â¼2 GPa, and further compression results in piezochromism, leading to opaque black, while decompressed EMAFB appears in an orange hue. Assuming that the mechanical softness of EMAFB is the basis for reversible piezochromic control, we present alternations in the electronic landscape leading to a 1.22 eV band narrowing at 20.3 GPa while maintaining the semiconducting character at 72 GPa. EMAFB exhibits an emission enhancement, manifested by an increase of photoluminescence up to 17.3 GPa, correlating with the onsets of structural distortion and amorphization. The stimuli-responsive behavior of EMAFB, exhibiting stress-activated modification of the electronic structure, can enrich the physical library of HOIFs suitable for pressure-sensing technologies.
RESUMEN
The formation of ZnO nanomaterials from different Zn acetylacetonate precursor solutions was studied in situ by employing simultaneous, time-resolved X-ray diffraction (XRD) and X-ray absorption spectroscopy (EXAFS) at the Zn K-edge. The precursor solutions were heated from room temperature to the desired reaction temperatures in a hermetically sealed cell dedicated to X-ray experiments. In general, the first indications for the formation of hexagonal ZnO were found for elevated temperatures of about 80 °C both by XRD and EXAFS, and the contributions increase with temperature and time. However, no reaction intermediates could be proved in addition to the Zn precursors and the formed hexagonal ZnO materials. Furthermore, the results show that the efficiency of the reaction, i.e., the conversion of the precursor material to the ZnO product, strongly depends on the solvent used and the reaction temperature. ZnO formation is accelerated by an increased temperature of 165 °C and the use of 1-octanol, with a conversion to ZnO of more than 80% after only a ca. 35 min reaction time according to a detailed analysis of the EXAFS data. For comparison, an identical concentration of Zn acetylacetonate in water or dilute alkaline NaOH solutions and a reaction temperature of around 90 °C leads to a smaller conversion of approximately 50% only, even after several hours of reaction. The particle size determined from XRD for different orientations shows a preferred orientation along the c-direction of the hexagonal crystal system, as well in accordance with scanning electron microscopy. The LaMer model explained this highly non-uniform growth of needle-like ZnO crystallites.
RESUMEN
The hydrothermal synthesis of zinc oxide (ZnO) particles from zinc acetylacetonate monohydrate in "pure" aqueous solution and in aqueous NaOH solution at 90 °C is reported. The structural and morphological properties of ZnO particles were investigated by powder X-ray diffraction, X-ray absorption spectroscopy (XAS), field emission scanning electron microscopy, and transmission electron microscopy. The effect of NaOH on the growth mechanism and photocatalytic performance of hierarchical ZnO structures was investigated. The experimental findings, supported by results of quantum chemical calculations at the level of density functional theory, were used to propose the mechanism of nucleation and preferential growth of finely tuned hollow and nonhollow ZnO structures and their effects on the photocatalytic activity. The calculations indicate that the process of ZnO nucleation in "pure" aqueous solution mainly proceeds by the reaction of small monomers, while tetramers play a crucial role in aqueous NaOH solution. Both the preferred ZnO nanostructure and microstructure growth processes are driven by O-H···O hydrogen bonds as controlling elements. The calculated values of the EO···H interaction indicate a stronger interaction via O-H···O hydrogen bonds in "pure" aqueous media (EO···H = -11.73 kcal mol-1) compared to those obtained in aqueous NaOH solution (EO···H = -8.41 kcal mol-1). The specific structural motif of the (ZnO-H2O)12 dodecamers with calculated negative ΔG*INT free release energy indicates that the formation of anisotropic nanocrystalline ZnO with the c-axis as the primary growth direction is spontaneous and accelerated exclusively in "pure" aqueous solution, whereas it is an unfavorable endergonic process in aqueous NaOH solution (ΔG*INT > 0). Efforts have been made to determine the photocatalytic efficiency of the ZnO samples based on the XAS measurements. ZnO particles obtained in "pure" aqueous solution show the highest photocatalytic activity due to the presence of a larger amount of oxygen vacancies.
