BACKGROUND: Open tibial fractures often include severe bone loss and soft tissue defects and requires complex reconstructive operations. However, the optimal treatment is unclear. METHODS: This retrospective study enrolled patients with Gustilo type III open tibial fractures from January 2018 to January 2021 to assess the clinical utility of Masquelet technique together with microsurgical technique as a combined strategy for the treatment of open tibial fractures. The demographics and clinical outcomes including bone union time, infection, nonunion and other complications were recorded for analysis. The bone recovery quality was evaluated by the AOFAS Ankle-Hindfoot Scale score and the Paley criteria. RESULTS: We enrolled 10 patients, the mean age of the patients and length of bone defects were 31.7 years (range, 23-45 years) and 7.5 cm (range, 4.5-10 cm) respectively. Bone union was achieved for all patients, with an average healing time of 12.2 months (range, 11-16 months). Seven patients exhibited a bone healing time of less than 12 months, whereas 3 patients exhibited a bone healing time exceeding 12 months. No significant correlation was found between the length of bone loss and healing time. In addition, no deep infection or nonunion was observed, although 2 patients experienced wound fat liquefaction with exudates and 1 patient presented with a bloated skin flap. The average AOFAS Ankle-Hindfoot Scale score was 80.5 (range, 74-85), and all patients were evaluated as good or exellent based on the Paley criteria. CONCLUSIONS: Our study indicated that the use of the Masquelet technique and the microsurgical technique as a combined strategy is safe and effective for the treatment of Gustilo type III open tibial fractures.
Fracture Healing , Fractures, Open , Microsurgery , Tibial Fractures , Humans , Tibial Fractures/surgery , Tibial Fractures/diagnostic imaging , Male , Middle Aged , Retrospective Studies , Fractures, Open/surgery , Adult , Female , Microsurgery/methods , Young Adult , Treatment Outcome , Fracture Fixation, Internal/methods , Plastic Surgery Procedures/methods , Bone Transplantation/methods
INTRODUCTION: Respondent-driven sampling (RDS) is widely used to sample populations with higher risk of HIV infection for whom no sampling frames exist. However, few studies have been done to assess the reliability of RDS in real world settings. METHODS: We assessed the reliability of naïve RDS samples using five rounds of the National HIV Behavioral Surveillance - People Who Inject Drugs surveys in Newark, New Jersey from 2005 to 2018. Specifically, we compared the distributions of time-insensitive demographic characteristics in temporally adjacent RDS samples with Monte Carlo Two-Sample Kolmogorov-Smirnov Test with 100,000 replicates. The distributions of time-sensitive demographic characteristics were also compared as sensitivity analyses. RESULTS: The study showed that repeated RDS samples among people who inject drugs in the greater Newark area, New Jersey were reliable in most of time-insensitive demographics and recruitment homophily statistics. Sensitivity analyses of time-sensitive demographics also presented consistencies in most of temporally adjacent samples. CONCLUSIONS: In conclusion, RDS has the potential to provide reliable samples, but demographic characteristics of RDS samples may be easily biased by homophily. Future studies using RDS may need to pay more attention to potential homophily bias and consider necessary diagnostic procedures and sample adjustments.
The alkane cracking mechanism has been a subject of intense scrutiny, with carbonium and free radical mechanisms being two well-established pathways which correlate to solid acid catalysis and thermal cracking, respectively. However, despite an understanding of these two mechanisms, certain intricacies remain unexplored, especially when it comes to alternative reaction routes over solid base materials. This gap in the knowledge hinders optimization of the desired product selectivity of alkane cracking processes. In this work, solid superbases were first prepared by impregnation of NaNO3 on MgO. The Na/MgO catalysts were characterized by XRD, BET, XPS and CO2-TPD techniques. To investigate the role of solid base materials, propane cracking was conducted over MgO and Na/MgO. SiO2 was chosen as a representative of thermal cracking. Na/MgO showed better selectivity for light olefins than MgO or SiO2. Ethylene and light olefin selectivity could reach about 65.8% and 91.7%, respectively. Meanwhile, in terms of Na/MgO, the ratio of ethylene selectivity and propylene selectivity is greater than 2, exhibiting the advantage of selectivity for ethylene, which is obviously different from MgO and SiO2. Propane cracking over Na/MgO with different loading amounts of NaNO3 was investigated further. The conversion rates of the samples presented a "volcano curve" with increasing Na content. Furthermore, DFT calculation showed that the base-catalyzed process of the propane cracking reaction follows a carbanion mechanism. The better product distribution and stronger surface base sites can be ascribed to charge transfer arising from the loading of NaNO3.
