Studies of Protein Binding to Biomimetic Membranes Using a Group of Uniform Materials Based on Organic Salts Derived From 8-Anilino-1-naphthalenesulfonic Acid.

Tuning the 8-anilino-1-naphthalenesulfonic acid (ANS) structure usually requires harsh conditions and long reaction times, which can result in low yields. Herein, ANS was modified to form an ANS group of uniform materials based on organic salts (GUMBOS), prepared with simple metathesis reactions and distinct cations, namely tetrabutylammonium (N4444), tetrahexylammonium (N6666), and tetrabutylphosphonium (P4444). These ANS-based GUMBOS were investigated as fluorescent probes for membrane binding studies with four proteins having distinct physicochemical properties. Liposomes of 1,2-dimyristoyl-sn-glycero-3-phosphocholine were employed as membrane models as a result of their ability to mimic the structure and chemical composition of cell membranes. Changes in fluorescence intensity were used to monitor protein binding to liposomes, and adsorption data were fitted to a Freundlich-like isotherm. It was determined that [N4444][ANS] and [P4444][ANS] GUMBOS have enhanced optical properties and lipophilicity as compared to parent ANS. As a result, these two GUMBOS were selected for subsequent protein-membrane binding studies. Both [N4444][ANS] and [P4444][ANS] GUMBOS and parent ANS independently reached membrane saturation within the same concentration range. Furthermore, distinct fluorescence responses were observed upon the addition of proteins to each probe, which demonstrates the impact of properties such as lipophilicity on the binding process. The relative maintenance of binding cooperativity and maximum fluorescence intensity suggests that proteins compete with ANS-based probes for the same membrane binding sites. Finally, this GUMBOS-based approach is simple, rapid, and involves relatively small amounts of reagents, making it attractive for high-throughput purposes. These results presented herein can also provide relevant information for designing GUMBOS with ameliorated properties.

Fluoroquinolone-Based Organic Salts (GUMBOS) with Antibacterial Potential.

Antimicrobial resistance is a silent pandemic considered a public health concern worldwide. Strategic therapies are needed to replace antibacterials that are now ineffective. One approach entails the use of well-known antibacterials along with adjuvants that possess non-antibiotic properties but can extend the lifespan and enhance the effectiveness of the treatment, while also improving the suppression of resistance. In this regard, a group of uniform materials based on organic salts (GUMBOS) presents an alternative to this problem allowing the combination of antibacterials with adjuvants. Fluoroquinolones are a family of antibacterials used to treat respiratory and urinary tract infections with broad-spectrum activity. Ciprofloxacin and moxifloxacin-based GUMBOS were synthesized via anion exchange reactions with lithium and sodium salts. Structural characterization, thermal stability and octanol/water partition ratios were evaluated. The antibacterial profiles of most GUMBOS were comparable to their cationic counterparts when tested against Gram-positive S. aureus and Gram-negative E. coli, except for deoxycholate anion, which demonstrated the least effective antibacterial activity. Additionally, some GUMBOS were less cytotoxic to L929 fibroblast cells and non-hemolytic to red blood cells. Therefore, these agents exhibit promise as an alternative approach to combining drugs for treating infections caused by resistant bacteria.

Influence of humidity on accuracy of QCM - IR780-based GUMBOS sensor arrays.

Herein, hydrophobic coating materials are reported for QCM detection of VOCs under dry and humid conditions. In this study, IR780-based GUMBOS ([IR780][OTf] and [IR780][NTf2]) were synthesized using an ion exchange reaction and the anions trifluoromethanesulfonimide ([OTf]) and bisperfluoromethanesulfonimide ([NTf2]). The parent iodide salts and GUMBOS ([IR780][I]), [IR780][OTf], and [IR780][NTf2]) were characterized using several analytical techniques. These salts were then employed as sensor coatings on quartz crystal resonators using an electrospray coating method. These sensors were exposed to four flow ratios of five common VOCs in the absence and presence of 10 vol% water. Fundamental frequency responses were recorded and further employed as input variables to develop highly accurate multi-sensor arrays (MSAs). Accuracy was better than 78.3% without water, and better than 91.7% in the presence of water. When multi-harmonic responses were evaluated as input variables to assess discrimination ability for each sensor, highly accurate virtual sensor arrays (VSAs) were developed using each GUMBOS coating. In the case of [IR780][NTf2], a slight improvement in discrimination was achieved in the presence of water (95%) versus the absence of water. Moreover, this study highlights development of readily synthesized hydrophobic coatings of IR780-based GUMBOS for potential detection and discrimination of VOCs in aqueous systems.

