High-efficient separation of deoxyribonucleic acid from pathogenic bacteria by hedgehog-inspired magnetic nanoparticles microextraction.

Efficient separation of deoxyribonucleic acid (DNA) through magnetic nanoparticles (MN) is a widely used biotechnology. Hedgehog-inspired MNs (HMN) possess a high-surface-area due to the distinct burr-like structure of hedgehog, but there is no report about the usage of HMN for DNA extraction. Herein, to improve the selection of MN and illustrate the performance of HMN for DNA separation, HMN and silica-coated Fe3O4 nanoparticles (Fe3O4@SiO2) were fabricated and compared for the high-efficient separation of pathogenic bacteria of DNA. Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) are typical Gram-negative and Gram-positive bacteria and are selected as model pathogenic bacteria. To enhance the extraction efficiency of two kinds of MNs, various parameters, including pretreatment, lysis, binding and elution conditions, have been optimized in detail. In most separation experiments, the DNA yield of HMN was higher than that of Fe3O4@SiO2. Therefore, a HMN-based magnetic solid-phase microextraction (MSPE) and quantitative real-time PCR (qPCR) were integrated and used to detect pathogenic bacteria in real samples. Interestingly, the HMN-based MSPE combined qPCR strategy exhibited high sensitivity with a limit of detection of 2.0 × 101 CFU mL-1 for E. coli and 4.0 × 101 CFU mL-1 for S. aureus in orange juice, and 2.8 × 102 CFU mL-1 for E. coli and 1.1 × 102 CFU mL-1 for S. aureus in milk, respectively. The performance of the proposed strategy was significantly better than that of commercial kit. This work could prove that the novel HMN could be applicable for the efficient separation of DNA from complex biological samples.

Synthesis of micron-sized magnetic agarose beads chelated with nickel ions towards the affinity-based separation of histidine-tagged/rich proteins.

Developing high-performance magnetic particles for the effective separation and purification of target proteins has become an important topic in the area of biomedical research. In this work, a simple and novel strategy was proposed for fabricating magnetic Fe3O4@agarose-iminodiacetic acid-Ni microspheres (MAIN), which can efficiently and selectively isolate histidine-tagged/rich proteins (His-proteins). Based on the thermoreversible sol-gel transition of agarose, basic magnetic agarose microspheres were prepared through the inverse emulsion method, in which the emulsion contained agarose and amine-modified Fe3O4 nanoparticles. The size of the emulsion was controlled by the emulsification of a high-speed shear machine, which improved the specific surface area of MAIN. Subsequently, the amine-modified Fe3O4 nanoparticles were covalently crosslinked with agarose through epichlorohydrin, which could avoid leakage of the magnetic source during use and increase the stability of MAIN. The microsized MAIN exhibited a clearly visible spherical core-shell structure with a diameter range from 3.4 µm to 9.8 µm, and excellent suspension ability in aqueous solution. The maximum adsorption capacity of MAIN for histidine-rich bovine hemoglobin was 1069.2 mg g-1 at 35 °C, which was higher than those of commercialized and most reported magnetic agarose microspheres/nanoparticles. The MAIN showed excellent adsorption ability and selectivity toward His-proteins in a mixture of histidine-rich bovine serum albumin (BSA) and histidine-poor lysozyme (LYZ). When the amount of LYZ was 5-fold higher than that of BSA, the recovery of BSA reached 75.0%. To prove its practicability, MAIN was successfully employed for the enrichment of histidine-tagged RSV-F0 from the cell culture medium supernatant. According to the optimized conditions, MAIN could enrich approximately 0.1 mg of RSV-F0 from 1 mL of complex biological sample. Therefore, we believe that the novel MAIN could be applicable for efficient separation and purification of His-proteins from complex biological systems.

Anastomotic leak risk factors following colon cancer resection: a systematic review and meta-analysis.

