MoS2/MXene Van der Waals heterojunction-based electrochemiluminescence sensor for triple negative breast cancer detection.

The van der Waals heterojunction is able to combine the advantages of different materials and has potential to be used in biosensing researches. In this study, we developed a novel van der Waals heterojunction by combining MXene and MoS2 nanosheets for the electrochemiluminescence (ECL) sensing applications. This van der Waals heterojunction material not only possessed the superior conductivity of MXene, but also regulated the electron transport. Additionally, the incorporation of MoS2 nanosheets into the MXene interlayers significantly enhances the material stability. Meanwhile, nitrogen-rich quantum dots (N dots) were synthesized as ECL tags with an impressive nitrogen content of up to 75 %. By integrating the ECL response of N dots within the van der Waals heterojunction, we established a highly efficient sensing system for miRNA-373, which overexpressed in triple negative breast cancer tissues. The van der Waals heterojunction-based biosensor can enhance the ECL signal of N dots effectively to detect miRNA-373 from 1 fM to 1 µM. Consequently, the developed sensing system holds promise for the early detection of metastasis of the triple-negative breast cancer, paving the way for the effective clinical interventions.

Enzyme-free and rapid colorimetric analysis of osteopontin via triple-helix aptamer probe coupled with catalytic hairpin assembly reaction.

BACKGROUND: Osteopontin (OPN) is closely associated with tumorigenesis, growth, invasion, and immune escape and it serves as a plasma biomarker for hepatocellular carcinoma (HCC). Nevertheless, the accurate and rapid detection of low-abundance OPN still poses significant challenges. Currently, the majority of protein detection methods rely heavily on large precision instruments or involve complex procedures. Therefore, developing a simple, enzyme-free, rapid colorimetric analysis method with high sensitivity is imperative. RESULTS: In this study, we have developed a portable colorimetric biosensor by integrating the triple-helix aptamer probe (THAP) and catalytic hairpin assembly (CHA) strategy, named as T-CHA. After binding to the OPN, the trigger probe can be released from THAP, then initiates the CHA reaction and outputs the signal through the formation of a G-quadruplex/Hemin DNAzyme with horseradish peroxidase-like activity. Consequently, this colorimetric sensor achieves visual free-labeled detection without additional fluorophore modification and allows for accurate quantification by measuring the optical density of the solution at 650 nm. Under optimal conditions, the logarithmic values of various OPN concentrations exhibit satisfactory linearity in the range of 5 pg mL-1 to 5 ng mL-1, with a detection limit of 2.04 pg mL-1. Compared with the widely used ELISA strategy, the proposed T-CHA strategy is rapid (∼105 min), highly sensitive, and cost-effective. SIGNIFICANCE: The T-CHA strategy, leveraging the low background leakage of THAP and the high catalytic efficiency of CHA, has been successfully applied to the detection of OPN in plasma, demonstrating significant promise for the early diagnosis of HCC in point-of-care testing. Given the programmability of DNA and the universality of T-CHA, it can be readily modified for analyzing other useful tumor biomarkers.

Effects of Se-enriched yeast on the amelioration of atrazine-induced meat quality degradation.

Atrazine (ATR) is herbicide that causes serious harm to the environment and threatens human food safety. Se-enriched yeast is the best organic selenium source for protecting cells from damage caused by poisonous substances. To explore mechanism of ATR on meat quality degradation and potential protective effects of Se-enriched yeast on ATR-induced muscle injury, quails were treated with ATR and/or Se-enriched yeast for 28 days. The results found ATR disrupted muscle fiber structure and decreased pH, tenderness, water-holding capacity, essential amino acid content and polyunsaturated fatty acid content. ATR aggravated oxidative stress and inflammation by inhibiting Nrf2 pathway and activating NF-κB pathway, ultimately causing apoptosis. However, Se-enriched yeast alleviated ATR-induced alterations in muscle chemical and physical properties by inhibiting oxidative stress and inflammation. Taken together, these results revealed that ATR exposure caused meat quality degradation and Se-enriched yeast had the potential to counteract ATR-induced myotoxicity by inhibiting oxidative stress and inflammation.

