RESUMEN
The design of a low-iridium-loading anode catalyst layer with high activity and durability is a key challenge for a proton exchange membrane water electrolyzer (PEMWE). Here, the synthesis of a novel supported IrO2 nanocatalyst with a tri-layered structure, dubbed IrO2@TaOx@TaB that is composed of ultrasmall IrO2 nanoparticles anchored on amorphous TaOx overlayer of TaB nanorods is reported. The composite electrocatalyst shows great activity and stability toward the oxygen evolution reaction (OER) in acid, thanks to its dual-interface structural feature. The electronic interaction in IrO2/TaOx interface can regulate the coverage of surface hydroxyl groups, the Ir3+/ Ir4+ ratio, and the redox peak potential of IrO2 for enhancing OER activity, while the dense TaOx overlayer can prevent further oxidation of TaB substrate and stabilize the IrO2 catalytic layers for improving structural stability during OER. The IrO2@TaOx@TaB can be used to fabricate an anode catalyst layer of PEMWE with an iridium-loading as low as 0.26 mg cm-2. The low-iridium-loading PEMWE delivers high current densities at low cell voltages (e.g., 3.9 A cm-2@2.0 V), and gives excellent activity retention for more than 1500 h at 2.0 A cm-2 current density.
RESUMEN
Understanding the water-involved mechanism on metal oxide surface and the dynamic interaction of water with active sites is crucial in solving water poisoning in catalytic reactions. Herein, this work solves this problem by designing the water-promoted function of metal oxides in the ethanol oxidation reaction. In situ multimodal spectroscopies unveil that the competitive adsorption of water-dissociated *OH species with O2 at Sn active sites results in water poisoning and the sluggish proton transfer in CoO-SnO2 imparts water-resistant effect. Carbon material as electron donor and proton transport channel optimizes the Co active sites and expedites the reverse hydrogen spillover from CoO to SnO2. The water-promoted function arises from spillover protons facilitating O2 activation on the SnO2 surface, leading to crucial *OOH intermediate formation for catalyzing C-H and C-C cleavage. Consequently, the tailored CoO-C-SnO2 showcases a remarkable 60-fold enhancement in ethanol oxidation reaction compared to bare SnO2 under high-humidity conditions.
RESUMEN
A Gram-stain-negative, aerobic, non-spore-forming, nonmotile, rod-shaped, and yellow-pigmented bacterium, designated strain JXAS1T, was isolated from a freshwater sample collected from Poyang Lake in China. Phylogenetic analysis based on 16S rRNA gene sequence revealed that the isolate belonged to the genus Flavobacterium, being closest to Flavobacterium pectinovorum DSM 6368T (98.61â%). The genome size of strain JXAS1T was 4.66 Mb with DNA G+C content 35.7 mol%. The average nucleotide identity and in silico DNA-DNA hybridization values between strain JXAS1T and its closest relatives were below the threshold values of 95 and 70â%, respectively. The strain contained menaquinone 6 (MK-6) as the predominant menaquinone and the major polar lipids were phosphatidylethanolamine, one unidentified glycolipid, and one unidentified polar lipid. The major fatty acids (>5â%) were iso-C15â:â0, summed feature 3 (C16â:â1 ω7c and/or C16â:â1 ω6c), C15â:â0, iso-C17â:â0 3OH, iso-C15â:â0 3OH, and summed feature 9 (iso-C17â:â1 ω9c and/or 10-methyl C16â:â0). Based on phylogenetic, genotypic, and phenotypic evidence, the isolated strain represents a new species in the genus Flavobacterium, and the name Flavobacterium poyangense is proposed. The type strain is JXAS1T (=GDMCC 1.1378T=KCTC 62719T).
Asunto(s)
Técnicas de Tipificación Bacteriana , Composición de Base , ADN Bacteriano , Ácidos Grasos , Flavobacterium , Lagos , Hibridación de Ácido Nucleico , Filogenia , ARN Ribosómico 16S , Análisis de Secuencia de ADN , Vitamina K 2 , Flavobacterium/genética , Flavobacterium/clasificación , Flavobacterium/aislamiento & purificación , Lagos/microbiología , China , ARN Ribosómico 16S/genética , Vitamina K 2/análogos & derivados , Vitamina K 2/análisis , ADN Bacteriano/genética , Fosfatidiletanolaminas , Glucolípidos/análisis , Fosfolípidos/análisisRESUMEN
High-entropy oxides (HEOs), featuring infinite chemical composition and exceptional physicochemical properties, are attracting much attention. The configurational entropy caused by a component disorder of HEOs is popularly believed to be the main driving force for thermal stability, while the role of vibrational entropy in the thermodynamic landscape has been neglected. In this study, we systematically investigated the vibrational entropy of multicomponent rutile oxides (including Fe0.5Ta0.5O2, Fe0.333Ti0.333Ta0.333O2, Fe0.25Ti0.25Ta0.25Sn0.25O2, and Fe0.21Ti0.21Ta0.21Sn0.21Ge0.16O2) by precise heat capacity measurements. It is found that vibrational entropy gradually decreases with increasing component disorder, beyond what one could expect from an equilibrium thermodynamics perspective. Moreover, all multicomponent rutile oxides exhibit a positive excess vibrational entropy at 298.15 K. Upon examinations of configuration disorder, size mismatch, phase transition, and polyhedral distortions, we demonstrate that the excess vibrational entropy plays a pivotal role in lowering the crystallization temperature of multicomponent rutile oxides. These findings represent the first experimental confirmation of the role of lattice vibrations in the thermodynamic landscape of rutile HEOs. In particular, vibrational entropy could serve as a novel descriptor to guide the predictive design of multicomponent oxide materials.