Eighteen novel Ti(IV) complexes stabilized by different chelating amino-bis(phenolato) (ONNO, ONON, ONOO) ligands and 2,6-dipicolinic acid as a second chelator were synthesized with isolated yields ranging from 79 to 93%. Complexes were characterized by 1H and 13C-NMR spectroscopy, as well as by HRMS and X-Ray diffraction analysis. The good to excellent aqueous stability of these Ti(IV) complexes can be modulated by the substitutions on the 2-position of the phenolato ligands. Most of the synthesized Ti(IV) complexes demonstrated potent inhibitory activity against Hela S3 and Hep G2 tumor cells. Among them, the naphthalenyl based Salan type 2j, 2-picolylamine based [ONON] type 2n and N-(2-hydroxyethyl) based [ONOO] type 2p demonstrated up to 40 folds enhanced cytotoxicity compared to cisplatin together with a significantly reduced activity against healthy AML12 cells. The three Ti(IV) complexes exhibited fast cellular uptake by Hela S3 cells and induced almost exclusively apoptosis. 2j could trigger higher level of ROS generation than 2p and 2n.
The longhorned beetles are key players for the maintenance of biodiversity in the terrestrial ecosystem. As xylophagous cerambycid insects in Coleoptera, the beetles have evolved specialized olfactory and gustatory systems to recognize chemical cues in the surrounding habitats. Despite over 36,000 described species in the Cerambycidae family including a wood-boring pest Pharsalia antennata, only a limited number of them (<1 %) have been characterized regarding their chemical ecology at the molecular level. Here, we surveyed four membrane protein gene families in P. antennata related to chemoreception through transcriptomics, phylogenetics and expression profiling analyses. In total, 144 genes encoding 72 odorant receptors (ORs), 33 gustatory receptors (GRs), 23 ionotropic receptors (IRs), four sensory neuron membrane proteins (SNMPs) and 12 ionotropic glutamate receptors (iGluRs) were harvested from the transcriptome of multiple tissues including antennae and legs of both sexes. The lineage-specific expansion of PantORs possibly implied a diverse range of host plants in this beetle, supporting this correlation between the host range and olfactory receptor repertoire sizes across cerambycid species. Further phylogenetic analysis revealed that Group 2 was contributed mainly to the large OR gene repertoire in P. antennata, representing 18 genes in Group 2A and eight in Group 2B. On the other hand, some key chemosensory genes were identified by applying a phylogenetics approach, such as PantOR21 close to the 2-phenylethanol receptor in Megacyllene caryae, three carbon dioxide GRs and seven Antennal IRs (A-IRs) clades. We also determined sex- and tissue-specific expression profiles of 69 chemosensory genes, revealing the high expression of most PantORs in antennae. Noticeably, 10 sex-biased genes (six PantORs, three PantIRs and PantSNMP1a) were presented in antennae, five sex-biased PantGRs in legs and 39 sex-biased genes (15 PantORs, 13 PantGRs, eight PantIRs and three PantSNMPs) in abdomens. These findings have greatly enhanced our knowledge about the chemical ecology of P. antennata and identify candidate molecular targets for mediating smell and taste of this beetle.
One of the most important factors for the future application of circularly polarized luminescence (CPL) materials is their high dissymmetry factors (gem), and more and more studies are working tirelessly to focus on increasing the gem value. Herein, we chose an achiral liquid crystal polymer (LC-P) and two chiral binaphthyl-based inducers (R/S-3 and R/S-6) with different substitution positions (3,3' positions for R/S-3 and 6,6' positions for R/S-6) to construct chiral co-assemblies and explored their induced amplification CPL behaviors. Interestingly, after the thermal annealing treatment, this kind of chiral co-assembly (R/S-3)0.05-(LC-P)0.95 can emit a superior CPL signal (|gem| = 0.31 and λem = 424 nm), which achieves about 13-fold signal amplification in the spin-coated film, compared to (R/S-6)0.1-(LC-P)0.9 (|gem| = 0.023 and λem = 424 nm). This is because (R/S-3)0.05-(LC-P)0.95 could further co-assemble to form a more ordered arrangement LC state and generate regular helix nanofibers than that of (R/S-6)0.1-(LC-P)0.9. This work provides an efficient method for synthesizing high-quality CPL-active materials through the strategic manipulation of the structure of chiral binaphthyl-based inducers in chiral co-assembled LCP systems.