Dual-ligand Eu-MOF/CuS@Au Heterostructure Array-based ECL Sensor for MiRNA-128 Detection in Glioblastoma Tissues.

In this work, the dual-ligand lanthanide metal-organic framework (MOF)-based electrochemiluminescence (ECL) sensor was constructed for the detection of miRNA-128 in glioblastoma (GBM) diagnosis. The luminescent Eu-MOF (EuBBN) was synthesized with terephthalic acid (BDC) and 2-amino terephthalic acid (BDC-NH2) as dual-ligand. Due to the antenna effect, EuBBN with conjugated-π structure exhibited strong luminescent signal and high quantum efficiency, which can be employed as ECL nanoprobe. Furthermore, the novel plasmonic CuS@Au heterostructure array has been prepared. The localized surface plasmon resonance coupling effect of the CuS@Au heterostructure array can amplify the ECL signal of EuBBN significantly. The EuBBN/CuS@Au heterostructure array-based sensing system has been prepared for the detection of miRNA-128 with a wide linear range from 1 fM to 1 nM and a detection limit of 0.24 fM. Finally, miRNA-128 in the clinic GBM tissue sample has been analysis for the distinguish of tumor grade successfully. The results demonstrated that the dual-ligand MOF/CuS@Au heterostructure array-based ECL sensor can provide important support for the development of GBM diagnosis.

Cu superparticle-based aggregation induced enhancement strategy with PVDF-HFP/CeVO4 NP sensing interface for miR-103a detection.

Aggregation-induced emission (AIE) has been widely used in research on electrochemiluminescence (ECL) due to its excellent luminescence intensity. In this work, copper superparticles (Cu SPs) were used to construct ECL biosensor to detect the microRNA-103a (miRNA-103a) in triple-negative breast cancer (TNBC) tumor tissues. Firstly, GSH-capped copper clusters were used as precursors to prepare Cu SPs by the AIE effect. Compared with clusters, Cu SPs possessed higher luminescence performance and energy stability, making them an ideal choice for ECL nanoprobe. The film of PVDF-HFP/CeVO4 NPs was constructed and modified with CPBA and GSH as the sensing interface (PCCG). The PCCG film displayed good conductivity and hydrophilicity, and desirable mechanical stability. Moreover, the PCCG film can induce high carrier mobility rates and dissociate large amounts of the co-reactant K2S2O8 to enhance the ECL intensity of Cu SPs. As a result, the prepared ECL sensor with the catalyzed hairpin assembly (CHA) strategy was employed to quantify miRNA-103a in the range of 100 fM to 100 nM. The biosensor provided a novel analytical approach for the clinical diagnosis of TNBC.

Bright luminescent Zn2GeO4:Mn NP/MXene hydrogel-based ECL biosensor for glioblastoma diagnosis.

In this work, miRNA-10b in the glioblastoma (GBM) tumor tissues has been detected by a novel electrochemiluminescence (ECL) biosensor. Firstly, a new kind of bright luminescent Zn2GeO4:Mn NPs were prepared as ECL nanoprobe, which possessed high fluorescence quantum yield and ECL quantum efficiency. Secondly, Ti3C2 MXene hydrogel (MXG) have been developed as the sensing interface. The MXG retained the inherent biocompatibility and mechanical features of hydrogel. Furthermore, the uniform distribution of metallic Ti3C2 MXene in the hydrogel microstructure provided the good conductivity and multiple binding sites for biomolecules. MXene also can promote the separation of the electrons and holes to accelerate the electron-transfer rate and improve ECL efficiency. Due to these synergistic effects, the screen printed electrode was successfully modified with MXG as sensing platform to enhance the ECL intensity of Zn2GeO4:Mn NP, which greatly improved the detection efficiency and facilitated the high-throughput analysis. Finally, the toehold mediated strand displacement (TMSD) strategy was employed with then biosensor to detect miRNA-10b with the range of 10 fM to 1 nM. The limit of detection was 5 fM. This ECL biosensor has been used to analyze miRNA-10b expression in GBM tumor tissues, which possessed the great potential value for clinical diagnosis.

