A scalable Li-Al-Cl stratified structure for stable all-solid-state lithium metal batteries.

Sulfides are promising electrolyte materials for all-solid-state Li metal batteries due to their high ionic conductivity and machinability. However, compatibility issues at the negative electrode/sulfide electrolyte interface hinder their practical implementation. Despite previous studies have proposed considerable strategies to improve the negative electrode/sulfide electrolyte interfacial stability, industrial-scale engineering solutions remain elusive. Here, we introduce a scalable Li-Al-Cl stratified structure, formed through the strain-activated separating behavior of thermodynamically unfavorable Li/Li9Al4 and Li/LiCl interfaces, to stabilize the negative electrode/sulfide electrolyte interface. In the Li-Al-Cl stratified structure, Li9Al4 and LiCl are enriched at the surface to serve as a robust solid electrolyte interphase and are diluted in bulk by Li metal to construct a skeleton. Enabled by its unique structural characteristic, the Li-Al-Cl stratified structure significantly enhances the stability of negative electrode/sulfide electrolyte interface. This work reports a strain-activated phase separation phenomenon and proposes a practical pathway for negative electrode/sulfide electrolyte interface engineering.

Deciphering the critical role of interstitial volume in glassy sulfide superionic conductors.

Sulfide electrolytes represent a crucial category of superionic conductors for all-solid-state lithium metal batteries. Among sulfide electrolytes, glassy sulfide is highly promising due to its long-range disorder and grain-boundary-free nature. However, the lack of comprehension regarding glass formation chemistry has hindered their progress. Herein, we propose interstitial volume as the decisive factor influencing halogen dopant solubility within a glass matrix. We engineer a Li3PS4-Li4SiS4 complex structure within the sulfide glassy network to facilitate the release of interstitial volume. Consequently, we increase the dissolution capacity of LiI to 40 mol% in 75Li2S-25P2S5 glass. The synthesized glass exhibits one of the highest ionic conductivities among reported glass sulfides. Furthermore, we develop a glassy/crystalline composite electrolyte to mitigate the shortcomings of argyrodite-type sulfides by utilizing our synthesized glass as the filler. The composite electrolytes effectively mitigate Li intrusion. This work unveils a protocol for the dissolution of halogen dopants in glass electrolytes.

Improving the Conductivity of Solid Polymer Electrolyte by Grain Reforming.

Polyethylene oxide (PEO)-based solid polymer electrolyte (SPE) is considered to have great application prospects in all-solid-state li-ion batteries. However, the application of PEO-based SPEs is hindered by the relatively low ionic conductivity, which strongly depends on its crystallinity and density of grain boundaries. In this work, a simple and effective press-rolling method is applied to reduce the crystallinity of PEO-based SPEs for the first time. With the rolled PEO-based SPE, the LiFePO4/SPE/Li all-solid li-ion battery delivers a superior rechargeable specific capacity of 162.6 mAh g-1 with a discharge-charge voltage gap of 60 mV at a current density of 0.2 C with a much lower capacity decay rate. The improvement of electrochemical properties can be attributed to the press-rolling method, leading to a doubling conductivity and reduced activation energy compared with that of electrolyte prepared by traditional cast method. The present work provides an effective and easy-to-use grain reforming method for SPE, worthy of future application.

Tin dioxide-based nanomaterials as anodes for lithium-ion batteries.

The development of new electrode materials for lithium-ion batteries (LIBs) has attracted significant attention because commercial anode materials in LIBs, like graphite, may not be able to meet the increasing energy demand of new electronic devices. Tin dioxide (SnO2) is considered as a promising alternative to graphite due to its high specific capacity. However, the large volume changes of SnO2 during the lithiation/delithiation process lead to capacity fading and poor cycling performance. In this review, we have summarized the synthesis of SnO2-based nanomaterials with various structures and chemical compositions, and their electrochemical performance as LIB anodes. This review addresses pure SnO2 nanomaterials, the composites of SnO2 and carbonaceous materials, the composites of SnO2 and transition metal oxides, and other hybrid SnO2-based materials. By providing a discussion on the synthesis methods and electrochemistry of some representative SnO2-based nanomaterials, we aim to demonstrate that electrochemical properties can be significantly improved by modifying chemical composition and morphology. By analyzing and summarizing the recent progress in SnO2 anode materials, we hope to show that there is still a long way to go for SnO2 to become a commercial LIB electrode and more research has to be focused on how to enhance the cycling stability.

[Effect of phytohemagglutinin (PHA) from Yunnan white kidney bean on development of mouse embryos].

OBJECTIVE: To study the effect of different concentration of phytohemagglutinin (PHA) on mouse embryo development. METHOD: In experiment 1, crude and purified PHA extracted from Yunnan white kidney bean with different concentration were added into M16 culture medium, the final concentration of PHA were: 50, 100, 200, 500, 1 000, 2 000 and 5 000 mg x L(-1) respectively. 2-cell stage embryos were collected and cultured in PHA containing or control medium for 72-96 h and their development were recorded. In experiment 2, different stage of embryos from 1-cell to blastocyst were treated by different concentrations of PHA same as experiment 1 and 10 000 mg x L(-1) in culture medium for 24 h before washing and cultured in M16 + PVA without PHA to blastocyst or hatching blastocyst stage. RESULT: Low concentrations PHA at 50-100 mg x L(-1) promoted embryo development and increased the number of blastocyst stage embryos. In contrast, high concentrations of PHA (> 1 000 mg x L(-1)) blocked the embryos development from 1-cell to blastocyst stage and showed apoptosis morphology or death. CONCLUSION: Depending on the concentrations, PHA from white kidney bean shown promotion or inhibition on mouse embryo development. 1-cell stage embryo shown more sensitive to PHA treatment than that of later stage embryos. Pretreatment 24 h in PHA containing medium can influence the further development of embryos. Low concentrations of PHA is benefit to embryo development, but high concentrations of PHA (> 1 000 mg x L(-1)) will block of the development of embryos.

Cotransfer of parthenogenetic embryos improves the pregnancy and implantation of nuclear transfer embryos in mouse.

The majority of somatic cell nuclear transfer (SCNT) clones dies in the peri- or postimplantation period. Improvement of the full-term healthy pregnancy rates is a key issue for the economical viability and animal welfare profile of SCNT technology. In this study the effects of cotransfer of parthenogenetic or fertilized embryos on the pregnancy and implantation of SCNT mouse embryos have been investigated. SCNT embryos were produced by transferring cumulus cell nuclei into enucleated B6D2F1 mouse oocytes, whereas parthenogenetically activated (PA) and fertilized embryos were derived from ICR mice by artificial activation with strontium and in vivo fertilization, respectively. SCNT embryos were inferior in their developmental capacity to blastocyst compared to either PA or fertilized embryos. SCNT embryos were transferred alone (SCNT), or cotransferred with two to three PA (SCNT + PA) or fertilized (SCNT + Fert) embryos into the oviducts of an ICR recipient. Both pregnancy and implantation rates originating from clones in the SCNT + PA group were significantly higher than those of SCNT group (p < 0.05). The weight of placentas of clones derived from SCNT, SCNT + PA, or SCNT + Fert was in all cases significantly higher than that of fertilized controls (p < 0.001). Most of the clones derived from SCNT embryos cotransferred with PA or fertilized embryos survived to adulthood and were fertile and healthy according to histopathological observations. Our results demonstrate in mouse that cotransfer of PA embryos improves the pregnancy and implantation of SCNT embryos without compromising the overall health of the resulting clones.