Improved Efficiency in WSe2 Solar Cells Using Amorphous InOx Heterocontacts.

van der Waals (vdW) layered materials have been shown to have excellent optoelectronic properties relevant to photovoltaics. Despite their promise, the demonstrated efficiencies of vdW material solar cells remain low and are seldom supported by statistics or spectral quantum efficiency analysis. In this study, we utilize a p-type WSe2 absorber, forming a solar cell with a transparent front InOx electron contact, and a rear Pd reflector/hole contact. We fabricate multiple devices providing statistics for 10 devices with an average 1 sun conversion efficiency above 5%, among which a champion efficiency of 6.37% is achieved. This is the highest AM 1.5G 1 sun efficiency reported for a vdW material solar cell, with a current density supported by external quantum efficiency analysis. This cell is also shown to have near unity quantum efficiency around λ = 600 nm. This work provides support to vdW materials being considered as serious candidates for future thin-film solar cells.

Isomer engineering for deep understanding of aggregation-induced photothermal enhancement in conjugated systems.

Organic photothermal materials based on conjugated structures have significant potential applications in areas such as biomedical diagnosis, therapy, and energy conversion. Improving their photothermal conversion efficiency through molecular design is critical to promote their practical applications. Especially in similar structures, understanding how the position of heteroatoms affects the conversion efficiency is highly desirable. Herein, we prepared two isomeric small D-A molecules with different sulfur atom positions (TBP-MPA and i-TBP-MPA), which display strong and broad absorption in the UV-visible region due to their strong intramolecular charge transfer characteristics. Compared to i-TBP-MPA, TBP-MPA demonstrates aggregation-induced photothermal enhancement (AIPE). Under simulated sunlight (1 kW m-2) irradiation, the stable temperature of TBP-MPA powder reached 60 °C, significantly higher than the 50 °C achieved by i-TBP-MPA. Experimental and theoretical results indicate that the S⋯N non-covalent interactions in TBP-MPA impart a more rigid conjugated framework to the molecule, inducing ordered molecular stacking during aggregation. This ordered stacking provides additional non-radiative transition channels between TBP-MPA molecules, enhancing their photothermal performance in the aggregated state. Under 1 sun irradiation, TBP-MPA achieved a water evaporation rate of 1.0 kg m-2 h-1, surpassing i-TBP-MPA's rate of 0.92 kg m-2 h-1.

Scalable Fabrication of Black Phosphorous Films for Infrared Photodetector Arrays.

Bulk black phosphorous (bP) exhibits excellent infrared (IR) optoelectronic properties, but most reported bP IR photodetectors are fabricated from single exfoliated flakes with lateral sizes of < 100 µm. Here, scalable thin films of bP suitable for IR photodetector arrays are realized through a tailored solution-deposition method. The properties of the bP film and their protective capping layers are optimized to fabricate bP IR photoconductors exhibiting specific detectivities up to 4.0 × 108 cm Hz1/2 W-1 with fast 30/60 µs rise/fall times under λ = 2.2 µm illumination. The scalability of the bP thin film fabrication is demonstrated by fabricating a linear array of 25 bP photodetectors and obtaining 25 × 25 pixel IR images at ≈203 ppi with good spatial fidelity. This research demonstrates a commercially viable method of fabricating scalable bP thin films for optoelectronic devices including room temperature-operable IR photodetector arrays.

Room Temperature Bias-Selectable, Dual-Band Infrared Detectors Based on Lead Sulfide Colloidal Quantum Dots and Black Phosphorus.

A single photodetector capable of switching its peak spectral photoresponse between two wavelength bands is highly useful, particularly for the infrared (IR) bands in applications such as remote sensing, object identification, and chemical sensing. Technologies exist for achieving dual-band IR detection with bulk III-V and II-VI materials, but the high cost and complexity as well as the necessity for active cooling associated with some of these technologies preclude their widespread adoption. In this study, we leverage the advantages of low-dimensional materials to demonstrate a bias-selectable dual-band IR detector that operates at room temperature by using lead sulfide colloidal quantum dots and black phosphorus nanosheets. By switching between zero and forward bias, these detectors switch peak photosensitive ranges between the mid- and short-wave IR bands with room temperature detectivities of 5 × 109 and 1.6 × 1011 cm Hz1/2 W-1, respectively. To the best of our knowledge, these are the highest reported room temperature values for low-dimensional material dual-band IR detectors to date. Unlike conventional bias-selectable detectors, which utilize a set of back-to-back photodiodes, we demonstrate that under zero/forward bias conditions the device's operation mode instead changes between a photodiode and a phototransistor, allowing additional functionalities that the conventional structure cannot provide.

