Causal association between type 2 diabetes mellitus and acute suppurative otitis media: insights from a univariate and multivariate Mendelian randomization study.

Background: Type 2 diabetes mellitus (T2DM) and hearing loss (HL) constitute significant public health challenges worldwide. Recently, the association between T2DM and HL has aroused attention. However, possible residual confounding factors and other biases inherent to observational study designs make this association undetermined. In this study, we performed univariate and multivariable Mendelian Randomization (MR) analysis to elucidate the causal association between T2DM and common hearing disorders that lead to HL. Methods: Our study employed univariate and multivariable MR analyses, with the Inverse Variance Weighted method as the primary approach to assessing the potential causal association between T2DM and hearing disorders. We selected 164 and 9 genetic variants representing T2DM from the NHGRI-EBI and DIAGRAM consortium, respectively. Summary-level data for 10 hearing disorders were obtained from over 500,000 participants in the FinnGen consortium and MRC-IEU. Sensitivity analysis revealed no significant heterogeneity of instrumental variables or pleiotropy was detected. Results: In univariate MR analysis, genetically predicted T2DM from both sources was associated with an increased risk of acute suppurative otitis media (ASOM) (In NHGRI-EBI: OR = 1.07, 95% CI: 1.02-1.13, P = 0.012; In DIAGRAM: OR = 1.14, 95% CI: 1.02-1.26, P = 0.016). Multivariable MR analysis, adjusting for genetically predicted sleep duration, alcohol consumption, body mass index, and smoking, either individually or collectively, maintained these associations. Sensitivity analyses confirmed the robustness of the results. Conclusion: T2DM was associated with an increased risk of ASOM. Strict glycemic control is essential for the minimization of the effects of T2DM on ASOM.

Lateral Flow Assay Biotesting by Utilizing Plasmonic Nanoparticles Made of Inexpensive Metals─Replacing Colloidal Gold.

Nanoparticles (NPs) can be conjugated with diverse biomolecules and employed in biosensing to detect target analytes in biological samples. This proven concept was primarily used during the COVID-19 pandemic with gold-NP-based lateral flow assays (LFAs). Considering the gold price and its worldwide depletion, here we show that novel plasmonic NPs based on inexpensive metals, titanium nitride (TiN) and copper covered with a gold shell (Cu@Au), perform comparable to or even better than gold nanoparticles. After conjugation, these novel nanoparticles provided high figures of merit for LFA testing, such as high signals and specificity and robust naked-eye signal recognition. Since the main cost of Au NPs in commercial testing kits is the colloidal synthesis, our development with the Cu@Au and the laser-ablation-fabricated TiN NPs is exciting, offering potentially inexpensive plasmonic nanomaterials for various bioapplications. Moreover, our machine learning study showed that biodetection with TiN is more accurate than that with Au.

Lateral Flow Assays Biotesting by Utilizing Plasmonic Nanoparticles Made of Inexpensive Metals - Replacing Colloidal Gold.

Nanoparticles (NPs) can be conjugated with diverse biomolecules and employed in biosensing to detect target analytes in biological samples. This proven concept was primarily used during the COVID-19 pandemic with gold NPs-based lateral flow assays (LFAs). Considering the gold price and its worldwide depletion, here we show that novel plasmonic nanoparticles (NPs) based on inexpensive metals, titanium nitride (TiN) and copper covered with a gold shell (Cu@Au), perform comparable or even better than gold nanoparticles. After conjugation, these novel nanoparticles provided high figures of merit for LFA testing, such as high signals and specificity and robust naked-eye signal recognition. To the best of our knowledge, our study represents the 1st application of laser-ablation-fabricated nanoparticles (TiN) in the LFA and dot-blot biotesting. Since the main cost of the Au NPs in commercial testing kits is in the colloidal synthesis, our development with TiN is very exciting, offering potentially very inexpensive plasmonic nanomaterials for various bio-testing applications. Moreover, our machine learning study showed that the bio-detection with TiN is more accurate than that with Au.

