Length matters: Functional flip of the short TatA transmembrane helix.

The twin arginine translocase (Tat) exports folded proteins across bacterial membranes. The putative pore-forming or membrane-weakening component (TatAd in B. subtilis) is anchored to the lipid bilayer via an unusually short transmembrane α-helix (TMH), with less than 16 residues. Its tilt angle in different membranes was analyzed under hydrophobic mismatch conditions, using synchrotron radiation circular dichroism and solid-state NMR. Positive mismatch (introduced either by reconstitution in short-chain lipids or by extending the hydrophobic TMH length) increased the helix tilt of the TMH as expected. Negative mismatch (introduced either by reconstitution in long-chain lipids or by shortening the TMH), on the other hand, led to protein aggregation. These data suggest that the TMH of TatA is just about long enough for stable membrane insertion. At the same time, its short length is a crucial factor for successful translocation, as demonstrated here in native membrane vesicles using an in vitro translocation assay. Furthermore, when reconstituted in model membranes with negative spontaneous curvature, the TMH was found to be aligned parallel to the membrane surface. This intrinsic ability of TatA to flip out of the membrane core thus seems to play a key role in its membrane-destabilizing effect during Tat-dependent translocation.

Structural and functional characterization of the pore-forming domain of pinholin S2168.

Pinholin S2168 triggers the lytic cycle of bacteriophage φ21 in infected Escherichia coli Activated transmembrane dimers oligomerize into small holes and uncouple the proton gradient. Transmembrane domain 1 (TMD1) regulates this activity, while TMD2 is postulated to form the actual "pinholes." Focusing on the TMD2 fragment, we used synchrotron radiation-based circular dichroism to confirm its α-helical conformation and transmembrane alignment. Solid-state 15N-NMR in oriented DMPC bilayers yielded a helix tilt angle of τ = 14°, a high order parameter (Smol = 0.9), and revealed the azimuthal angle. The resulting rotational orientation places an extended glycine zipper motif (G40xxxS44xxxG48) together with a patch of H-bonding residues (T51, T54, N55) sideways along TMD2, available for helix-helix interactions. Using fluorescence vesicle leakage assays, we demonstrate that TMD2 forms stable holes with an estimated diameter of 2 nm, as long as the glycine zipper motif remains intact. Based on our experimental data, we suggest structural models for the oligomeric pinhole (right-handed heptameric TMD2 bundle), for the active dimer (right-handed Gly-zipped TMD2/TMD2 dimer), and for the full-length pinholin protein before being triggered (Gly-zipped TMD2/TMD1-TMD1/TMD2 dimer in a line).

The transient production of anti-TNF-α antibody Adalimumab and a comparison of its characterization to the biosimilar Cinorra.

Recombinant antibodies have emerged over the last few decades as the fastest growing class of therapeutic proteins for autoimmune diseases. Post-translation modifications of antibodies produced by human cell lines are highly consistent with those existing in natural human proteins and this is a major advantage of utilizing these cell lines. Cinorra is a biosimilar form of the antibody Adalimumab, which is an antagonist of TNF-α used for the treatment of autoimmune diseases. Adalimumab and Cinorra were produced by stable expression from CHO cells. The aim of this study was to select HEK cells as a host for producing Adalimumab to reveal whether the antibody produced by this human-derived cell line has similar characterization to Cinorra. Adalimumab was transiently produced in HEK-293T cells, characterized and analyzed for its properties. Circular dichroism spectroscopy confirmed a strong structural similarity of the expressed antibody with Cinorra. Likewise its binding activity and kinetic affinity to TNF-α (EC50 = 416.5 ng/ml, KD = 3.89 E-10 M,) were highly similar to that of Cinorra (EC50 = 421.2 ng/ml and KD = 3.34 E-10 M,). Additionally there was near identical neutralization of TNF-α-mediated cellular cytotoxicity (IC50 of the expressed = 4.93 nM; IC50 of Cinorra = 4.5 nM). Results indicate that Adalimumab produced by HEK-293T cells possesses a similarly efficient function and biological activity to Cinorra. Consequently, human-derived host cells with human post-translational modifications might potentially provide a basis for the development of Adalimumab with pharmaceutical properties for research and therapeutic use.