Structural Engineering of Red Luminogens to Realize High Emission Efficiency through ACQ-to-AIE Transformation.

Deep red/near-infrared (NIR, >650 nm) emissive organic luminophores with aggregation-induced emission (AIE) behaviours have emerged as promising candidates for applications in optoelectronic devices and biological fields. However, the molecular design philosophy for AIE luminogens (AIEgens) with narrow band gaps are rarely explored. Herein, we rationally designed two red organic luminophores, FITPA and FIMPA, by considering the enlargement of transition dipole moment in the charge-transfer state and the transformation from aggregation-caused quenching (ACQ) to AIE. The transition dipole moments were effectively enhanced with a "V-shaped" molecular configuration. Meanwhile, the ACQ-to-AIE transformation from FITPA to FIMPA was induced by a methoxy-substitution strategy. The experimental and theoretical results demonstrated that the ACQ-to-AIE transformation originated from a crystallization-induced emission (CIE) effect because of additional weak interactions in the aggregate state introduced by methoxy groups. Owing to the enhanced transition dipole moment and AIE behaviour, FIMPA presented intense luminescence covering the red-to-NIR region, with a photoluminescence quantum yield (PLQY) of up to 38 % in solid state. The promising cell-imaging performance further verified the great potential of FIMPA in biological applications. These results provide a guideline for the development of red and NIR AIEgens through comprehensive consideration of both the effect of molecular structure and molecular interactions in aggregate states.

The impact of carbon emission reduction inputs of power generation enterprises on the cost of equity capital.

This paper aims to encourage power generation enterprises to actively carry out emission reduction activities by studying the impact of carbon emission reduction investment on long-term development. The existing literature mainly studies the interaction between national economic development and energy consumption at the macro level, and the impact of environmental protection investment by enterprises at the micro level on the short- and long-term economic consequences. However, there is still a large space for research on how specific emission reduction measures lead the long-term development of enterprises. Therefore, this paper chooses to introduce enterprise competitiveness, government subsidy, and management shareholding ratio respectively to conduct intermediary test and grouping regression, and empirically studies the mechanism of carbon emission reduction input of Chinese power generation enterprises on the cost of equity capital from 2013 to 2020. The results show that management shareholding can enhance the initiative of enterprises to reduce emissions. At the same time, carbon emission reduction investment can effectively reduce the cost of equity capital by improving the competitiveness of enterprises and forming a reputation mechanism faster. This study reveals the significance of carbon emission reduction investment as an important part of enterprise environmental protection investment, and emphasizes that the government and enterprises can effectively avoid the short-sighted tendency of enterprises and improve the long-term development power of enterprises by adjusting government subsidies, management shareholding ratio and other policies.

Random forest classifier improving phenylketonuria screening performance in two Chinese populations.

Phenylketonuria (PKU) is a genetic disorder with amino acid metabolic defect, which does great harms to the development of newborns and children. Early diagnosis and treatment can effectively prevent the disease progression. Here we developed a PKU screening model using random forest classifier (RFC) to improve PKU screening performance with excellent sensitivity, false positive rate (FPR) and positive predictive value (PPV) in all the validation dataset and two testing Chinese populations. RFC represented outstanding advantages comparing several different classification models based on machine learning and the traditional logistic regression model. RFC is promising to be applied to neonatal PKU screening.

Characterization and Mechanistic Study of Heavy Metal Adsorption by Facile Synthesized Magnetic Xanthate-Modified Chitosan/Polyacrylic Acid Hydrogels.