Recent Advances in Hierarchical Porous Engineering of MOFs and Their Derived Materials for Catalytic and Battery: Methods and Application.

Hierarchical porous materials have attracted the attention of researchers due to their enormous specific surface area, maximized active site utilization efficiency, and unique structure and properties. In this context, metal-organic frameworks (MOFs) offer a unique mix of properties that make them particularly appealing as tunable porous substrates containing highly active sites. This review focuses on recent advances in the types and synthetic strategies of hierarchical porous MOFs and their derived materials. Furthermore, it highlights the relationship between the mass diffusion and transport of hierarchical porous structures and the pore size with examples and simulations, while identifying their potential and limitations. On this basis, how the synthesis conditions affect the structure and electrochemical properties of MOFs based hierarchical porous materials with different structures is discussed, highlighting the prospects and challenges for the synthetization, as well as further scientific research and practical applications. Finally, some insights into current research and future design ideas for advanced MOFs based hierarchical porous materials are presented.

The reproductive endocrine feature and conception outcome of women with unknown etiological menstrual cycle (36-45 days) with long follicular phase.

OBJECTIVE: To explore the reproductive endocrine feature and conception outcome of women with unknown etiological long menstrual cycle (LMC) (36-45 days) with long follicular phase. METHODS: In the cohort study, we included 80 women with unknown etiological long menstrual cycle of biphasic basal body temperature (BBT) lasting for 36-45 days and 87 controls with normal cycle of biphasic BBT into LMC group and NMC group, respectively. Serum hormone levels, fasting glucose, and insulin of participants were tested, and ovulation was observed by ultrasound. The conception outcome was followed up within 12 menstrual cycles. RESULTS: In the LMC group, the rate of abnormality of HOMA-insulin resistance index (40.0% vs. 20.7%, p < .01), luteal phase defect (30.9% vs. 13.8%, p < .05) and abnormality of FSH/LH ratio (15.6% vs. 5.7%, p < .05) were all significantly higher, but the serum estradiol level on the day before ovulation (261.10 pg/mL vs. 320.26 pg/mL, p < .01) was lower. The rate of poor ovulation quality (31.3% vs.15.4%, p < .05) in the LMC group was significantly higher than the NMC group. In the LMC group, the natural conception rate within 12 menstrual cycles was lower (41.9% vs. 66.2%, p < .01), whereas the spontaneous abortion rate in early pregnancy (29.0% vs. 9.8%, p < .05) and the conversion rate (21.6% vs. 5.2%, p < .01) to anovulation within 12 cycles were significantly higher. CONCLUSIONS: Women with unknown etiological menstrual cycle (36-45 days) with long follicular phase have greater endocrine abnormality and higher risk of spontaneous abortion, infertility, and conversion to anovulation. Moderate early intervention may be advisable for these women, especially those who wish to get pregnant.

Reconfigurable spot size converter for the silicon photonics integrated circuit.

Spot size converter (SSC) plays a role of paramount importance in the silicon photonics integrated circuit. In this article, we report the design of a reconfigurable spot size converter used in the hybrid integration of a DFB laser diode with a silicon photonic waveguide. Our SSC consists of subwavelength gratings and thermal phase shifters. Four subwavelength grating tips are used to improve horizontal misalignment tolerance. Meanwhile, the phase mismatch between two input waveguides is compensated by phase shifters to minimize insertion losses. Our simulated result has yielded a minimum insertion loss of 0.63 dB and an improvement of the horizontal misalignment from ±0.65 µm to ±1.69 µm for 1 dB excess insertion loss at the wavelength of 1310 nm. The phase shifters are designed to compensate any phase error in both the fabrication and bonding processes, which provides a completely new edge-coupling strategy for the silicon photonics integrated circuit.

Effect of Early and Intensive Rehabilitation after Ischemic Stroke on Functional Recovery of the Lower Limbs: A Pilot, Randomized Trial.

