Biomechanical comparison of a new undercut thread design vs. the V-shape thread design for pedicle screws.

BACKGROUND CONTEXT: Thread shape is regarded as an important factor influencing the fixation strength and osseointegration of bone screws. However, commercial pedicle screws with a V-shaped thread are prone to generating stress concentration at the bone-screw interface, thereby increasing the risk of screw loosening. Thus, modification of the pedicle-screw thread is imperative. PURPOSE: This study aimed to investigate the fixation stability of pedicle screws with the new undercut thread design in comparison to pedicle screws with a V-shaped thread. STUDY DESIGN: In vitro cadaveric biomechanical test and finite element analysis (FEA). METHODS: Pedicle screws with the undercut thread (characterized by a flat crest feature and a tip-facing undercut feature) were custom-manufactured, whereas those with the V-shaped thread were procured from a commercial supplier. Fixation stability was assessed by the cyclic nonpullout compressive biomechanical testing on cadaveric female osteoporotic vertebrae. The vertical displacement and rotation angle of the 2 types of pedicle screws were calculated every 100 cycles to evaluate their resistance to migration and rotation. FEA was conducted to investigate the stress distribution and bone damage at the bone-screw interface for both types of pedicle screws. RESULTS: Biomechanical testing revealed that the pedicle screws with the undercut thread exhibited significantly lower vertical displacement and rotation angles than the pedicle screws with the V-shape thread (P < 0.05). FEA results demonstrated a more uniform stress distribution in the bone surrounding the thread in the undercut design than in the V-shape design. Additionally, bone damage resulting from the pedicle screw was lower in the undercut design than in the V-shape design. CONCLUSIONS: Pedicle screws with an undercut thread are less prone to migration and rotation and thus more stable in the bone than those with a V-shape thread. CLINICAL SIGNIFICANCE: The undercut thread design may reduce the incidence of pedicle-screw loosening.

Development and characterization of a bacterial enzyme cascade reaction system for efficient and stable PET degradation.

The widespread use of polyethylene terephthalate (PET) in various industries has led to a surge in microplastics (MPs) pollution, posing a significant threat to ecosystems and human health. To address this, we have developed a bacterial enzyme cascade reaction system (BECRS) that focuses on the efficient degradation of PET. This system harnesses the Escherichia coli (E. coli) surface to display CsgA protein, which forms curli fibers, along with the carbohydrate-binding module 3 (CBM3) and PETases, to enhance the adsorption and degradation of PET. The study demonstrated that the BECRS achieved a notable PET film degradation rate of 3437 ± 148 µg/(d*cm²), with a degradation efficiency of 21.40% for crystalline PET MPs, and the degradation products were all converted to TPA. The stability of the system was evidenced by retaining over 80% of its original activity after multiple uses and during one month of storage. Molecular dynamics simulations confirmed that the presence of CsgA did not interfere with the enzymatic activity of PETases. This BECRS represents a significant step forward in the biodegradation of PET, particularly microplastics, offering a practical and sustainable solution for environmental pollution control.

TRIM47 silencing inhibits the malignant biological behaviors of prostate cancer cells by regulating MDM2/p53 signaling.