RESUMEN
Pure and Co3+-doped BaAl2O4 [Ba(Al1-xCox)2O4, x = 0, 0.0077, 0.0379] powder samples were prepared by a facile hydrothermal route. Elemental analyses by static secondary ion mass spectrometry (SIMS), X-ray absorption spectroscopy (XAS) measurements at the Co K-edge, and X-ray diffraction studies were fully correlated, thus addressing a complete description of the structural complexity of Co3+-doped BaAl2O4 powder. Powder X-ray diffraction (PXRD) patterns indicated that prepared samples were nanocrystalline with a hexagonal P63 symmetry. The X-ray absorption near-edge structure (XANES) measurements revealed the presence of cobalt in a +3 oxidation state, while the rarely documented, tetrahedral symmetry around Co3+ was extracted from the extended X-ray absorption fine structure (EXAFS) oscillation patterns. Rietveld structure refinements showed that Co3+ preferentially substitutes Al3+ at tetrahedral Al3 sites of the BaAl2O4 host lattice, whereas the (Al3)O4 tetrahedra remain rather regular with Co3+-O distances ranging from 1.73(9) to 1.74(9) Å. The underlying magneto-structural features were unraveled through axial and rhombic zero-field splitting (ZFS) terms. The increased substitution of Al3+ by Co3+ at Al3 sites leads to an increase of the axial ZFS terms in Co3+-doped BaAl2O4 powder from 10.8 to 26.3 K, whereas the rhombic ZFS parameters across the series change in the range from 2.7 to 10.4 K, showing a considerable increase of anisotropy together with the values of the anisotropic g-tensor components flowing from 1.7 to 2.5. We defined the line between the Co3+ doping limit and influenced magneto-structural characteristics, thus enabling the design of strategy to control the ZFS terms' contributions to magnetic anisotropy within Co3+-doped BaAl2O4 powder.
RESUMEN
The solid-state ion-selective electrodes presented here are based on the FePO4:Ag2S:polytetrafluoroethylene (PTFE) = 1:1:2 with an addition of (0.25-1)% microwave-synthesized hematite (α-Fe2O3), magnetite (Fe3O4), boehmite [γ-AlO(OH)], and alumina (Al2O3) nanoparticles (NPs) in order to establish ideal membrane composition for iron(III) cations determination. Synthesized NPs are characterized with Fourier-Transform Infrared (FTIR) spectroscopy, Powder X-Ray Diffraction (PXRD), and Scanning Electron Microscopy (SEM) with Energy Dispersive Spectroscopy (EDS). The iron oxides NPs, more specifically, magnetite and hematite, showed a more positive effect on the sensing properties than boehmite and alumina NPs. The hematite NPs had the most significant effect on the linear range for the determination of ferric cations. The membrane containing 0.25% hematite NPs showed a slope of -19.75 mV per decade in the linear range from 1.2â10-6 to 10-2 mol L-1, with a correlation factor of 0.9925. The recoveries for the determination of ferric cations in standard solutions were 99.4, 106.7, 93.6, and 101.1% for different concentrations.
RESUMEN
A molecule-based ferroelectric triethylmethylammonium tetrachloroferrate(III) ([N(C2H5)3CH3][FeCl4]) powder was designed as a multifunctional material exhibiting excellent multiple bistability. Prepared by the slow evaporation method at room temperature, the compound crystallizes in the non-centrosymmetric assembly of hexagonal symmetry (P63mc space group) which undergoes a reversible temperature-triggered phase transition pinpointed at 363 K to the centrosymmetric packing within the P63/mmc space group. Aside from the inseparable role of the symmetry-breaking process smoothly unveiled from the X-ray powder diffraction data, a striking change in the dielectric permittivity observed during the paraelectric-to-ferroelectric phase transition directly discloses the bistable dielectric behavior-an exceptionally high increase in the dielectric permittivity of about 360% at 100 kHz across the heating and cooling cycles is direct proof showing the highly desirable stimuli-responsive electric ordering in this improper ferroelectric architecture. Due to the magnetically modulated physical properties resulting in the coupling of magnetic and electric orderings, the flexible assembly of [N(C2H5)3CH3][FeCl4] could be used to boost the design and development of novel magnetoelectric devices.
RESUMEN
Inorganic materials that enable a link between the storage and release of molecular oxygen offer a fertile ground in continuous quest for the applications that can potentially reduce energy consumption and thus minimize adverse effects on the environment. Herein, we address reversible intake/release of an oxygen within the BaAl2O4 material as evidenced by unexpected magnetic ordering. Magnetic measurements unveil that an oxygen is stored in the form of condensed matter, creating a kind of low dimensional, chain-like assembly within the tunnels of BaAl2O4 structure. We demonstrate that oxygen is adsorbed simply by staying in air, at ambient conditions, and released relatively quickly by staying in the He or other gas atmosphere of several millibars pressure even at 300 K.