OBJECTIVE: We aimed to develop an early and intense lower extremity training technique using a recumbent cycle ergometer system in patients with acute ischemic stroke. METHODS: This was a pilot, prospective, randomized, controlled study with 2 parallel groups followed for 3 months with blinded assessment of outcomes. Thirty-one eligible patients were randomized to experimental and control groups. To strengthen the motion of the lower extremities within 48 hours after stroke, the control and experimental groups received conventional treatment and additional interventions under a therapist's guidance combined with conventional treatment, respectively. The primary outcome measure was the change in lower extremity motor control from admission to 4 weeks, assessed by the Fugl-Meyer Assessment. Secondary outcomes were the number of days to walking 50 m and the change in the Berg Balance Scale score and Barthel index. The modified Rankin Score was used to assess the overall function and prognosis at 3 months. RESULTS: Fugl-Meyer Assessment and Berg Balance Scale scores and Barthel index increased over time in the experimental group, as did the Berg Balance Scale score and Barthel index in the control group (P < .001). However, Fugl-Meyer Assessment scores in the control group were similar over time (F = 2.303, P = 1.119). Fugl-Meyer Assessment scores in the experimental group were higher than those in the control group after 2 and 4 weeks (P = .084 and .037, respectively). Compared with the control group at 2 weeks or at discharge, the percentage of patients who returned to unassisted walking in the experimental group showed an increasing trend (56.3% versus 26.67%, P = .095), but there was no significant difference between the 2 groups after 3 months (P = .598). The modified Rankin Score at 3 months showed no significant difference between the 2 groups (P > .05). CONCLUSIONS: Our early and intense lower extremity training technique involving a leg cycle ergometer system contributes to the recovery of lower extremity function in patients with acute ischemic stroke. This finding will provide a basis for future investigations on the applicability of the intervention in early lower extremity and walking rehabilitation among individuals with neurological disorder.

Study on epsilon crossover wavelength tuning of heavily doped germanium-on-silicon in mid-infrared range.

In this paper, we demonstrate that n-type heavily doped germanium (Ge) can serve as a sort of CMOS-compatible, permittivity crossover wavelength (at which the real part of permittivity changes sign) wide range adjustable epsilon-zero material in mid-infrared (MIR). The antimony (Sb) doped Ge films with high doping concentrations have been highly crystalline grown on silicon substrates with the molecular beam epitaxy (MBE) process. Our results reveal that the crossover wavelength of doped germanium is highly tunable by adjusting the carrier concentration and crystallinity of the films simultaneously. By optimizing dopant flux and substrate temperature, the maximum carrier concentration can be achieved as high as 1.6×1020 cm-3, resulting in a very short crossover wavelength of 4.31 µm, which is very difficult to realize in group IV semiconductors. The heavily doping process also enables it possible to observe the room temperature photoluminescence (PL) from direct band transition of germanium films.

Direct Observations of Surface Plasmon Polaritons in Highly Conductive Organic Thin Film.

Plasmonic effect plays a significant role in many optoelectronic devices and enables various innovative applications. It has been widely studied in metallic materials, for example, Ag and Au, and later was expanded to transparent conductive oxides, etc. However, such plasmonic structures have limitations in many emerging optoelectronics including flexible optoelectronics, organic optoelectronics, and so on, due to their inorganic natures. In this manuscript, we discovered that the acid-modified highly conductive organic PEDOT:PSS film shows interesting plasmonic properties in the vis-NIR region and exhibits great potentials for activating surface plasmon polaritons. The dispersion curves of dielectric permittivity and optical constants of two modified PEDOT:PSS samples are obtained by inversion calculation of the spectroscopic ellipsometry data with the Drude-Lorentz dispersion model. The permittivity crossover wavelengths λC and the surface plasmon wavelengths λsp are found to be located squarely in the 650-900 nm range, which will enable future plasmonic device applications in the vis-NIR region. The activation of surface plasmon polaritons propagation mode of modified PEDOT:PSS is directly observed and confirmed by prism coupling experiments. In addition, further quantitative analysis revealed that our modified PEDOT:PSS samples have comparable abilities to generate, propagate, and confine surface plasmon polaritons as indium tin oxide (ITO). To the best of our knowledge, this is the first direct demonstration of an organic structure showing equivalent plasmonic properties to the inorganic ones. We believe it will open up much more possibilities for the optoelectronic devices, due to the flexibility, lightness, biological compatibility, and solution processability of the organic plasmonic materials.