Prostate cancer (PCa) is a prevalent male malignancy globally. Tripartite motif 47 (TRIM47) has been reported to be associated with PCa. However, how TRIM47 acts on PCa is still incompletely understood. Here, we explored the biological roles of TRIM47 in PCa cells and investigated its potential regulatory mechanism. TRIM47 expression in PCa cells was detected by qRT-PCR and western blot. After TRIM47 silencing, the viability of PCa cells was measured using CCK-8 method. Flow cytometry was employed to estimate cell cycle. Cell apoptotic level was subjected to appraisement with TUNEL assay. Additionally, wound healing- and transwell assays were adopted for evaluation of migration and invasion of PCa cells. Moreover, the Biogrid database and HDOCK SERVER predicated that TRIM47 could interact with mouse double minute 2 (MDM2), which was detected using the Co-immunoprecipitation (co-IP) assay and glutathione S-transferase (GST) pull-down assay. The expression of proteins in MDM2/p53 signaling was detected by western blot analysis. Results indicated that TRIM47 expression was highly expressed in PCa cells. TRIM47 knockdown inhibited PCa proliferation and cell cycle whereas promoted cell apoptosis. Besides, TRIM47 knockdown significantly inhibited the migration and invasion of PCa cells. In addition, TRIM47 was proved to bind to MDM2 and regulated MDM2/p53 expression. Importantly, MDM2 overexpression counteracted the impacts of TRIM47 knockdown on cell viability, cell cycle, apoptosis, migration and invasion by regulating the MDM2/p53 pathway. Collectively, our results suggested that TRIM47 silencing inhibits the malignant biological behaviors of prostate cancer cells by regulating MDM2/p53 signaling, which may provide a novel therapeutic target for PCa treatment.

Research on prediction of coal water medium separation effect based on multi-models.

To improve the separation efficiency of raw coal and ensure clean use, the accurate calculation of the partition coefficients (PCs) in coal water medium sorting is required. Single models have been used to predict the partition coefficient (PC) for decades, but their accuracy remains constrained. This study proposes a multi-model (MM) calculation method based on the Gompertz model (GM), the Logistic model (LM), the Arctangent model (AM), and the Approximate formula (AFM) to improve the accuracy of the predicted coal water medium sorting PCs. Four groups of coal samples and two specific cases were used to verify the accuracy of the MM calculation method. The PCs of the MM method had a minimal Ef (0.91-8.84), a maximal R2 (0.9648-0.9994), a maximal F-value (199.17-11352.31), and the highest significance of all the models. The MM method was found to be the most suitable of all the models for predicting any coal water medium separation process. Further, when calculating the PC for cleaned coal ash, the separation density of MM is closer to the actual separation density than that of either the GM, LM, AM, or AFM models. The MM method, therefore, produces more accurate results compared to a single model. MM is expected to predict the PC based on the required cleaned coal ash, and then regulate the sorting density to improve the production efficiency.

Controllable Fabrication of Sub-10 nm Graphene Nanopores via Helium Ion Microscopy and DNA Detection.

Solid-state nanopores have become a prominent tool in the field of single-molecule detection. Conventional solid-state nanopores are thick, which affects the spatial resolution of the detection results. Graphene is the thinnest 2D material and has the highest spatial detection resolution. In this study, a graphene membrane chip was fabricated by combining a MEMS process with a 2D material wet transfer process. Raman spectroscopy was used to assess the quality of graphene after the transfer. The mechanism behind the influence of the processing dose and residence time of the helium ion beam on the processed pore size was investigated. Subsequently, graphene nanopores with diameters less than 10 nm were fabricated via helium ion microscopy. DNA was detected using a 5.8 nm graphene nanopore chip, and the appearance of double-peak signals on the surface of 20 mer DNA was successfully detected. These results serve as a valuable reference for nanopore fabrication using 2D material for DNA analysis.

Investigating the Mechanism of Diethylenetriamine Pentamethylene Phosphonic Acid as a Depressant for Calcite Flotation of Fluorite.

Fluorite and calcite have been attracting research attention for a long time. This paper reports on an investigation of the use of diethylene triamine pentamethylphosphonic acid (DTPMPA) as a chelating inhibitor. DTPMPA was used as a chelating inhibitor to study the flotation, separation, and adsorption behaviors of fluorite and calcite minerals. The microflotation experiment showed that the maximum separation of fluorite and calcite can be achieved with a DTPMPA dosage of 1.5 × 10-4 mol/L under weakly alkaline conditions (pH = 8). Zeta potential measurement, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy were used to confirm that DTPMPA was adsorbed on the surface of calcite, inhibiting NaOl adsorption. Additionally, density functional theory calculations showed that oxygen in the DTPMPA phosphate group formed the most stable bidentate binuclear adsorption configuration by chelating with calcium on the calcite surface. Through detection analysis and simulation calculations, the results showed that DTPMPA exhibited significantly weaker adsorption on fluorite compared to that on calcite, highlighting its selective inhibition ability on calcite.

