RESUMEN
AIM: The aim of this randomized, prospective, and clinical multicenter study was to compare the overall clinical performance of two restorative options over a 5-year period: individualized CAD/CAM abutments veneered with a hand-layered ceramic, and prefabricated zirconium dioxide abutments veneered with press ceramic and inserted into a single edentulous gap in the anterior maxilla. MATERIALS AND METHODS: Forty subjects were recruited from two universities: 20 from the University of XX and 20 from the University of XY. Each subject received an implant to restore a single edentulous gap in the maxillary anterior region (14-24 FDI). 20 patients were randomized into each Group. Group A received a one-piece single crown produced from a prefabricated zirconia abutment with pressed ceramic and Group B received an individualized CAD/CAM zirconia abutment with a hand-layered technique. After 5 years, the aesthetic and radiographic parameters were assessed. RESULTS: Group A had four dropouts and one failure, resulting in a 95% survival rate and 95% success rate. Group B had two dropouts and two failures which resulted in a 90% survival rate and 90% success rate. No crestal bone level changes were observed, with a mean DIB of 0.06 mm in Group A and 0.09 mm in Group B. No statistically significant differences were present at baseline, 6 months, 1 year, 3 years, or 5 years for DIB values between time points and groups. Pink aesthetic score/white aesthetic score, Peri-Implant and Crown Index, and Implant Crown Aesthetic Index values were stable over time at all five points for both groups. CONCLUSION: Both implant-supported restorative options represent a valuable treatment option for the restoration of implant crowns in the anterior maxilla. CLINICAL SIGNIFICANCE: In general, the use of ceramic abutments in the anterior zone represents a valuable treatment procedure with both standardized and CAD/CAM individualized abutments and following the recommendations from the respective manufacturer(s).
Asunto(s)
Cerámica , Circonio , Humanos , Estudios Prospectivos , Coronas , Diseño Asistido por Computadora , Pilares Dentales , TitanioRESUMEN
OBJECTIVES: The aim of this study was to review available evidence for Type 1A (immediate implant placement and immediate loading) of single tooth replacement in the maxillary esthetic zone. MATERIALS AND METHODS: An electronic search was conducted utilizing the databases of MEDLINE, Embase, and Cochrane to identify publications reporting on the outcomes of Type 1A for single tooth replacement in the maxillary esthetic zone. The success and survival rates of the included articles were reported, which were further categorized according to the clinical criteria reported in Type 1A. Mean survival rates were univariately compared between risk groups and additionally between studies published before and since 2012 using bias-corrected and study size-weighed bootstrap tests. A study time-correcting meta-analysis was then performed to obtain an overall effect for the study pool. RESULTS: A total of 3118 publications were identified in the search, with a total of 68 articles included. A mean number of implants per study were 37.2 and mean follow-up was 2.8 years. All the included studies utilizing Type 1A report highly selective inclusion and exclusion criteria. Univariate risk group comparison determined that studies before 2012 report a significantly lower mean survival rate (difference of -1.9 percentage points [PP], 95% CI: [-0.3, -4.0], p = .02), facial gap dimension had an impact on survival rates (+3.1 PP [0.2, 5.3] for width >2 mm, p = .04), as well as presence of endodontic infection (+2.6 PP [0.9, 5.1], p = .004). CONCLUSIONS: Type 1A has a high survival rate in studies reporting strict patient and site selection criteria. Further research is required to assess esthetic and functional success with Type 1A treatments.
Asunto(s)
Implantes Dentales , Humanos , Selección de Paciente , Estética Dental , Bases de Datos FactualesRESUMEN
OBJECTIVES: Working Group 5 was convened to discuss and find consensus on the topics of implant placement and loading protocols associated with single missing teeth in the anterior maxilla (aesthetic zone). Consensus statements, clinical recommendations, patient perspectives and future research suggestions were developed and presented to the plenary for discussion and approval. MATERIALS AND METHODS: Two systematic reviews were developed and submitted prior to the conference. The group considered in detail the systematic reviews and developed statements, clinical recommendations, patient perspectives and future research suggestions based on the findings of the reviews and experience of group members. Definitive versions were developed after presentation to and discussion by the plenary. RESULTS: Five consensus statements were developed and approved from each systematic review. Twelve clinical recommendations were developed by the group based on both reviews and experience. Three patient perspectives were developed, and five suggestions made for future research. CONCLUSIONS: Based on the findings of the systematic reviews and experience of group members, the Type 1A protocol (immediate placement and immediate loading), when utilized in the anterior maxilla under favorable conditions, is considered predictable and is associated with high survival rates. The procedure is considered clinically viable and is associated with aesthetic outcomes, although surgical, technical, and biological complications can occur.
Asunto(s)
Implantes Dentales , Pérdida de Diente , Humanos , Consenso , Guías de Práctica Clínica como Asunto , Revisiones Sistemáticas como AsuntoRESUMEN
OBJECTIVES: The aim of this study was to assess the following PIO question: In adult patients treated with an indication for single tooth extraction in the maxillary esthetic zone (15-25), what is the influence of an immediate implant placement and immediate loading protocol on the clinical performance (primary aim) and esthetic outcomes (secondary aim) focusing on investigations published after 2010. MATERIAL AND METHODS: An electronic search in Medline (PubMed), the Cochrane Central Register of Controlled Trials, and EMBASE databases up to April 2022 was performed to identify clinical studies investigating the outcome of single implants subjected to immediate placement with immediate restoration/loading (Type 1A). RESULTS: Sixty-three studies (10 randomized controlled trials, 28 prospective and 25 retrospective cohort studies) were included with a follow-up ranging from 12 to 96 months. One thousand nine hundred sixty-one implants reported survival rates of 99.2 (98.6-99.5) % at 1 year, 97.5 (95.9-98.4) % after 3 years, and 95.8 (93.3-97.4) % after 5 years; 1064 immediately loaded restorations presented survival rates of 98.9 (97.8-99.5) % after 1 year, 96.8 (93.6-98.4) % after 2 years, and 94.8 (89.6-97.4) % after 5 years. Comparing baseline to 12-month data using the Hedges' g effect size (95% CI), papilla height presented an overall effect size of -0.71 (-1.25, -0.1) mm, midfacial recession change of -0.15 (-0.66, 0.36) mm, and a 0.82 (0.37, 1.28) gain in PES. CONCLUSIONS: Immediate implant placement and immediate loading can be considered a predictable and safe treatment option for single maxillary anterior restorations with adequate survival rates and favorable esthetics outcomes for up to 5 years.
