Post-modification of covalent organic framework functionalized aminated carbon nanotubes with active site (Fe) for the sensitive detection of luteolin.

In this research, the TT-COF(Fe)@NH2-CNTs was innovatively prepared through a post-modification synthetic process functionalized TT-COF@NH2-CNTs with active site (Fe), where TT-COF@NH2-CNTs was prepared via a one-pot strategy using 5,10,15,20-tetrakis (para-aminophenyl) porphyrin (TTAP), 2,3,6,7-tetra (4-formylphenyl) tetrathiafulvalene (TTF) and aminated carbon nanotubes (NH2-CNTs) as raw materials. The complex TT-COF(Fe)@NH2-CNTs material possessed porous structures, outstanding conductivity and rich catalytic sites. Thus, it can be adopted to construct electrochemical sensor with glassy carbon electrode (GCE). The TT-COF(Fe)@NH2-CNTs/GCE can selectively detect luteolin (Lu) with a wide linear plot ranging from 0.005 to 3 µM and a low limit of detection (LOD) of 1.45 nM (S/N = 3). The Lu residues in carrot samples were determined using TT-COF(Fe)@NH2-CNTs sensor and UV-visible (UV-Vis) approach. This TT-COF(Fe)@NH2-CNTs/GCE sensor paves the way for the quantification of Lu through a cost-efficient and sensitive electrochemical approach, which can make a significant step in the sensing field based on crystalline COFs.

Long-term stable electrochemiluminescence of perovskite quantum dots in aqueous media.

We develop a novel electrochemiluminescence (ECL) emitter of aqueous-based perovskite quantum dots, with long-term stable ECL emission in aqueous media. Moreover, an electron transfer annihilation mechanism of ECL generation is proposed, revealed by the experimental results. This study opens a door for exploring efficient perovskite-based ECL emitters.

Discovery of molecular ferroelectric catalytic annulation for quinolines.

Ferroelectrics as emerging and attractive catalysts have shown tremendous potential for applications including wastewater treatment, hydrogen production, nitrogen fixation, and organic synthesis, etc. In this study, we demonstrate that molecular ferroelectric crystal TMCM-CdCl3 (TMCM = trimethylchloromethylammonium) with multiaxial ferroelectricity and superior piezoelectricity has an effective catalytic activity on the direct construction of the pharmacologically important substituted quinoline derivatives via one-pot [3 + 2 + 1] annulation of anilines and terminal alkynes by using N,N-dimethylformamide (DMF) as the carbon source. The recrystallized TMCM-CdCl3 crystals from DMF remain well ferroelectricity and piezoelectricity. Upon ultrasonic condition, periodic changes in polarization contribute to the release of free charges from the surface of the ferroelectric domains in nano size, which then quickly interacts with the substrates in the solution to trigger the pivotal redox process. Our work advances the molecular ferroelectric crystal as a catalytic route to organic synthesis, not only providing valuable direction for molecular ferroelectrics but also further enriching the executable range of ferroelectric catalysis.

Palladium-Catalyzed Reaction of Indolines with Dihydropyrroles: Access to N-Alkylated Indoles.

Palladium-catalyzed reaction of indolines with 1-acyl-2,3-dihydro-1H-pyrroles or 1-acyl-2,5-dihydro-1H-pyrroles in air produces N-alkylated indoles. A combination of Pd(CH3CN)2Cl2 and dppf effectively catalyzes the reaction of 1-acyl-2,3-dihydro-1H-pyrroles, and the combination of Pd(CH3CN)2Cl2 and dcypf is more effective for the reaction of 1-acyl-2,5-dihydro-1H-pyrroles. The method has a wide scope of substrates and shows good compatibility of functional groups.

Hypervalent Iodine Promoted Selective [2 + 2 + 1] Cycloaddition of Aromatic Ketones and Methylamines: A One-Pot Access to 1-Pyrrolines.