Hollow Metal-Organic Framework/MXene/Nanocellulose Composite Films for Giga/Terahertz Electromagnetic Shielding and Photothermal Conversion.

With the continuous advancement of communication technology, the escalating demand for electromagnetic shielding interference (EMI) materials with multifunctional and wideband EMI performance has become urgent. Controlling the electrical and magnetic components and designing the EMI material structure have attracted extensive interest, but remain a huge challenge. Herein, we reported the alternating electromagnetic structure composite films composed of hollow metal-organic frameworks/layered MXene/nanocellulose (HMN) by alternating vacuum-assisted filtration process. The HMN composite films exhibit excellent EMI shielding effectiveness performance in the GHz frequency (66.8 dB at Ka-band) and THz frequency (114.6 dB at 0.1-4.0 THz). Besides, the HMN composite films also exhibit a high reflection loss of 39.7 dB at 0.7 THz with an effective absorption bandwidth up to 2.1 THz. Moreover, HMN composite films show remarkable photothermal conversion performance, which can reach 104.6 °C under 2.0 Sun and 235.4 °C under 0.8 W cm-2, respectively. The unique micro- and macro-structural design structures will absorb more incident electromagnetic waves via interfacial polarization/multiple scattering and produce more heat energy via the local surface plasmon resonance effect. These features make the HMN composite film a promising candidate for advanced EMI devices for future 6G communication and the protection of electronic equipment in cold environments.

Torque modulation mechanism of the knee joint during balance recovery.

Exploring the torque modulation mechanisms of human joints is critical for analyzing the human balance control system and developing natural human-machine interactions for balance support. However, the knee joint is often overlooked in biomechanical models because of its limited range of motion during balance recovery. This poses a challenge in establishing mathematical models for the knee joint's torque modulation mechanisms using computer simulations based on the inverted pendulum model. This study aims to provide a simplified linear feedback model inspired by sensorimotor transformation theory to reveal the torque modulation mechanism of the knee joint. The model was validated using data from experiments involving support-surface translation perturbations. The goodness-of-fit metrics of the model, including R2 values and root mean square errors (RMSE), demonstrated strong explanatory power (R2 ranged from 0.77 to 0.90) and low error (RMSE ranging from 0.035 to 0.072) across different perturbation magnitudes and directions. Through pooling samples across various perturbation conditions and conducting multiple fits, this model revealed that knee torque is modulated using a direction-specific strategy with adaptable feedback gains. These results suggest that the proposed simplified linear model can be used to develop assistive systems and retrieve insights on balance recovery mechanisms.

Magnetoplasmonic Metasurface-Modulated Electrochemiluminescence Strategy for Extracellular Vesicle Detection.

Due to the ideal optical manipulation ability, the metasurface has broad prospects in the development of novel optical research. In particular, an active metasurface can control optical response through external stimulus, which has attracted great research interest. However, achieving effective modulation of the optical response is a significant challenge. In this work, we have developed a novel electrochemiluminescence (ECL) signal modulation strategy by an active magnetoplasmonic metasurface under an external magnetic field. The magnetoplasmonic metasurface was assembled based on yolk-shell Fe3O4@Au nanoparticles (Fe3O4@Au YS-NPs). On the one hand, the yolk-shell structure of Fe3O4@Au YS-NPs possessed the surface plasmon coupling effect and cavity-based Purcell effect, which provided high-intensity electromagnetic hot spots in the magnetoplasmonic metasurface. On the other hand, due to the strong magnetic response of the Fe3O4 core, the local magnetic field was induced by the external magnetic field, which further generated Lorentz force acting on the free electrons of Au nanoshells with strong optical anisotropy. The plasmon frequency of the metasurface can be effectively modulated by the Lorentz force effect. As a result, the ECL signal of nitrogen dots (N dots) was dynamically modulated and significantly enhanced at a specific polarization angle by the magnetoplasmonic metasurface under the variable external magnetic field. Based on the luminescence modulation ability and structure feature, the magnetoplasmonic metasurface was further established successfully as a sensing interface for gastric cancer (GC) extracellular vesicle (EV) detection. This study illustrated that the electromagnetic response of the active metasurface can effectively improve the optical modulation ability and luminescence sensing performance.

