Coal-based carbon nanosheets contained carbon microfibers modified with grown carbon nanotubes as efficient air electrode material for rechargeable zinc-air batteries.

Coal-based oxygen electrocatalysts hold immense promise for cost-effective applications in rechargeable Zn-air batteries (ZABs) and the value-added, clean utilization of traditional coal resources. Herein, an electrospun membrane electrode comprising coal-derived carbon nanosheets and directly grown carbon nanotubes (CNS/CMF@CNT) was successfully synthesized. The hierarchical porous structure of the electrode, composed of multiple components, significantly facilitates mass and ion transportation, resulting in exceptional electrochemical performance. Employing Fe as the catalyst for CNT growth, the CNS/CMF@CNT electrode exhibits a remarkable onset potential of 0.96 V and a half-wave potential of 0.87 V in the oxygen reduction reaction (ORR). In-situ surface-enhanced Raman spectroscopy reveals that hydroxyl radical desorption on the surface of CNS/CMF@CNT(Fe) is the rate-determining step of the ORR. Notably, the aqueous ZAB featuring the CNS/CMF@CNT(Fe) electrode achieved a peak power density of 216.0 mW cm-2 at a current density of 414 mA cm-2 and maintained a voltage efficiency of 65.1 % after 2000 charge/discharge cycles at 5 mA cm-2. Furthermore, the all-solid-state ZAB incorporating this electrode displayed an open-circuit voltage of 1.43 V, a peak power density of 70.1 mW cm-2 at a current density of 110 mA cm-2, and a voltage efficiency of 66.5 % after 150 charge/discharge cycles. The utilization of abundant coal as the raw material for electrode fabrication not only brings conceivable economic benefits in ZAB construction, but also commendably advances the effective application of traditional coal resources in a more sustainable manner.

An advanced high-rate capability sodium-ion anode: Few-layered NbSe2 with a mechanism of parallel running intercalation and conversion.

The unique superconductivity and charge density wave transition characteristics of NbSe2 make it worthy of exploring its electrochemical performance and potential applications in the field of batteries. Herein, the bulk NbSe2 was successfully exfoliated into few-layered NbSe2 nanostructures by wet grinding exfoliation approach, which solved the issues of its long activation period and poor cycle stability. The strong Nb-Se bond in the plane and weak van der Waals force between the adjacent layers could render the fast Na+ diffusion, provide abundant reaction sites and multi-directional migration paths, thus accelerate the ionic conductivity. The theoretical calculations verified the high Na+ adsorption tendency between the NbSe2 interlayers stemming from the continuous region of charge accumulation. Thanks to the unique electronic and two-dimensional few-layered structures, the exfoliated NbSe2 exhibited a high cyclic stability with a capacity of 502 mA h g-1 over 2800 cycles at 10 A/g. In addition, the reaction mechanism was studied by in-situ X-ray diffraction and other tests, indicating a reaction mechanism containing of simultaneous intercalation (NbSe2↔NaxNbSe2↔NaNbSe2↔Na1+xNbSe2) and conversion processes in NbSe2. This parallelly running mechanism not only alleviates the volume change but also ensures a high specific capacity. Additionally, different lattice planes of the NaNbSe2 intermediate in the intercalation process experience varying degrees of contraction and expanding in d-spacing due to the influence of Coulombic force.

Soluble starch-derived porous carbon microspheres with interconnected and hierarchical structure by a low dosage KOH activation for ultrahigh rate supercapacitors.

The developed porous structure and high density are essential to enhance the bulk performance of carbon-based supercapacitors. Nevertheless, it remains a significant challenge to optimize the balance between the porous structure and the density of carbon materials to realize superior gravimetric and areal electrochemical performance. The soluble starch-derived interconnected hierarchical porous carbon microspheres were prepared through a simple hydrothermal treatment succeeded by chemical activation with a low dosage of KOH. Due to the formation of interconnected spherical morphology, hierarchical porous structure, reasonable mesopore volume (0.33 cm3 g-1) and specific surface area (1162 m2 g-1), the prepared carbon microsphere has an ultrahigh capacitance of 394 F g-1 @ 1 A g-1 and a high capacitance retention of 62.7 % @ 80 A g-1. The assembled two-electrode device displays good cycle stability after 20,000 cycles and an ultra-high energy density of 11.6 Wh kg-1 @ 250 W kg-1. Moreover, the sample still exhibits a specific capacitance of 165 F g-1 @ 1 A g-1 at a high mass loading of 10 mg cm-2, resulting in a high areal capacitance of 1.65 F cm-2. The strategy proposed in this study, via a low-dose KOH activation process, provides the way for the synthesis of high-performance porous carbon materials.