A simple method was used to synthesize magnetic xanthate-modified chitosan/polyacrylic acid hydrogels that were used to remove heavy metal ions from an aqueous solution. Xanthate modification of chitosan significantly improved adsorption performance: individual adsorption capacities of the hydrogel for Cu(II), Cd(II), Pb(II), and Co(II) ions were 206, 178, 168, and 140 mg g-1, respectively. The magnetic hydrogels had good regeneration ability and were effectively separated from the solution by use of a magnet. Adsorption kinetic data showed that the removal mechanism of heavy metal ions from the solution by magnetic hydrogels occurs mainly by chemical adsorption. The equilibrium adsorption isotherms were well-described by the Freundlich and Langmuir equations. Positive values were found for the Gibbs standard free energy and enthalpy, indicating an increase in the disorder at the solid-liquid interface during adsorption. Magnetic xanthate-modified chitosan-based hydrogels that exhibit high adsorption efficiency, regeneration, and easy separation from a solution have broad development prospects in various industrial sewage and wastewater treatment fields.

Three Variants Affecting Exon 1 of Ectodysplasin A Cause X-Linked Hypohidrotic Ectodermal Dysplasia: Clinical and Molecular Characteristics.

Background: Ectodysplasin A (EDA) variations are major pathogenic factors for hypohidrotic ectodermal dysplasia (HED), the most common form of ectodermal dysplasia (ED), characterized by hypotrichosis, hypohidrosis, hypodontia, and other oral features. Methods: Molecular genetic defects in three HED families were detected by whole-exome sequencing and confirmed by Sanger sequencing or multiplex ligation-dependent probe amplification. The effect of splicing variant was further verified by EDA minigene in vitro analysis. De novo deletion was confirmed by chromosomal microarray analysis. Results: Three variants (c.396 + 1 G > C, c.171-173 del GTT, and exon 1 deletion) were identified, all affecting exon 1 of the EDA gene. Variants c.396 + 1 G > C and c.171-173 del GTT were first identified. Minigene analysis of the splicing variant (c.396 + 1 G > C) displayed a prolonged EDA-A1 transcript containing extra 699 bp at the start of intron 1, representing a functional cryptic splice site formation in vitro. Combining the results of chromosomal microarray analysis and whole-exome sequencing, the deletion variant was over 87 kb. Three variants were predicted to affect protein function to differing degrees, and were responsible for X-linked HED with varying phenotype. Conclusion: Investigating the clinical and molecular characteristics of these variations broadens our understanding of EDA gene variants, supporting clinical diagnosis, genetic counseling, and prenatal diagnosis of HED.

Apoptosis and autophagy coordinately shape vector tolerance to arbovirus infection.

ABBREVIATIONS: CP: coat protein; MAPK: mitogen-activated protein kinase; PEBP: phosphatidylethanolamine binding protein; TYLCV: tomato yellow leaf curl virus.

Xanthate-Modified Magnetic Fe3O4@SiO2-Based Polyvinyl Alcohol/Chitosan Composite Material for Efficient Removal of Heavy Metal Ions from Water.

Chitosan has several shortcomings that limit its practical application for the adsorption of heavy metals: mechanical instability, a challenging separation and recovery process, and low equilibrium capacity. This study describes the synthesis of a magnetic xanthate-modified polyvinyl alcohol and chitosan composite (XMPC) for the efficient removal and recovery of heavy metal ions from aqueous solutions. The XMPC was synthesized from polyvinyl alcohol, chitosan, and magnetic Fe3O4@SiO2 nanoparticles. The XMPC was characterized, and its adsorption performance in removing heavy metal ions was studied under different experimental conditions. The adsorption kinetics fit a pseudo-second-order kinetic model well. This showed that the adsorption of heavy metal ions by the XMPC is a chemical adsorption and is affected by intra-particle diffusion. The equilibrium adsorption isotherm was well described by the Langmuir and Freundlich equations. The XMPC reached adsorption equilibrium at 303 K after approximately 120 min, and the removal rate of Cd(II) ions was 307 mg/g. The composite material can be reused many times and is easily magnetically separated from the solution. This makes the XMPC a promising candidate for widespread application in sewage treatment systems for the removal of heavy metals.

PEBP balances apoptosis and autophagy in whitefly upon arbovirus infection.

