RESUMEN
Photo-dissolution, the photochemical production of water-soluble species from oil, can transfer oil-derived dissolved organic carbon (DOC) from floating surface slicks to the underlying seawater. Photo-dissolution was likely a quantitatively relevant fate process for the Macondo crude oil spilled during the 2010 Deepwater Horizon spill, but the importance of photo-dissolution for other oils is poorly constrained. This study evaluated the photo-dissolution reactivities (apparent quantum yields) and modeled rates for oils with diverse physical properties and chemical compositions, including an ultra low sulfur fuel oil (ULSFO). Photo-dissolution from UV (310 nm) light was strongly positively correlated with the fraction of small, gas-oil range compounds (
RESUMEN
While plastic pollution threatens ecosystems and human health, the use of plastic products continues to increase. Limiting its harm requires design strategies for plastic products informed by the threats that plastics pose to the environment. Thus, we developed a sustainability metric for the ecodesign of plastic products with low environmental persistence and uncompromised performance. To do this, we integrated the environmental degradation rate of plastic into established material selection strategies, deriving material indices for environmental persistence. By comparing indices for the environmental impact of on-the-market plastics and proposed alternatives, we show that accounting for the environmental persistence of plastics in design could translate to societal benefits of hundreds of millions of dollars for a single consumer product. Our analysis identifies the materials and their properties that deserve development, adoption, and investment to create functional and less environmentally impactful plastic products.
Asunto(s)
Academia , Contaminación Ambiental , Industrias , Plásticos , Academia/organización & administración , Contaminación Ambiental/legislación & jurisprudencia , Contaminación Ambiental/prevención & control , Industrias/organización & administración , Plásticos/análisis , Plásticos/provisión & distribuciónRESUMEN
IMPORTANCE: Cellulose diacetate (CDA) is a promising alternative to conventional plastics due to its versatility in manufacturing and low environmental persistence. Previously, our group demonstrated that CDA is susceptible to biodegradation in the ocean on timescales of months. In this study, we report the composition of microorganisms driving CDA degradation in the coastal ocean. We found that the coastal ocean harbors distinct bacterial taxa implicated in CDA degradation and these taxa have not been previously identified in prior CDA degradation studies, indicating an unexplored diversity of CDA-degrading bacteria in the ocean. Moreover, the shape of the plastic article (e.g., a fabric, film, or foam) and plasticizer in the plastic matrix selected for different microbial communities. Our findings pave the way for future studies to identify the specific species and enzymes that drive CDA degradation in the marine environment, ultimately yielding a more predictive understanding of CDA biodegradation across space and time.
Asunto(s)
Microbiota , Plásticos , Biopolímeros , Bacterias/genética , Biodegradación Ambiental , Océanos y MaresRESUMEN
Photochemical weathering transforms petroleum oil and changes its bulk physical properties, as well as its partitioning into seawater. This transformation process is likely to occur in a cold water marine oil spill, but little is known about the behavior of photochemically weathered oil in cold water. We quantified the effect of photochemical weathering on oil properties and partitioning across temperatures. Compared to weathering in the dark, photochemical weathering increases oil viscosity and water-soluble content, decreases oil-seawater interfacial tension, and slightly increases density. Many of these photochemical changes are much larger than changes caused by evaporative weathering. Further, the viscosity and water-soluble content of photochemically weathered oil are more temperature-sensitive compared to evaporatively weathered oil, which changes the importance of key fate processes in warm versus cold environments. Compared to at 30 °C, photochemically weathered oil at 5 °C would have a 16× higher viscosity and a 7× lower water-soluble content, resulting in lower entrainment and dissolution. Collectively, the physical properties and thus fate of photochemically weathered oil in a cold water spill may be substantially different from those in a warm water spill. These differences could affect the choice of oil spill response options in cold, high-light environments.
