[Application Case of Accurate Site Investigation with Life-Cycle Conceptual Site Model Development].

A life cycle conceptual site model (LC-CSM) can represent the actual spatial distribution and migration of pollution of a site very accurately and be beneficial in supporting decisions for accurate site remediation or risk management. A volatile chlorinated hydrocarbon contaminated site in the Beijing-Tianjin-Hebei region was chosen as the study case. LC-CSMs were established following the site assessment, preliminary investigation, detailed investigation, and supplementary investigation of each stage. The application of field screening tests such as a membrane interface probe and the multi-electrode resistivity method assisted in identifying potential pollution sources and hot points. Concurrently, a large amount of vinyl chloride, the end product of chlorinated hydrocarbon degradation, was detected in some boreholes, indicating that pollutant biodegradation had occurred at this site. Some typical boreholes and cross-sections were chosen to analyze the biodegradation indicators and chemical fingerprints, combining the results of the comprehensive score of chlorinated hydrocarbon anaerobic biodegradability in groundwater reaching 22. It is judged that the site has strong anaerobic biodegradability. This step-by-step optimization forms an LC-CSM for site investigation, which provides scientific support for accurate site characterization.

[High Efficiency Removal of 1,2-Dichloroethane from Groundwater by Microscale Zero-valent Iron Combined with Biological Carbon Source].

In order to explore the degradation mechanism of 1,2-dichloroethane (1,2-DCA), which is one of the refractory saturated chlorinated hydrocarbons, the groundwater and aquifer soil from a chlorinated hydrocarbon contaminated site in Beijing were collected to carry out microcosm experiments under anaerobic conditions using zero-valent iron (ZVI) coupled with biological action. The removal rate of 1,2-DCA under different conditions was investigated by adding a composite agent consisting of micron zero-valent iron (mZVI), a biological carbon source, and a few nutrients. Changes of the groundwater physical and chemical parameters were monitored. The results showed that, when the dosage of the composite agent reached 3%, the concentration of 1,2-dichloroethane could be reduced to below the detection limit within 15 days. Neutral pH and the presence of SO42- were more conducive to the dechlorination of 1,2-DCA. After 30 days, an obvious increase in the ethene concentration was detected (0.17-0.52 mg·L-1) and no significant vinyl chloride, chloroethane, or ethane was observed in the microcosms, illustrating that the dihaloelimination was the main degradation pathway of 1,2-DCA in the system. In addition, the groundwater could maintain a low oxidation-reduction potential (-100 to -300 mV), dissolved oxygen (<0.5 mg·L-1), and a suitable pH value (6.5-7.5) for a long time under the synergy of mZVI and a biological carbon source. This was beneficial to the activity of anaerobic microorganisms and to the dechlorination reaction.

[Screening of the Reduction/Stabilization Reagent for Cr(â ¥) Contaminated Soil in a Planting Site and Reaction Process Monitoring].

There are lots of problems in the domestic remediation of Cr (Ⅵ) contaminated soil field,such as lack of the key processing parameters,poor long-term effect and so on.The Cr (Ⅵ) heavy polluted surface soil was sampled from an electroplating site in North-China,and then treated with five different reducing reagents.At the same time,the on-line ORP probes and interval sampling test were chosen to monitor the reaction process,and to explore the reaction rate and effect.The results showed that No.4 reagent had the highest Cr (Ⅵ) reduction effect,reaching up to 99.5%,and the minimum soil Cr (Ⅵ) concentration could reach 2.4 mg·kg-1.The No.1 and No.4 reagents had relatively faster reducing rates.There were obvious difference in ORP and pH monitoring values between different reductants,for example,the No.1 reagent kept the ORP value stable at around -400 mV.The No.4 reagent gradually increased the value from -200 mV to 100 mV since 30h,and then kept stable.According to the pH difference among different reductants,the No.4 reagent was the best and kept the pH value at around 7.Taking together the final effect and process key parameters,the No.4 reagent was the best.The scale-up experiment was operated with process monitoring,and the ORP and conductivity values showed that the reduction reaction took about 160 h.This work would provide theoretical basis for controlling the maintenance condition and reaction process in soil Cr (Ⅵ) remediation.

Application of nitrate to enhance biodegradation of gasoline components in soil by indigenous microorganisms under anoxic condition.

