RESUMEN
The structural features of cobalt-based oxygen evolution catalysts are elucidated by combining high-field MAS NMR spectroscopy and DFT calculations. The superior photocatalytic activity of the heterogeneous system over its homogeneous counterpart is rationalised by the structural features. The higher activity is caused by a more favourable electron-withdrawing character of the framework.
RESUMEN
The catalytic activity of multifunctional, microporous materials is directly linked to the spatial arrangement of their structural building blocks. Despite great achievements in the design and incorporation of isolated catalytically active metal complexes within such materials, a detailed understanding of their atomic-level structure and the local environment of the active species remains a fundamental challenge, especially when these latter are hosted in non-crystalline organic polymers. Here, we show that by combining computational chemistry with pair distribution function analysis, 129 Xe NMR, and Dynamic Nuclear Polarization enhanced NMR spectroscopy, a very accurate description of the molecular structure and confining surroundings of a catalytically active Rh-based organometallic complex incorporated inside the cavity of amorphous bipyridine-based porous polymers is obtained. Small, but significant, differences in the structural properties of the polymers are highlighted depending on their backbone motifs.
RESUMEN
Covalent triazine frameworks (CTFs) are a class of porous organic polymers that continuously attract growing interest because of their outstanding chemical and physical properties. However, the control of extended porous organic framework structures at the molecular scale for a precise adjustment of their properties has hardly been achieved so far. Here, we present a series of bipyridine-based CTFs synthesized through polycondensation, in which the sequence of specific building blocks is well controlled. The reported synthetic strategy allows us to tailor the physicochemical features of the CTF materials, including the nitrogen content, the apparent specific surface area, and optoelectronic properties. Based on a comprehensive analytical investigation, we demonstrate a direct correlation of the CTF bipyridine content with the material features such as the specific surface area, band gap, charge separation, and surface wettability with water. The entirety of these parameters dictates the catalytic activity as demonstrated for the photocatalytic hydrogen evolution reaction (HER). The material with the optimal balance between optoelectronic properties and highest hydrophilicity enables HER production rates of up to 7.2 mmol/(h·g) under visible light irradiation and in the presence of a platinum cocatalyst.
RESUMEN
Heterogenization of molecular catalysts via their immobilization within extended structures often results in a lowering of their catalytic properties due to a change in their coordination sphere. Metal-organic polyhedra (MOP) are an emerging class of well-defined hybrid compounds with a high number of accessible metal sites organized around an inner cavity, making them appealing candidates for catalytic applications. Here, we demonstrate a design strategy that enhances the catalytic properties of dirhodium paddlewheels heterogenized within MOP (Rh-MOP) and their three-dimensional assembled supramolecular structures, which proved to be very efficient catalysts for the selective photochemical reduction of carbon dioxide to formic acid. Surprisingly, the catalytic activity per Rh atom is higher in the supramolecular structures than in its molecular sub-unit Rh-MOP or in the Rh-metal-organic framework (Rh-MOF) and yields turnover frequencies of up to 60 h-1 and production rates of approx. 76 mmole formic acid per gram of the catalyst per hour, unprecedented in heterogeneous photocatalysis. The enhanced catalytic activity is investigated by X-ray photoelectron spectroscopy and electrochemical characterization, showing that self-assembly into supramolecular polymers increases the electron density on the active site, making the overall reaction thermodynamically more favorable. The catalyst can be recycled without loss of activity and with no change of its molecular structure as shown by pair distribution function analysis. These results demonstrate the high potential of MOP as catalysts for the photoreduction of CO2 and open a new perspective for the electronic design of discrete molecular architectures with accessible metal sites for the production of solar fuels.
RESUMEN
We present a toolbox for the rapid characterisation of powdered samples of paramagnetic metal-organic frameworks at natural abundance by 1 H-detected solid-state NMR. Very fast MAS rates at room and cryogenic temperatures and a set of tailored radiofrequency irradiation schemes help overcome the sensitivity and resolution limits often associated with the characterisation of MOF materials. We demonstrate the approach on DUT-8(Ni), a framework containing Ni2+ paddle-wheel units which can exist in two markedly different architectures. Resolved 1 H and 13 Câ resonances of organic linkers are detected and assigned in few hours with only 1-2â mg of sample at natural isotopic abundance, and used to rapidly extract information on structure and local internal dynamics of the assemblies, as well as to elucidate the metal electronic properties over an extended temperature range. The experiments disclose new possibilities for describing local and global structural changes and correlating them to electronic and magnetic properties of the assemblies.
RESUMEN
The molecular-level structuration of two full photosystems into conjugated porous organic polymers is reported. The strategy of heterogenization gives rise to photosystems which are still fully active after 4â days of continuous illumination. Those materials catalyze the carbon dioxide photoreduction driven by visible light to produce up to three grams of formate per gram of catalyst. The covalent tethering of the two active sites into a single framework is shown to play a key role in the visible light activation of the catalyst. The unprecedented long-term efficiency arises from an optimal photoinduced electron transfer from the light harvesting moiety to the catalytic site as anticipated by quantum mechanical calculations and evidenced by in situ ultrafast time-resolved spectroscopy.