Perspectives of Three African American Chemists: Reflections on Careers, Experiences, and the Future.

Three African American analytical chemists, whose primary research careers have focused in the respective sectors of academia, government, and industry, have come together to provide personal perspectives on parameters that have impacted their careers as well as to provide their perceptions of the current and future status of African Americans in the overall science, technology, engineering, and mathematics (STEM) enterprise, and the more specific field of analytical chemistry. The authors, having ∼150 years of combined experiences, reflect on the past status and contemplate future advances for African Americans in STEM. The most important factors during their formative years that underpinned their success over the long-term are enumerated. Particularly cited are the distinct features within the Historically Black Colleges and Universities (HBCU) environment that placed them solidly on a path toward successful careers. The Grand Challenge now and for the foreseeable future, reversal of the dysfunctional metropolitan public-school systems, is cited and the only perceived light in the tunnel for addressing this issue is mentioned. Finally, recommendations are made for the future where diversity within the STEM enterprise will be a prerequisite for U.S. competitiveness in our global society.

Fluorescent Ionic Probe for Determination of Mechanical Properties of Healed Poly(ethylene-co-methacrylic acid) Ionomer Films.

In recent years, advanced materials with properties resembling biological systems, particularly artificial muscles, have received intense scrutiny. This is because the interesting conformational shape characteristics of such materials have benefited a variety of technologies, including textiles, 3D printing, and medical devices. Although a multitude of shape memory properties have been studied and developed in recent years, self-healing of these polymers after puncture or rupture has also become a major area of study. Most techniques for detection of such processes are mechanically based and require considerable hands-on monitoring. Thus, a rapid visual detection method for self-healing is highly desirable. Herein, we describe fluorescence studies for rapid detection of self-healing properties of a partially neutralized sodium ionomer poly(ethylene-co-methacrylic acid) (PEMA). In this study, two different fluorophores, parent non-ionic 4,6-dipyrenylpyrimidine and ionic 4,6-dipyrenylpyrimidinium iodide fluorophores, were evaluated as possible sensors of self-healing. Incorporation of these probes via solution blending and compatibility into a PEMA of these fluorophores were evaluated. Thermal characterizations using differential scanning calorimetry were also performed to elucidate physical characteristics of healed sites. Ratiometric fluorescence emission variations were explored within puncture-healed ionomer films and related to Young's modulus properties with good linearity, indicating potential utility of this approach for monitoring elastic modulus properties after healing has occurred. Further statistical analyses of mechanical processes using quadratic discriminant analysis resulted in development of several highly accurate predictive models for determining time since damage healing.

Protein discrimination using erythrosin B-based GUMBOS in combination with UV-Vis spectroscopy and chemometrics.

GUMBOS (Group of Uniform Materials Based on Organic Salts) have recently emerged as interesting materials for protein analysis due to their unique features and high tunability. In this regard, four novel erythrosin B (EB)-based GUMBOS were synthesized and their potential to discriminate among proteins with distinct properties (e.g., size, charge, and hydrophobicity) was assessed. These solid-phase materials were prepared using a single-step metathesis reaction between EB and various phosphonium and ammonium cations, namely tetrabutylphosphonium (P4444+), tributylhexadecylphosphonium (P44416+), tetrabutylammonium (N4444+), and benzyldimethylhexadecylammonium (BDHA+). Subsequently, the effect of pH (3.0, 4.5, and 6.0) and reaction time (5, 10, and 15 min) on the discriminatory power of synthesized GUMBOS was evaluated. Absorption spectra resulting from the interaction between EB-based GUMBOS and proteins were analyzed using partial least squares discriminant analysis (PLSDA). Unlike time, the pH value was determined to have influence over GUMBOS discrimination potential. Correct protein assignments varied from 86.5% to 100.0%, and the best discriminatory results were observed for [P4444]2[EB] and [N4444]2[EB] at pH 6.0. Additionally, these two GUMBOS allowed discrimination of protein mixtures containing different ratios of albumin and myoglobin, which appeared as individualized clusters in the PLSDA scores plots. Overall, this study showcases EB-based GUMBOS as simple synthetic targets to provide a label-free, cost-effective, rapid, and successful approach for discrimination of single proteins and their mixtures.