AmCBF1 activates the expression of GhClpR1 to mediate dark-green leaves in cotton (Gossypium hirsutum).

KEY MESSAGE: The transcription factor AmCBF1 deepens the leaf colour of transgenic cotton by binding to the promoter of the chloroplast development-related protein GhClpR1 to promote photosynthesis. The ATP-dependent caseinolytic protease (Clp protease) family plays a crucial role within chloroplasts, comprising several Clp proteins to maintain chloroplast homeostasis. At present, research on Clp proteins mainly focuses on Arabidopsis, leaving its function in other plants, particularly in crops, less explored. In this study, we overexpressed AmCBF1 from Ammopiptanthus mongolicus (A. mongolicus) in wild type (R15), and found a significant darkening of leaf colour in transgenic plants (L28 and L30). RNA-seq analysis showed an enrichment of pathways associated with photosynthesis. Subsequent screening of differentially expressed genes revealed a significant up-regulation of GhClpR1, a gene linked to chloroplast development, in the transgenic strain. In addition, GhClpR1 was consistently expressed in upland cotton, with the highest expression observed in leaves. Subcellular localization analysis revealed that the protein encoded by GhClpR1 was located in chloroplasts. Yeast one hybrid and dual luciferase experiments showed that the AmCBF1 transcription factor positively regulates the expression of GhClpR1. VIGs-mediated silencing of GhClpR1 led to a significant yellowing phenotype in the leaves. This was accompanied by a reduction in chlorophyll content, and microscopic examination of chloroplast ultrastructure revealed severe developmental impairment. Finally, yeast two-hybrid assays showed that GhClpR1 interacts with the Clp protease complex accessory protein GhClpT2. Our study provides a foundation for studying the function of the Clp protease complex and a new strategy for cultivating high-light-efficiency cotton resources.

Nanocluster/metal-organic framework nanosheet-based confined ECL enhancement biosensor for the extracellular vesicle detection.

Gastric cancer (GC) was one of the most common cancers with high mortality. The detection of GC peritoneal metastasis had important significance. In this work, we have developed the novel electrochemiluminescence (ECL) biosensor to detect microRNA in GC extracellular vesicle (EV). Firstly, in situ growth of Cu nanocluster (Cu NC) on the metal-organic frameworks (MOFs) nanosheet was achieved successfully. Due to the confinement effect, Cu NCs in the porous structure of Zn MOF possessed the high quantum yield and good stability. Meanwhile, Zn MOF provided good electrochemical activity for the ECL reaction. Furthermore, the nanosized MOFs did not only act as sensing platform to load Cu NCs and link biomolecules, but also reduce steric hindrance effect for biomolecular recognition. Additionally, Au NPs/MXene and phospholipid layer were prepared and modified on the electrode, which can regulate electron transfer and improve the target recognition efficiency. The Cu NCs/Zn MOF nanosheet-based ECL sensor was employed to detect miRNA-421 from 1 fM to 1 nM with a detection limit of 0.5 fM. Finally, extracellular vesicles form clinic GC patient ascites were extracted and analyzed. The results showed that the constructed biosensor can be used for the GC peritoneal metastasis diagnosis.

Evaluation of monolithic crystal detector with dual-ended readout utilizing multiplexing method.