Species traits may determine plant interactions along with soil microbiome, further shaping plant-soil feedbacks (PSFs). However, how plant traits modulate PSFs and, consequently, the dominance of plant functional groups remains unclear. We used a combination of field surveys and a two-phase PSF experiment to investigate whether forbs and graminoids differed in PSFs and in their trait-PSF associations. When grown in forb-conditioned soils, forbs experienced stronger negative feedbacks, while graminoids experienced positive feedbacks. Graminoid-conditioned soil resulted in neutral PSFs for both functional types. Forbs with thin roots and small seeds showed more-negative PSFs than those with thick roots and large seeds. Conversely, graminoids with acquisitive root and leaf traits (i.e., thin roots and thin leaves) demonstrated greater positive PSFs than graminoids with thick roots and tough leaves. By distinguishing overall and soil biota-mediated PSFs, we found that the associations between plant traits and PSFs within both functional groups were mainly mediated by soil biota. A simulation model demonstrated that such differences in PSFs could lead to a dominance of graminoids over forbs in natural plant communities, which might explain why graminoids dominate in grasslands. Our study provides new insights into the differentiation and adaptation of plant life-history strategies under selection pressures imposed by soil biota.
The fibrous extracellular matrix (ECM) is vital for tissue regeneration and impacts implanted device treatments. Previous research on fibrous biomaterials shows varying cellular reactions to surface orientation, often due to unclear interactions between surface topography and substrate elasticity. Our study addresses this gap by achieving the rapid creation of hydrogels with diverse fibrous topographies and varying substrate moduli through a surface printing strategy. Cells exhibit heightened traction force on nanopatterned soft hydrogels, particularly with randomly distributed patterns compared with regular soft hydrogels. Meanwhile, on stiff hydrogels featuring an aligned topography, optimal cellular mechanosensing is observed compared to random topography. Mechanistic investigations highlight that cellular force-sensing and adhesion are influenced by the interplay of pattern deformability and focal adhesion orientation, subsequently mediating stem cell differentiation. Our findings highlight the importance of combining substrate modulus and topography to guide cellular behavior in designing advanced tissue engineering biomaterials.
BACKGROUND: Bevacizumab serves as an effective treatment in cervical cancer patients with metastatic, recurrent, or advanced disease. However, gastrointestinal (GI)/genitourinary (GU) toxicities have been observed after bevacizumab treatment. Radiotherapy (RT) is the mainstay of treatment of cervical cancer. OBJECTIVES: To investigate the risk of GI/GU toxicities with bevacizumab plus RT compared with RT alone in cervical cancer patients. SEARCH STRATEGY: In this meta-analysis, PubMed, Embase, Web of Science, and Cochrane databases were searched from inception to September 25, 2022. SELECTION CRITERIA: Cohort studies evaluating the association between bevacizumab and GI/GU fistula or perforation in irradiated metastatic, recurrent, or advanced cervical cancer patients. DATA COLLECTION AND ANALYSIS: Results are expressed as odds ratios (OR) with 95% confidence intervals (CI). The inconsistency test (I2) was used to assess heterogeneity. Egger's regression test with a two-tailed P value was used to evaluate publication bias. MAIN RESULTS: Four cohort studies met the inclusion criteria with a total of 597 women included. There was a significant association between GI fistula/perforation and GU fistula/perforation in irradiated cervical cancer patients receiving bevacizumab (OR 4.03 [95% CI: 1.76-9.20] and OR 4.71 [95% CI: 1.51-14.70], respectively). CONCLUSIONS: The bevacizumab-containing regimen was associated with an increased risk of GI or GU toxicities in cervical cancer individuals undergoing pelvic RT. These results suggest the bevacizumab-associated benefits and risk should be better weighted to reach an optimal treatment strategy. Further investigation on optimal dosage and timing of bevacizumab and RT is vital to minimize the adverse events and maximize the benefits.