Apoptosis and autophagy are two common forms of programmed cell death (PCD) used by host organisms to fight against virus infection. PCD in arthropod vectors can be manipulated by arboviruses, leading to arbovirus-vector coexistence, although the underlying mechanism is largely unknown. In this study, we find that coat protein (CP) of an insect-borne plant virus TYLCV directly interacts with a phosphatidylethanolamine-binding protein (PEBP) in its vector whitefly to downregulate MAPK signaling cascade. As a result, apoptosis is activated in the whitefly increasing viral load. Simultaneously, the PEBP4-CP interaction releases ATG8, a hallmark of autophagy initiation, which reduces arbovirus levels. Furthermore, apoptosis-promoted virus amplification is prevented by agonist-induced autophagy, whereas the autophagy-suppressed virus load is unaffected by manipulating apoptosis, suggesting that the viral load is predominantly determined by autophagy rather than by apoptosis. Our results demonstrate that a mild intracellular immune response including balanced apoptosis and autophagy might facilitate arbovirus preservation within its whitefly insect vector.

Facile Azabenz-Annulations through UV-induced Photocyclization: A Promising Method for Perylenediimide-Based Organic Semiconductors.

The derivatization of perylenediimides (PDIs) by bay decoration is essential for the development of PDI-based semiconductors owing to their excellent photoelectric properties. Herein, four bis-azabenz-annulated PDIs (bis-AzaBPDIs) are concisely synthesized in high yields through ultraviolet-induced photocyclization, where the reaction processes including aldimine condensation, cyclization, and oxidative re-aromatization are investigated. The optical characterizations and theoretical simulation reveal that the unique properties of the four bis-AzaBPDIs are comparable to their parent PDI. Organic field effect transistors with compounds 2, 3, or 4 as active layers indicated that all compounds showed unipolar electron transport properties with the mobilities of 1.1×10-3 , 5.8×10-4 , and 8.5×10-6  cm2  V-1 s-1 , respectively. These results suggest the great potential of bis-AzaBPDIs as organic semiconductors. The easy preparation approach reported in this work would renew research interest in developing bis-AzaBPDI-based optoelectronic molecules.

Visible to Short-Wave Infrared Photodetectors Based on ZrGeTe4 van der Waals Materials.

The self-terminated, layered structure of van der Waals materials introduces fundamental advantages for infrared (IR) optoelectronic devices. These are mainly associated with the potential for low noise while maintaining high internal quantum efficiency when reducing IR absorber thicknesses. In this study, we introduce a new van der Waals material candidate, zirconium germanium telluride (ZrGeTe4), to a growing family of promising IR van der Waals materials. We find the bulk form ZrGeTe4 has an indirect band edge around ∼0.5 eV, in close agreement with previous theoretical predictions. This material is found to be stable up to 140 °C and shows minimal compositional variation even after >30 days storage in humid air. We demonstrate simple proof-of-concept broad spectrum photodetectors with responsivities above 0.1 AW-1 across both the visible and short-wave infrared wavelengths. This corresponds to a specific detectivity of ∼109 cm Hz1/2 W-1 at λ = 1.4 µm at room temperature. These devices show a linear photoresponse vs illumination intensity relationship over ∼4 orders of magnitude, and fast rise/fall times of ∼50 ns, also verified by a 3 dB roll-off frequency of 5.9 MHz. As the first demonstration of photodetection using ZrGeTe4, these characteristics measured on a simple proof-of-concept device show the exciting potential of the ZrGeTe4 for room temperature IR optoelectronic applications.

Solvothermal Synthesis of Multiple Dihydropyrimidinones at a Time as Inhibitors of Eg5.

Solvothermal synthesis of multiple dihydropyrimidinones at a time has been developed in inexpensive and green bio-based solvent lactic acid without any additional catalysts or additives. By this method, thirty new dihydropyrimidinone derivatives were synthesized in two batches and characterized. All of the compounds were screened by Eg5 motor protein ATPase assay, and the positive compounds were tested against the Caco-2 cell line, HeLa cell line, L929 cell line and T24 cell line in vitro. Among them, compound C9 exhibited the best inhibitory activity against motor protein ATPase with an IC50 value of 30.25 µM and significant cytotoxic activity in the micromolar range against the cells above. The Lineweaver-Burk plot revealed that compound C9 was a mixed-type Eg5 inhibitor. A molecular modeling study using the Discovery Studio program was performed, where compound C9 exhibited good binding interaction with Eg5 motor protein ATPase, and this was consistent with the attained experimental results.