Transmembrane helix assembly and the role of salt bridges.

Transmembrane helix-helix interactions mediate the folding and assembly of membrane proteins. Recognition motifs range from GxxxG and leucine zippers to polar side chains and salt bridges. Some canonical membrane proteins contain local charge clusters that are important for folding and function, and which have to be compatible with a stable insertion into the bilayer via the translocon. Recently, the electrostatic "charge zipper" has been described as another kind of assembly motif. The protein sequences exhibit a quasi-symmetrical pattern of complementary charges that can form extended ladders of salt bridges. Such segments can insert reversibly into membranes, or even translocate across them. Nature uses charge zippers in transport processes, and they can also be adapted in the design of cell-penetrating carriers.

Folding and self-assembly of the TatA translocation pore based on a charge zipper mechanism.

We propose a concept for the folding and self-assembly of the pore-forming TatA complex from the Twin-arginine translocase and of other membrane proteins based on electrostatic "charge zippers." Each subunit of TatA consists of a transmembrane segment, an amphiphilic helix (APH), and a C-terminal densely charged region (DCR). The sequence of charges in the DCR is complementary to the charge pattern on the APH, suggesting that the protein can be "zipped up" by a ladder of seven salt bridges. The length of the resulting hairpin matches the lipid bilayer thickness, hence a transmembrane pore could self-assemble via intra- and intermolecular salt bridges. The steric feasibility was rationalized by molecular dynamics simulations, and experimental evidence was obtained by monitoring the monomer-oligomer equilibrium of specific charge mutants. Similar "charge zippers" are proposed for other membrane-associated proteins, e.g., the biofilm-inducing peptide TisB, the human antimicrobial peptide dermcidin, and the pestiviral E(RNS) protein.

Magnetically oriented dodecylphosphocholine bicelles for solid-state NMR structure analysis.

A mixture of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) with the short-chain detergent n-dodecylphosphocholine (DPC) is introduced here as a new membrane-mimetic bicelle system for solid-state NMR structure analysis of membrane proteins in oriented samples. Magnetically aligned DMPC/DPC bicelles are stable over a range of concentrations, with an optimum lipid ratio of q=3:1, and they can be flipped with lanthanide ions. The advantage of DMPC/DPC over established bicelle systems lies in the possibility to use one and the same detergent for purification and NMR analysis of the membrane protein, without any need for detergent exchange. Furthermore, the same batch of protein can be studied in both micelles and bicelles, using liquid-state and solid-state NMR, respectively. The applicability of the DMPC/DPC bicelles is demonstrated here with the (15)N-labeled transmembrane protein TatA.

Membrane alignment of the pore-forming component TatA(d) of the twin-arginine translocase from Bacillus subtilis resolved by solid-state NMR spectroscopy.

The twin-arginine translocase (Tat) provides protein export in bacteria and plant chloroplasts and is capable of transporting fully folded proteins across the membrane. We resolved the conformation and membrane alignment of the pore-forming subunit TatA(d) from Bacillus subtilis using solid-state NMR spectroscopy. The relevant structured part of the protein, TatA(2-45), contains a transmembrane segment (TMS) and an amphiphilic helix (APH). It was reconstituted in planar bicelles, which represent the lipid environment of a bacterial membrane. The SAMMY solid-state NMR experiment was used to correlate (15)N chemical shifts and (1)H-(15)N dipolar couplings in the backbone and side chains of the (15)N-labeled protein. The observed wheel-like patterns ("PISA wheels") in the resulting 2-dimensional spectra confirm the α-helical character of the two segments and reveal their alignment in the lipid bilayer. Helix tilt angles (τ(TMS) = 13°, τ(APH) = 64°) were obtained from uniformly labeled protein, and azimuthal rotations (ρ(Val15) = 235°, ρ(Ile29) = 25°) were obtained from selective labels. These constraints define two distinct families of allowed structures for TatA in the membrane-bound state. The manifold of solutions could be narrowed down to a unique structure by using input from a liquid-state NMR study of TatA in detergent micelles, as recently described [Hu, Y.; Zhao, E.; Li, H.; Xia, B.; Jin, C. J. Am. Chem. Soc. 2010, DOI: 10.1021/ja1053785]. Interestingly, the APH showed an unexpectedly slanted alignment in the protein, different from that of the isolated APH peptide. This finding implies that the amphiphilic region of TatA is not just a flexible attachment to the transmembrane anchor but might be able to form intra- or even intermolecular salt-bridges, which could play a key role in pore assembly.