In pursuit of enhancing the mechanical properties, especially the tensile strength, of 4D-printable consumables derived from waste cooking oil (WCO), we initiated the production of acrylate-modified WCO, which encompasses epoxy waste oil methacrylate (EWOMA) and epoxy waste oil acrylate (EWOA). Subsequently, a series of WCO-based 4D-printable photocurable resins were obtained by introducing a suitable diacrylate molecule as the second monomer, coupled with a composite photoinitiator system comprising Irgacure 819 and p-dimethylaminobenzaldehyde (DMAB). These materials were amenable to molding using an LCD light-curing 3D printer. Our findings underscored the pivotal role of triethylene glycol dimethacrylate (TEGDMA) among the array of diacrylate molecules in enhancing the mechanical properties of WCO-based 4D-printable resins. Notably, the 4D-printable material, composed of EWOA and TEGDMA in an equal mass ratio, exhibited nice mechanical strength comparable to that of mainstream petroleum-based 4D-printable materials, boasting a tensile strength of 9.17 MPa and an elongation at break of 15.39%. These figures significantly outperformed the mechanical characteristics of pure EWOA or TEGDMA resins. Furthermore, the EWOA-TEGDMA resin demonstrated impressive thermally induced shape memory performance, enabling deformation and recovery at room temperature and retaining its shape at -60 °C. This resin also demonstrated favorable biodegradability, with an 8.34% weight loss after 45 days of soil degradation. As a result, this 4D-printable photocurable resin derived from WCO holds immense potential for the creation of a wide spectrum of high-performance intelligent devices, brackets, mold, folding structures, and personalized products.
Transparent polysiloxane elastomers with good self-healing and reprocessing abilities have attracted significant attention in the field of artificial skin and flexible displays. Herein, we propose a simple one-pot method to fabricate a room temperature self-healable polysiloxane elastomer (HPDMS) by introducing dynamic and reversible imine bonds and boroxine into polydimethylsiloxane (PDMS) networks. The presence of imine bonds and boroxine is proved by FT-IR and NMR spectra. The obtained HPDMS elastomer is highly transparent with a transmittance of up to 80%. The TGA results demonstrated that the HPDMS elastomer has good heat resistance and can be used in a wide temperature range. A lower glass transition temperature (Tg, -127.4 °C) was obtained and revealed that the elastomer is highly flexible at room temperature. Because of the reformation of dynamic reversible imine bonds and boroxine, the HPDMS elastomers exhibited excellent autonomous self-healing properties. After healing for 3 h, the self-healing efficiency of HPDMS reached 96.3% at room temperature. Moreover, the elastomers can be repeatedly reprocessed multiple times under milder conditions. This work provides a simple but effective method to prepare transparent self-healable and reprocessable polysiloxane elastomers.
Indistinguishable single photons in the telecom-bandwidth of optical fibers are indispensable for long-distance quantum communication. Solid-state single photon emitters have achieved excellent performance in key benchmarks, however, the demonstration of indistinguishability at room-temperature remains a major challenge. Here, we report room-temperature photon indistinguishability at telecom wavelengths from individual nanotube defects in a fiber-based microcavity operated in the regime of incoherent good cavity-coupling. The efficiency of the coupled system outperforms spectral or temporal filtering, and the photon indistinguishability is increased by more than two orders of magnitude compared to the free-space limit. Our results highlight a promising strategy to attain optimized non-classical light sources.
The regulation of circularly polarized luminescence (CPL) behavior is of great significance for practical applications. Herein, we deliberately designed three achiral pyrene derivatives (Py-1, Py-2, and Py-3) with different butoxy-phenyl substituents and the chiral binaphthyl-based inducer (R/S-B) with anchored dihedral angle to construct chiral co-assemblies, and explored their induced CPL behaviors. Interestingly, the resulting co-assemblies demonstrate tunable CPL emission behaviors caused by the structural symmetry effect of achiral pyrene-based emitters during the chiral co-assembly process. And in spin-coated films, the dissymmetry factor (gem) values were 9.1 × 10-3 for (R/S-B)1-(Py-1)10, 5.6 × 10-2 for (R/S-B)1-(Py-2)7, and 8.6 × 10-4 for (R/S-B)1-(Py-3)1, respectively. The strongest CPL emission (|gem| = 5.6 × 10-2, λem = 423 nm, QY = 34.8 %) was detected on (R/S-B)1-(Py-2)7 due to the formation of regular and ordered helical nanofibers through the strong π-π stacking interaction between the R/S-B and the achiral Py-2 emitter. The strategy presented here provides a creative approach for progressively regulating CPL emission behaviors in the chiral co-assembly process.