BACKGROUND: Despite improved surgical techniques, anastomotic leakage is still a serious complication that can occur after colon cancer resection, resulting in increased morbidity and mortality. The aim of this study was to evaluate the risk factors for anastomotic leakage after colon cancer surgery, provide a theoretical basis for reducing its occurrence, and guide the practice of clinicians. METHODS: A systematic review of PubMed, Ovid, Web of Science and Cochrane Central Register of Controlled Trials databases was conducted by using a combination of subject terms and free words for online searches. The databases were searched from their inception to 31 March 2022, and all cross-sectional, cohort or case‒control studies examining the risk factors for the development of anastomotic fistula after surgery for colon cancer were identified. RESULT: A total of 2133 articles were searched for this study, and 16 publications were ultimately included, all of which were cohort studies. A total of 115,462 subjects were included, and a total of 3959 cases of anastomotic leakage occurred postoperatively, with an incidence of 3.4%. The odds ratio (OR) and 95% confidence interval (CI) were used for evaluation. Male sex (OR = 1.37, 95% CI: 1.29-1.46, P < 0.00001), BMI (OR = 1.04, 95% CI: 1.00-1.08, P = 0.03), diabetes (OR = 2.80, 95% CI: 1.81-4.33, P < 0.00001), combined lung disease (OR = 1.28, 95% CI: 1.15-1.42, P < 0.00001), anaesthesia ASA score (OR = 1.35, 95% CI: 1.24-1.46, P < 0.00001), ASA class ≥ III (OR = 1.34, 95% CI: 1.22-1.47, P < 0.00001), emergency surgery (OR = 1.31, 95% CI: 1.11-1.55, P = 0.001), open surgery (OR = 1.94, 95% CI: 1.69-2.24, P < 0.00001) and type of surgical resection (OR = 1.34, 95% CI: 1.12-1.61, P = 0.002) are risk factors for anastomotic leakage after colon cancer surgery. There is still a lack of strong evidence on whether age (OR = 1.00, 95% CI: 0.99-1.01, P = 0.36) and cardiovascular disease (OR = 1.18, 95% CI: 0.94-1.47, P = 0.16) are factors influencing the occurrence of anastomotic leakage after colon cancer surgery. CONCLUSIONS: Male sex, BMI, obesity, coexisting pulmonary disease, anaesthesia ASA score, emergency surgery, open surgery and type of resection were risk factors for anastomotic leakage after colon cancer surgery. The effect of age and cardiovascular disease on postoperative anastomotic leakage in patients with colon cancer needs further study.

Functionalized pyrite nanozyme probe and imprinted polymer modified with hydrophilic layer for rapid colorimetric analysis of glycoprotein in serum.

The biological molecules used in the sandwich detection method have problems such as complex extraction processes, high costs, and uneven quality. Therefore we integrated glycoprotein molecularly controllable-oriented surface imprinted magnetic nanoparticles (GMC-OSIMN) and boric acid functionalized pyrite nanozyme probe (BPNP) to replace the traditional antibody and horseradish peroxidase for sensitive detection of glycoproteins through sandwich detection. In this work, a novel nanozyme functionalized with boric acid was used to label glycoproteins that were captured by GMC-OSIMN. The substrate in the working solution catalyzed by the nanozyme labeled on the protein underwent visible color changes to the naked eye, and the generated signal can be quantitatively detected by a spectrophotometer, and the best color development conditions of the novel nanozyme under the influence of many factors were determined through multi-dimensional investigation. The optimum conditions of sandwich are optimized with ovalbumin (OVA), and it was extended to the detection of transferrin (TRF) and alkaline phosphatase (ALP) in the application. The detection range for TRF was 2.0 × 10-1-1.0 × 104 ng mL-1 with a detection limit of 1.32 × 10-1 ng mL-1, The detection range for ALP was 2.0 × 10-3-1.0 × 102 U L-1 with the detection limit of 1.76 × 10-3 U L-1. This method was subsequently used to detect TRF and ALP levels in 16 liver cancer patients, and the standard deviation of the test results of each patient was less than 5.7%.

Bioconjugation of nanozyme and natural enzyme to enable a one-step cascade reaction for the detection of metabolites.