Pyrene-Benzimidazole Derivatives as Novel Blue Emitters for OLEDs.

Three novel small organic heterocyclic compounds: 2-(1,2-diphenyl)-1H-benzimidazole-7-tert-butylpyrene (compound A), 1,3-di(1,2-diphenyl)-1H-benzimidazole-7-tert-butylpyrene (compound B), and 1,3,6,8-tetra(1,2-diphenyl)-1H-benzimidazolepyrene (compound C) were synthesized and characterized for possible applications as blue OLED emitters. The specific molecular design targeted decreasing intermolecular aggregation and disrupting crystallinity in the solid-state, in order to reduce dye aggregation, and thus obtain efficient pure blue photo- and electroluminescence. Accordingly, the new compounds displayed reasonably high spectral purity in both solution- and solid-states with average CIE coordinates of (0.160 ± 0.005, 0.029 ± 0.009) in solution and (0.152 ± 0.007, 0.126 ± 0.005) in solid-state. These compounds showed a systematic decrease in degree of crystallinity and intermolecular aggregation due to increasing steric hindrance, as revealed using powder X-ray diffraction analysis and spectroscopic studies. An organic light-emitting diode (OLED) prototype fabricated using compound B as the non-doped emissive layer displayed an external quantum efficiency (EQE) of 0.35 (±0.04)% and luminance 100 (±6) cd m-2 at 5.5 V with an essentially pure blue electroluminescence corresponding to CIE coordinates of (0.1482, 0.1300). The highest EQE observed from this OLED prototype was 4.3 (±0.3)% at 3.5 V, and the highest luminance of 290 (±10) cd m-2 at 7.5 V. These values were found comparable to characteristics of the best pure blue OLED devices based on simple fluorescent small-molecule organic chromophores.

Recycling Thermoset Epoxy Resin Using Alkyl-Methyl-Imidazolium Ionic Liquids as Green Solvents.

Herein, a solvent-based green recycling procedure is reported for recycling thermoset epoxy resins (TERs) and carbon fiber reinforced epoxy composites (CFRECs) employing ionic liquids (ILs) and alcohols under mild conditions. With melting points less than 100 °C, ILs are defined as organic salts, typically composed of bulky cations with organic or inorganic counteranions. As a result of their unique physical properties such as low vapor pressure, relatively high thermal stability, and multifunctional tunability, these solvents are often classified as "green solvents" as compared to traditional organic solvents. In this study, swelling and dissolution of TER are evaluated in the presence of pure alkyl-methyl-imidazolium ILs, alcohols, and various mixtures of these co-solvents to determine their swelling and depolymerization capacity at mild temperatures in the absence of catalysts. In these studies, three ILs with different alkyl lengths were evaluated: 1-butyl-3-methyl imidazolium chloride ([BMIm][Cl]), 1-hexyl-3-methyl imidazolium bromide ([HMIm][Br]), and 1-octyl-3-methyl imidazolium bromide ([OMIm][Br]) along with two alcohols: ethylene glycol (EG) and glycerol (Gly). The highest swelling capacity of TER at 150 °C was achieved by a combination of [BMIm][Cl] and EG. In addition, swelling and dissolution of TER were evaluated in the presence of several anion variants of 1-butyl-3-methyl-imidazolium ILs with EG. Complete dissolution of both TERs and CFRECs was achieved in 150 min (2.5 h) at 150 °C under atmospheric pressure. Finally, recovery and reuse of the recycled monomer after dissolution were examined. Recovered epoxy monomers employed to synthesize a recycled TER exhibited similar mechanical properties to the parent TER. In addition, it was demonstrated that carbon fibers could be successfully recovered from CFREC using the recycling method detailed in this manuscript.