Anaerobic/anoxic biodegradation of hydrocarbons offers an attractive approach to the removal of these compounds from polluted environments such as aquifers, aquatic sediments, submerged soils and subsurface soils. The application of nitrate was investigated to accelerate the degradation of gasoline components such as mono-aromatic hydrocarbons and total petroleum hydrocarbons (TPH) in soil by indigenous microorganisms under anoxic condition. The addition of nitrate had little effect on the degradation of mono-aromatic hydrocarbons m- & p-xylene, o-xylene, sec-butylbenzene and 1,2,4-trimethylbenzene, but facilitated the degradation of TPH (C6-C12) and mono-aromatic hydrocarbons toluene and ethylbenzene markedly. Furthermore, the more nitrate added, the higher the percentage of toluene, ethylbenzene and TPH (C6-C12) degraded after 180 days of anoxic incubation. Microorganisms capable of degrading toluene, ethylbenzene and TPH (C6-C12) with nitrate as the electron acceptor under anaerobic/anoxic condition are composed predominantly of Alpha-, Beta-, Gamma- or Delta-proteobacteria. Beta- and Gamma-proteobacteria were the main components of indigenous microorganisms, and accounted for 83-100% of the total amount of indigenous microorganisms in soil used in this study. Furthermore, the total amount of indigenous microorganisms increased with nitrate added. The addition of nitrate stimulated the growth of indigenous microorganisms, and therefore facilitated the degradation of toluene, ethylbenzene and TPH (C6-C12).

[Statistical characteristic analysis of soil PAHs in a coking contaminated site of China].

Statistical characteristic analysis of pollutants in contaminated sites can help identify the origin, generation, and spatial variation of different pollutants, and can reduce the uncertainty of site survey data. Taking a large and abandoned contaminated coking site of China as the object, 114 surface (0-50 cm) soil samples were collected, with the statistical and spatial characteristics of 16 priority PAHs (sigmaPAHs) analyzed. The descriptive statistical analysis indicated that the sigmaPAH levels varied significantly, and the data were severely skewed. The correlation matrix (CM) and principal component analysis (PCA) showed that the extracted first two principal components (PCs) could effectively represent the whole site pollution data. Four pollutants, i. e., Baa, Bbf&Bkf, Bap, and Inp, were selected for trend analysis and spatial local variance analysis. In the east-west and north-south directions of the site, the pollution showed a low-high-low trend. The variation coefficient of pollution for the site was higher in the central, northwest, and southwest regions, while lower in the other regions.

[Analysis of characteristics of dioxin contamination in the chlor-alkali site that uses graphite anode for production].

In order to find out the characteristics of dioxin contamination, we sampled and analyzed the soil and groundwater on a chlor-alkali factory site that uses graphite anode for production. The results show that the toxic equivalent quantity (TEQ) of dioxins in soil samples exceeds the U. S. EPA region screening value (RSL), with the chlorine hydrogen processing workshop, the electric tank workshop, the asbestos stack area, the sewage treatment plant and the oil depot were affected. The dioxin concentration limit of the groundwater sample doesn't exceed the drinking water standard of China. Considering the fingerprints characteristics of dioxin-contaminated concentration, dioxin isomers content and TEQ, the priority pollutants for control on this site are 2,3,7,8-TCDF, 2,3,4,7,8-PeCDF, 1,2,3,4,7,8-HxCDF, OCDD and 2,3,7,8-TCDD. The results show that dioxin pollution is very serious in the chlor-alkali plant that uses graphite anode for production, and the environmental supervision is imperative.

[Heterogeneous characteristic of PAHs' spatial distribution in a large coking site of China].

A large coking contaminated site was selected to study the PAHs' spatial distribution probability in surface-soil (0-50 cm) through the indicator kriging of the non-parametric geostatistics, and the map of probability distribution with a contaminant target was plotted over the entire site. Results indicated that the indicator semivariograms were stable after the conversion of sample data, but the poor correlation of spatial samples was observed due to the spatial variability. In this site, the distribution of the contamination probability of four PAHs' showed a similar characteristic, and the areas with a probability of more than 45% were mainly distributed in production process workshops for coking, gas purification, tar products etc, of the central, northwest and southeast site with serious contamination, while the areas with a probability of less than 45% were mainly distributed in coal preparation, gas purification workshops of the southwest and northeast site. Based on the above analysis results, we can draw a conclusion that the forecast probability results are consistent with the occurrence and distribution of pollution sources, which is important for defining the remediation boundary and calculating the contaminated soil volume.