Objective.Monolithic crystal detectors are increasingly being applied in positron emission tomography (PET) devices owing to their excellent depth-of-interaction (DOI) resolution capabilities and high detection efficiency. In this study, we constructed and evaluated a dual-ended readout monolithic crystal detector based on a multiplexing method.Approach.We employed two 12 × 12 silicon photomultiplier (SiPM) arrays for readout, and the signals from the 12 × 12 array were merged into 12 X and 12 Y channels using channel multiplexing. In 2D reconstruction, three methods based on the centre of gravity (COG) were compared, and the concept of thresholds was introduced. Furthermore, a light convolutional neural network (CNN) was employed for testing. To enhance depth localization resolution, we proposed a method by utilizing the mutual information from both ends of the SiPMs. The source width and collimation effect were simulated using GEANT4, and the intrinsic spatial resolution was separated from the measured values.Main results.At an operational voltage of 29 V for the SiPM, an energy resolution of approximately 12.5 % was achieved. By subtracting a 0.8 % threshold from the total energy in every channel, a 2D spatial resolution of approximately 0.90 mm full width at half maximum (FWHM) can be obtained. Furthermore, a higher level of resolution, approximately 0.80 mm FWHM, was achieved using a CNN, with some alleviation of edge effects. With the proposed DOI method, a significant 1.36 mm FWHM average DOI resolution can be achieved. Additionally, it was found that polishing and black coating on the crystal surface yielded smaller edge effects compared to a rough surface with a black coating.Significance.The introduction of a threshold in COG method and a dual-ended readout scheme can lead to excellent spatial resolution for monolithic crystal detectors, which can help to develop PET systems with both high sensitivity and high spatial resolution.

Review of neurotoxicity of T-2 toxin.

T-2 toxin is a representative trichothecene that is widely detected in corn, wheat and other grain feeds. T-2 toxin has stable physical and chemical properties, making it difficult to remove from food and feed. Hence, T-2 toxin has become an unavoidable pollutant in food for humans and animals. T-2 toxin can enter brain tissue by crossing the blood-brain barrier and leads to congestion, swelling and even apoptosis of neurons. T-2 toxin poisoning can directly lead to clinical symptoms (anti-feeding reaction and decline of learning and memory function in humans and animals). Maternal T-2 toxin exposure also exerted toxic effects on the central nervous system of offspring. Oxidative stress is the core neurotoxicity mechanism underlying T-2 toxin poison. Oxidative stress-mediated apoptosis, mitochondrial oxidative damage and inflammation are all involved in the neurotoxicity induced by T-2 toxin. Thus, alleviating oxidative stress has become a potential target for relieving the neurotoxicity induced by T-2 toxin. Future efforts should be devoted to revealing the neurotoxic molecular mechanism of T-2 toxin and exploring effective therapeutic drugs to alleviate T-2 toxin-induced neurotoxicity.

Microzone-Acidification-Driven Degradation Mechanism of the NiFe-Based Anode in Seawater Electrolysis.

The anode stability is critical for efficient and reliable seawater electrolyzers. Herein, a NiFe-based film catalyst was prepared by anodic oxidation to serve as a model electrode, which exhibited a satisfactory oxygen evolution performance in simulated alkaline seawater (1 M KOH + 0.5 M NaCl) with an overpotential of 348 mV at 100 mA cm-2 and a long-term stability of over 100 h. After that, the effects of the current density and bulk pH of the electrolyte on its stability were evaluated. It was found that the electrode stability was sensitive to electrolysis conditions, failing at 20 mA cm-2 in 0.1 M KOH + 0.5 M NaCl but over 500 mA cm-2 in 0.5 M KOH + 0.5 M NaCl. The electrode dissolved, and some precipitates immediately formed at the region very close to the electrode surface during the electrolysis. This can be ascribed to the pH difference between the electrode/electrolyte interface and the bulk electrolyte under anodic polarization. In other words, the microzone acidification accelerates the corrosion of the electrode by Cl-, thus affecting the electrode stability. The operational performances of the electrode under different electrolysis conditions were classified to further analyze the degradation behavior, which resulted in three regions corresponding to the stable oxygen evolution, violent dissolution-precipitation, and complete passivation processes, respectively. Thereby increasing the bulk pH could alleviate the microzone acidification and improve the stability of the anode at high current densities. Overall, this study provides new insights into understanding the degradation mechanism of NiFe-based catalysts and offers electrolyte engineering strategies for the application of anodes.

The luminescent principle and sensing mechanism of metal-organic framework for bioanalysis and bioimaging.