Herein, a versatile highly regioselective three-component annulation of simple aromatic ketones and methylamines using a hypervalent iodine reagent for polyarylated 1-pyrrolines has been described in good to excellent yields. Meanwhile, unsymmetrical 1-pyrroline isomers could be realized and synthesized. Such an intriguing one-pot two-step tandem assembly strategy with green conditions and high regioselectivity shows predictable inspiration in related annulation reactions.

Acid-mediated strategies designed for stretchable and durable polyacrylamide/sodium alginate dual-network hydrogels toward flexible capacitors and wearable sensors.

The utilization of acid as a synthesis assistant provides an effective means to regulate the structure of hydrogels, thereby simplifying the design and preparation process of multifunctional hydrogels. However, there remains a dearth of discourse concerning the utilization of this convenient acid-mediated strategy, which possesses the potential to directly govern molecular interactions within gel networks for rational structure and property design. Herein, we describe the preparation of flexible dual-network conductive hydrogels using polyacrylamide (PAM) and sodium alginate (SA) as substrates, driven by the strategy of acid-mediated (HCI, H2SO4, and H2C2O4) in detail for the first time. Especially, the structure-activity relationship of hydrogels was elucidated through a comparative analysis of molecular dynamics (MD) simulations and empirical properties, thereby enhancing the understanding of this field. Furthermore, extensive investigations have been conducted to explore the distinct impacts of acid ions and concentrations. The acid-mediated method exhibits superior versatility and operability compared to the filler modification method, thereby enabling a more convenient acquisition of conductive and robust hydrogels suitable for flexible capacitors and wearable sensors. Consequently, this study presents a straightforward, efficient, and cost-effective universal strategy for targeted functional hydrogel design.

A MELET- and IFE-based UV-visible luminescent ratiometric probe for quantization of mercury(II) and nitrofurantoin in environmental sewage.

A novel fluorimetric ratiometric probe of green and eco-friendily nitrogen-enriched, oxygen-doped carbon nanodots (Cnanodots) was prepared for the quantitative analysis of mercury(II) (HgII) and nitrofurantoin (Nit) in the environmental sewage. The Cnanodots exhibits dual-emission peaks respectively at 345 and 445 nm under 285 nm excitation, with excitation-independent properties. Unexpectedly, this Cnanodots displays two obvious ratiometric responses to HgII and Nit through decreasing the signal at 345 nm and remaining invariable at 445 nm. Experimental results confirm that the highly sensitive analysis of HgII and Nit are achieved respectively based on matching energy-level electron transfer and inner filter effect mechanisms. The fluorescence (FL) ratiometric intensity of [FL345nm/FL445nm] expresses a good linear relationship with the concentration of HgII in the scope of 0.01-20 µM, while the logarithm of [Log(FL0345nm-FL345nm)] on the quenching degree of the probe by Nit also shows a good linear correlation within the range of 0.01-100 µM. The detection limits were calculated to be 4.14 nM for HgII, and 7.84 nM for Nit. Moreover, recovery experiments of Cnanodots for HgII and Nit sensing in real sewage samples obtained satisfactory results, comfirming the feasibility of practical application.

Interfacial Hydrogen-Bond Interactions Driven Assembly toward Polychromatic Copper Nanoclusters.

Constructing versatile metal nanoclusters (NCs) assemblies through noncovalent weak interactions between inter-ligands is a long-standing challenge in interfacial chemistry, while compelling interfacial hydrogen-bond-driven metal NCs assemblies remain unexplored so far. Here, the study reports an amination-ligand o-phenylenediamine-coordinated copper NCs (CuNCs), demonstrating the impact of interfacial hydrogen-bonds (IHBs) motifs on the luminescent behaviors of metal NCs as the alteration of protic solvent. Experimental results supported by theoretical calculation unveil that the flexibility of interfacial ligand and the distance of cuprophilic CuI···CuI interaction between intra-/inter-NCs can be tailored by manipulating the cooperation between the diverse IHBs motifs reconstruction, therewith the IHBs-modulated fundamental structure-property relationships are established. Importantly, by utilizing the IHBs-mediated optical polychromatism of aminated CuNCs, portable visualization of humidity sensing test-strips with fast response is successfully manufactured. This work not only provides further insights into exploring the interfacial chemistry of NCs based on inter-ligands hydrogen-bond interactions, but also offers a new opportunity to expand the practical application for optical sensing of metal NCs.