A Hallmark-Based Six-Gene Expression Signature to Assess Colorectal Cancer and Its Recurrence Risk.

Purpose: As part of the effort to establish a general profile for solid tumors, the aim of this study was to develop a real-time polymerase chain reaction (RT-PCR)-based assay to assess colorectal cancer (CRC) and its recurrence risk utilizing the limited amounts of tissues available from biopsies through colonoscopy. Materials and Methods: Six candidate genes, reflecting the hallmarks of cancer cells, were identified by analyzing the gene expression profiles of primary invasive tumors in the public database. The expression of these genes in CRC and noncancerous colon tissues was quantified by RT-quantitative PCR. Classifiers were then generated to distinguish the tumors from the normal colon tissues, and to assess the risk of CRC recurrence based on the disease-free survival time, overall survival time, and metastatic status of the patients. Results: The expression profile of a five-gene panel was utilized to build a model that is capable of distinguishing CRC cancer tissues from noncancerous colorectal tissues (p < 0.0001). A classifier based on the expression signature of four genes, three of which were included in the five-gene panel, was then developed for assessing the tumor recurrence risk. This classifier could correctly identify those with a poor likelihood of survival (high risk of recurrence) >80% of time. There was a significant difference in disease-free survival time between patients in the low recurrence group and those in the high-risk group. Conclusion: The expression signatures of the six genes that reflect the genetic hallmarks of cancer cells could serve as a biomarker for identifying CRC and assessing the risk of recurrence with high sensitivity and specificity.

CMOS-Compatible Antimony-Doped Germanium Epilayers for Mid-Infrared Low-Loss High-Plasma-Frequency Plasmonics.

Antimony (Sb) heavily-doped germanium (Ge)-on-silicon (Si) epitaxial films are investigated as mid-infrared (MIR) plasmonic materials. Structural, electrical, and optical properties have been improved by proper choice of dopant species (i.e., Sb) and optimization of the growth parameters (i.e., Sb flux and substrate temperature). The increased electron conductivity can be attributed to the elevated carrier concentration (1.5 × 1020 cm-3) and carrier mobility (224 cm2 V-1 s-1) in the Sb-doped Ge epilayers. The measured MIR reflectivities of the Sb-doped Ge films show free-carrier-dependent properties, which leads to tunable real and imaginary parts of permittivities. Localized surface plasmon polaritons of the bowtie antennas fabricated from the Sb-doped Ge films are demonstrated. The fabricated antennas can provide signal enhancement for the molecular vibrational spectroscopy when these vibrational lines are spectrally in proximity to the localized plasmon resonance. These CMOS-compatible Sb-doped Ge epilayers offer a platform to study the interaction of MIR plasmon with nanostructures on chips.

Large optical nonlinearity of ITO/Ag/ITO sandwiches based on Z-scan measurement.

Indium tin oxide (ITO)-based sandwich structures with the insertion of silver (ITO/Ag/ITO) show large nonlinear optical enhancement of both nonlinear refraction and saturable absorption. Here optical nonlinearity is measured using a Z-scan experiment with a 1310 nm pulsed laser at normal incidence. The nonlinear refractive index (n2=15.43×10-16 m2/W) for an ITO/Ag/ITO sandwich with a 14 nm silver interlayer and the nonlinear absorption coefficient (ß=-648×10-11 m/W) for an ITO/Ag/ITO sandwich with a 10 nm silver interlayer are about 18 and 16 times greater than that of a single-layer ITO, respectively. Meanwhile, a large figure of merit and modulation depth values hinted that ITO/Ag/ITO sandwiches are promising saturable absorber materials to switch continuous laser waves into laser pulses. These novel nonlinear optical properties make ITO/Ag/ITO sandwiches a promising candidate for all-optical modulation devices at optical communication wavelengths.