Asunto(s)
Contaminación por Petróleo , Petróleo , Contaminantes Químicos del Agua , Temperatura , Contaminantes Químicos del Agua/análisis , Tiempo (Meteorología) , Agua de Mar/química , AguaRESUMEN
Sunlight transforms plastic into water-soluble products, the potential toxicity of which remains unresolved, particularly for vertebrate animals. We evaluated acute toxicity and gene expression in developing zebrafish larvae after 5 days of exposure to photoproduced (P) and dark (D) leachates from additive-free polyethylene (PE) film and consumer-grade, additive-containing, conventional, and recycled PE bags. Using a "worst-case" scenario, with plastic concentrations exceeding those found in natural waters, we observed no acute toxicity. However, at the molecular level, RNA sequencing revealed differences in the number of differentially expressed genes (DEGs) for each leachate treatment: thousands of genes (5442 P, 577 D) for the additive-free film, tens of genes for the additive-containing conventional bag (14 P, 7 D), and none for the additive-containing recycled bag. Gene ontology enrichment analyses suggested that the additive-free PE leachates disrupted neuromuscular processes via biophysical signaling; this was most pronounced for the photoproduced leachates. We suggest that the fewer DEGs elicited by the leachates from conventional PE bags (and none from recycled bags) could be due to differences in photoproduced leachate composition caused by titanium dioxide-catalyzed reactions not present in the additive-free PE. This work demonstrates that the potential toxicity of plastic photoproducts can be product formulation-specific.
Asunto(s)
Polietileno , Contaminantes Químicos del Agua , Animales , Polietileno/toxicidad , Pez Cebra , Contaminantes Químicos del Agua/toxicidad , Contaminantes Químicos del Agua/análisis , Plásticos/toxicidad , AguaRESUMEN
Molecular weight (MW) is a key control of plastic polymer properties and their fate in the environment. However, the primary tool used to determine plastic MW, gel permeation chromatography (GPC), has major limitations, such as low precision and accuracy, requirements for dedicated instrumentation, production of high volumes of hazardous waste, and large sample sizes. In this study, we describe, validate, and apply a diffusion-ordered spectroscopy (DOSY) method for polymer MW determinations, with a focus on applications for consumer plastics. Several experimental conditions were systematically optimized and tested to validate the DOSY method, including the selection of pulse sequences, the effect of sample concentration, cross-validation with multiple sets of external standards, and long-term instrumental stability. Validation was performed for a wide range of polymers, solvents, and temperatures, highlighting its potential for broad applicability. A preliminary screening of polystyrene and polyethylene terephthalate consumer products revealed widely varying MWs (up to two-fold) for products made of the same polymer type. A preliminary experiment was also conducted to track the decrease in polystyrene MW via photochemical chain scission reactions, finding a 20% reduction in MW after less than 1 week of irradiation. Collectively, our results demonstrate the potential for DOSY to provide high-throughput, accurate, and precise measures of polymer MW, as well as the evolution of polymer MW during environmental weathering processes, such as photochemical degradation. We conclude with a discussion of (i) the many advantages of DOSY compared to GPC, (ii) future developments to enhance the depth of information obtained from DOSY, and (iii) approaches to broaden the accessibility of this promising analytical method to the research community.
RESUMEN
Photo-induced toxicity of petroleum products and polycyclic aromatic compounds (PACs) is the enhanced toxicity caused by their interaction with ultraviolet radiation and occurs by two distinct mechanisms: photosensitization and photomodification. Laboratory approaches for designing, conducting, and reporting of photo-induced toxicity studies are reviewed and recommended to enhance the original Chemical Response to Oil Spills: Ecological Research Forum (CROSERF) protocols which did not address photo-induced toxicity. Guidance is provided on conducting photo-induced toxicity tests, including test species, endpoints, experimental design and dosing, light sources, irradiance measurement, chemical characterization, and data reporting. Because of distinct mechanisms, aspects of photosensitization (change in compound energy state) and photomodification (change in compound structure) are addressed separately, and practical applications in laboratory and field studies and advances in predictive modeling are discussed. One goal for developing standardized testing protocols is to support lab-to-field extrapolations, which in the case of petroleum substances often requires a modeling framework to account for differential physicochemical properties of the constituents. Recommendations are provided to promote greater standardization of laboratory studies on photo-induced toxicity, thus facilitating comparisons across studies and generating data needed to improve models used in oil spill science.