RESUMEN
Understanding the structure-performance relationships of a frustrated Lewis pair (FLP) at the atomic level is key to yielding high efficiency in activating chemically "inert" molecules into value-added products. A sound strategy was developed herein through incorporating oxygen defects into a Zr-based metal-organic layer (Zr-MOL-D) and employing Lewis basic proximal surface hydroxyls for the in situ formation of solid heterogeneous FLP (Zr4-δ-VO-Zr-OH). Zr-MOL-D exhibits a superior CO2 to CO conversion rate of 49.4 µmol g-1 h-1 in water vapor without any sacrificing agent or photosensitizer, which is about 12 times higher than that of pure MOL (Zr-MOL-P), with extreme stability even after being placed for half a year. Theoretical and experimental results reveal that the introduction of FLP converts the process of the crucial intermediate COOH* from an endothermic reaction to an exothermic spontaneous reaction. This work is expected to provide new prospects for developing efficient MOL-based photocatalysts in FLP chemistry through a sound defect-engineering strategy.
RESUMEN
Interfacial interaction dictates the overall catalytic performance and catalytic behavior rules of the composite catalyst. However, understanding of interfacial active sites at the microscopic scale is still limited. Importantly, identifying the dynamic action mechanism of the "real" active site at the interface necessitates nanoscale, high spatial-time-resolved complementary-operando techniques. In this work, a Co3O4 homojunction with a well-defined interface effect is developed as a model system to explore the spatial-correlation dynamic response of the interface toward oxygen evolution reaction. Quasi in situ scanning transmission electron microscopy-electron energy-loss spectroscopy with high spatial resolution visually confirms the size characteristics of the interface effect in the spatial dimension, showing that the activation of active sites originates from strong interfacial electron interactions at a scale of 3 nm. Multiple time-resolved operando spectroscopy techniques explicitly capture dynamic changes in the adsorption behavior for key reaction intermediates. Combined with density functional theory calculations, we reveal that the dynamic adjustment of multiple adsorption configurations of intermediates by highly activated active sites at the interface facilitates the O-O coupling and *OOH deprotonation processes. The dual dynamic regulation mechanism accelerates the kinetics of oxygen evolution and serves as a pivotal factor in promoting the oxygen evolution activity of the composite structure. The resulting composite catalyst (Co-B@Co3O4/Co3O4 NSs) exhibits an approximately 70-fold turnover frequency and 20-fold mass activity than the monomer structure (Co3O4 NSs) and leads to significant activity (η10 â¼257 mV). The visual complementary analysis of multimodal operando/in situ techniques provides us with a powerful platform to advance our fundamental understanding of interfacial structure-activity relationships in composite structured catalysts.
RESUMEN
Iron-based perovskite air electrodes for protonic ceramic cells (PCCs) offer broad application prospects owing to their reasonable thermomechanical compatibility and steam tolerance. However, their insufficient electrocatalytic activity has considerably limited further development. Herein, oxygen-vacancy-rich BaFe0.6Ce0.2Sc0.2O3-δ (BFCS) perovskite is rationally designed by a facile Sc-substitution strategy for BaFe0.6Ce0.4O3-δ (BFC) as efficient and stable air electrode for PCCs. The BFCS electrode with an optimized Fe 3d-eg orbital occupancy and more oxygen vacancies exhibits a polarization resistance of ≈ 0.175 Ω cm2 at 600 °C, ≈ 1/3 of the BFC electrode (≈0.64 Ω cm2). Simultaneously, BFCS shows favorable proton uptake with a low proton defect formation enthalpy (- 81 kJ mol-1). By combining soft X-ray absorption spectroscopy and electrical conductivity relaxation studies, it is revealed that the enhancement of Fe4+-O2- interactions in BFCS promotes the activation and mobility of lattice oxygen, triggering the activity of BFCS in both oxygen reduction and evolution reactions (ORR/OER). The single cell achieves encouraging output performance in both fuel cell (1.55 W cm-2) and electrolysis cell (-2.96 A cm-2 at 1.3 V) modes at 700 °C. These results highlight the importance of activating lattice oxygen in air electrodes of PCCs.
RESUMEN
The interactions between the catalyst and support are widely used in many important catalytic reactions but the construction of strong interaction with definite microenvironments to understand the structure-activity relationship is still challenging. Here, strongly-interacted composites are prepared via selective exsolution of active NiSe2 from the host matrix of NiFe2O4 (S-NiSe2/NiFe2O4) taking advantage of the differences of migration energy, in which the NiSe2 possessed both high dispersion and small size. The characteristics of spatially resolved scanning transmission X-ray microscopy (STXM) coupled with analytical Mössbauer spectra for the surface and bulk electronic structures unveiled that this strongly interacted composite triggered more charge transfers from the NiSe2 to the host of NiFe2O4 while stabilizing the inherent atomic coordination of NiFe2O4. The obtained S-NiSe2/NiFe2O4 exhibits overpotentials of 290 mV at 10 mA cm-2 for oxygen evolution reaction (OER). This strategy is general and can be extended to other supported catalysts, providing a powerful tool for modulating the catalytic performance of strongly-interacted composites.