Human papillomavirus DNA, HPV L1 capsid protein and p16INK4a protein as markers to predict cervical lesion progression.

OBJECTIVES: Cervical cancer is the most common malignant tumors in women leading to serious morbidity and mortality worldwide, especially among developing countries. A main cause of the disease is the high-risk human papillomavirus (HR-HPV) infection. HSIL usually progress to cervical cancer, and low-grade lesions, including LSIL and ASCUS, mostly turn to normal or benign lesions, but there are still a small number of patients who will progress to HSIL. Up to now there is no efficient biomarker clinically available to predict people with high risk to progress into HSIL. This study was conducted to evaluate the value of human papillomavirus (HPV) DNA, p16INK4a protein, and HPV L1 capsid protein in predicting HSIL and minimizing unnecessary colposcopy treatments. METHODS: 1222 patients with HR-HPV infection or with abnormal Thinprep cytologic test (TCT) were chosen to conduct colposcopy in the cervical out-patient clinic of Shanghai First Maternity and Infant Hospital affiliated to Shanghai Tongji University from June 2014 to January 2017. TCT, cervical biopsy, HPV DNA and HPVL1 were performed on all patients. 110 patients were selected to detect p16INK4a protein. Hybrid capture 2 (HC-2) was used to detect HPV DNA, and their subgroups using gene typing system. Immunohistochemical technology was used to detect HPV L1 and p16. RESULTS: HPV DNA was positive in 1097 cases, with the positive rate of 89.7% (1097/1222). In particular, the positive expression rates of HPV DNA were 82.3, 95.7, 96.6 and 100% in Normal/CC, LSIL, HSIL and cervical cancer groups, respectively (p < 0.001). HPV L1 was negative in 781 cases with HR-HPV infection, and the overall negative rate is 71.1%. In patients with Normal/CC, LSIL and HSIL, the negative expression rates of HPV L1 were 91.3, 40 and 81.2%, respectively (p value < 0.001). In the 110 patients, HPV L1 was negative in 98.1% (53/54) of Normal/CC, 42.9% (12/28) of LSIL and 85.1% (23/27) of HSIL (p value = 0.0043). P16-positive rates in patients with Normal/CC, LSIL and HSIL were 33.3% (18/54), 75% (21/28) and 96.2% (26/27), respectively (p value < 0.001). 18 out of 28 cases express low positive (+) in LSIL, 25 out of 27 cases express strong positive (3+) in HSIL. Patients with L1(-) p16(+) including 18.5% (10/54) of normal/cervicitis, 60.7% (17/28) of LSIL and 85.1% (23/27) of HSIL (p value < 0.005). Furthermore, patients with L1(-) p16(1+) included 37% (10/27) of normal/cervicitis 59.3% (16/27) of LSIL and 3.7% (1/27) of HSIL; patients with L1(-) p16(2+) consisted of 0% of normal/cervicitis/LSIL and 100% (1/1) of HSIL; patients with L1(-) p16(3+) were composed of 0% of normal/cervicitis, 4.5% (1/22) of LSIL and 95.5% (21/22) of HSIL (p value < 0.005) (Table 6). CONCLUSION: With the increase in the degree of the cervical lesions, the expression of HPV DNA and p16 is up-regulated while HPV L1 protein is down-regulated. HPV DNA, HPV L1 and p16 are useful markers for the prediction of HSIL. Combined detection of these three markers has important potential to predicting HSIL and minimizing unnecessary colposcope examination.

Deletion of PBP1a/LpoA complex compromises cell envelope integrity in Shewanella oneidensis.

