We present a laser-driven, bright, and broadband (50 to 1500 eV) soft-x-ray plasma source with <10 ps pulse duration. This source is employed in two complementary, laboratory-scale beamlines for time-resolved, magnetic resonant scattering and spectroscopy, as well as near-edge x-ray absorption fine-structure (NEXAFS) spectroscopy. In both beamlines, dedicated reflection zone plates (RZPs) are used as single optical elements to capture, disperse, and focus the soft x rays, reaching resolving powers up to E/ΔE > 1000, with hybrid RZPs at the NEXAFS beamline retaining a consistent E/ΔE > 500 throughout the full spectral range, allowing for time-efficient data acquisition. We demonstrate the versatility and performance of our setup by a selection of soft-x-ray spectroscopy and scattering experiments, which so far have not been possible on a laboratory scale. Excellent data quality, combined with experimental flexibility, renders our approach a true alternative to large-scale facilities, such as synchrotron-radiation sources and free-electron lasers.
We present time-resolved scanning x-ray microscopy measurements with picosecond photo-excitation via a tailored infrared pump laser at a scanning transmission x-ray microscope. Specifically, we image the laser-induced demagnetization and remagnetization of thin ferrimagnetic GdFe films proceeding on a few nanoseconds timescale. Controlling the heat load on the sample via additional reflector and heatsink layers allows us to conduct destruction-free measurements at a repetition rate of 50 MHz. Near-field enhancement of the photo-excitation and controlled annealing effects lead to laterally heterogeneous magnetization dynamics which we trace with 30 nm spatial resolution. Our work opens new opportunities to study photo-induced dynamics on the nanometer scale, with access to picosecond to nanosecond time scales, which is of technological relevance, especially in the field of magnetism.
Magnetic skyrmions are quasiparticles with nontrivial topology, envisioned to play a key role in next-generation data technology while simultaneously attracting fundamental research interest due to their emerging topological charge. In chiral magnetic multilayers, current-generated spin-orbit torques or ultrafast laser excitation can be used to nucleate isolated skyrmions on a picosecond time scale. Both methods, however, produce randomly arranged skyrmions, which inherently limits the precision on the location at which the skyrmions are nucleated. Here, we show that nanopatterning of the anisotropy landscape with a He+-ion beam creates well-defined skyrmion nucleation sites, thereby transforming the skyrmion localization into a deterministic process. This approach allows control of individual skyrmion nucleation as well as guided skyrmion motion with nanometer-scale precision, which is pivotal for both future fundamental studies of skyrmion dynamics and applications.
We present an optical parametric chirped pulse amplification (OPCPA) system delivering 4.4 TW pulses centered at 810 nm with a sub-9 fs duration and a carrier-envelope phase stability of 350 mrad. The OPCPA setup pumped by sub-10 ps pulses from two Yb:YAG thin-disk lasers at 100 Hz repetition rate is optimized for a high conversion-efficiency. The terawatt pulses of the OPCPA are utilized for generating intense extreme ultraviolet (XUV) pulses by high-order harmonic generation, achieving XUV pulse energies approaching the microjoule level.
A regenerative amplifier based on thin-disk technology has been upgraded and optimized. Within a CPA laser system chirped 1 ns pulses are amplified to more than 300 mJ pulse energy. In addition to the high pulse energy the amplifier shows a very good energy stability with 0.25% (rms) fluctuation as well as an excellent beam quality of M(2) = 1.04. The regenerative amplifier is equipped with an Yb:YAG thin-disk of 17 mm in diameter pumped with 1.75 kW peak power. It is operated at a repetition rate of 100 Hz. The optical-to-optical efficiency is better than 18%. The laser pulses are compressed to 1.8 ps pulse duration.
A CPA laser system for high pulse energy at high average power has been developed. The system is based on Yb:YAG thin-disk technology. It provides two laser beams with more than 500 mJ pulse energy each at 100 Hz repetition rate and 2 ps pulse duration. The system consists of a common oscillator, a grating stretcher and compressor and two identical amplifier chains that are both equipped with a regenerative amplifier and a ring amplifier. The compressor supports an individual alignment of the dispersion for the two laser channels.
The upgraded photoinjector drive laser of the free-electron laser facility FLASH at DESY Hamburg is described in this paper. This laser produces trains of 800 and 2400 ultraviolet picosecond pulses at 1 MHz and 3 MHz repetition rate in the trains, respectively. The amplifying elements of the system are Nd:YLF-rods, which are pumped by fiber-coupled semiconductor diodes. Compared to the flashlamp-pumped photocathode laser previously used at FLASH, the new diode-pumped laser features a better reliability and a significantly improved stability of its pulse parameters.
Amplifiers, Electronic , Fiber Optic Technology/instrumentation , Lasers, Semiconductor , Equipment Design , Equipment Failure Analysis
A superconducting radio frequency (SRF) photoelectron injector is currently under construction by a collaboration of BESSY, DESY, FZD, and MBI. The project aims at the design and setup of a continuous-wave SRF injector including a diagnostics beamline for the ELBE free electron laser (FEL) and to address R&D issues on low emittance injectors for future light sources such as the BESSY FEL. Of critical importance for the injector performance is the control of the electron beam parameters. For this reason a compact diagnostics beamline is under development, serving a multitude of operation settings. In this paper the layout and the rationale of the diagnostics beamline are described. Furthermore detailed information on specific components is given, together with results from laboratory tests and data taking.
This paper deals with the pulse-shaping properties of birefringent filters that feature an optical layout similar to a Solc fan filter. A simple computational model is given that explains the pulse-shaping process in the fan filter in two steps: First, the input pulse is split into several mutually delayed replicas due to the birefringence of the crystals. Second, these replicas interfere at the output polarizer of the filter and form the shaped output pulse. Fine-tuning of the phases of the replicas of the input pulse is permitted by tuning the temperature of the crystals. A birefringent pulse shaper containing ten birefringent crystals was investigated experimentally. The shape of the output pulses was measured by means of a special cross-correlation technique. Although a variety of pulse shapes can be generated with the described filter, it is particularly well suited for generation of flattop pulses featuring a 20-ps-long plateau and rising and falling edges shorter than 2 ps.
Computer-Aided Design , Fiber Optic Technology/instrumentation , Filtration/instrumentation , Lasers , Models, Theoretical , Signal Processing, Computer-Assisted/instrumentation , Birefringence , Computer Simulation , Equipment Design , Equipment Failure Analysis