Nanozyme, with enzyme-mimicking activity and excellent stability, has attracted extensive attention. However, some inherent disadvantages, including poor dispersion, low selectivity, and insufficient peroxidase-like activity, still limit its further development. Therefore, an innovative bioconjugation of a nanozyme and natural enzyme was conducted. In the presence of graphene oxide (GO), histidine magnetic nanoparticles (H-Fe3O4) were first synthesized by a solvothermal method. The GO-supported H-Fe3O4 (GO@H-Fe3O4) exhibited superior dispersity and biocompatibility because GO was the carrier and possessed outstanding peroxidase-like activity because of the introduction of histidine. Furthermore, the mechanism of the peroxidase-like activity of GO@H-Fe3O4 was the generation of •OH. Uric acid oxidase (UAO) was selected as the model natural enzyme and covalently linked to GO@H-Fe3O4 with hydrophilic poly(ethylene glycol) as a linker. UAO could specifically catalyze the oxidation of uric acid (UA) to generate H2O2, and subsequently, the newly produced H2O2 oxidized the colorless 3,3',5,5'-tetramethylbenzidine (TMB) to blue ox-TMB under the catalysis of GO@H-Fe3O4. Based on the above cascade reaction, the GO@H-Fe3O4-linked UAO (GHFU) and GO@H-Fe3O4-linked ChOx (GHFC) were used for the detection of UA in serum samples and cholesterol (CS) in milk, respectively. The method based on GHFU exhibited a wide detection range (5-800 µM) and a low detection limit (1.5 µM) for UA, and the method based on GHFC exhibited a wide detection range (4-400 µM) and a low detection limit (1.13 µM) for CS. These results demonstrated that the proposed strategy had great potential in the field of clinical detection and food safety.

Linking peptide-oriented surface imprinting magnetic nanoparticle with carbon nanotube-based fluorescence signal output device for ultrasensitive detection of glycoprotein.

Determination of trace glycoprotein has important guiding significance in clinical diagnosis and is usually achieved by immunoaffinity. However, immunoaffinity possesses inherent drawbacks, such as poor probability of high-quality antibodies, instability of biological reagents, and harmfulness of chemical labels to the body. Herein, we propose an innovative method of peptide-oriented surface imprinting to fabricate artificial antibody for recognition of glycoprotein. By integrating peptide-oriented surface imprinting and PEGylation, an innovative hydrophilic peptide-oriented surface imprinting magnetic nanoparticle (HPIMN) was successfully fabricated with human epidermal growth factor receptor-2 (HER2) as a model glycoprotein template. In addition, we further prepared a novel boronic acid-modified/fluorescein isothiocyanate-loaded/polyethylene glycol-covered carbon nanotube (BFPCN) as fluorescence signal output device, which was loaded with numerous fluorescent molecules could specifically label the cis-diol of glycoprotein at physiological pH via boronate-affinity interaction. To prove the practicability, we proposed a HPIMN-BFPCN strategy, in which the HPIMN first selectively captured the HER2 due to the molecular imprinted recognition and then the BFPCN specific labeled the exposed cis-diol of HER2 based on the boronate-affinity reaction. The HPIMN-BFPCN strategy exhibited ultrahigh sensitivity with limit of detection of 14 fg mL-1 and was successfully used in the determination of HER2 in spiked sample with recovery and relative standard deviation in the range of 99.0%-103.0% and 3.1%-5.6%, respectively. Therefore, we believe that the novel peptide-oriented surface imprinting has great potential to become an universal strategy for fabrication of recognition units for other protein biomarkers, and the synergy sandwich assay could become a powerful tool in prognosis evaluation and clinical diagnosis of glycoprotein-related diseases.

Bioconjugation of nanozyme and natural enzyme for ultrasensitive detection of cholesterol.

When nanozymes are used in biological analysis, higher activity can improve the detection sensitivity, and better selectivity can eliminate other interference. To improve the specificity and sensitivity, we fabricated an innovative bioconjugated nanozyme with natural enzyme (BNNZ), in which natural ChOx was immobilized onto histidine-modified Fe3O4 (His-Fe3O4) with hydrophilic poly(ethylene glycol) (PEG) as a linker. ChOx could specifically catalyze the oxidation of cholesterol to generate H2O2 molecule, and then the newly formed H2O2 oxidized the colorless 3,3',5,5'-tetramethylbenzidine (TMB) into blue ox-TMB by peroxidase-like His-Fe3O4. According to the above cascade reaction, the BNNZ-based colorimetric strategy was proposed for the detection of cholesterol. Wherein, natural enzymes specifically catalyzed substrates, which endowed BNNZ with excellent specificity for target molecules; meanwhile, the introduction of histidine on His-Fe3O4 effectively increased the peroxidase-like activity of BNNZ, which provided a guarantee for sensitivity. Furthermore, BNNZ after reaction could be rapidly separated by an external magnetic field without interfering with colorimetric quantitative detection. The proposed strategy exhibited excellent sensitivity with limit of detection of 0.446 µM and was successfully used for the detection of cholesterol in spiked human serum sample with recovery and relative standard deviation in the range of 97.9-103.5% and 2.5-4.0%, respectively. This work indicates that the bioconjugation of nanozyme and natural enzyme may be a universal strategy for synthesis of high-performance enzyme-nanozyme systems, and the new-type BNNZ will be widely used in biological detection and disease treatment.