Ruthenium-catalyzed C-H functionalization of indoles and indolines with 7-azabenzonorbornadienes: access to aminodihydronaphthyl indoles and indolines.

Indoles, indolines and hydronaphthylamines are ubiquitous structural motifs in natural products, pharmaceuticals, and biologically active molecules. In this paper, we report the synthesis of aminodihydronaphthyl-substituted indoles and indolines via a Ru-catalyzed carbamoyl-directed C-H functionalization of indoles and indolines with 7-azabenzonorbornadienes. In the presence of Cu(OAc)2 and AgSbF6, [Ru(p-cymene)Cl2]2 catalyzes the reaction of 1-carbamoylindoles with 7-azabenzonorbornadienes to produce 2-(1-amino-1,2-dihydronaphthalen-2-yl)indoles. Under the same conditions, the reaction of 1-carbamoylindolines with 7-azabenzonorbornadienes affords 7-(1-amino-1,2-dihydronaphthalen-2-yl)indolines. In both cases, the reactions yield cis-configured products.

Preparation and utilization of carbon dots as a nanoprobe for sensitive detection of tartrazine and palladium (II).

We prepared novel green, eco-friendly carbon dots as a dual-channel probe for highly sensitive and selective detection of tartrazine (Trz) and palladium(II) (Pd(II)) involving, respectively, FRET and electron transfer mechanisms. Furthermore, the successful utilization of the carbon dots for detecting Trz and Pd(II) in actual samples implies its potential application prospects in analysis.

Pincer Nickel-Catalyzed Olefination of Alcohols with Benzylphosphine Oxides.

N,N,P-Pincer nickel complexes effectively catalyze reaction of alcohols with benzylphosphine oxides to form alkenes in good yields. The protocol suits for a wide scope of substrates and generates only E-configurated alkenes. The method also shows good compatibility of functional groups. Methoxy, methylthio, trifluoromethyl, ketal, fluoro, chloro, bromo, thienyl, and furyl groups are tolerated. The mechanism studies support that the reaction proceeds through catalytic dehydrogenation of alcohols to aldehydes or ketones followed by condensation with benzyldiphenylphosphine oxides in the presence of KOtBu.

Logic Signal Amplification System for Sensitive Electrochemiluminescence Detection and Subtype Identification of Cancer Cells.

Achieving sensitive detection and accurate identification of cancer cells is vital for diagnosing and treating the disease. Here, we developed a logic signal amplification system using DNA tetrahedron-mediated three-dimensional (3D) DNA nanonetworks for sensitive electrochemiluminescence (ECL) detection and subtype identification of cancer cells. Specially designed hairpins were integrated into DNA tetrahedral nanostructures (DTNs) to perform a catalytic hairpin assembly (CHA) reaction in the presence of target microRNA, forming hyperbranched 3D nanonetworks. Benefiting from the "spatial confinement effect," the DNA tetrahedron-mediated catalytic hairpin assembly (DTCHA) reaction displayed significantly faster kinetics and greater cycle conversion efficiency than traditional CHA. The resulting 3D nanonetworks could load a large amount of Ru(phen)32+, significantly enhancing its ECL signal, and exhibit detection limits for both miR-21 and miR-141 at the femtomolar level. The biosensor based on modular logic gates facilitated the distinction and quantification of cancer cells and normal cells based on miR-21 levels, combined with miR-141 levels, to further identify different subtypes of breast cancer cells. Overall, this study provides potential applications in miRNA-related clinical diagnostics.