Metal-organic frameworks (MOFs) porous material have obtained more and more attention during the past decade. Among various MOFs materials, luminescent MOFs with specific chemical characteristics and excellent optical properties have been regarded as promising candidates in the research of cancer biomarkers detection and bioimaging. Therefore, the latest advances and the principal biosensing and imaging strategies based on the luminescent MOFs were discussed in this review. The effective synthesis methods of luminescent MOFs were emphasized firstly. Subsequently, the luminescent principle of MOFs has been summarized. Furthermore, the luminescent MOF-based sensing mechanisms have been highlighted to provide insights into the design of biosensors. The designability of LMOFs was suitable for different needs of biorecognition, detection, and imaging. Typical examples of luminescent MOF in the various cancer biomarkers detection and bioimaging were emphatically introduced. Finally, the future outlooks and challenges of luminescent MOF-based biosensing systems were proposed for clinical cancer diagnosis.

Robust and Multifunctional Ti3 C2 Tx /Modified Sawdust Composite Paper for Electromagnetic Interference Shielding and Wearable Thermal Management.

Robust, ultrathin, and environmental-friendliness papers that synergize high-efficiency electromagnetic interference (EMI) shielding, personal thermal management, and wearable heaters are essential for next-generation smart wearable devices. Herein, MXene nanocomposite paper with a nacre-like structure for EMI shielding and electrothermal/photothermal conversion is fabricated by vacuum filtration of Ti3 C2 Tx MXene and modified sawdust. The hydrogen bonding and highly oriented structure enhance the mechanical properties of the modified sawdust/MXene composite paper (SM paper). The SM paper with 50 wt% MXene content shows a strength of 23 MPa and a toughness of 13 MJ·M-3 . The conductivity of the SM paper is 10 195 S·m-1 , resulting in an EMI shielding effectiveness (SE) of 67.9 dB and a specific SE value (SSE/t) of 8486 dB·cm2 ·g-1 . In addition, the SM paper exhibits excellent thermal management performance including high light/electro-to-thermal conversion, rapid Joule heating and photothermal response, and sufficient heating stability. Notably, the SM paper exhibits low infrared emissivity and distinguished infrared stealth performance, camouflaging a high-temperature heater surface of 147-81 °C. The SM-based e-skin achieves visualization of Joule heating and realizes human motions monitoring. This work presents a new strategy for designing MXene-based wearable devices with great EMI shielding, artificial intelligence, and thermal management applications.

Stability in the leaf functional traits of understory herbaceous species after 12-yr of nitrogen addition in temperate larch plantations.

Leaf functional traits play critical roles in plant functioning. Although the functional traits of overstory trees have been extensively studied, minimal research has been conducted regarding understory species, despite the understory layer is an important component of temperate forests. Such insufficiency limit the broader understanding of processes and functions in forest ecosystems, particularly when under the increasing atmospheric nitrogen (N) deposition. Here, we investigated the responses of 18 leaf functional traits in six understory herbaceous species within young and mature stands (three species per stand) in larch (Larix principis-rupprechtii) plantations that subjected to 12 years of anthropogenic N addition. We found that N addition did not significantly impact the photosynthetic traits of understory herbaceous species in either stand; it only led to increased chlorophyll content in Geum aleppicum Jacq. Similarly, with the exception of decreases in the predawn leaf water potential of Sanguisorba officinalis L., N addition did not significantly affect leaf hydraulic traits. With the exception of changes to adaxial epidermis thickness in Potentilla chinensis Ser. (decreased) and G. aleppicum (increased), N addition had negligible effects on leaf anatomical traits and specific leaf area, however, interspecific variations in the plasticity of leaf anatomical traits were observed. Stable responses to N addition were also observed for nonstructural carbohydrates (NSC) and their components (soluble sugars and starch), with the exception of Polygonum divaricatum L., which exhibited increases in NSC. Overall, our results suggest that the functional traits of understory herbaceous species exhibit stability under conditions of long-term N enrichment in temperate plantations.

Psychosocial factors of insomnia in depression: a network approach.