Improving performance of cell imprinted PDMS by integrating boronate affinity and local post-imprinting modification for selective capture of circulating tumor cells from cancer patients.

Efficient capture of circulating tumor cells (CTCs) from cancer patients is an important technique that may promote early diagnosis and prognosis monitoring of cancer. However, the existing systems have certain disadvantages, such as poor selectivity, low capture efficiency, consumption of antibodies, and difficulty in release of CTCs for downstream analysis. Herein, we fabricated an innovative PEGylated boronate affinity cell imprinted polydimethylsiloxane (PBACIP) for highly efficient capture of CTCs from cancer patients. The antibody-free PBACIP possessed hierarchical structure of imprinted cavities, which were inlaid with boronic acid modified SiO2 nanoparticles (SiO2@BA), so it could specifically capture target CTCs from biological samples due to the synergistic effect of boronate affinity and cell imprinting. Furthermore, PEGylation was accurately completed in the non-imprinted region by the template cells occupying the imprinted cavity, which not only retained the microstructure of original imprinted cavities, but also endowed PBACIP with hydrophilicity. The artificial PBACIP could efficiently capture human breast-cancer cells from biological sample. When 5 to 500 SKBR3 cells were spiked in 1 mL mice lysed blood, the capture efficiency reached 86.7 ± 11.5% to 96.2 ± 2.3%. Most importantly, the PBACIP was successfully used to capture CTCs from blood of breast cancer patients, and the captured CTCs were released for subsequent gene mutation analysis. The PBACIP can efficiently capture and release CTCs for downstream analysis, which provides a universal strategy toward individualized anti-tumor comprehensive treatments and has great potential in the future cell-based clinical applications.

Fabrication of self-healing magnetic nanoreceptors for glycoprotein via integrating boronate-affinity-oriented and sequential surface imprinting.

Molecularly imprinted polymers (MIPs) as artificial receptors have been widely applied in various fields. However, construction of MIPs for precise recognition of glycoprotein still remains a rather challenging task. To overcome this problem, we first fabricated boronate-affinity-oriented and sequential-surface imprinting magnetic nanoparticles (BSIMN) through integrating the boronate-affinity-oriented and sequential surface imprinting. The boronate-affinity-oriented immobilization of glycoprotein template endowed the BSIMN with homogeneous imprinted cavities. In addition, the polydopamine (PDA) imprinted layer was introduced by self-polymerization of dopamine in the first imprinting process, and then the phenylboronic acid (PBA) imprinted layer was introduced by boronate-affinity interaction in the second imprinting process. Surprisingly, the PBA imprinted layer possessed self-healing property due to the presence of pH-dependent boronate-affinity interaction between two imprinted layers. Therefore, the fabricated BSIMN exhibited excellent selectivity toward glycoprotein templates. To quantitatively detect glycoproteins in biological samples, the BSIMN was linked with hydrophilic rhodamine B-loaded/boronic acid-modified graphene oxide (HRBGO), which could selectively label glycoprotein and output amplified signal. In quantitative analysis, target glycoproteins were firstly captured by BSIMN and then specifically labeled by HRBGO; subsequently, the releasing agent was added to release numerous rhodamine B from HRBGO, and the corresponding fluorescence signal was used for further quantitative analysis. The proposed strategy showed ultrahigh sensitivity for ovalbumin, carcinoembryonic antigen and alpha fetoprotein with limit of detection of 4.5 fg mL-1, 3.6 fg mL-1 and 4.2 fg mL-1, respectively, and was successfully applied in determination of these glycoproteins in serum samples.

Construction of PEGylated boronate-affinity-oriented imprinting magnetic nanoparticles for ultrasensitive detection of ellagic acid from beverages.