High molecular weight penicillin-binding proteins (PBPs) are responsible for the biosynthesis of peptidoglycan. In Escherichia coli, PBP1a and PBP1b form multienzyme peptidoglycan-synthesizing complexes with outer membrane lipoproteins LpoA and LpoB, respectively. The two complexes appear to be largely redundant, although their distinct physiological roles remain unclear. PBP1a/LpoA and PBP1b/LpoB also exist in Shewanella oneidensis strain MR-1, but effects of the two complexes on aerobic growth and ß-lactam resistance are quite different. In this study, the phenotypes of strains lacking a certain complex in S. oneidensis were compared. Deletion of PBP1a/LpoA caused aberrant cell morphology (including branches and bulges), enhanced sensitivity to various envelope stresses and outer membrane permeability. On the contrary, strains lacking PBP1b/LpoB displayed phenotypes similar to the wild type.

ITO-TiN-ITO Sandwiches for Near-Infrared Plasmonic Materials.

Indium tin oxide (ITO)-based sandwich structures with the insertion of ultrathin (<10 nm) titanium nitride (TiN) are investigated as near-infrared (NIR) plasmonic materials. The structural, electrical, and optical properties reveal the improvement of the sandwich structures stemmed from TiN insertion. TiN is a well-established alternative to noble metals such as gold, elevating the electron conductivity of sandwich structures as its thickness increases. Dielectric permittivities of TiN and top ITO layers show TiN-thickness-dependent properties, which lead to moderate and tunable effective permittivities for the sandwiches. The surface plasmon polaritons (SPP) of the ITO-TiN-ITO sandwich at the telecommunication window (1480-1570 nm) are activated by prism coupling using Kretschmann configuration. Compared with pure ITO films or sandwiches with metal insertion, the reflectivity dip for sandwiches with TiN is relatively deeper and wider, indicating the enhanced coupling ability in plasmonic materials for telecommunications. The SPP spatial profile, penetration depth, and degree of confinement, as well as the quality factors, demonstrate the applicability of such sandwiches for NIR plasmonic materials in various devices.

Tunable near-infrared epsilon-near-zero and plasmonic properties of Ag-ITO co-sputtered composite films.

Series of co-sputtered silver-indium tin oxide (Ag-ITO) films are systematically fabricated. By tuning the atomic ratio of silver, composite films are manifested to have different microstructures with limited silver amount (<3 at.%). Two stages for film morphology changing are proposed to describe different status and growth mechanisms. The introduction of silver improves the preferred orientations of In2O3 component significantly. Remarkably, dielectric permittivity of Ag-ITO films is highly adjustable, allowing the cross-over wavelengths λc to be changed by more than 300 nm through rapid post-annealing, and thus resulting in tunable epsilon-near-zero and plasmonic properties in the near-infrared region. Lower imaginary permittivity compared with pure metal films, as well as larger tunability in λc than pure ITO films suggest the potentiality of Ag-ITO films as substituted near-infrared plasmonic materials. Extended Maxwell-Garnett model is applied for effective medium approximation and the red-shifting of epsilon-near-zero region with the increase of silver content is well-fitted. Angle-variable prism coupling is carried out to reveal the surface plasmon polariton features of our films at optical communication wavelength. Broad dips in reflectance curves around 52-56° correspond to the SPP in Ag-ITO films.

Endometrial receptivity and conception outcome among women with light menstrual bleeding of unidentified etiology.

OBJECTIVE: To investigate endometrial receptivity (ER), conception outcome, and other factors among women with light menstrual bleeding of unidentified etiology. METHODS: A prospective study was undertaken at a center in China. Between January 1, 2011, and December 31, 2014, women meeting the inclusion criteria (aged 20-35 years, without any history of pregnancy, desire to conceive, follicle-stimulating hormone <10 IU on second or third day of cycle, and regular menstrual periods) were enrolled. Participants with a menstrual blood volume of 5-20 mL formed the study group; others were in the control group. ER measures were obtained by transvaginal Doppler ultrasonography. Serum estradiol and progesterone levels were measured and items of prethrombotic state were screened in mid-luteal phase. Participants were followed up for 1 year to establish conception outcome. RESULTS: The ER (Salle) score was significantly lower in the study group (n=110) than in the control group (n=330; 9.41 ± 3.02 vs 15.67 ± 2.63, P<0.001). The natural rate of conception within 1 year was lower (60.0% [63/105] vs 72.1% [230/319], P=0.020), and the spontaneous abortion rate in early pregnancy was higher (34.4% [21/61] vs 18.1% [41/227], P=0.006) in the study group than in the control group. CONCLUSION: Women with light menstrual bleeding of unidentified etiology had an increased prevalence of low ER and poor conception outcome.