QCM Sensor Arrays, Electroanalytical Techniques and NIR Spectroscopy Coupled to Multivariate Analysis for Quality Assessment of Food Products, Raw Materials, Ingredients and Foodborne Pathogen Detection: Challenges and Breakthroughs.

Quality checks, assessments, and the assurance of food products, raw materials, and food ingredients is critically important to ensure the safeguard of foods of high quality for safety and public health. Nevertheless, quality checks, assessments, and the assurance of food products along distribution and supply chains is impacted by various challenges. For instance, the development of portable, sensitive, low-cost, and robust instrumentation that is capable of real-time, accurate, and sensitive analysis, quality checks, assessments, and the assurance of food products in the field and/or in the production line in a food manufacturing industry is a major technological and analytical challenge. Other significant challenges include analytical method development, method validation strategies, and the non-availability of reference materials and/or standards for emerging food contaminants. The simplicity, portability, non-invasive, non-destructive properties, and low-cost of NIR spectrometers, make them appealing and desirable instruments of choice for rapid quality checks, assessments and assurances of food products, raw materials, and ingredients. This review article surveys literature and examines current challenges and breakthroughs in quality checks and the assessment of a variety of food products, raw materials, and ingredients. Specifically, recent technological innovations and notable advances in quartz crystal microbalances (QCM), electroanalytical techniques, and near infrared (NIR) spectroscopic instrument development in the quality assessment of selected food products, and the analysis of food raw materials and ingredients for foodborne pathogen detection between January 2019 and July 2020 are highlighted. In addition, chemometric approaches and multivariate analyses of spectral data for NIR instrumental calibration and sample analyses for quality assessments and assurances of selected food products and electrochemical methods for foodborne pathogen detection are discussed. Moreover, this review provides insight into the future trajectory of innovative technological developments in QCM, electroanalytical techniques, NIR spectroscopy, and multivariate analyses relating to general applications for the quality assessment of food products.

Efficient Low-Cost Procedure for Microextraction of Estrogen from Environmental Water Using Magnetic Ionic Liquids.

In this study, three magnetic ionic liquids (MILs) were investigated for extraction of four estrogens, i.e., estrone (E1), estradiol (E2), estriol (E3), and ethinylestradiol (EE2), from environmental water. The cation trihexyl(tetradecyl)phosphonium ([P66614]+), selected to confer hydrophobicity to the resulting MIL, was combined with tetrachloroferrate(III), ferricyanide, and dysprosium thiocyanate to yield ([P66614][FeCl4]), ([P66614]3[Fe(CN)6]), and ([P66614]5[Dy(SCN)8]), respectively. After evaluation of various strategies to develop a liquid-liquid microextraction technique based on synthesized MILs, we placed the MILs onto a magnetic stir bar and used them as extracting solvents. After extraction, the MIL-enriched phase was dissolved in methanol and injected into an HPLC-UV for qualitative and quantitative analysis. An experimental design was used to simultaneously evaluate the effect of select variables and optimization of extraction conditions to maximize the recovery of the analytes. Under optimum conditions, limits of detection were in the range of 0.2 (for E3 and E2) and 0.5 µg L-1 (for E1), and calibration curves exhibited linearity in the range of 1-1000 µg L-1 with correlation coefficients higher than 0.998. The percent relative standard deviation (RSD) was below 5.0%. Finally, this method was used to determine concentration of estrogens in real lake and sewage water samples.

GUMBOS and nanoGUMBOS in chemical and biological analysis: A review.