Molecularly imprinted polymers (MIPs) can exhibit antibody-level affinity for target molecules. However, the nonspecific adsorption of non-imprinted regions for non-target molecules limits the application range of MIPs. Herein, we fabricated PEGylated boronate-affinity-oriented ellagic acid-imprinting magnetic nanoparticles (PBEMN), which first integrated boronate-affinity-oriented surface imprinting and sequential PEGylation for small molecule-imprinted MIPs. The resultant PBEMN possess higher adsorption capacity and faster adsorption rate for template ellagic acid (EA) molecules than the non-PEGylated control. To prove the excellent performance, the PBEMN were linked with hydrophilic boronic acid-modified/fluorescein isothiocyanate-loaded graphene oxide (BFGO), because BFGO could selectively label cis-diol-containing substances by boronate-affinity and output ultrasensitive fluorescent signals. Based on a dual boronate-affinity synergy, the PBEMN first selectively captured EA molecules by boronate-affinity-oriented molecular imprinted recognition, and then the EA molecules were further labeled with BFGO through boronate-affinity. The PBEMN linked BFGO (PBPF) strategy provided ultrahigh sensitivity for EA molecules with a limit of detection of 39.1 fg mL-1, resulting from the low nonspecific adsorption of PBEMN and the ultrasensitive fluorescence signal of BFGO. Lastly, the PBPF strategy was successfully employed in the determination of EA concentration in a spiked beverage sample with recovery and relative standard deviation in the range of 96.5 to 104.2% and 3.8 to 5.1%, respectively. This work demonstrates that the integration of boronate-affinity-oriented surface imprinting and sequential PEGylation may be a universal tool for improving the performance of MIPs.

Hydrophilic rhodamine B-loaded / boronic acid-modified graphene oxide nanocomposite as a substitute of enzyme-labeled second antibody for ultrasensitive detection of antibodies.

Enzyme-labeled secondary antibody is often used to amplify the output signal in the process of antibody detection. However, its preparation process is complex and time-consuming. Herein, we fabricated an innovative hydrophilic rhodamine B-loaded / boronic acid-modified graphene oxide (HRBGO) nanocomposite, used as a substitute of enzyme-labeled second antibody. The synthetic HRBGO was loaded with generous rhodamine B and modified with boronic acid. Therefore, the HRBGO could selectively label the carbohydrate chains of Fc fragment of primary antibody through specific boronate affinity recognition, and then perform signal output and amplification by releasing rhodamine B. To verify the practicability of HRBGO, trastuzumab as a humanized monoclonal antibody targeting human epidermal growth factor receptor-2 (HER2) was selected as model antibody. A glycosylation site-blocked / HER2-immobilized magnetic nanoparticles (GHMN) was also prepared for selectively capturing trastuzumab from complex samples via specific immunoaffinity. Because the glycosylation sites of HER2 can also be labeled with the HRBGO by boronate affinity recognition, these sites were blocked by a masking agent to minimize the background signal. For specific and ultrasensitive detection of trastuzumab, the integration of GHMN and HRBGO was proposed and optimized in detail. Trastuzumab detection based on HRBGO consisted of three steps: specific capture, selective labeling, and output signal. The proposed strategy provided ultrahigh sensitivity with limit of detection of 0.35 fg mL-1 and was successfully applied in the detection of trastuzumab in spiked serum sample with recovery and relative standard deviation in the range of 98.7-103.8% and 3.8-6.0%, respectively. To assess universal applicability, the HRBGO was also successfully used for the determination of anti-SARS-COV2 RBD antibody in human serum sample.

Poly(caffeic acid)-coated molecularly imprinted magnetic nanoparticles for specific and ultrasensitive detection of glycoprotein.

Molecularly imprinted polymers (MIPs) are artificial chemical receptors, and can recognize template molecules with a high selectivity and affinity. As "antibody mimics", MIPs have been widely studied in various fields. However, the general applicability of MIPs is limited by the type of functional monomers. Herein, we developed caffeic acid (CA, a natural polyphenol) as novel a functional monomer. An innovative poly(caffeic acid)-coated molecularly imprinted magnetic nanoparticles (PCA-MIMN) with transferrin (TRF) as a model glycoprotein template was fabricated by autoxidation of CA with hexamethylenediamine (HMDA) in an aerobic environment as imprinted layer. The successful fabrication of PCA-MIMN was proved in detail by diversified characterization. The PCA-MIMN exhibited not only outstanding binding affinity and specificity for target glycoprotein, but also excellent hydrophilicity due to the externally generous hydrophilic groups. To evaluate the preeminent performance, the PCA-MIMN was linked with pH-triggered allochroic-graphene oxide (AGO), which was used for determination of TRF in real samples. The proposed PCA-MIMN linked AGO strategy exhibited ultrahigh sensitivity with limit of detection of 0.38 pg mL-1 for TRF. Finally, the proposed strategy was successfully applied in determination of TRF in spiked human serum sample with recovery and relative standard deviation in the range of 97.2%-103.9% and 4.6%-5.8%, respectively. This work demonstrates that the "autoxidation of CA with HMDA" may be a universal tool for synthesis of highly specific MIPs, and the type of functional monomers will increase exponentially due to the presence of numerous polyphenols in nature.