RESUMEN
Powder samples of pure BaAl2O4 and doped with 4.9 atom % Eu in relation to Ba were prepared by a hydrothermal route. The samples were characterized by X-ray diffraction, 151Eu Mössbauer spectroscopy, synchrotron-based X-ray absorption spectroscopy at the Ba L3- and Eu L3-edges, and photoluminescence measurements. Diffraction lines were broadened, indicating that the samples were nanocrystallline. The samples possessed a hexagonal crystal structure, space group P63. 151Eu Mössbauer spectroscopy revealed the presence of Eu in the 3+ oxidation state. The same information on the Eu oxidation state was also obtained by the Eu L3-edge X-ray absorption near-edge structure of the doped sample. Extended X-ray absorption fine structure showed an Eu3+ ion substituted for Ba2+ on the Ba2 site in the BaAl2O4 host structure, with charge compensation by an interstitial O in the vicinity of the Ba2 site. That was confirmed by a Rietveld structure refinement for the Eu-doped BaAl2O4 sample. Analysis of the diffraction line broadening for the prepared samples was performed simultaneously with the structure refinement. Both the dopant Eu3+ and the interstitial O acted as defects in the host BaAl2O4 lattice, which increased the lattice strain from 0.02% for pure BaAl2O4 to 0.17% for the Eu-doped sample. Crystallite sizes in the samples increased with Eu doping from 32 nm for pure BaAl2O4 to 36 nm for Eu-doped BaAl2O4. This could likely be related to the increase in the diffusion rate of the cations in the sample when a part of the Ba2+ cation content was exchanged with smaller Eu3+ cations. The Eu-doped BaAl2O4 sample exhibited red photoluminescence under excitation with λexc = 308 nm. The observed emission spectrum indicated that Eu3+ ions occupied the Ba site with lower symmetry in the doped sample.
RESUMEN
The sizes of CoMn2O4 nanoparticles can easily be tuned, from 40 to 8 nm, depending on the temperature of decomposition of the single-source molecular precursor {[Co(bpy)3][Mn2(C2O4)3]·H2O}n. The structural features of the CoMn2O4 spinel are also affected by the heat treatment temperature, showing a pronounced expansion of unit cell parameters as a consequence of thermally induced cation redistribution between tetrahedral and octahedral sites. Moreover, the magnetic behavior of CoMn2O4 was successfully tailored as well; depending on the heat treatment, it is possible to switch between the superparamagnetic and ferrimagnetic ordering and to tailor the magnetic transition temperatures, i.e., the boundaries between the hard and soft magnetic behavior.
RESUMEN
Powder BaAl2O4 samples doped with 0 and 1.76 atom % Cr in relation to Al were hydrothermally prepared. Both samples were characterized by X-ray diffraction and synchrotron based X-ray absorption spectroscopy at the Cr K- and the Ba L3-edge. Diffraction patterns indicated that samples were nanocrystalline with a hexagonal crystal structure, space group P63. Chromium doping of barium aluminate caused an increase of the unit-cell volume and diffraction line broadening. The doped sample contained a small amount of an impurity phase, namely, BaCrO4. Analyzed Cr K-edge X-ray absorption near edge structure for the doped sample showed the presence of chromium in 6+ and 3+ oxidation states: Cr(6+) was characteristic for chromium in the impurity phase BaCrO4, while Cr(3+) participated in the formation of the doped phase BaAl2O4:Cr. Extended X-ray absorption fine structure suggested an unusual tetrahedral coordination of Cr(3+) ions within the BaAl2O4 host phase. The structure of samples was refined by the Rietveld method, simultaneously with the analysis of diffraction line broadening. Rietveld structure refinement showed that in doping the Cr(3+) ions likely substituted for Al(3+) ions on Al1 tetrahedral sites of barium aluminate crystal lattice. Crystallite sizes in the samples decreased with chromium doping, from 32 nm for pure BaAl2O4 to 24 nm for Cr-doped BaAl2O4. The dopant Cr(3+) cations acted as defects in the barium aluminate structure that increased lattice strain from 0.02% for pure BaAl2O4 to 0.14% for doped BaAl2O4 and disturbed the crystallites to grow.