GUMBOS (group of uniform materials based on organic salts) is a novel class of materials that exhibits similar features to those of ionic liquids, but have melting points between 25 and 250 °C. GUMBOS can be easily converted into nanomaterials (nanoGUMBOS), with advantages of working at nanoscale. Due to the huge number of possible cation-anion combinations, these materials can be multifunctional and designed for a specific task. This review highlights the possibility of fine-tuning GUMBOS physical and chemical properties in view of changing their ionic counterparts. Their outstanding potential for analytical applications is shown through recent developments in areas such as sensing, and solid-phase extraction. Available methods for synthesis of nanoGUMBOS, and their different outcomes in shapes and optical properties are described, with pros and cons being outlined. Finally, an analysis is made of opportunities and challenges faced by this class of organic ionic materials.

Octenidine/carbenicillin GUMBOS as potential treatment for oropharyngeal gonorrhoea.

BACKGROUND: Reducing Neisseria gonorrhoeae colonies in the oropharynx is a viable solution to minimize the transmission of this bacterium amongst individuals. OBJECTIVES: A strategy involving the electrostatic interaction between a common antiseptic and a discontinued antibiotic (i.e. octenidine and carbenicillin) was evaluated as a potential treatment for gonorrhoea. Octenidine/carbenicillin is a novel group of uniform materials based on organic salts (GUMBOS) with inherent in vitro antibacterial activity that comes from its parent antiseptic and antibacterial ions, octenidine and carbenicillin, respectively. METHODS: Antibacterial activities for octenidine dihydrochloride, disodium carbenicillin, octenidine/carbenicillin and stoichiometrically equivalent 1:1 octenidine dihydrochloride to disodium carbenicillin were assessed using the Kirby-Bauer disc diffusion assay for N. gonorrhoeae (ATCC 49226) and three clinical isolates. Predictive permeability using the Parallel Artificial Membrane Permeability Assay and cytotoxicity against HeLa cells was also evaluated. RESULTS: Additive in vitro antibacterial activities against N. gonorrhoeae were observed in this study, which suggests octenidine/carbenicillin could be a useful agent in reducing N. gonorrhoeae transmission and minimizing gonorrhoea infections. Octenidine/carbenicillin also exhibited bioequivalence to azithromycin and doxycycline, two currently prescribed antibiotics. Likewise, octenidine/carbenicillin had improved predicted permeability compared with octenidine dihydrochloride. CONCLUSIONS: Antimicrobial GUMBOS synthesized in this study could be used as an adjunctive treatment approach to current drug therapies for oropharyngeal gonorrhoea infection control and prevention.

Protein Discrimination Using a Fluorescence-Based Sensor Array of Thiacarbocyanine-GUMBOS.

Sensitive and selective detection of proteins from complex samples has gained substantial interest within the scientific community. Early and precise detection of key proteins plays an important role in potential clinical diagnosis, treatment of different diseases, and proteomic research. In the study reported here, six different compounds belonging to a group of uniform materials based on organic salts (GUMBOS) have been synthesized using three thiacarbocyanine (TC) dyes and employed as fluorescent sensors. Fluorescence properties of micro- and nanoaggregates of these TC-based GUMBOS formed in phosphate buffer solutions are studied in the absence and presence of seven proteins. Fluorescence response patterns of these TC-based GUMBOS were analyzed by linear discriminant analysis (LDA). The constructed LDA model allowed discrimination of these seven proteins at various concentrations with 100% accuracy. The sensing and discrimination abilities of these TC-based GUMBOS were further evaluated in mixtures of two major proteins, i.e., human serum albumin and hemoglobin. Fluorescence response patterns of these mixtures were analyzed by LDA. This model allowed discrimination of various mixtures with 100% accuracy. Moreover, spiked urine samples were prepared and the responses of these sensors were collected and analyzed by LDA. Remarkably, discrimination of these seven proteins was also achieved with 100% accuracy.

Hyaluronic Acid-Cellulose Composites as Patches for Minimizing Bacterial Infections.