Three-dimensional comprehensive evaluation of unilateral alveolar cleft bone grafting with iliac bone and chin bone blocks.

In this study, we aimed to provide guidance for selecting bone grafting materials in cases of alveolar clefts. Twenty-nine patients with unilateral complete alveolar clefts were categorized into three groups based on the bone grafting material used: Group A (iliac bone block grafts), Group B (iliac cancellous bone grafts), and Group C (chin bone block grafts). Cone-beam computed tomography (CBCT) data were analyzed using Mimics 19.0 software. Results showed that Group A had the highest bone formation rate, with significant differences observed between Groups A and B, as well as between Groups B and C. Group A and Group C had the highest proportion of Type I in volume assessment, while Group B had the highest proportion of Type III, Significant differences were observed in the distribution of volume assessment scores among the three groups. Bone height measurement results indicated that buccal-side measurement points had a higher proportion of Type I bone height than palatal-side measurement points. Bone width measurement results showed that Type I bone width was highest in Group C, while Type IV bone width was highest in Group B. Significant differences were observed in the distribution of implanted bone width among the three groups. Total grafting scores indicated that Types A and D were predominant in Groups A and C, while Group B had the highest proportion of Type D. Significant differences were observed in the distribution of total grafting scores among the three groups. The comprehensive evaluation method provides accurate assessment of alveolar cleft bone grafting outcomes and is applicable in clinical settings. Based on the results, we consider both iliac bone blocks and chin bone blocks as suitable materials for alveolar cleft bone grafting. Grafting material selection should consider preoperative gap volume measured using CBCT, required bone quantity, donor site complications, and overall clinical needs.

Chemical Structure Characteristics and Model Construction of Coal with Three Kinds of Coalification Degrees.

The coal structure is extensively used for studying the properties of coal, and the construction of accurate and reliable coal structure models can promote these researches. In this study, Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD) were used to analyze the changes in the coal structure as a function of the coalification degree, and a semiquantitative model construction method based on FTIR, XRD, and X-ray photoelectron spectroscopy (XPS) analyses was proposed. With an increase in the coalification degree, the size of the aromatic cores in the coal increased. During the conversion from lignite to bituminous coal, the content of aliphatic structures increased, while the content of oxygen-containing functional groups (OFGs) significantly decreased. Conversely, during the conversion from bituminous coal to anthracite, the content of aliphatic structures decreased while the content of OFGs slightly increased. The calculated FTIR spectra of the coal structure models were consistent with the experimental FTIR spectra, which confirmed the accuracy of the models. Furthermore, the models successfully explained the microscopic mechanism underlying the differences in the wettability of the coal samples with varying coalification degrees. The construction method and coal structure models in this study will be more widely applied in future research.

Mechanical properties and tissue damage caused by staples in gastrointestinal anastomosis.

Gastrointestinal surgery using a stapler is usually associated with tissue damage, anastomosis leakage, bleeding, and other complications, which is one of the effective methods for treating digestive tract cancer. The cutting properties of staples and the tissue damage occurring in the process of stapling porcine esophageal and gastric tissues have been evaluated and a new type of stapler has been designed. Since different structural and mechanical properties esophageal and gastric tissues layers, the puncturing force exhibits a fluctuating trend. Compressive stress caused by the bending of the staple legs can lead to the destruction of the vascular network inside the tissue, tissue deforms and tears. Finally, a staple with an internal incision arc (IIA) tip is designed, which meeting the performance requirements.

Effect of longitudinal-bending elliptical ultrasonic vibration assistance on electrosurgical cutting and hemostasis.