PEGylation of boronate-affinity-oriented surface imprinting magnetic nanoparticles with improved performance.

High specific selectivity is the continuous goal of exploit glycoprotein-imprinted materials. Boronate-affinity-oriented surface imprinting can limit the heterogeneity of imprinted cavities, and PEGylation can reduce the nonspecific adsorption of imprinted materials towards non-target molecules. However, there are no reports on the integration of the above two advantages. Herein, we first integrated the boronate-affinity-oriented surface imprinting and PEGylation, and fabricated PEGylated boronate-affinity-oriented surface imprinting magnetic nanoparticles (PBSIMN) with horseradish peroxidase (HRP) as a model glycoprotein template. The successful synthesis of PBSIMN was demonstrated in detail by various characterization. Compared with non-PEGylated control, the PBSIMN showed greater adsorption capacity for HRP, and faster adsorption rate. To evaluate the improved performance, the PBSIMN was linked with hydrophilic boronic acid-modified/fluorescein isothiocyanate-loaded graphene oxide (BFGO), and used for the detection of HRP in real samples. Because PEGylation led to decrease of non-specific binding on PBSIMN, the proposed strategy provided ultrahigh sensitivity with limit of detection of 6.0 fg mL-1 for HRP, which were an order of magnitude lower than the non-PEGylated counterparts. When spiked with 0.05, 0.5 and 5.0 mg mL-1, recoveries of HRP were in the range of 97.4%-101.8% with relative standard deviation (RSD) no more than 5.4% for mouse serum, and between 98.2% and 103.2% with RSD no more than 5.0% human serum. This work indicates that the boronate-affinity-oriented surface imprinting and PEGylation can improve the performance of imprinted materials.

Visual detection of hepatocellular carcinoma cells with cell imprinted substrate and pH-sensitive allochroic-graphene oxide.

Herein, we integrate cell-imprinted substrate (CIS) and allochroic-graphene oxide (AGO) for specific visualization sorting of hepatocellular carcinoma cells. The state-of-the-art-of detection method relies on the enzyme linked immunosorbent assay (ELISA)-like sandwich strategy with hierarchical recognition. The target tumor cells are first selectively captured by the CIS based on cell imprinted recognition, and then specifically labeled with AGO by boronate affinity recognition between boronic acid on AGO and cis-diols on the surface of target cells. The selectively recognition of CIS for target template cells is verified by cell function experiments. It is also worth mentioning that the AGO can specifically recognize target tumor cells under physiological pH, and then perform signal amplification and output through pH-triggered allochroism. The CIS linked AGO for cell assay (CIS-AGO-CA) is successfully used for visualization detection of human hepatocarcinoma HLE cells from hepatocyte suspension. When the hepatocyte suspension is spiked with 1.0 × 105 cells, the recoveries of CIS-AGO-CA are 80.67 ± 4.33% for target HLE cells, and only 12.00 ± 1.00% for non-target Hep3B cells. It is worth emphasizing that the CIS-AGO-CA process is antibody-free. Therefore, this novel ELISA-like sandwich strategy is high specificity, cost-efficient and easy-to-use, and exhibits great prospect in the visualization sorting of tumor subpopulation.

Advances and applications of in-tube solid-phase microextraction for analysis of proteins.

In-tube solid-phase microextraction (IT-SPME) with capillary column as extraction device is a well-established green extraction technique with a lot of applications in the fields of biomedicine, food and environment. This article reviews the research contributions of IT-SPME for analysis of proteins. The paper first briefly describes the history of IT-SPME. Then, the development and principle of IT-SPME for analysis of proteins are introduced, in which capillary column configurations of IT-SPME and instruments for quantitative analysis of proteins are summarized. Subsequently, the synthesis strategy and recognition principle of different recognition units, including antibodies, aptamers, molecularly imprinted polymers, and boronate affinity materials, are discussed in detail. This part also introduces several rare recognition units, including lectins, restricted access materials, lysine modified with ß-cyclodextrin and cell membrane. The development trend and possible future direction of IT-SPME for analysis of proteins are mentioned.