Structure analysis of the membrane protein TatC(d) from the Tat system of B. subtilis by circular dichroism.

The twin arginine translocation (Tat) system can transport fully folded proteins, including their cofactors, across bacterial and thylakoid membranes. The Tat system of Bacillus subtilis that serves to export the phosphodiesterase (PhoD) consists of only two membrane proteins, TatA(d) and TatC(d). The larger component TatC(d) has a molecular weight of 28 kDa and several membrane-spanning segments. This protein has been expressed in Escherichia coli and purified in sufficient amounts for structure analysis by circular dichroism (CD) and NMR spectroscopy. TatC(d) was reconstituted in detergent micelles and in lipid bilayers for CD analysis in solution and in macroscopically oriented samples, to examine the stability of the protein. Suitable protocols and model membrane systems have been established, by which TatC(d) maintains the level of helicity close to theoretically predicted, and its transmembrane alignment could been verified.

Structural characterization of the pore forming protein TatAd of the twin-arginine translocase in membranes by solid-state 15N-NMR.

The transmembrane protein TatA is the pore forming unit of the twin-arginine translocase (Tat), which has the unique ability of transporting folded proteins across the cell membrane. This ATP-independent protein export pathway is a recently discovered alternative to the general secretory (Sec) system of bacteria. To obtain insight in the translocation mechanism, the structure and alignment in the membrane of the well-folded segments 2-45 of TatAd from Bacillus subtilis was studied here. Using solid-state NMR in bicelles containing anionic lipids, the topology and orientation of TatAd was determined in an environment mimicking the bacterial membrane. A wheel-like pattern, characteristic for a tilted transmembrane helix, was observed in 15N chemical shift /15N-1H dipolar coupling correlation NMR spectra. Analysis of this PISA wheel revealed a 14-16 residue long N-terminal membrane-spanning helix which is tilted by 17 degrees with respect to the membrane normal. In addition, comparison of uniformly and selectively 15N-labeled TatA2-45 samples allowed determination of the helix polarity angle.

Structure analysis of the protein translocating channel TatA in membranes using a multi-construct approach.

The twin-arginine-translocase (Tat) can transport proteins in their folded state across bacterial or thylakoid membranes. In Bacillus subtilis the Tat-machinery consists of only two integral (inner) membrane proteins, TatA and TatC. Multiple copies of TatA are supposed to form the transmembrane channel, but little structural data is available on this 70-residue component. We used a multi-construct approach for expressing several characteristic fragments of TatA(d), to determine their individual structures and to cross-validate them comprehensively within the architecture of the full-length protein. Here, we report the design, high-yield expression, detergent-aided purification and lipid-reconstitution of five constructs of TatA(d), overcoming difficulties associated with the very different hydrophobicities and sizes of these membrane protein fragments. Circular dichroism (CD) and oriented CD (OCD) were used to determine their respective conformations and alignments in suitable, negatively charged phospholipid bilayers. CD spectroscopy showed an N-terminal alpha-helix, a central helical stretch, and an unstructured C-terminus, thus proving the existence of these secondary structures in TatA(d) for the first time. The OCD spectra demonstrated a transmembrane orientation of the N-terminal alpha-helix and a surface alignment of the central amphiphilic helix in lipid bilayers, thus supporting the postulated topology model and function of TatA as a transmembrane channel.