Electrosurgical devices are widely used for tissue cutting and hemostasis in minimally invasive surgery (MIS) for their high precision and low trauma. However, tissue adhesion and the resulting thermal injury can cause infection and impede the wound-healing process. This paper proposes a longitudinal-bending elliptical ultrasonic vibration-assisted (EUV-A) electrosurgical cutting system that incorporates an ultrasonic vibration in the direction of the cut by introducing an elliptical motion of the surgical tip. Compared with a solely longitudinal ultrasonic vibration-assisted (UV-A) electrosurgical device, the EUV-A electrode contacts the tissue intermittently, thus allowing for a cooler cut and preventing tissue accumulation. The experimental results reveal that the EUV-A electrode demonstrates better performance than the UV-A electrode for both anti-adhesion and thermal injury through in vitro experiments in porcine samples. The tissue removal mechanism of EUV-A electrosurgical cutting is modeled to investigate its anti-adhesion effect. In addition, lower adhesion, lower temperature, and faster cutting are demonstrated through in vivo experiments in rabbit samples. Results show that the EUV-A electrode causes lower thermal injury, indicative of faster postoperative healing. Finally, efficacy of the hemostatic effect of the EUV-A electrode is demonstrated in vivo for vessels up to 3.5 mm (equivalent to that of electrocautery). The study reveals that the EUV-A electrosurgical cutting system can achieve safe tissue incision and hemostasis.

Disruption of hedgehog signaling leads to hyoid bone dysplasia during embryogenesis.

The development of the hyoid bone is a complex process that involves the coordination of multiple signaling pathways. Previous studies have demonstrated that disruption of the hedgehog pathway in mice results in a series of structural malformations. However, the specific role and critical period of the hedgehog pathway in the early development of the hyoid bone have not been thoroughly characterized. In this study, we treated pregnant ICR mice with the hedgehog pathway inhibitor vismodegib by oral gavage in order to establish a model of hyoid bone dysplasia. Our results indicate that administration of vismodegib at embryonic days 11.5 (E11.5) and E12.5 resulted in the development of hyoid bone dysplasia. We were able to define the critical periods for the induction of hyoid bone deformity through the use of a meticulous temporal resolution. Our findings suggest that the hedgehog pathway plays a crucial role in the early development of the hyoid bone. Additionally, our research has established a novel and easily established mouse model of synostosis in the hyoid bone using a commercially available pathway-selective inhibitor.

A Comparative Evaluation of Iliac Crest Cortical-Cancellous Bone Blocks Graft With and Without Concentrated Growth Factors (CGFs) in Secondary Alveolar Bone Grafting: A Retrospective Study.

BACKGROUND: The purpose of this study was to investigate the clinical effect and bone resorption of iliac crest cortical-cancellous bone block grafts combined with concentrated growth factor (CGF) compared with iliac crest cortical-cancellous bone block grafts only in secondary alveolar bone grafting. MATERIALS AND METHODS: Eighty-six patients (43 in the CGF group and 43 in the non-CGF group) with unilateral alveolar clefts were examined. Patients (17 in the CGF group and 17 in the non-CGF group) were randomly chosen for radiologic evaluation. Quantitative evaluation of the bone resorption rate was made with cone-beam computed tomography and Mimics 19.0 software at 1 week and 12 months after surgery. RESULTS: The success rate of bone grafting was 95.3% and 79.1% in the CGF and non-CGF groups, respectively ( P =0.025). The mean bone resorption rate at 12 months postoperatively was 35.66±15.80% and 41.39±19.57% in the CGF and non-CGF groups, respectively ( P =0.355). The bone resorption patterns of the 2 groups were similar on the labial, alveolar process, and palatal sides, and there was no obvious bone resorption on the labial side in either group. Nasal side bone resorption in the CGF group was significantly less than that in the non-CGF group ( P =0.047). CONCLUSIONS: Cortical-cancellous bone block grafts reduce labial bone resorption, while CGF reduces nasal bone resorption and improves the success rate. The combination of bone block and CGF in secondary alveolar bone grafting is worthy of further clinical application.