Asunto(s)
Contaminación por Petróleo , Petróleo , Hidrocarburos Policíclicos Aromáticos , Compuestos Policíclicos , Contaminantes Químicos del Agua , Petróleo/toxicidad , Petróleo/análisis , Rayos Ultravioleta , Contaminantes Químicos del Agua/toxicidad , Hidrocarburos Policíclicos Aromáticos/análisis , Compuestos Orgánicos , Contaminación por Petróleo/análisisRESUMEN
Sunlight chemically transforms marine plastics into a suite of products, with formulationâthe specific mixture of polymers and additivesâdriving rates and products. However, the effect of light-driven transformations on subsequent microbial lability is poorly understood. Here, we examined the interplay between photochemical and biological degradation of fabrics made from cellulose diacetate (CDA), a biobased polymer used commonly in consumer products. We also examined the influence of â¼1% titanium dioxide (TiO2), a common pigment and photocatalyst. We sequentially exposed CDA to simulated sunlight and native marine microbes to understand how photodegradation influences metabolic rates and pathways. Nuclear magnetic resonance spectroscopy revealed that sunlight initiated chain scission reactions, reducing CDA's average molecular weight. Natural abundance carbon isotope measurements demonstrated that chain scission ultimately yields CO2, a newly identified abiotic loss term of CDA in the environment. Measurements of fabric mass loss and enzymatic activities in seawater implied that photodegradation enhanced biodegradation by performing steps typically facilitated by cellulase. TiO2 accelerated CDA photodegradation, expediting biodegradation. Collectively, these findings (i) underline the importance of formulation in plastic's environmental fate and (ii) suggest that overlooking synergy between photochemical and biological degradation may lead to overestimates of marine plastic persistence.
Asunto(s)
Celulasas , Luz Solar , Dióxido de Carbono , Isótopos de Carbono , Celulosa/análogos & derivados , Océanos y Mares , Plásticos/química , Polímeros , Titanio/químicaRESUMEN
Crude oil released into the environment undergoes weathering processes that gradually change its composition and toxicity. Co-exposure to petroleum mixtures and other stressors, including ultraviolet (UV) radiation, may lead to synergistic effects and increased toxicity. Laboratory studies should consider these factors when testing the effects of oil exposure on aquatic organisms. Here, we study transcriptomic responses of the estuarine sea anemone Nematostella vectensis to naturally weathered oil, with or without co-exposure to environmental levels of UV radiation. We find that co-exposure greatly enhances the response. We use bioinformatic analyses to identify molecular pathways implicated in this response, which suggest phototoxicity and oxidative damage as mechanisms for the enhanced stress response. Nematostella's stress response shares similarities with the vertebrate oxidative stress response, implying deep conservation of certain stress pathways in animals. We show that exposure to weathered oil along with surface-level UV exposure has substantial physiological consequences in a model cnidarian.
Asunto(s)
Petróleo , Anémonas de Mar , Animales , Organismos Acuáticos , Petróleo/metabolismo , Petróleo/toxicidad , Anémonas de Mar/fisiología , Rayos Ultravioleta , Tiempo (Meteorología)RESUMEN
Oxygenation reactions initiated by sunlight can transform insoluble components of crude oil at sea into water-soluble products, a process called photo-dissolution. First reported a half century ago, photo-dissolution has never been included in spill models because key parameters required for rate modeling were unknown, including the wavelength and photon dose dependence. Here, we experimentally quantified photo-dissolution as a function of wavelength and photon dose, making possible a sensitivity analysis of environmental variables in hypothetical spill scenarios and a mass balance assessment for the 2010 Deepwater Horizon (DwH) spill. The sensitivity analysis revealed that rates were most sensitive to oil slick thickness, season/latitude, and wavelength and less sensitive to photon dose. We estimate that 3 to 17% (best estimate 8%) of DwH surface oil was subject to photo-dissolution, comparable in magnitude to other widely recognized fate processes. Our findings invite a critical reevaluation of surface oil budgets for both DwH and future spills at sea.
RESUMEN
The biogeochemical fluxes that cycle oxygen (O2) play a critical role in regulating Earth's climate and habitability. Triple-oxygen isotope (TOI) compositions of marine dissolved O2 are considered a robust tool for tracing oxygen cycling and quantifying gross photosynthetic O2 production. This method assumes that photosynthesis, microbial respiration, and gas exchange with the atmosphere are the primary influences on dissolved O2 content, and that they have predictable, fixed isotope effects. Despite its widespread use, there are major elements of this approach that remain uncharacterized, including the TOI dynamics of respiration by marine heterotrophic bacteria and abiotic O2 sinks such as the photochemical oxidation of dissolved organic carbon (DOC). Here, we report the TOI fractionation for O2 utilization by two model marine heterotrophs and by abiotic photo-oxidation of representative terrestrial and coastal marine DOC. We demonstrate that TOI slopes associated with these processes span a significant range of the mass-dependent domain (λ = 0.499 to 0.521). A sensitivity analysis reveals that even under moderate productivity and photo-oxidation scenarios, true gross oxygen production may deviate from previous estimates by more than 20% in either direction. By considering a broader suite of oxygen cycle reactions, our findings challenge current gross oxygen production estimates and highlight several paths forward to better understanding the marine oxygen and carbon cycles.