COVID-19 in immunocompromised patients after hematopoietic stem cell transplantation: a pilot study.

Data on severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection in patients at early stage of immune reconstitution after hematopoietic stem cell transplantation (HSCT) are limited. In the present study, we retrospectively investigated the incidence and clinical features of SARS-CoV-2 infection in patients who underwent HSCT in 2022. Patients (allo-HSCT, n = 80; auto-HSCT, n = 37) were consecutively included in the study. The SARS-CoV-2 infection rate was 59.8%, and the median interval of HSCT to coronavirus disease 2019 (COVID-19) was 4.8 (range: 0.5-12) months. Most patients were categorized as mild (41.4%) or moderate (38.6%), and 20% as severe/critical. No deaths were attributable to COVID-19. Further analysis showed that lower circulating CD8+ T-cell counts and calcineurin inhibitor administration increased the risk of SARS-CoV-2 infection. Exposure to rituximab significantly increased the probability of severe or critical COVID-19 compared with that of mild/moderate illness (P < .001). In the multivariate analysis, rituximab use was associated with severe COVID-19. Additionally, COVID-19 had no significant effect on immune reconstitution. Furthermore, it was found that Epstein-Barr virus infection and rituximab administration possibly increase the risk of developing severe illness. Our study provides preliminary insights into the effect of SARS-CoV-2 on immune reconstitution and the outcomes of allo-HSCT recipients.

Early T-cell reconstitution predicts risk of EBV reactivation after allogeneic hematopoietic stem cell transplantation.

The quality of immune reconstitution (IR) is crucial for the outcome of patients who received allogeneic hematopoietic stem cell transplantation (allo-HSCT), and is closely connected with infection, relapse and graft-versus-host disease (GvHD) which are the most important causes for transplantation failure. However, the IR pattern in the early stage after allo-HSCT, particularly haploidentical (HID) HSCT, remains unclear. In this retrospective study, we examined the T cell reconstitution of patients within the initial 30 days (n = 173) and 100 days (n = 122) after allo-HSCT with myeloablative condition (MAC), of which > 70% were HID HSCT, to assess the influence of IR on the transplant outcomes. By comparing 78 patients with good IR (GIR) to 44 patients with poor IR (PIR), we observed that GIR was associated with lower risk for Epstein-Barr virus (EBV) reactivation and cytomegalovirus (CMV) reactivation, but had no significant impacts on the survival outcomes (i.e., overall survival, event-free survival) and cumulative incidences of GvHD. Importantly, we found lymphocyte reconstitution pattern at day 30 after allo-HSCT would be a surrogate for IR evaluated at day 100. In the Cox proportional hazard model, early reconstitution of CD4+, CD4+CD25+, CD4+CD45RO+, CD4+CD25+CD27low, and CD8+ T cells at day 30 was reversely correlated with risk of EBV reactivation. Finally, we constructed a predictive model for EBV reactivation with CD8+ and CD4+CD45RO+ T cell proportions of the training cohort (n = 102), which was validated with a validation cohort (n = 37). In summary, our study found that the quality of IR at day 30 had a predictive value for the risk of EBV reactivation, and might provide guidance for close monitoring for EBV reactivation.

Crystallization-induced formation of two-dimensional carbon nanosheets derived from sodium lignosulfonate for fast lithium storage.

