Design and enhanced anticorrosion performance of a Zn5Mo2O11·5H2O/h-BN nanocomposite with labyrinth of nanopores.

Zinc molybdate (ZMO) is a safe and effective grafting material for anticorrosion. Herein, we reported the synthesis of ZMO/h-BN with the labyrinth of capillary pores owing to the in situ growth of ZMO on flake hexagonal boron nitride (h-BN) using the hydrothermal method. The special morphological structure provided a tortuous path for aggressive species to the steel substrate, which extended and blocked the transmission of aggressive species, enhancing the physical corrosion barrier performance. In addition, the capillary pores of ZMO contributed to the competitive adsorption of Cl- in an electrolyte and reduced the diffusion of aggressive species, thus further delaying the corrosion process. Moreover, the capture of oxygen by forming a B-O bond with h-BN and the formation of a molybdate passive film are beneficial for the inhibition of cathodic and anodic reactions. As verified by electrochemical impedance spectroscopy (EIS), the anticorrosion performance of ZMO/h-BN coating increased by 49.58% and 130.72% compared with ZMO and epoxy resin (EP) coatings after immersing in a NaCl aqueous solution (3.50 wt%) for 72 h. This coating matrix provides an avenue for molybdate-based corrosion remediation.

Monolayer Colloidal Crystals by Modified Air-Water Interface Self-Assembly Approach.

Hexagonally ordered arrays of polystyrene (PS) microspheres were prepared by a modified air-water self-assembly method. A detailed analysis of the air-water interface self-assembly process was conducted. Several parameters affect the quality of the monolayer colloidal crystals, i.e., the colloidal microsphere concentration on the latex, the surfactant concentration, the polystyrene microsphere diameter, the microsphere polydispersity, and the degree of sphericity of polystyrene microspheres. An abrupt change in surface tension was used to improve the quality of the monolayer colloidal crystal. Three typical microstructures, i.e., a cone, a pillar, and a binary structure were prepared by reactive-ion etching using a high-quality colloidal crystal mask. This study provides insight into the production of microsphere templates with flexible structures for large-area patterned materials.

Enhanced photoelectric properties by the coordinating role of doping and modification.

Dual technique design in this research has successfully enriched the complementation between doping and surface modification. Here, Co(2+) doped Ag-ZnO nanocomposites (CAZ NCs) are mass produced by the combustion method. The HRTEM image shows that the doped Co(2+) and the surface modified Ag nanoparticles on the ZnO NCs are influential on the preferential orientation. Based on the conductivity formula σ = nqµ and the actual verification, the improved photoelectric properties of CAZ NCs under visible light irradiation are attributed to the enhanced light absorption and the weakened recombination of photogenerated electron-hole pairs. It would be instructive for the sound design concept of subsequent material development.

Enhanced phosphorus recovery and biofilm microbial community changes in an alternating anaerobic/aerobic biofilter.

The operation of an alternating anaerobic/aerobic biofilter (AABF), treating synthetic wastewater, was modified to enhance recovery of phosphorus (P). The AABF was periodically fed with an additional carbon source during the anaerobic phase to force the release of biofilm-sequestered P which was then harvested and recovered. A maximum of 48% of the total influent P was found to be released in the solution for recovery. Upon implementation of periodic P bio-sequestering and P harvesting, the predominant bacterial communities changed from ß-Proteobacteria to γ-Proteobacteria groups. The genus Pseudomonas of γ-Proteobacteria was found to enrich greatly with 98% dominance. Dense intracellular poly-P granules were found within the cells of the biofilm, confirming the presence of P accumulating organisms (PAOs). Periodic addition of a carbon source to the AABF coupled with intracellular P reduction during the anaerobic phase most probably exerted environmental stress in the selection of Pseudomonas PAOs over PAOs of other phylogenic types. Results of the study provided operational information on the selection of certain microbial communities for P removal and recovery. This information can be used to further advance P recovery in biofilm systems such as the AABFs.

Trimester- and method-specific reference intervals for thyroid tests in pregnant Chinese women: methodology, euthyroid definition and iodine status can influence the setting of reference intervals.

OBJECTIVE: The importance of diagnosis and treatment of thyroid dysfunction during pregnancy has been widely recognized. We therefore established trimester- and method-specific reference intervals for thyroid testing in pregnant women according to the NACB recommended criteria. Several factors can affect the setting of reference intervals, in particular manufacturer's methodology, euthyroid definition and iodine status. DESIGN: Cross-sectional dataset analysis. SUBJECTS: Five hundred and five normal pregnant women at different stages of gestation were rigorously selected for setting reference intervals. All were healthy, iodine sufficient, euthyroid and negative for both serum thyroid peroxidase antibody (TPOAb) and thyroglobulin antibody (TgAb). MEASUREMENTS: Thyrotrophin (TSH), total and free thyroxine (TT4 and FT4), total and free triiodothyronine (TT3 and FT3) and anti-TPOAb and anti-TgAb were measured using the Bayer ADVIA Centaur system. Iodine content in drinking water, salt and urine was determined by national standard methods. The 2·5th and 97·5th percentiles were calculated as the reference intervals for thyroid hormone levels during each trimester. RESULTS: All participants had long-term consumption of iodized salt and median urinary iodine of 150-200 µg/l during each three trimester. The reference intervals for the first, second and third trimesters were, respectively, TSH 0·03-4·51, 0·05-4·50 and 0·47-4·54 mIU/l and FT4 11·8-21·0, 10·6-17·6 and 9·2-16·7 pmol/l. The manufacturer's method, euthyroid definition and iodine status may influence TSH and FT4 reference intervals. Alterations in thyroid hormone concentrations during pregnancy differed at different stage of gestation and to those of a nonpregnant state. CONCLUSIONS: The trimester- and method-based reference intervals for thyroid tests during pregnancy are clinically appropriate. Some variables should be controlled when establishing reference intervals.