BACKGROUND: Frailty is recognized as a surrogate for physiological age and has been established as a valid and independent predictor of postoperative morbidity, mortality, and complications. ERAS can enhance surgical safety by minimizing stress responses in frail patients, enabling surgeons to discharge patients earlier. However, the question of whether and to what extent the frailty impacts the post-ERAS outcomes in older patients remains. MATERIALS AND METHODS: An evidence-based ERAS program was implemented in our center from January 2019. This is a prospective cohort study of patients aged ≥75 years who underwent open transforaminal lumbar interbody fusion (TLIF) for degenerative spine disease from April 2019 to October 2021. Frailty was assessed with the Fried frailty scale (FP scale), and patients were categorized as non/prefrail (FP 0-2) or frail (FP ≥ 3). The preoperative variables, operative data, postoperative outcomes and follow-up information were compared between the two groups. Univariate and multivariate logistic regression analyses were used to identify risk factors for 90-day major complications and prolonged length of hospital stay (LOS) after surgery. RESULTS: A total of 245 patients (age of 79.8 ± 3.4 yr) who had a preoperative FP score recorded and underwent scheduled TLIF surgery were included in the final analysis. Comparisons between non-frail and prefrail/frail patients revealed no significant difference in age, sex, and surgery-related variables. Even after adjusting for multiple comparisons, the association between Fried frailty and ADL-dependency, IADL-dependency, and malnutrition remained significant. Preoperative frailty was associated with increased rates of postoperative adverse events. A higher CCI grade was an independent predictor for 90-day major complications, while Fried frailty and MNA-SF scores <12 were predictive of poor postoperative recovery. CONCLUSION: Frail older patients had more adverse post-ERAS outcomes after TLIF compared to non/prefrail older patients. Continued research and multidisciplinary collaboration will be essential to refine and optimize protocols for surgical care in frail older adults.
In this study, the impact of soy hull polysaccharide (SHP) concentration on high-internal-phase emulsions (HIPEs) formation and the gastrointestinal viability of Lactobacillus plantarum within HIPEs were demonstrated. Following the addition of SHP, competitive adsorption with soy protein isolate (SPI) occurred, leading to increased protein adhesion to the oil-water interface and subsequent coating of oil droplets. This process augmented viscosity and enhanced HIPEs stability. Specifically, 1.8 % SHP had the best encapsulation efficiency and delivery efficiency, reaching 99.3 % and 71.1 %, respectively. After 14 d of continuous zebrafishs feeding, viable counts of Lactobacillus plantarum and complex probiotics in the intestinal tract was 1.1 × 107, 1.3 × 107, respectively. In vitro experiments further proved that HIPEs' ability to significantly enhance probiotics' intestinal colonization and provided targeted release for colon-specific delivery. These results provided a promising strategy for HIPEs-encapsulated probiotic delivery systems in oral food applications.
Emulsions , Lactobacillus plantarum , Polysaccharides , Probiotics , Soybean Proteins , Zebrafish , Soybean Proteins/chemistry , Animals , Polysaccharides/chemistry , Lactobacillus plantarum/metabolism , Glycine max/chemistry , Viscosity
OBJECTIVES: To investigate the feasibility of synthetic MRI (syMRI), diffusion-weighted imaging (DWI) and their combination with morphological features for differentiating nasopharyngeal lymphoma (NPL) from nasopharyngeal carcinoma (NPC). METHODS: Sixty-nine patients with nasopharyngeal tumors (NPL, n = 22; NPC, n = 47) who underwent syMRI and DWI were retrospectively enrolled between October 2020 and May 2022. syMRI and DWI quantitative parameters (T1, T2, PD, ADC), and morphological features were obtained. Diagnostic performance was assessed by independent sample t-test, chi-square test, logistic regression analysis, receiver operating characteristic curve (ROC), and DeLong test. RESULTS: NPL has significantly lower T2, PD, and ADC values compared to NPC (all P < 0.05), whereas no significant difference was found in T1 value between these two entities (P > 0.05). The morphological features of tumor type, skull-base involvement, Waldeyer ring involvement, and lymph nodes involvement region were significantly different between NPL and NPC (all P < 0.05). The syMRI (T2+PD) model has better diagnostic efficacy, with AUC, sensitivity, specificity, and accuracy of 0.875, 77.27%, 89.36%, and 85.51%. Compared with syMRI model, syMRI+Morph (PD+Waldeyer ring involvement+lymph nodes involvement region), syMRI+DWI (T2+PD+ADC), and syMRI+DWI+Morph (PD+ADC+skull base involvement+Waldeyer ring involvement) models can further improve the diagnostic efficiency (all P < 0.05). Furthermore, syMRI+DWI+Morph model has excellent diagnostic performance, with AUC, sensitivity, specificity, and accuracy of 0.986, 95.47%, 97.87%, and 97.10%, respectively. CONCLUSION: syMRI and DWI quantitative parameters were helpful in discriminating NPL from NPC. syMRI+DWI+Morph model has the excellent diagnostic efficiency in differentiating these two entities. ADVANCES IN KNOWLEDGE: syMRI+DWI+morphological feature method can differentiate NPL from NPC with excellent diagnostic performance.