RESUMEN
A molecular catalyst [Cp*Rh(4,4'-bpydc)]2+ and a molecular photosensitizer [Ru(bpy)2 (4,4'-bpydc)]2+ (bpydc=bipyridinedicarboxylic acid) were co-immobilized into the highly porous metal-organic framework MIL-101-NH2 (Al) upon easy postsynthetic impregnation. The Rh-Ru@MIL-101-NH2 composite allows the reduction of CO2 under visible light, while exhibiting remarkable selectivity with the exclusive production of formate. This Rh-Ru@MIL-101-NH2 solid represents the first example of MOFs functionalized with both a catalyst and a photosensitizer in a noncovalent fashion. Thanks to the coconfinement of the catalyst and photosensitizer into the cavity's nanospace, the MOF pores are used as nanoreactors and enable molecular catalysis in a heterogeneous manner.
RESUMEN
A series of copper and 1,3-phenylebis(azanetriyl)tetrabenzoate based MOFs were obtained by postsynthetic modification of DUT-71 (DUT = Dresden University of Technology) using various nitrogen containing, neutral ligands to afford the compounds DUT-74, DUT-95, DUT-112, and DUT-114. The structure of the new MOFs DUT-112 and DUT-114 was solved from synchrotron X-ray single-crystal diffraction data. Both structures are tetragonal (P4/mnc) but differ slightly in the lattice parameters. All materials show specific shifts in absorption bands in solid state UV/vis spectra as a response to the exposure to various analytes. Analyzing this shift, it was possible to distinguish between solvents differing in polarity. Moreover, the determination of the polar analyte content in the excess of lower polarity solvent at low concentrations of 0.01 wt % is feasible.
RESUMEN
The addition of a CO2 -adsorption component (substituted imidazolate-based SIM-1 crystals) to a gas-diffusion layer-type catalytic electrode enhances the activity and especially the selectivity towards >C1 carbon chain products (ethanol, acetone, and isopropanol) of a Pt-based electrocatalyst that is not able to form products of CO2 reduction involving C-C bond formation under conventional (liquid-phase) conditions. This indicates that the increase of the effective CO2 concentration at the electrode active surface is the factor controlling the formation of >C1 products rather than only the intrinsic properties of the electrocatalyst.
Asunto(s)
Dióxido de Carbono/química , Carbono/química , Platino (Metal)/química , 2-Propanol/química , Acetona/química , Adsorción , Catálisis , Difusión , Técnicas Electroquímicas , Electrodos , Etanol/química , Oxidación-Reducción , Propiedades de SuperficieRESUMEN
Photoacoustic Fourier-transform infrared spectroscopy makes it possible to determine the organic composition of mixed-linker metal-organic frameworks. The sound produced upon IR irradiation enables the discrimination of azido and amino linkers in three different MOF platforms with a sensitivity that is two orders of magnitude higher than that achieved using classic IR analysis.
RESUMEN
We show full Li/S cells with the use of balanced and high capacity electrodes to address high power electro-mobile applications. The anode is made of an assembly comprising of silicon nanowires as active material densely and conformally grown on a 3D carbon mesh as a light-weight current collector, offering extremely high areal capacity for reversible Li storage of up to 9 mAh/cm(2). The dense growth is guaranteed by a versatile Au precursor developed for homogenous Au layer deposition on 3D substrates. In contrast to metallic Li, the presented system exhibits superior characteristics as an anode in Li/S batteries such as safe operation, long cycle life and easy handling. These anodes are combined with high area density S/C composite cathodes into a Li/S full-cell with an ether- and lithium triflate-based electrolyte for high ionic conductivity. The result is a highly cyclable full-cell with an areal capacity of 2.3 mAh/cm(2), a cyclability surpassing 450 cycles and capacity retention of 80% after 150 cycles (capacity loss <0.4% per cycle). A detailed physical and electrochemical investigation of the SiNW Li/S full-cell including in-operando synchrotron X-ray diffraction measurements reveals that the lower degradation is due to a lower self-reduction of polysulfides after continuous charging/discharging.
RESUMEN
The crystal structure of a new bismuth-based light-absorbing material for the application in solar cells was determined by single crystal X-ray diffraction for the first time. (CH3NH3)3(Bi2I9) (MBI) is a promising alternative to recently rapidly progressing hybrid organic-inorganic perovskites due to the higher tolerance against water and low toxicity. Single crystal X-ray diffraction provides detailed structural information as an essential prerequisite to gain a fundamental understanding of structure property relationships, while powder diffraction studies demonstrate a high degree of crystallinity in thin films.
RESUMEN
Metal-organic frameworks (MOFs) are promising materials for gas-separation and air-filtration applications. However, for these applications, MOF crystallites need to be incorporated in robust and manageable support materials. We used chitin-based networks from a marine sponge as a non-toxic, biodegradable, and low-weight support material for MOF deposition. The structural properties of the material favor predominant nucleation of the MOF crystallites at the inside of the hollow fibers. This composite has a hierarchical pore system with surface areas up to 800â m(2) g(-1) and pore volumes of 3.6â cm(3) g(-1) , allowing good transport kinetics and a very high loading of the active material. Ammonia break-through experiments highlight the accessibility of the MOF crystallites and the adsorption potential of the composite indicating their high potential for filtration applications for toxic industrial gases.