A facile method was used to synthesize biocomposites containing differing ratios of hyaluronic acid (HA) and cellulose (CEL). Based on the properties of the individual polymers, the resultant composite materials may have potentially great wound care properties. In the method outlined here, 1-butyl-3-methylimidazolium chloride ([Bmim][Cl]), a simple ionic liquid, was used as the sole solvent without chemical modifiers to dissolve the biopolymers at ratios of 1:1 and 2:1 HA to CEL. This method was completely recyclable since the ionic liquid, [Bmim][Cl], can be recovered. Results from spectroscopic measurements [Fourier transform infrared (FT-IR) and X-ray diffraction (XRD)] confirm the interaction between HA and CEL. Scanning electron microscopy (SEM) images reflect differing biopolymer ratios and the resulting impact on the texture and porosity of these composite materials. The composites exhibited high swelling capacity in various media. These composites were also drug-loaded to examine drug release properties for greater potential in combating Staphylococcus aureus infections.

Quartz Crystal Microbalance Based Sensor Arrays for Detection and Discrimination of VOCs Using Phosphonium Ionic Liquid Composites.

Herein, we examine two sensing schemes for detection and discrimination of chlorinated volatile organic compounds (VOCs). In this work, phosphonium ionic liquids (ILs) were synthesized and vapor sensing properties examined and compared to phosphonium IL-polymer composites. Pure IL sensors were used to develop a QCM-based multisensory array (MSA), while IL-polymer composites were used to develop an MSA and virtual sensor arrays (VSAs). It was found that by employing the composite MSA, five chlorinated VOCs were accurately discriminated at 95.56%, which was an increase in accuracy as compared to pure ILs MSA (84.45%). Data acquired with two out of three VSAs allowed discrimination of chlorinated VOCs with 100% accuracy. These studies have provided greater insight into the benefits of incorporating polymers in coating materials for enhanced discrimination accuracies of QCM-based sensor arrays. To the best of our knowledge, this is the first report of a QCM-based VSA for discrimination of closely related chlorinated VOCs.

Pyrenylpyridines: Sky-Blue Emitters for Organic Light-Emitting Diodes.

A novel sky-blue-emitting tripyrenylpyridine derivative, 2,4,6-tri(1-pyrenyl)pyridine (2,4,6-TPP), has been synthesized using a Suzuki coupling reaction and compared with three previously reported isomeric dipyrenylpyridine (DPP) analogues (2,4-di(1-pyrenyl)pyridine (2,4-DPP), 2,6-di(1-pyrenyl)pyridine (2,6-DPP), and 3,5-di(1-pyrenyl)pyridine (3,5-DPP)). As revealed by single-crystal X-ray analysis and computational simulations, all compounds possess highly twisted conformations in the solid state with interpyrene torsional angles of 42.3°-57.2°. These solid-state conformations and packing variations of pyrenylpyridines could be correlated to observed variations in physical characteristics such as photo/thermal stability and spectral properties, but showed only marginal influence on electrochemical properties. The novel derivative, 2,4,6-TPP, exhibited the lowest degree of crystallinity as revealed by powder X-ray diffraction analysis and formed amorphous thin films as verified using grazing-incidence wide-angle X-ray scattering. This compound also showed high thermal/photo stability relative to its disubstituted analogues (DPPs). Thus, a nondoped organic light-emitting diode (OLED) prototype was fabricated using 2,4,6-TPP as the emissive layer, which displayed a sky-blue electroluminescence with Commission Internationale de L'Eclairage (CIE) coordinates of (0.18, 0.34). This OLED prototype achieved a maximum external quantum efficiency of 6.0 ± 1.2% at 5 V. The relatively high efficiency for this simple-architecture device reflects a good balance of electron and hole transporting ability of 2,4,6-TPP along with efficient exciton formation in this material and indicates its promise as an emitting material for design of blue OLED devices.

Imidazolium-dysprosium-based magnetic NanoGUMBOS for isolation of hemoglobin.