One-pot biosynthesis of N-acetylneuraminic acid from chitin via combination of chitin-degrading enzymes, N-acetylglucosamine-2-epimerase, and N-neuraminic acid aldolase.

N-acetylneuraminic acid (Neu5Ac) possesses the ability to promote mental health and enhance immunity and is widely used in both medicine and food fields as a supplement. Enzymatic production of Neu5Ac using N-acetyl-D-glucosamine (GlcNAc) as substrate was significant. However, the high-cost GlcNAc limited its development. In this study, an in vitro multi-enzyme catalysis was built to produce Neu5Ac using affordable chitin as substrate. Firstly, exochitinase SmChiA from Serratia proteamaculans and N-acetylglucosaminosidase CmNAGase from Chitinolyticbacter meiyuanensis SYBC-H1 were screened and combined to produce GlcNAc, effectively. Then, the chitinase was cascaded with N-acetylglucosamine-2-epimerase (AGE) and N-neuraminic acid aldolase (NanA) to produce Neu5Ac; the optimal conditions of the multi-enzyme catalysis system were 37°C and pH 8.5, the ratio of AGE to NanA (1:4) and addition of pyruvate (70 mM), respectively. Finally, 9.2 g/L Neu5Ac could be obtained from 20 g/L chitin within 24 h along with two supplementations with pyruvate. This work will lay a good foundation for the production of Neu5Ac from cheap chitin resources.

Novel Microneedle Patch-Based Surface-Enhanced Raman Spectroscopy Sensor for the Detection of Pesticide Residues.

Pesticide residues are a global threat to human health, and conventional sensors fail to simultaneously detect pesticide residues on the surface and inside agricultural products. In this work, we present a new microneedle (MN) patch-based surface-enhanced Raman spectroscopy (SERS) sensor. The needles and the basement of MNs can simultaneously detect pesticide residues on the surface and inside agricultural products. The Ag nanoparticles and sodium hyaluronate/poly(vinyl alcohol) (HA/PVA) hydrogel used in this MN patch-based sensor efficiently amplify the Raman signals of the pesticide residues. In addition, the HA/PVA hydrogel can effectively and quickly collect the residues, allowing this sensor to detect pesticide residues more conveniently. Furthermore, the stepped structure of the MNs increases the sensor's surface area. Experimental results show that the sensor can detect thiram and thiabendazole (TBZ) pesticide residues with detection limits of 10-7 and 10-8 M, respectively. The detection process is minimally invasive and not harmful to agricultural products. The application of this MN patch-based SERS sensor can be extended to the safety and health monitoring of other plants and animals.

LINC00664/miR-411-5p/KLF9 feedback loop contributes to the human oral squamous cell carcinoma progression.

OBJECTIVES: Oral squamous cell carcinoma (OSCC) is one of the most aggressive head and neck cancers with high incidence. Multiple studies have revealed that long non-coding RNAs (lncRNAs) play pivotal roles in tumorigenesis. However, the role of long intergenic non-protein coding RNA 664 (LINC00664) on the progression of OSCC was still unclear. SUBJECTS AND METHODS: In this study, the expression of LINC00664 in OSCC tissues and cell lines was detected by quantitative real-time polymerase chain reaction (qRT-PCR). The functional role of LINC0664 was estimated by cell counting kit-8 (CCK-8), transwell assays, Western blot in vitro, and xenograft tumor model in vivo. The regulatory mechanism was investigated by RNA-binding protein immunoprecipitation (RIP), chromatin immunoprecipitation (ChIP), and luciferase reporter assays. RESULTS: LINC00664 was found to be upregulated in OSCC tissues and cell lines and was associated with poor prognosis of OSCC patients. LINC00664 knockdown suppressed OSCC cell proliferation, migration, invasion, and epithelial-mesenchymal transition (EMT). Moreover, Kruppel like factor 9 (KLF9) enhanced LINC00664 expression at transcription level. Interestingly, LINC00664 upregulated KLF9 expression by sponging miR-411-5p. In addition, knockdown of LINC00664 restrained tumor growth of OSCC in vivo. CONCLUSION: Our study identified the oncogenic roles of LINC00664 in OSCC tumorigenesis and EMT via KLF9/LINC00664/miR-411-5p/KLF9 feedback loop, which provides new perspectives of the potential therapeutic target for OSCC.