BACKGROUND: Insomnia symptoms in patients with major depressive disorder (MDD) are common and deleterious. Childhood trauma, personality traits, interpersonal distress, and social support contribute to insomnia, but how they interact to affect insomnia remains uncertain. METHODS: A total of 791 patients with MDD completed the Insomnia Severity Index, Eysenck Personality Questionnaire, Interpersonal Relationship Comprehensive Diagnostic Scale, Childhood Trauma Questionnaire, Social Support Rating Scale and Hamilton Depression Scale-17. This study utilized network analyses to identify the central symptoms of insomnia and their associations with psychosocial factors. RESULTS: Worrying about sleep was identified as the central symptom in the insomnia network, insomnia and associated personality network, insomnia and associated interpersonal disturbance network, insomnia and associated childhood trauma network, insomnia and associated social support network, and the integrated network of insomnia symptoms and associated psychosocial factors. In the networks of insomnia symptoms and individual psychosocial factors, most psychosocial factors (other than childhood trauma) were directly or indirectly related to insomnia symptoms; however, neuroticism was the only factor directly associated with insomnia symptoms before and after controlling for covariates. In the final integrated network of insomnia symptoms and psychosocial factors, neuroticism was a bridge node and mediated the relationships of social support and interpersonal disturbances with insomnia symptoms, which is clearly presented in the shortest pathways. CONCLUSIONS: Worrying about sleep and neuroticism were prominent in the integrated network of insomnia symptoms and associated psychosocial factors, and the edge between them connected psychosocial factors and insomnia symptoms in MDD patients.

Dynamically Metasurface-Modulated Electrochemiluminescence Polarization Coupling Angle Strategy for miR-142-3p Detection.

The combination of the electrochemiluminescence (ECL) technique with nanophotonics research can spark new analytical and sensing applications. Herein, we developed a novel modulation strategy of the ECL polarization angle based on the dynamically tunable few-layer metasurface. The bilayer metasurface consisted of a fixed Au-Ag core-shell nanocube array (Au@Ag NCA) layer with strong plasmonic hot spots and different amounts of the Au nanoparticles@MoS2 heterostructure nanosheet (0D-2D HNS) layer with strong metal-support interaction. Due to the interference and near-field coupling between layers, the bilayer metasurface can strongly redistribute the local electromagnetic field and energy in the ECL system, which not only significantly amplified the ECL signal but also modulated the polarization coupling angle. Therefore, the novel ECL polarization angle-resolved sensing strategy has been developed, which was beneficial to improve the sensitivity and resolution of ECL sensing. A dynamically tunable metasurface-based ECL biosensor was successfully used to detect the asthma-related miRNA-142-3p (miR-142-3p). Moreover, the simulation calculations of the electromagnetic field revealed the unique optical activity of the metasurface. This study brought the insightful understanding of the metasurface-modulated optical signal and provided a new idea to construct novel sensing platforms.

Flexible MXene/Nanocellulose Composite Aerogel Film with Cellular Structure for Electromagnetic Interference Shielding and Photothermal Conversion.

With the rapid development of wearable devices and integrated systems, protection against electromagnetic waves is an issue. For solving the problems of poor flexibility and a tendency to corrode traditional electromagnetic interference (EMI) shielding materials, two-dimensional (2D) nanomaterial MXene was employed to manufacture next-generation EMI shielding materials. Vacuum-assisted filtration combined with the liquid nitrogen prefreezing strategy was adopted to prepare flexible MXene/cellulose nanofibers (CNFs) composite aerogel film with unique cellular structure. Here, CNFs were employed as the reinforcement, and such a cellular structure design can effectively improve the shielding effectiveness (SE). In particular, the composite shows an outstanding EMI SE of 54 dB. Furthermore, the MXene/CNFs composite aerogel film exhibited prominent and steady photothermal conversion ability, which could obtain the maximum equilibrium temperature of 89.4 °C under an 808 nm NIR laser. Thus, our flexible composite aerogel film with appealing cellular construction holds great promise for wearable EMI shielding materials and heating applications in a cold and complex practical environment.