HIV testing behaviors and willingness to receive oral rapid HIV testing among dental patients in Xi'an, China.

INTRODUCTION: HIV testing is an important strategy for controlling and ultimately ending the global pandemic. Oral rapid HIV testing (ORHT) is an evidence-based strategy and the evidence-based shows is favored over traditional blood tests in many key populations. The dental setting has been found to be a trusted, convenient, and yet untapped venue to conduct ORHT. This study assessed the HIV testing behaviors and willingness to receive ORHT among dental patients in Xi'an, China. METHODS: A cross-sectional survey of dental patients from Xi'an was conducted from August to September 2017. Dental patients were recruited using a stratified cluster sampling. A 44-item survey was used to measure HIV/AIDS knowledge, HIV testing behaviors, and willingness to receive ORHT. RESULTS: Nine hundred and nine dental patients completed the survey with a mean HIV/AIDS knowledge score of 10.7/15 (SD 2.8). Eighty-four participants (9.2%) had previously received an HIV test. Participants would have a high rate of HIV testing if they had higher monthly income (OR = 1.982, 95% CI: 1.251-3.140) and a higher HIV/AIDS knowledge score (OR = 1.137, 95% CI: 1.032-1.252). Five hundred and eighty-two participants (64.0%) were willing to receive ORHT before a dental treatment, 198 (21.8%) were not sure, and 129 (14.2%) were unwilling. Logistic regression showed that age (OR = 0.970, 95% CI: 0.959-0.982), HIV/AIDS knowledge score (OR = 1.087, 95% CI: 1.031-1.145), previous HIV test (OR = 2.057, 95% CI: 1.136-3.723), having advanced HIV testing knowledge (OR = 1.570, 95% CI: 1.158-2.128), and having advanced ORHT knowledge (OR = 2.074, 95%: CI 1.469-2.928) were the factors affecting the willingness to receive ORHT. CONCLUSIONS: The majority of dental patients had not previously received an HIV test, although many were receptive to being tested in the dental setting. The dental setting as a venue to screen people for HIV needs further exploration, particularly because many people do not associate dentistry with chairside screenings. Increasing awareness of ORHT and reducing testing price can further improve the patient's willingness to receive ORHT.

Apoptotic neurodegeneration in whitefly promotes the spread of TYLCV.

The mechanism by which plant viruses manipulate the behavior of insect vectors has largely been described as indirect manipulation through modifications of the host plant. However, little is known about the direct interaction of the plant virus on the nervous system of its insect vector, and the substantial behavioral effect on virus transmission. Using a system consisting of a Tomato yellow leaf curl virus (TYLCV) and its insect vector whitefly, we found that TYLCV caused caspase-dependent apoptotic neurodegeneration with severe vacuolar neuropathological lesions in the brain of viruliferous whitefly by inducing a putative inflammatory signaling cascade of innate immunity. The sensory defects caused by neurodegeneration removed the steady preference of whitefly for virus-infected plants, thereby enhancing the probability of the virus to enter uninfected hosts, and eventually benefit TYLCV spread among the plant community. These findings provide a neuromechanism for virus transmission to modify its associated insect vector behavior.