Material removal and surface damage in high-speed grinding of enamel.

Although high-speed grinding of the enamel surface is often required in restorative dentistry, the knowledge of grinding mechanics, material removal, and fracture damage mechanism related to this process is still relatively limited; therefore, it is important to perform relevant scientific and theoretical research. As per the occlusal surface and the buccal/lingual surface of the teeth, the experimental scheme of high-speed grinding of the enamel surface using a diamond grinding bur was designed, and the grinding force, force ratio, grinding temperature, chips, surface morphology, surface damage, and other important characteristics were tested and analyzed. Furthermore, the grinding geometry model, grinding mechanics, material fracture, and removal mechanism associated with the high-speed grinding of an enamel surface were considered. The results show that the grinding force, friction coefficient, grinding temperature, and surface damage achieved through buccal/lingual surface grinding are considerably greater, and the grinding quality is worse than that obtained via occlusal surface grinding under the same grinding conditions. With the increase in the feed rate, grinding force, friction coefficient, grinding temperature, and surface damage obviously increase, and the surface quality decreases. The embrittlement effect and the ironing mechanism are present during the process of high-speed grinding of enamel. Regardless of the feed rate, the three types of material fracture modes of the buccal/lingual surface are more serious than those of the occlusal surface (making it more likely to produce unstable large chips or tearing chips); moreover, the brittle fracture and damage of the final machined surface are more obvious. The cutting mechanics and cutting mechanism identified in this study will provide scientific guidance for dental grinding operations.

Understanding the structure and cutting mechanism of shaver blades: A case study on articular cartilage.

Mechanical shaver blades have been used in minimally invasive knee arthroscopy surgery for nearly 50 years, however, the tooth structure and cutting mechanism of shaver blades were less reported. This paper designed several shaver blades (triangular tooth/TT, circular tooth/CT and convex arc tooth/CAT), defined the cutting edges and angles of the original shaver (OS) and proposed a newly designed shaver (NDS) with a positive secondary rake angle to optimize cutting performance. The cutting process and theoretical model of the OS and NDS were analysed from 2D and 3D perspectives. A comparative experimental analysis of cutting performance, including cutting force, surface roughness, and groove geometries, was carried out to verify the influence of tooth structures and secondary rake angle. The results showed that the tooth of the OS has three different cutting edges, among which the secondary cutting edge sited at the tube section contributes to the puncturing process, and the primary cutting edge located on the outer wall of the tube participates in the oblique cutting process and finally removes the soft tissue. The cutting process of the secondary cutting edge of NDS has been changed from puncturing to oblique cutting, therefore, only the oblique cutting exists throughout the shaving process. This makes the shape and quantity of the chips of OS and NDS different, which has been verified by experiment. The cutting performance of CT was superior to that of TT and CAT, highlighting the importance of tooth roots in the cutting process. Positive secondary rake angle significantly improved the cutting performance of CAT, but not that of TT with a small profile angle (30°) and CT, which means both the puncturing and oblique cutting play important roles. Not all the positive secondary rake angle was helpful to the cutting process and 30° and 45° were suggested.

Property and Function of a Novel Chitinase Containing Dual Catalytic Domains Capable of Converting Chitin Into N-Acetyl-D-Glucosamine.