Preparation of teamed boronate affinity magnetic nanoparticles for extraction of polyphenols from Flos Lonicerae Beverage under neutral pH prior to their determination by high-performance liquid chromatography-mass spectrometry.

Traditional boron affinity materials usually capture cis-diol-containing molecules under alkaline condition, but some cis-diol-containing molecules, such as polyphenols, are unstable and easy to be oxidized and degraded under alkaline condition. Teamed boronate affinity (TBA) can specifically capture cis-diol-containing molecules under neutral condition. However, the report about combination of TBA and magnetic nanoparticle for the extraction was rare. Here, we fabricated two kinds of teamed boronate affinity magnetic nanoparticles (TBAMP), including Fe3O4@TBAP and Fe3O4@SiO2@TBAP. Adsorption capacities of cis-diol-containing molecules on the latter were similar to these on the former, but the latter possessed more superior regeneration performance than the former. Therefore, the TBAMP with more superior regeneration performance was used as magnetic solid-phase extraction (MSPE) adsorbent for capturing polyphenols under neutral condition. The TBAMP MSPE was optimized in detail, and combined with high-performance liquid chromatography-mass spectrometry (HPLC-MS) for the simultaneous determination of 13 kinds of polyphenols from Flos Lonicerae Beverage. The proposed method showed low limit of detection between 0.01 and 0.20 ng mL-1. In blank Flos Lonicerae Beverage, 11 kinds of polyphenols ranged from 0.54 ng mL-1 to 52.99 ng mL-1 were detected. In the standard addition method, recoveries of cis-diol-containing polyphenols were between 85.7% and 102.1% with intra-day and inter-day relative standard deviation ranging from 3.2% to 5.1% and 5.3% to 7.3%, respectively.

Preparation of magnetic mesoporous epoxy resin by initiator-free ring-opening polymerization for extraction of bile acids from human serum.

In this work, we reported a simple two-step method for the synthesis of magnetic mesoporous epoxy resin (MMER), including one-pot template-free hydrothermal synthesis of nanoscale amine-functionalized magnetic nanoparticles (MN-NH2) and initiator-free ring-opening polymerization of epoxy resin. The resultant MMER was characterized in detail by transmission electron microscope (TEM), Fourier transform-infrared (FT-IR) spectra, X-ray photoelectron spectroscopy (XPS), thermogravimetic analysis (TGA) and magnetization curves. These results demonstrated successful synthesis of MMER with sufficient magnetic property and excellent thermal stability. The epoxy resin was covalent bonding MN-NH2 on and synthesized by hydrophobic monomers, so the MMER exhibited excellent adsorption quantity for hydrophobic bile acids. The MMER was used as magnetic solid-phase extraction (MSPE) sorbent, and combined with liquid chromatography-tandem mass spectrometry to extract and monitor 11 kinds of bile acids from serum sample. The proposed MSPE combined with LC-MS/MS method exhibited low limit of detection between 0.1 and 5 ng mL-1. In blank serum sample, 9 kinds of bile acids were detected, and ranged from -2.29 ng mL-1 to 6.86 ng mL-1. In standard addition recovery test, the recovery values of detectable bile acids ranged 102.4% to 108.5%, 96.0% to 104.0% and 82.3% to 103.3% when spiked with 0.2, 2.0 and 20 ng mL-1, respectively. The intra- and inter-day precision (n = 6) ranged 3.7% to 5.9% and 7.0% to 9.5%, respectively. The above results demonstrated that the MSPE combined with LC-MS/MS method was accurate and effective for quantitative determination of bile acids from complex biological samples.

Preparation of phenyl-boronic acid polymeric monolith by initiator-free ring-opening polymerization for microextraction of sulfonamides prior to their determination by ultra-performance liquid chromatography-tandem mass spectrometry.