Optical constants acquisition and phase change properties of Ge2Sb2Te5 thin films based on spectroscopy.

In this work, phase change chalcogenide Ge2Sb2Te5 (GST) thin films were fabricated by magnetron sputtering. The optical properties, especially the optical constants (refractive index and extinction coefficient), of such alloys were systematically studied by investigating their thermally and photo-thermally induced switching between different phases. The results show that GST films are highly tunable in microstructure and optical constants, either by post-annealing at 160 °C, 200 °C, 250 °C and 350 °C, respectively, or by laser irradiation of 1 mW, 3 mW, 5 mW and 10 mW power with beam diameter of 7 µm at 532 nm, respectively. From the structural analysis, we can clearly observe different crystallinities and chemical bonding in the different post-treated GST films. The optical constants of GST films under various phases were obtained from spectrophotometry, by fitting their transmittance data with the Tauc-Lorentz (TL) dispersion model. The refractive index and extinction coefficient exhibit notable change upon annealing and laser irradiation, specifically at 1550 nm, from 3.85 (amorphous) to 6.5 (crystalline) in refractive index. The optical constants have been proved capable of fine tuning via the laser irradiation method. Hence, the pronounced adjustability in optical properties due to rapid and repeatable phase change render GST suitable for tunable photonic devices.

Analysis of light-emission enhancement of low-efficiency quantum dots by plasmonic nano-particle.

In this paper, a nano-pillar array integrated near quantum dots (QDs), which serves as a Purcell cavity as well as a column antenna, is studied in order to enhance the spontaneous emission (SE) rate of low emission efficiency QDs. A systematic analysis for treating the isolated nano-pillar and loose ordered pillar is demonstrated by solving the electromagnetic field equations. As an illustrative example of potential applications, we proposed a new structure that Germanium (Ge) QDs are located in close proximity to the isolated Indium Tin Oxide (ITO) nano-pillar to raise its efficiency. From the results of numerical calculation, it is predicted that ITO pillars with slim (e.g., the radius is 25 nm and the height is 500 nm) and flat morphology (e.g., the radius is 40 nm and the height is 60 nm) exhibit superior enhancement over 20 folds. Finite difference time domain (FDTD) simulation is utilized for demonstrating the distinctive enhancement when QDs radiate at surface plasmonic resonance frequency of ITO nano-pillar. It can be found that the QDs emission enhancement profile accords with our results obtained from numerical analysis.

Pulsed laser deposited indium tin oxides as alternatives to noble metals in the near-infrared region.

Transparent conductive indium tin oxide thin films with thickness around 200 nm were deposited on glass substrates by pulsed laser deposition technology. The microstructure and the electrical and optical properties of the ITO films deposited under different oxygen pressures and substrate temperatures were systematically investigated. Distinct different x-ray diffraction patterns revealed that the crystallinity of ITO films was highly influenced by deposition conditions. The highest carrier concentration of the ITO films was obtained as 1.34 × 10(21) cm(-3) with the lowest corresponding resistivity of 2.41 × 10(-4) Ω cm. Spectroscopic ellipsometry was applied to retrieve the dielectric permittivity of the ITO films to estimate their potential as plasmonic materials in the near-infrared region. The crossover wavelength (the wavelength where the real part of the permittivity changes from positive to negative) of the ITO films exhibited high dependence on the deposition conditions and was optimized to as low as 1270 nm. Compared with noble metals (silver or gold etc), the lower imaginary part of the permittivity (<3) of ITO films suggests the potential application of ITO in the near-infrared range.