A novel multifunctional chitinase (CmChi3)-encoding gene was cloned from Chitinolyticbacter meiyuanensis and actively expressed in Escherichia coli. Sequence analysis showed that CmChi3 contains two glycoside hydrolase family 18 (GH18) catalytic domains and exhibited low identity with well-characterized chitinases. The optimum pH and temperature of purified recombinant CmChi3 were 6.0 and 50°C, respectively. CmChi3 exhibited strict substrate specificity of 4.1 U/mg toward colloidal chitin (CC) and hydrolyzed it to yield N-acetyl-D-glucosamine (GlcNAc) as the sole end product. An analysis of the hydrolysis products toward N-acetyl chitooligosaccharides (N-acetyl COSs) and CC substrates revealed that CmChi3 exhibits endochitinase, N-acetyl-ß-d-glucosaminidase (NAGase), and transglycosylase (TGase) activities. Further studies revealed that the N-terminal catalytic domain of CmChi3 exhibited endo-acting and NAGase activities, while the C-terminal catalytic domain showed exo-acting and TGase activities. The hydrolytic properties and favorable environmental adaptations indicate that CmChi3 holds potential for commercial GlcNAc production from chitin.

Structure-Element Surface Modification Strategy Enhances the Antibacterial Performance of Zr-BMGs.

Zirconium-based metallic glasses (Zr-BMGs) have attracted tremendous attention in healthcare fields, especially in the design of surgical tools and orthopedic implants, due to their unique amorphous structure; however, the application of Zr-BMG-based medical devices is hindered by bacterial contamination. Here, a structure-element strategy is proposed to improve the antibacterial performance of Zr-BMGs by surface laser nanostructuring and silver nanoparticle (AgNP) deposition. The laser nanostructuring process generates a disordered nanoparticle structure (NP) and laser-induced periodic surface structure (LIPSS) to decrease the surface bacterial adhesion and increase the internal antimicrobial ion release. Moreover, after Ag deposition and hydrogen peroxide (H2O2) treatment, the antibacterial adhesion ability of the Zr-BMG surface can be further improved without any influence on the crystallization of Zr-BMGs and the release of antibacterial copper/nickel (Cu/Ni). The antibacterial effect of the LIPSS and the NP surfaces presents over 90% bacterial killing ratio, which is superior to that of the naked Zr-BMGs with less than 60% bacterial killing ratio. In vitro and in vivo tests show that the Ag-deposited and H2O2-treated LIPSS surfaces exhibit an optimal balance between the antibacterial property and the biocompatibility compared with the polished, NP structured or LIPSS structured surfaces. It is assumed that such structure-element surface modification strategy can improve the antibacterial activity of metal-containing surgical tools and orthopedic implants, improving the success rate of medical treatment.

Antibacterial Performance of Zr-BMG, Stainless Steel, and Titanium Alloy with Laser-Induced Periodic Surface Structures.

A laser-induced periodic surface structure (LIPSS) was shown to have antibacterial adhesion properties in previous research. In this study, the antibacterial performance of LIPSS on traditional biometals (stainless steel and titanium alloy) and a potential biometal (zirconium-based bulk metallic glass, Zr-BMG) was investigated. A femtosecond laser was used to fabricate LIPSS on the specimens. Gram-negative Escherichia coli (E. coli) and Gram-positive Staphylococcus aureus (S. aureus) were used to examine the antibacterial behavior of the LIPSS samples. The bacterial adhesion force on each specimen was evaluated by an atomic force microscopy (AFM) cell probe. The results showed that the LIPSS on all three metal surfaces significantly lowered antibacterial adhesion compared to polished metal specimens. E. coli demonstrated a higher adhesion force but a lower surface adhesion rate compared to S. aureus. The Zr-BMG specimen with LIPSS has multiple antimicrobial mechanisms (physical antiadhesion and chemical elimination), while the traditional biometals (316L and TC4) mainly offer physical antiadhesion. Finally, an in vitro/vivo study showed that specimens with LIPSS surfaces did not significantly affect the biocompatibility of the specimens. This study reveals that the Zr-BMG specimen with femtosecond laser-processed LIPSS is an ideal choice for achieving an antibacterial surface.