A new peptide-based fluorescent probe named DMDH with easy-to-synthesize, excellent stability, good water solubility and large Stokes shift (225 nm) was synthesized for highly selective sequential detections of copper ions (Cu2+) and glyphosate (Glyp). DMDH demonstrated great detection performance towards Cu2+via strong fluorescence quenching, and forming non-fluorescence DMDH-Cu2+ ensemble. As a new promising cascade probe, the fluorescence of DMDH-Cu2+ ensemble was significantly recovered based on displacement approach after glyphosate was added. Interestingly, the limit of detections (LODs) for Cu2+ and glyphosate were 40.6 nM and 10.6 nM, respectively, which were far lower than those recommended by the WHO guidelines for drinking water. More importantly, DMDH was utilized to evaluate Cu2+ and glyphosate content in three real water samples, demonstrating that its effectiveness in water quality monitoring. Additionally, it is worth noting that DMDH was also applied to analyze Cu2+ and glyphosate in living cells in view of significant cells permeability and low cytotoxicity. Moreover, DMDH soaked in filter paper was used to create qualitative test strips and visually identify Cu2+ and glyphosate through significant color changes. Furthermore, smartphone RGB color recognition provided a new method for semi-quantitative testing of Cu2+ and glyphosate in the absence of expensive instruments.
Low-valent transition-metal diazenido species are important intermediates in transition-metal-mediated dinitrogen reduction reactions. Isolable complexes of the type unanimously feature closed-shell diazenido ligands. Those bearing open-shell diazenido ligands have remained elusive. Herein, we report the synthesis, characterization, and reactivity of a d7 iron(I) complex featuring an open-shell silyldiazenido ligand, [(ICy)Fe(NNSiiPr3)(η2:η2-dvtms)] (1, ICy = 1,3-dicyclohexylimidazole-2-ylidene, dvtms = divinyltetramethyldisiloxane). Complex 1 is prepared in good yield by silylation of the iron(-I)-N2 complex [K(18-crown-6)][(ICy)Fe(N2)(η2:η2-dvtms)] with iPr3SiOTf and has been fully characterized by various spectroscopic methods. Theoretical studies, in combination with characterization data, established an S = 1/2 ground spin-state for 1 that can best be described as a quartet iron(I) center featuring an antiferromagnetically coupled triplet silyldiazenido ligand. The diazenido and alkene ligands in 1 are labile, as indicated by the facile disproportionation reaction of 1 at ambient temperature to transform into the iron(II) bis(diazenido) species [(ICy)(NNSiiPr3)2Fe(dvtms)Fe(NNSiiPr3)2(ICy)] (2) and the iron(0) species [(ICy)Fe(η2:η2-dvtms)] and also the alkene-exchange reaction of 1 with PhCHâCHBC8H14 to form [(ICy)Fe(NNSiiPr3)(η2-trans-PhCHâCHBC8H14)] (3). Complex 1 is light-sensitive. Upon photolysis, it undergoes a SiiPr3 radical-transfer reaction to yield [(ICy)Fe(σ:η2-MeCHSiMe2OSiMe2CHâCHSiiPr3)] (4) and N2. The reactions of 1 with the trityl radical and organic bromides yield iron(II) complexes, which indicates its reducing nature. Moreover, 1 is a weak hydrogen-atom abstractor, as indicated by its inertness toward HSi(SiMe3)3 and cyclohexa-1,4-diene and the low calculated N-H bond dissociation energy (48 kcal/mol) of its corresponding iron(II) iso-hydrazenido species.