Rh(III)-Catalyzed C-H Allylation of Aromatic Ketoximes with Vinylaziridines.

The Rh(III)-catalyzed reaction of aromatic ketoximes with 2-vinylaziridines affords ortho-allylation products of the phenyl rings of aromatic ketoximes in moderate to excellent yields. The reaction requires 0.5 equiv of NaOAc as a base and occurs under mild conditions. The protocol exhibits ortho-monoallylation selectivity, wide scope of substrates, and good compatibility of functional groups.

Selective identification of p-nitroaniline by bromine-mediated polarization of carbon dots.

A fluorometric method based on boron, bromide-codoped carbon dots (BBCNs) was developed for the first time for the highly selective detection of p-nitroaniline (PNA) in wastewater samples. It should be noted that the introduction of bromine greatly increases the molecular polarizability of the probe, which can regulate the energy level matching between the probe and PNA, resulting in the interaction between BBCNs and PNA. In the presence of PNA, the fluorescence of BBCNs is obviously quenched and accompanied by a red shift of the fluorescence band, which might be attributed to the formation of aggregates caused by the polar adsorption of BBCNs and PNA. It is beneficial for constructing a highly selective sensing platform for PNA determination compared to its isomers (o-nitroaniline and m-nitroaniline) through atomic bromine-mediated polarization of the BBCNs. With the help of this mechanism, an excellent linear range of 0.5-300 µM with a low detection limit of 0.24 µM toward PNA was obtained. This work further confirms that there is a significant relationship between the nature of doping elements and the optical and physicochemical properties of fluorescent materials.

A Homochiral Fulgide Organic Ferroelectric Crystal with Photoinduced Molecular Orbital Breaking.

Thermally triggered spatial symmetry breaking in traditional ferroelectrics has been extensively studied for manipulation of the ferroelectricity. However, photoinduced molecular orbital breaking, which is promising for optical control of ferroelectric polarization, has been rarely explored. Herein, for the first time, we synthesized a homochiral fulgide organic ferroelectric crystal (E)-(R)-3-methyl-3-cyclohexylidene-4-(diphenylmethylene)dihydro-2,5-furandione (1), which exhibits both ferroelectricity and photoisomerization. Significantly, 1 shows a photoinduced reversible change in its molecular orbitals from the 3 π molecular orbitals in the open-ring isomer to 2 π and 1 σ molecular orbitals in the closed-ring isomer, which enables reversible ferroelectric domain switching by optical manipulation. To our knowledge, this is the first report revealing the manipulation of ferroelectric polarization in homochiral ferroelectric crystal by photoinduced breaking of molecular orbitals. This finding sheds light on the exploration of molecular orbital breaking in ferroelectrics for optical manipulation of ferroelectricity.

Ruthenium(II)-Catalyzed S(II)-Directed Aromatic C-H Allylation with Vinylaziridines.

The ruthenium-catalyzed reaction of aryl methyl thioethers with vinylaziridines affords ortho-position mono- or bis-allylation products depending on substituents on the phenyl rings of sulfide substrates or the ratio of reactants. The reaction also features mild reaction conditions, good product yields, wide scope of substrates, good compatibility of functional groups, and the selective formation of E-configurated C-C double bonds.

A single-site porphyrin (Cu)-based COF electrocatalyst for the electrochemical detection of gallic acid sensitively.