Sodium lignosulfonate, an abundant natural resource, is regarded as an ideal precursor for the synthesis of hard carbon. The development of high-performance, low-cost and sustainable anode materials is a significant challenge facing lithium-ion batteries (LIBs). The modulation of morphology and defect structure during thermal transformation is crucial to improve Li+ storage behavior. Synthesized using sodium lignosulfonate as a precursor, two-dimensional carbon nanosheets with a high density of defects were produced. The synergistic influence of ice templates and KCl was leveraged, where the ice prevented clumping of potassium chloride during drying, and the latter served as a skeletal support during pyrolysis. This resulted in the formation of an interconnected two-dimensional nanosheet structure through the combined action of both templates. The optimized sample has a charging capacity of 712.4 mA h g-1 at 0.1 A g-1, which is contributed by the slope region. After 200 cycles at 0.2 A g-1, the specific charge capacity remains 514.4 mA h g-1, and a high specific charge capacity of 333.8 mA h g-1 after 800 cycles at 2 A g-1. The proposed investigation offers a promising approach for developing high-performance, low-cost carbon-based anode materials that could be used in advanced lithium-ion batteries.

Discovery of PRDM16-Mediated TRPA1 Induction as the Mechanism for Low Tubulo-Interstitial Fibrosis in Diabetic Kidney Disease.

The pathogenesis of Diabetic kidney disease(DKD) involves pathological changes in both tubulo-interstitium and the glomerulus. Surprisingly, tubulo-interstitial fibrosis (TIF), does not develop significantly until the late stage of DKD. Here, it is demonstrated that PR domain-containing 16 (PRDM16) is a key to the low level of TIF in DKD. In the experiments, PRDM16 is upregulated in high glucose-treated renal tubular cells, DKD mouse kidneys, and renal biopsy of human DKD patients via activation of NF-κB signal pathway. High glucose-induced expression of fibrotic proteins in renal tubular cells is suppressed by PRDM16. Mechanistically, PRDM16 bound to the promotor region of Transient receptor potential ankyrin 1 (TRPA1) to transactivate its expression and then suppressed MAPK (P38, ERK1/2) activation and downstream expression of TGF-ß1. Knockout of PRDM16 from kidney proximal tubules in mice blocked TRPA1 expression and enhanced MAPK activation, TGF-ß1 production, TIF development, and DKD progression, whereas knock-in of PRDM16 has opposite effects. In addition, overexpression of PRDM16 or its induction by formononetin ameliorated renal dysfunction and fibrosis in db/db diabetic mice. Finally, the above finding are detected in renal biopsies of DKD patients. Together, these results unveil PRDM16/TRPA1 as the mechanism responsible for the low level of TIF in the early stage of DKD by suppressing and TGF-ß1 expression.

Synergy Between Surface Confinement and Heterointerfacial Regulations with Fast Electron/Ion Migration in InSe-PPy for Sodium-Ion Storage.

Layered indium selenide (InSe) is a new 2D semiconductor material with high carrier mobility, widely adjustable bandgap, and high ductility. However, its ion storage behavior and related electrochemical reaction mechanism are rarely reported. In this study, InSe nanoflakes encapsulated in conductive polypyrrole (InSe@PPy) are designed in consideration of restraining the severe volume change in the electrochemical reaction and increasing conductivity via in situ chemical oxidation polymerization. Density functional theory calculations demonstrate that the construction of heterostructure can generate an internal electric field to accelerate electron transfer via additional driving forces, offering synergistically enhanced structural stability, electrical conductivity, and Na+ diffusion process. The resulting InSe@PPy composite shows outstanding electrochemical performance in the sodium ion batteries system, achieving a high reversible capacity of 336.4 mA h g-1 after 500 cycles at 1 A g-1 and a long-term cyclic stability with capacity of 274.4 mA h g-1 after 2800 cycles at 5 A g-1 . In particular, the investigation of capacity fluctuation within the first cycling reveals the alternating significance of intercalation and conversion reactions and evanescent alloying reaction. The combined reaction mechanism of insertion, conversion, and alloying of InSe@PPy is revealed by in situ X-ray diffraction, ex situ electrochemical impedance spectroscopy, and transmission electron microscopy.

Br-Doped BiOCl Nanosheet Exposed (001) Facet: Surface Oxygen Vacancy and Directed Electron Flow Boosting the Photocatalytic Performance.