Asunto(s)
Filtros de Aire , Contaminantes Atmosféricos/aislamiento & purificación , Amoníaco/aislamiento & purificación , Quitina/química , Compuestos Organometálicos/química , Adsorción , Animales , Poríferos/química , PorosidadRESUMEN
Triple resonance solid-state NMR experiments using the spin combination (1)H-(13)C-(29)Si are still rarely found in the literature. This is due to the low natural abundance of the two heteronuclei. Such experiments are, however, increasingly important to study hybrid materials such as biosilica and others. A suitable model substance, ideally labeled with both (13)C and (29)Si, is thus very useful to optimize the experiments before applying them to studies of more complex samples such as biosilica. Tetraphenoxysilane could be synthesized in an easy, two-step synthesis including double isotope labelling. Using tetraphenoxysilane, we established a (1)H-(13)C-(29)Si double CP-based HETCOR experiment and applied it to diatom biosilica from the diatom species Thalassiosira pseudonana. Furthermore, we carried out (1)H-(13)C{(29)Si} CP-REDOR experiments in order to estimate the distance between the organic matrix and the biosilica. Our experiments on diatom biosilica strongly indicate a close contact between polyamine-containing parts of the organic matrix and the silica. This corroborates the assumption that the organic matrix is essential for the control of the cell wall formation.
Asunto(s)
Pared Celular/química , Diatomeas/citología , Espectroscopía de Resonancia Magnética/métodos , Compuestos Orgánicos/química , Dióxido de Silicio/química , Modelos Moleculares , Conformación MolecularRESUMEN
Conductive polymers showing stretchable and transparent properties have received extensive attention due to their enormous potential in flexible electronic devices. Here, we demonstrate a facile and smart strategy for the preparation of structurally stretchable, electrically conductive, and optically semitransparent polyaniline-containing hybrid hydrogel networks as electrode, which show high-performances in supercapacitor application. Remarkably, the stability can extend up to 35,000 cycles at a high current density of 8 A/g, because of the combined structural advantages in terms of flexible polymer chains, highly interconnected pores, and excellent contact between the host and guest functional polymer phase.
RESUMEN
A novel approach for the fabrication of metal coated micro- and nanoparticles by functionalization with a thin polydopamine layer followed by electroless plating is reported. The particles are initially coated with polydopamine via self-polymerization. The resulting polydopamine coated particles have a surface rich in catechols and amino groups, resulting in a high affinity toward metal ions. Thus, they provide an effective platform for selective electroless metal deposition without further activation and sensitization steps. The combination of a polydopamine-based functionalization with electroless plating ensures a simple, scalable, and cost-effective metal coating strategy. Silver-plated tungsten carbide microparticles, copper-plated tungsten carbide microparticles, and copper-plated alumina nanoparticles were successfully fabricated, showing also the high versatility of the method, since the polymerization of dopamine leads to the formation of an adherent polydopamine layer on the surface of particles of any material and size. The metal coated particles produced with this process are particularly well suited for the production of metal matrix composites, since the metal coating increases the wettability of the particles by the metal, promoting their integration within the matrix. Such composite materials are used in a variety of applications including electrical contacts, components for the automotive industries, magnets, and electromagnetic interference shielding.
Asunto(s)
Indoles/química , Metales/química , Nanopartículas , Polímeros/química , Microscopía Electrónica de Rastreo , Microscopía Electrónica de Transmisión , Difracción de Rayos XRESUMEN
Packed with energy: Amorphous covalent triazine-based frameworks were used as a cathode material, with the aim of developing an energy storage principle that can deliver a 2-3 times higher specific energy than current batteries with a high rate capability. The material undergoes a unique Faradaic reaction, as it can be present in both a p-doped and an n-doped state (see picture).
RESUMEN
The surface hydroxyl content and surface structure of silica and other oxides with and without surface modification were systematically studied by solid state (29)Si NMR, thermogravimetric analysis, and the lithium alanate method. Aerosil 90 as a well described reference system and functionalized zirconia-silica particles were used in the validation of the lithium alanate method. 3-Methacryloxypropyltrimethoxysilane and dodecylphosphonic acid were applied as surface modifiers. The determination of silanol content of Aerosil 90 by (29)Si NMR and TGA confirms the results obtained by the lithium alanate method, which also allows for the determination of the remaining surface hydroxyl content after surface modification. For both silane coupling agents, the residual hydroxyl content of modified zirconia-silica is decreased by a factor of approximately 2 compared with that of the unmodified mixed oxide, whereas after modification with dodecylphosphonic acid, the hydroxyl content is slightly higher. These results are again in good agreement with those by (29)Si NMR confirming that the lithium alanate method is a reliable and easily practicable method for surface hydroxyl determination.