RESUMEN
In late May 2021, the M/V X-Press Pearl container ship caught fire while anchored 18 km off the coast of Colombo, Sri Lanka and spilled upward of 70 billion pieces of plastic or "nurdles" (â¼1680 tons), littering the country's coastline. Exposure to combustion, heat, chemicals, and petroleum products led to an apparent continuum of changes from no obvious effects to pieces consistent with previous reports of melted and burned plastic (pyroplastic) found on beaches. At the middle of this continuum, nurdles were discolored but appeared to retain their prefire morphology, resembling nurdles that had been weathered in the environment. We performed a detailed investigation of the physical and surface properties of discolored nurdles collected on a beach 5 days after the ship caught fire and within 24 h of their arrival onshore. The color was the most striking trait of the plastic: white for nurdles with minimal alteration from the accident, orange for nurdles containing antioxidant degradation products formed by exposure to heat, and gray for partially combusted nurdles. Our color analyses indicate that this fraction of the plastic released from the ship was not a continuum but instead diverged into distinct groups. Fire left the gray nurdles scorched, with entrained particles and pools of melted plastic, and covered in soot, representing partial pyroplastics, a new subtype of pyroplastic. Cross sections showed that the heat- and fire-induced changes were superficial, leaving the surfaces more hydrophilic but the interior relatively untouched. These results provide timely and actionable information to responders to reevaluate cleanup end points, monitor the recurrence of these spilled nurdles, gauge short- and long-term effects of the spilled nurdles to the local ecosystem, and manage the recovery of the spill. These findings underscore partially combusted plastic (pyroplastic) as a type of plastic pollution that has yet to be fully explored despite the frequency at which plastic is burned globally.
RESUMEN
In May 2021, the M/V X-Press Pearl cargo ship caught fire 18 km off the west coast of Sri Lanka and spilled â¼1680 tons of spherical pieces of plastic or "nurdles" (â¼5 mm; white in color). Nurdles are the preproduction plastic used to manufacture a wide range of end products. Exposure to combustion, heat, and chemicals led to agglomeration, fragmentation, charring, and chemical modification of the plastic, creating an unprecedented complex spill of visibly burnt plastic and unburnt nurdles. These pieces span a continuum of colors, shapes, sizes, and densities with high variability that could impact cleanup efforts, alter transport in the ocean, and potentially affect wildlife. Visibly burnt plastic was 3-fold more chemically complex than visibly unburnt nurdles. This added chemical complexity included combustion-derived polycyclic aromatic hydrocarbons. A portion of the burnt material contained petroleum-derived biomarkers, indicating that it encountered some fossil-fuel products during the spill. The findings of this research highlight the added complexity caused by the fire and subsequent burning of plastic for cleanup operations, monitoring, and damage assessment and provides recommendations to further understand and combat the impacts of this and future spills.
RESUMEN
Sunlight exposure is a control of long-term plastic fate in the environment that converts plastic into oxygenated products spanning the polymer, dissolved, and gas phases. However, our understanding of how plastic formulation influences the amount and composition of these photoproducts remains incomplete. Here, we characterized the initial formulations and resulting dissolved photoproducts of four single-use consumer polyethylene (PE) bags from major retailers and one pure PE film. Consumer PE bags contained 15-36% inorganic additives, primarily calcium carbonate (13-34%) and titanium dioxide (TiO2; 1-2%). Sunlight exposure consistently increased production of dissolved organic carbon (DOC) relative to leaching in the dark (3- to 80-fold). All consumer PE bags produced more DOC during sunlight exposure than the pure PE (1.2- to 2.0-fold). The DOC leached after sunlight exposure increasingly reflected the 13C and 14C isotopic composition of the plastic. Ultrahigh resolution Fourier transform ion cyclotron resonance mass spectrometry revealed that sunlight exposure substantially increased the number of DOC formulas detected (1.1- to 50-fold). TiO2-containing bags photochemically degraded into the most compositionally similar DOC, with 68-94% of photoproduced formulas in common with at least one other TiO2-containing bag. Conversely, only 28% of photoproduced formulas from the pure PE were detected in photoproduced DOC from the consumer PE. Overall, these findings suggest that plastic formulation, especially TiO2, plays a determining role in the amount and composition of DOC generated by sunlight. Consequently, studies on pure, unweathered polymers may not accurately represent the fates and impacts of the plastics entering the ocean.