In this study, a novel phenyl-boronic acid polymeric monolith (PBAPM) in polyether ether ketone (PEEK) tube was fabricated. The inner wall of PEEK tube was modified with mussel inspired polydopamine layer to firmly bond PBAPM, so as to avoid the outflow of PBAPM from PEEK tube and improve the service life and application scope of PBAPM. The PBAPM was synthesized by initiator-free ring-opening polymerization based on our previous work. The boric acid groups provided B-N coordination sites, as well as the hydrophobic amino and epoxy monomers provided hydrophobic interaction sites. Due to the synergistic effect of hydrophobic interaction and B-N coordination, the PBAPM exhibited excellent binding amounts for nitrogen-containing sulfonamides (SAs). In addition, the PBAPM possessed excellent stability, rigidity and permeability. Therefore, the PBAPM was used as solid phase microextraction (SPME) material for enrichment and separation of SAs from aqueous samples. The PBAPM SPME was optimized in detail, and combined with ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) analysis for simultaneous determination of 10 kinds of SAs from tap, lake and river water. Using only 1 mL of water samples, limit of quantitation of SAs could reach 0.54-4.5 ng L-1. Recoveries of standard spiked SAs from water samples were between 82.0% and 105.4%, with intra-day and inter-day relative standard deviation ranging from 3.3% to 5.6% and 4.2% to 8.1%, respectively. The PBAPM SPME combined with UPLC-MS/MS method shown better or similar recoveries, and used fewer samples than previous methods. These results demonstrated that the PBAPM could selectively separate and enrich ultra-trace nitrogen-containing SAs from aqueous samples.

Preparation of phenyl-boronic acid polymer monolith by initiator-free ring-opening polymerization for microextraction of sulfamethoxazole and trimethoprim from animal-originated foodstuffs.

Boronate affinity materials are usually used for selective enrichment of cis-diol-containing compounds, mainly based on formation of pH-dependent cyclic ester between cis-diol and boronic acid. Recently, B-N coordination, or combined with hydrogen-bonding interaction, was employed as primary interaction for the extraction of nitrogen-containing compounds. However, there are no reports about the combination of hydrophobic (or π-π) interaction and B-N coordination for the extraction. Here, we prepared a novel hydrophobic phenyl-boronic acid polymer (PBAP) through initiator-free ring-opening polymerization. The adsorption experiment indicated that the PBAP could combine hydrophobic (or π-π) interaction and B-N coordination to enhance their adsorption capacity toward hydrophobic and nitrogen-containing compounds, for example sulfamethoxazole (SMX) and trimethoprim (TMP). In addition, the PBAP monolith synthesized in pipette tip was used as solid phase microextraction (SPME) sorbent with combination of ultra high performance liquid chromatography to extract and monitor SMX and TMP from animal-originated foodstuffs. The proposed method exhibited low limit of quantitation as 5.0 and 1.0 ng mL-1 for SMX and TMP, respectively. The recoveries at three spiked levels were between 92.4% to 100.5% for SMX, and 92.7% to 102.6% for TMP, with intra-day and inter-day relative standard deviations no more than 5.3% and 8.6%, respectively. These results well demonstrated that the combination of hydrophobic (or π-π) interaction and B-N coordination played an important role in the extraction of hydrophobic and nitrogen-containing compounds.

Synthesis of boronate-decorated polyethyleneimine-grafted porous layer open tubular capillaries for enrichment of polyphenols in fruit juices.

A combination between modification with porous layer and grafting of polyethyleneimine (PEI) on the inner face of capillary was for the first time developed for boronate affinity in-tube solid-phase microextraction (SPME) material to enhance the extraction capacity for cis-diol-containing polyphenols. The successful synthesis of boronate-decorated polyethyleneimine-grafted porous layer open tubular (BPPLOT) capillary was confirmed by scanning electron micrograph, Fourier transform-infrared spectra and absorption experiments. The porous layer, PEI and boronate affinity provided high specific surface area, more binding sites for boronate groups and specific selectivity of BPPLOT capillary, respectively. The maximum binding quantity of BPPLOT capillary greatly improved, and ranged from 143 to 170 µg m-1 for cis-diol-containing polyphenols (catechin, chlorogenic acid, caffeic acid and epicatechin). A green method based on boronate affinity in-tube SPME was developed for separation and enrichment polyphenols, and some parameters of in-tube SPME were optimized. After in-tube SPME, HPLC with UV detection was used for quantitative determination of polyphenols. Recoveries of standard spiked cis-diol-containing polyphenols from fruit juice were between 80.9% and 102%, with intra-day and inter-day coefficient of variation ranging from 4.8% to 7.3% and 5.0% to 8.6%, respectively. Conversely, recovery of non-cis-diol-containing ferulic acid was no greater than 3.0%. These results suggested that the BPPLOT capillary could effectively separate and enrich cis-diol-containing polyphenols from real samples.