When a plant becomes infected by a virus, its defenses get weakened, which attracts insects that are looking for an easy meal. Insects detect which plants are infected based on the color of the sickened plant and the smell of chemicals it releases. Once an insect leaves the infected plant, it may carry the virus to new plants, allowing the virus to spread. Insects, however, prefer the easy pickings of plants that are already infected, making them less likely to spread the virus. Plant viruses have found ways to overcome this preference, but how they do this was not fully understood. Learning more about how plant viruses manipulate insects into helping them spread could allow scientists to develop new ways of protecting food crops from viral diseases. Viruses that infect insects can trigger excessive immune system responses that damage insects' nerves and cause them to behave differently. For example, their senses may become impaired, they may move less, or be less able to remember things. This has led scientists to wonder whether plant viruses that use insects to spread might manipulate the insects' behaviors using a similar mechanism. Now, Wang et al. have investigated whether the tomato yellow leaf curl virus ­TYLCV for short ­ changes the behavior of whiteflies, which are known to spread the virus. The experiments showed that whiteflies typically prefer tomato plants infected with the virus, but after carrying TYLCV, they displayed equal preference for both infected and uninfected plants. Analyzing which genes were active in the whiteflies revealed that TYLCV triggers a harmful immune response which turns on genes that cause cells in the brain to die. This impairs the whiteflies' sight and sense of smell, making it harder for them to distinguish between infected and uninfected plants. These findings suggest that the immune response triggered by the virus may be essential for the spread of TYLCV. It also identified a protein that causes the death of brain cells, leading to behavioral changes in the whiteflies. This suggests that targeting this protein, or other steps in this process, could help stop the spread of TYLCV in tomato plants.

An aggregation-induced emission luminogen combined with a cyanoacrylate fuming method for latent fingerprint analysis.

Fingerprints remain topologically unchanged in one's whole life, and therefore, have been used as a means to biometrically identify individuals in forensic investigations, law enforcement and access control. Appropriate methods are essential to obtain high-quality fingerprint images. In this contribution, an aggregation-induced emission luminogen tetraphenylethene-based dye FLA-2 was synthesized and characterized for the visualization of latent fingerprints (LFPs). LFPs can be directly visualized by incubating with the dye FLA-2 solution. And, after a cyanoacrylate fuming method pre-treatment stage, fine fingerprint structures can be obtained from level-1 to level-3 details. Two methods were compared using resolution, fluorescence intensity, and scanning electron microscopy imaging to investigate the influence of the cyanoacrylate fuming method pre-treatment stage. Furthermore, the visualization of old LFPs (7 d, 16 d and 30 d) on glass slides, aluminum foil and coin substrates also became effective after the pre-treatment step. The fluorescent LFP images mentioned above were all validated by using an automated fingerprint identification system obtaining positive matches. These results demonstrate the potential of this method to be applied to visualizing LFPs in the field of public security.

Engineering the Chloroplast Genome of Oleaginous Marine Microalga Nannochloropsis oceanica.

Plastid engineering offers an important tool to fill the gap between the technical and the enormous potential of microalgal photosynthetic cell factory. However, to date, few reports on plastid engineering in industrial microalgae have been documented. This is largely due to the small cell sizes and complex cell-wall structures which make these species intractable to current plastid transformation methods (i.e., biolistic transformation and polyethylene glycol-mediated transformation). Here, employing the industrial oleaginous microalga Nannochloropsis oceanica as a model, an electroporation-mediated chloroplast transformation approach was established. Fluorescent microscopy and laser confocal scanning microscopy confirmed the expression of the green fluorescence protein, driven by the endogenous plastid promoter and terminator. Zeocin-resistance selection led to an acquisition of homoplasmic strains of which a stable and site-specific recombination within the chloroplast genome was revealed by sequencing and DNA gel blotting. This demonstration of electroporation-mediated chloroplast transformation opens many doors for plastid genome editing in industrial microalgae, particularly species of which the chloroplasts are recalcitrant to chemical and microparticle bombardment transformation.

Lactic acid as an invaluable green solvent for ultrasound-assisted scalable synthesis of pyrrole derivatives.

Lactic acid has been used as a bio-based green solvent to study the ultrasound-assisted scale-up synthesis. We report here, for the first time, on the novel and scalable process for synthesis of pyrrole derivatives in lactic acid solvent under ultrasonic radiation. Eighteen pyrrole derivatives have been synthesized in lactic acid solvent under ultrasonic radiation and characterized by (1)H NMR, IR, ESI MS. The results show, under ultrasonic radiation, lactic acid solvent can overcome the scale-up challenges and exhibited many advantages, such as bio-based origin, shorter reaction time, lower volatility, higher yields, and ease of isolating the products.