Sensitive and convenient determination of gallic acid (GA) is vital for food safety. Here, a novel porphyrin (Cu)-based covalent organic framework named as COF(Cu) was successfully synthesized by condensing pre-metalated 5,10,15,20-tetrakis (para-aminophenyl) porphyrin copper (II) and 2,3,6,7-tetra (4-formylphenyl) tetrathiafulvalene ligands. By combining the advantages of porphyrin with tetrathiafulvalene, it may be possible to create a COF with an intrinsically effective charge-transfer channel. In addition, the Cu-N4 type in the COF(Cu) can be regarded as the single-site electrocatalyst. Benefiting from these advantages, the COF(Cu) based electrochemical sensor demonstrated outstanding response to gallic acid (GA). Under the optimal conditions by square wave voltammetry technique, the COF(Cu) modified electrode showed a wide linear range (0.01-1000 µM), a low detection limit (2.81 nM), good reproducibility, acceptable selectivity as well as high stability. Moreover, the established approach was adopted to detect GA in real tea samples with good recoveries, indicating that the COF(Cu) based electrochemical sensor may pave the way for the application in food analysis.

Synthesis of functionalized tetrahydrodibenzo[b,g][1,8]naphthyridin-1(2H)-ones through base-promoted annulation of quinoline-derived dipolarophiles and cyclic enaminones.

An eco-friendly and metal-free method for the synthesis of tetrahydrodibenzo[b,g][1,8]naphthyridin-1(2H)-ones was established. Quinoline-derived dipolarophiles and cyclic enaminones as starting materials undergo a 1,4-Michael addition/SNAr tandem annulation reaction affording the target products. This approach features transition metal-free conditions, good functional group tolerance and operational simplicity.

An eco-friendly fluorometric assay for high-sensitive meloxicam quantitation in biological matrices.

Meloxicam (Mel), as a powerful and effective anti-inflammatory drug, is commonly employed for the treatment of various inflammatory diseases; however, the use of Mel at high doses or for extended periods could cause severe side effects in human visceral organs. Therefore, a simple, rapid, and reliable method is urgently needed to monitor Mel in biological samples. Herein, novel water-soluble luminescent nano-carbon dots (nano-Cdots) with outstanding physicochemical properties were prepared by a one-pot high-temperature hydrothermal process of ellagic acid and guanidine. The nano-Cdots were further used as an optical probe for the sensitive detection of Mel in serum samples through the cooperative mechanisms of the inner filter effect and photoelectron transfer. By employing this sensor, an excellent linear correlation was achieved between the relative luminescent intensity [(PL0 - PL)/PL0] and the concentration of Mel in the range of 0.1 to 200 µM, with a limit of detection of 34.68 nM (3σ/k). This sensor was effectively employed for the analysis of Mel in real serum samples, implying its potential development prospects for the advancement of drug analysis with carbon-based probes.

Large Phase-Transition Temperature Enhancement Achieved in a Layered Lead Iodide Hybrid Crystal by H/F Substitution.

Organic-inorganic hybrid metal halides with structural flexibility and solution processability have been widely investigated for different application scenarios. However, the effective construction of phase-transition materials with a high phase-transition temperature (Ttr) for potential practical applications remains a great challenge, and reports on the regulation of Ttr with significant enhancement have been rare. In this manuscript, we have realized a large Ttr increase of 148 K in a layered hybrid lead iodide crystal (4-FTMBA)4Pb3I10 (4-FTMBA = 4-fluoro-N,N,N-trimethylbenzenaminium) by the H/F substitution strategy. Compared to the parent (TMBA)4Pb3I10 (TMBA = N,N,N-trimethylbenzenaminium), H/F substitution preserves the structural framework and crystal symmetry in (4-FTMBA)4Pb3I10. The introduction of heavier fluorine will significantly increase the motion barrier for the order-disorder transition, resulting in the remarkably improved Ttr. Temperature-dependent crystal structures, Raman spectra, and dielectric analyses well support the phase-transition behavior. In addition, evident thermochromism with a tunable direct band gap in (4-FTMBA)4Pb3I10 has been observed using UV-vis spectra. To the best of our knowledge, the achieved Ttr enhancement of 148 K by H/F substitution is the highest among the organic-inorganic hybrid lead halide phase-transition materials. This finding would greatly inspire the rational design of functional materials with high performance.