Asunto(s)
Carbono , Plásticos , Océanos y Mares , Polietileno , Luz SolarRESUMEN
The photodegradation rates of floating marine plastics govern their environmental lifetimes, but the controls on this process remain poorly understood. Photodegradation of these materials has so far been studied under ideal conditions in the absence of environmental factors such as biofouling, which may slow photochemical transformation rates through light screening. To investigate this interaction, we incubated different plastics in continuous flow seawater mesocosms to follow (i) the extent of biofilm growth on the samples and (ii) decreases in light transmittance through the samples over time. We used consumer products with high relevance (e.g., shopping bags, water bottles, and packaging materials) and with different formulations, referring to primary polymers (polyethylene (PE) and polyethylene terephthalate (PET)) and inorganic additives (titanium dioxide (TiO2)). The behavior of consumer-relevant formulations was compared to those of pure PE and PET films, revealing that the relative effects of UV- and, to a lesser extent, visible-light screening differ based on the formulation of the product. Pure PE showed greater relative UV-transmittance decreases (Δ = -34% through the entire sample, accounting for biofilm on both sides of the plastic film) than PET (Δ = -20%) and PE products with TiO2 (Δ = < -10%). Our results demonstrate that even with biofouling, photodegradation remains a highly relevant process for the fate of marine plastics. However, we expect photodegradation rates of plastics in the ocean to be slower than those measured in laboratory studies, due to light screening by biofilms, and the specific formulation of plastic products is a key determinant of the extent of this effect.
Asunto(s)
Incrustaciones Biológicas , Plásticos , Océanos y Mares , Polietileno/análisis , Agua de MarAsunto(s)
Investigación Biomédica , Contaminantes Ambientales , Contaminación Ambiental , Plásticos , HumanosRESUMEN
Microbes and sunlight convert terrigenous dissolved organic matter (DOM) in surface waters to greenhouse gases. Prior studies show contrasting results about how biological and photochemical processes interact to contribute to the degradation of DOM. In this study, DOM leached from the organic layer of tundra soil was exposed to natural sunlight or kept in the dark, incubated in the dark with the natural microbial community, and analysed for gene expression and DOM chemical composition. Microbial gene expression (metatranscriptomics) in light and dark treatments diverged substantially after 4 h. Gene expression suggested that sunlight exposure of DOM initially stimulated microbial growth by (i) replacing the function of enzymes that degrade higher molecular weight DOM such as enzymes for aromatic carbon degradation, oxygenation, and decarboxylation, and (ii) releasing low molecular weight compounds and inorganic nutrients from DOM. However, growth stimulation following sunlight exposure of DOM came at a cost. Sunlight depleted the pool of aromatic compounds that supported microbial growth in the dark treatment, ultimately causing slower growth in the light treatment over 5 days. These first measurements of microbial metatranscriptomic responses to photo-alteration of DOM provide a mechanistic explanation for how sunlight exposure of terrigenous DOM alters microbial processing and respiration of DOM.
Asunto(s)
Bacterias/metabolismo , Agua Dulce/microbiología , Compuestos Orgánicos/metabolismo , Luz Solar , Bacterias/genética , Carbono/metabolismo , Análisis Costo-Beneficio , Perfilación de la Expresión Génica , Gases de Efecto Invernadero/análisis , Suelo/química , Transcriptoma/genéticaRESUMEN
The weathering of crude oil at sea has been researched for nearly half a century. However, there have been relatively few opportunities to validate laboratory-based predictions about the rates, relative importance, and controls of oil weathering processes (e.g., evaporation, photo-oxidation, and emulsification) under natural field conditions. The 2010 Deepwater Horizon (DWH) spill in the Gulf of Mexico provided the oil spill science community with a unique opportunity to evaluate our laboratory-based predictions in nature. With a focus on photochemical weathering, we review what we knew prior to the DWH spill, what we learned from the DWH spill, and what priority gaps in knowledge remain. Three key findings from the DWH spill are discussed. First, the rate and extent of photochemical weathering was much greater for the floating surface oil than expected based on early conceptual models of oil weathering. Second, indirect photochemical processes played a major role in the partial oxidation of the floating surface oil. Third, the extensive and rapid changes to the physical and chemical properties of oil by sunlight may influence oil fate, transport, and the selection of response tools. This review also highlights findings and predictions about photochemical weathering of oil from several decades ago that appear to have escaped the broader scientific narrative and ultimately proved true for the DWH spill. By focusing on these early predictions and synthesizing the numerous findings from the DWH spill, we expect this review will better prepare the oil spill science community to respond to the next big spill in the ocean.