A novel imidazolium-dysprosium-based magnetic nanomaterial, i.e. [C16mim]5[Dy(SCN)8] nanoGUMBOS (nanomaterials fabricated from a group of uniform material based on organic salts), was prepared using a facile method for selective hemoglobin (Hb) isolation. In this nanomaterial, the imidazolium cation serves as a selective Hb affinity group, while dysprosium contributes paramagnetic properties. Through a combination of the advantages of ionic liquids, magnetic adsorbent, and nanoscale solid phase extraction, [C16mim]5[Dy(SCN)8] nanoGUMBOS exhibit great selectivity toward Hb and a favorable extraction efficiency of 95.4% when 1 mL of 100 µg/mL Hb solution is processed with 0.6 mg of [C16mim]5[Dy(SCN)8] nanoGUMBOS. As the Hb concentration increased to 800 µg/mL, the adsorption capacity approached ∼840 µg/mg. The adsorbed protein is recovered with an elution efficiency of 87% by using 1% SDS solution. This novel nanoGUMBOS solid-phase extraction procedure was successfully applied to selective isolation of Hb from human whole blood and verified using SDS-PAGE. This simple strategy is a novel approach towards fabrication and use of a nanoadsorbent for selective isolation of proteins.

Tumor-Targeting NIRF NanoGUMBOS with Cyclodextrin-Enhanced Chemo/Photothermal Antitumor Activities.

The near-infrared fluorescent (NIRF) dye, IR780, is recognized as a promising theranostic agent and has been widely investigated for imaging, chemotherapeutic, and phototherapeutic applications. However, its poor photostability and nonselective toxicities toward both cancer and normal cells limit its biological applications. Herein, we introduce the use of GUMBOS (a group of uniform materials based on organic salts) developed through counter-anion exchange with IR780 and subsequent nanomaterials (nanoGUMBOS) formed by complexation with cyclodextrin (CD) for enhanced chemo/photothermal therapy. Such CD-based nanoGUMBOS display improved aqueous stability, photostability, and photothermal effects relative to traditional IR780. The examination of in vitro cytotoxicity reveals that CD-based nanoGUMBOS are selectively toxic toward cancer cells and exhibit synergistically enhanced cytotoxicity toward cancer cells upon NIR laser irradiation. Additionally, in vivo NIRF imaging demonstrated selective accumulation of these nanoGUMBOS within the tumor site, indicating tumor-targeting properties. Further in vivo therapeutic study of these CD-based nanoGUMBOS suggests excellent chemo/photothermal antitumor effects. Using these studies, we herein demonstrate a promising strategy, via conversion of IR780 into nanoGUMBOS, that can be used for improved theranostic cancer treatment.

Influence of Anion Variations on Morphological, Spectral, and Physical Properties of the Propidium Luminophore.

Propidium iodide (3,8-diamino-5-[3-(diethylmethylammonio)propyl]-6-phenylphenanthridinium diiodide, [P][I]), is a well-known red fluorescent dye that is widely used for biological applications such as staining. In this study, we have replaced the iodide counteranion of [P][I] with three hydrophobic and bulky organic anions, trifluoromethanesulfonate/[TfO], bis(trifluoromethanesulfonyl)imide/[NTf2], and bis(perfluoroethylsulfonyl)imide/[BETI], and have thus obtained a propidium-derived group of uniform materials based on organic salts (PGUMBOS). The morphological, spectral, and physical properties of these materials were investigated in order to understand the impact of anion variations. While [P][I] is a crystalline solid, propidium salts with [BETI] or [NTf2] counteranions, i.e., [P][BETI] and [P][NTf2], have significantly lower crystallinity as reflected in powder X-ray diffraction data. In addition, [P][BETI] and [P][NTf2] exhibited improved photothermal stability as compared to [P][I] when examined using thermogravimetric analysis and time-dependent kinetic fluorescence experiments under the given experimental conditions. Spectral and electronic properties of the propidium luminophore were not significantly changed upon anion variations, although fluorescence lifetimes and quantum yields showed a systematic increase with decreasing solvent polarity. The experimental HOMO-LUMO energy gaps of these compounds were ∼2 eV with energies of HOMO and LUMO orbitals obtained as -5.15 (±0.08) and -3.19 (±0.08) eV.