The defective BiOCl nanosheet exposed (001) facet with favorable photocatalytic performance was designed. The surface microstructure analysis and theoretical calculation certified the dominant exposed (001) facet and rich surface oxygen defects of Br--doped BiOCl (B-6) nanosheets. The energy level structure analysis indicates that the band gap can be narrowed and the light absorption range can be widened by introducing Br- to BiOCl, and the presence of defective energy levels increases the photogenerated carrier transfer efficiency. Moreover, the doping of Br- in BiOCl promotes the directional flow of electrons to the surface of B-6, which improves the photocatalytic performance of the sample. Thus, the Br--doped BiOCl can degrade 96.5% RhB within 6 min under visible-light irradiation with high apparent reaction rate constants of 0.51 min-1, exhibiting the strongest photocatalytic degradation performance. This work provides guidance for the preparation of Bi-based photocatalysts with excellent performance.

Diagnostic efficiency of metagenomic next-generation sequencing for suspected infection in allogeneic hematopoietic stem cell transplantation recipients.

Introduction: Immunosuppression predisposes allogeneic hematopoietic stem cell transplantation (allo-HSCT) recipients to infection. Prompt and accurate identification of pathogens is crucial to optimize treatment strategies. This multi-center retrospective study aimed to assess the ability of metagenomic next-generation sequencing (mNGS) to detect causative pathogens in febrile allo-HSCT recipients and examined its concordance with conventional microbiological tests (CMT). Methods: We performed mNGS and CMT on samples obtained from 153 patients with suspected infection during allo-HSCT. Patients were grouped based on their neutropenic status at the time of sampling. Results: The mNGS test was more sensitive than CMT (81.1% vs. 53.6%, P<0.001) for diagnosing clinically suspected infection, especially in the non-neutropenia cohort. mNGS could detect fungi and viruses better than bacteria, with a higher sensitivity than CMT. Immune events were diagnosed in 57.4% (35/61) of the febrile events with negative mNGS results, and 33.5% (48/143) with negative CMT results (P=0.002). The treatment success rate of the targeted anti-infection strategy was significantly higher when based on mNGS than on empirical antibiotics (85% vs. 56.5%, P=0.004). Conclusion: The mNGS test is superior to CMT for identifying clinically relevant pathogens, and provides valuable information for anti-infection strategies in allo-HSCT recipients. Additionally, attention should be paid to immune events in patients with negative mNGS results.

Synergistic Effects between Lignin, Cellulose and Coal in the Co-Pyrolysis Process of Coal and Cotton Stalk.

In this work, Qiqunahu (QQH) coal, cotton stalk, cellulose and lignin extracted from cotton stalk were selected as raw materials to study the effects of the co-pyrolysis of coal and cotton stalk. Online thermogravimetric mass spectrometry (TG-MS) was used to analyse mass loss and gas release characteristics during co-pyrolysis. The results reveal that the mixture of cotton stalk and coal can significantly enhance the reactivity of the blends and promote the formation of effective gas. The cellulose in the cotton stalk promotes the generation of H2 and CO2 during the co-pyrolysis of coal and cotton stalks. Lignin promotes the production of CH4 and CO2. Cellulose and lignin show an inhibitory effect on the precipitation of small molecular weight hydrocarbon gases during co-pyrolysis. This study provides a better understanding for the co-pyrolysis of biomass and coal.

Research Progress and Hot Spot Analysis of the Propagation and Evolution Law of Prefabricated Cracks in Defective Rocks.

The generation of rock mass disasters in underground engineering essentially arises from the disruption of the original three-dimensional stress equilibrium of the rock mass caused by excavation and other activities, leading to the redistribution of stress fields. During the excavation process, the engineering rock mass undergoes complex dynamic stress equilibrium processes involving loading and unloading. This equilibrium process promotes the nucleation, initiation, and propagation of pre-existing cracks in the surrounding rock, resulting in changes in the internal structure of the rock mass and a weakening of its strength. Eventually, this localized cracking extends to global failure. In order to understand the current status better and study the development trends in the study of crack propagation and evolution in defective rock, this study conducts a bibliometric analysis of 288 articles from the Web of Science Core Collection database using CiteSpace software (version 6.1.R4). The results indicate an increasing trend in the annual publication output, characterized by two phases of emergence and rapid development. The countries of China, the United States, and Iran have the highest publication output in this field. The most frequently cited journals include INT J ROCK MECH MIN, ENG FRACT MECH, and ROCK MECH ROCK ENG. This study provides a comprehensive analysis of the current status and development trends in the research on the propagation and evolution of pre-existing cracks. This study enhances the comprehension of crucial aspects of crack propagation and evolution in rock materials with defects. Moreover, it opens up new possibilities for future investigations and holds promising implications for researchers and practitioners in the field.

Improvement of Luminescence Properties of Eulytite Single-Phase White Emitting Ca3Bi (PO4)3: Ce3+/Dy3+ Phosphor.

To reduce the issue of tri-primary color reabsorption, a new approach for single-phase phosphors as light-emitting diodes (LEDs) has been recommended. The structures, morphology, photoluminescence, thermal stability, and luminescence mechanism of a variety of Ca3Bi (PO4)3 (CBPO): Ce3+/Dy3+ phosphors were investigated. XRD characterization showed that all CBPO samples were eulytite structures. Furthermore, the energy transfer process from Ce3+ to Dy3+ in CBPO is systematically investigated in this work, and the color of light can be adjusted by changing the ratio of doped ions. Under UV light, energy is transferred from Ce3+-Dy3+ mainly through quadrupole-quadrupole interactions in the CBPO host, and doping with different Dy3+ concentrations tunes the emission color from blue to white. The thermal stability of the CBPO: 0.04Ce3+, 0.08Dy3+ samples is outstanding, and the CIE coordinates of the samples after emission have little effect with temperature, while their emission intensity at 423 K is as strong as that at room temperature, reaching 90%. The above results indicate that this CBPO material has great potential as a white light phosphor under near-UV excitation at the optimized concentration of Ce3+ and Dy3+.

Dual-Salt-Induced Hierarchical Porous Structure in a Carbon Sheet for High Performance Supercapacitors.

Porous carbon, one of the characteristic materials for electrochemical energy storage devices, has been paid wide-ranging attention. However, balancing the reconcilable mesopore volume with a large specific surface area (SSA) was still a challenge. Herein, a dual-salt-induced activation strategy was developed to obtain a porous carbon sheet with ultrahigh SSA (3082 m2 g-1), desirable mesopore volume (0.66 cm3 g-1), nanosheet morphology, and high surface O (7.87%) and S (4.0%) content. Hence, as a supercapacitor electrode, the optimal sample possessed a high specific capacitance (351 F g-1 at 1 A g-1) and excellent rate performance (holding capacitance up to 72.2% at 50 A g-1). Furthermore, the assembled zinc-ion hybrid supercapacitor also exhibited superior reversible capacity (142.7 mAh g-1 at 0.2 A g-1) and highly stable cycling (71.2 mAh g-1 at 5 A g-1 after 10,000 cycles with retention of 98.9%). This work was delivered a new possibility for the development of coal resources for the preparation of high performance porous carbon materials.

De novo myelodysplastic syndrome in a Rothmund-Thomson Syndrome patient with novel pathogenic RECQL4 variants.

Rothmund-Thomson syndrome (RTS) is a rare autosomal-recessive disorder with clinical features consisting of rash, poikiloderma, sparse hair, short stature, juvenile cataracts, skeletal abnormalities, and cancer predisposition. Genetic studies involving detection of pathogenic RECQL4 variants provide the diagnostic certitude. Osteosarcoma was found in two-thirds RECQL4-mutated RTS patients, while hematological malignancies were rarely reported. The variant diversity of RECQL4 gene has not been fully identified and mutations associated with hematologic malignancies are not well described. In this study, we presented a pedigree of RTS from a Chinese family, among which the proband was diagnosed with de novo myelodysplastic syndrome (MDS). Comprehensive medical examination and chromosome karyotyping were performed on the proband. Whole exome sequencing (WES) was performed on the proband, his sister and his mother. The familial cosegregation of sequence variants derived from WES was conducted by polymerase chain reaction-based Sanger sequencing. Structures of candidate RECQL4 mutants were done by in silico analysis to assess pathogenicity. Three novel RECQL4 germline variants, including c.T274C, c.G3014A, and c.G801C, were identified by WES and validated by Sanger sequencing. Prediction of conformation indicated that the structural stability of human RECQL4 protein was largely affected with these variants. The co-occurring U2AF1 p.S34F and TP53 p.Y220C mutations might contribute to the development of MDS. Our study expands the mutational spectrum of RECQL4 and provides underlying molecular mechanism for the development of MDS in RTS patients.

Nitrogen-Doped Hierarchical Porous Carbon Derived from Coal for High-Performance Supercapacitor.

The surface properties and the hierarchical pore structure of carbon materials are important for their actual application in supercapacitors. It is important to pursue an integrated approach that is both easy and cost-effective but also challenging. Herein, coal-based hierarchical porous carbon with nitrogen doping was prepared by a simple dual template strategy using coal as the carbon precursor. The hierarchical pores were controlled by incorporating different target templates. Thanks to high conductivity, large electrochemically active surface area (483 m2 g-1), hierarchical porousness with appropriate micro-/mesoporous channels, and high surface nitrogen content (5.34%), the resulting porous carbon exhibits a high specific capacitance in a three-electrode system using KOH electrolytes, reaching 302 F g-1 at 1 A g-1 and 230 F g-1 at 50 A g-1 with a retention rate of 76%. At 250 W kg-1, the symmetrical supercapacitor assembled at 6 M KOH shows a high energy density of 8.3 Wh kg-1, and the stability of the cycling is smooth. The energy density of the symmetric supercapacitor assembled under ionic liquids was further increased to 48.3 Wh kg-1 with a power output of 750 W kg-1 when the operating voltage was increased to 3 V. This work expands the application of coal-based carbon materials in capacitive energy storage.

Constructing the quinonyl groups and structural defects in carbon for supercapacitor and capacitive deionization applications.

The structural defects and oxygen-containing functional groups of carbon materials as electrode materials for supercapacitors or capacitive deionization devices are critical to their electrochemical performance. The tuning of surface oxygen-containing functional groups and carbon defects during pyrolysis is key to achieve a high performance in ion storage. Herein, quinonyl-dominant defective porous carbon is prepared by a pyrolysis and cross-linking route using lavender stem and potassium acetate as precursor. Benefiting from the presence of abundant defect and surface quinonyl groups, porous carbon shows an ultra-high specific capacitance of 401 F g-1 (1 A g-1) and a high capacitance retention of 63% at a high current density of 100 A g-1 in a KOH solution. Meanwhile, as a capacitive deionization electrode material, it also exhibited a high adsorption capacity of 25.5 mg g-1 in 500 mg L-1 NaCl solution at 1.2 V. Theoretical density functional theory (DFT) calculation demonstrates that surface quinonyl groups and carbon defects can synergistically facilitate the adsorption of K+ and Na+ during the charge/discharge process. This work provides a new perspective for understanding the role of surface oxygen-containing groups and intrinsic defects of porous carbon materials in electrochemical energy storage and desalination applications.

Tuning the Zn2+ solvation structure in dual-salts hybrid aqueous electrolyte to stabilize the Zn metal anode.

Aqueous Zn-ion battery is expected to become a substitute for Li-ion battery due to its inherent safety, low cost, and environmental friendliness. Dendrite growth and side reaction problems during electroplating lead to its low Coulombic efficiency and unsatisfactory life, which greatly limits its practical application. Here, we propose a dual-salts hybrid electrolyte, which alleviates the above issues by mixing Zn(OTf)2 to ZnSO4 solution. Extensive tests and MD simulations have shown that the dual-salts hybrid electrolyte can regulate the solvation structure of Zn2+, facilitating uniform Zn deposition, and inhibiting side reactions and dendrite growth. Hence, the dual-salts hybrid electrolyte exhibits good reversibility in Zn//Zn batteries, which can provide a lifetime of more than 880 h at 1 mA cm-2 and 1 mAh cm-2. Moreover, the average Coulombic efficiency of Zn//Cu cells in hybrid system can reach 98.2% after 520 h, much better than that of 90.7% in pure ZnSO4 electrolyte and 92.0% in pure Zn(OTf)2 electrolyte. Benefiting from the fast ion exchange rate and high ion conductivity, Zn-ion hybrid capacitor in hybrid electrolyte also displays excellent stability and capacitive performance. This effective strategy for dual-salts hybrid electrolytes provides a promising direction for designing aqueous electrolytes for Zn-ion batteries.