Asunto(s)
Implantes Dentales , Adulto , Humanos , Estudios Prospectivos , Estudios Retrospectivos , Estética Dental , Bases de Datos FactualesRESUMEN
PURPOSE: Evaluating the distortion probability in impressions of completely dentate arches when different impression materials are used in relation to operator experience. MATERIAL AND METHODS: Twenty-eight students (group A) and 7 dentists (group B) performed 3 maxillary impressions on 28 students (participants), each using vinyl siloxane ether (VSE), polyether (PE), and irreversible hydrocolloid (IHC). Gypsum master casts were fabricated and subsequently digitized. Intraoral scans were taken as a control. Differences between master casts and intraoral scans were visualized by heatmaps and planar deviations were investigated. If planar deviations of >120 µm were found, the impression was rated as "distorted." An additional superimposition using the casts from VSE or PE was performed to confirm the presence of distortions. The relative number of surfaces with distortions in each impression was calculated. The procedure was repeated for a distortion threshold of 500 µm. The statistical analyses included measures ANOVA and post-hoc tests (a < 0.05). RESULTS: When 120 µm was considered as the threshold for distortions, IHC impressions showed higher distortion probability than PE impressions in group A (P = 0.003) and group B (P < 0.0001). In group B only, PE showed a lower distortion probability than VSE (P = 0.02). There was no difference between the study groups (P = 0.42). Considering 500 µm as a threshold for distortions, there was no difference between impression materials (P = 0.17) or study groups (P = 0.53). CONCLUSION: There were no statistic significant differences in relation to operator experience. Different impression materials had a significant impact on distortion probability. Polyether impressions showed the lowest distortion probability. Int J Prosthodont. 10.11607/ijp.8555.
RESUMEN
OBJECTIVES: To report a summary of published patient-reported esthetic outcome measures (PROMs) of implant-supported single crowns (SCs) compared with those of tooth-supported SCs. MATERIALS AND METHODS: Cochrane, Medline (PubMed), and EMBASE database search was performed by three reviewers on reports with patient-reported esthetic outcomes of tooth- and implant-supported SCs. Clinical studies with at least 12 months of mean follow-up period and a minimum of 10 patients, and English, French, or German reports were included. To compare the subgroups, for aggregate-level data, random-effects meta-regression was used. RESULTS: Two thousand fifteen titles were identified (initial search) and screened independently concluding 53 full-text articles to include in data extraction. Twenty-two studies with 29 study cohorts were included. Patients were satisfied with the esthetics of implant- and tooth- supported crowns Mean visual analogue scale (VAS) value from the PROMs data of 1270 implant-supported SCs evaluated by 1051 patients was 89.6% (80.0%-94.1%). The mean VAS value of patients (n = 201), who evaluated the esthetic outcome of 486 tooth-supported SCs was 94.4% (92.3%-96.0%). VAS scores of patients regarding their perception of esthetics did not show any difference among different crown materials or type of implant used. The patients' perception of esthetics focusing on SC had a tendency to be higher when the crowns were supported by teeth, however, no statistical difference was found when compared with implant-supported crowns (p = 0.067). CONCLUSIONS: Patient perception of esthetics in SCs was not affected by the type of support, crown material, implant, and presence of provisional crown for both implant- and tooth-supported SCs. CLINICAL SIGNIFICANCE: Despite that patient's expectations are increasing overall Patients are satisfied with with esthetic outcome of implant- and tooth-supported crowns.
Asunto(s)
Implantes Dentales de Diente Único , Humanos , Prótesis Dental de Soporte Implantado , Estética Dental , Coronas , Medición de Resultados Informados por el PacienteRESUMEN
OBJECTIVE: The purpose of this study was to evaluate the perception and role of orofacial esthetics by laypersons, and how attitudes may be correlated with age and gender in Switzerland. MATERIAL AND METHODS: Self-administrated questionnaires (SAQ) were distributed both conventionally and digitally to Swiss residents over 16 years of age (range 16-99 years). The participants were identified in the medical practice, at an open house of the ZMK Bern, in elderly care centers, and via the internet (Facebook and Instagram). To verify that the participants were Swiss residents and laypersons, they were checked by an operator (conventional) or were provided an exact description of eligible participants at the beginning of the SAQ (digital). The SAQ included 30 questions with multiple-choice responses and visual analogue scales (0-100) divided into four sections regarding dental appearance with respect to body esthetics, partner selection, employment and career opportunities, and overall health/quality-of-life. For statistical analysis, respondents were segregated into two age groups (<25 years and ≥25 years) and into two gender groups (male and female). Descriptive analyses, the Fisher exact test, and Welch's t-test were applied (α = 0.05). RESULTS: Five hundred and two laypersons completed the SAQ. The study's hypothesis-that various age groups and genders have different perceptions of dental esthetics-was supported. The willingness to correct one's own dentition was lower among older participants (OR: 0.54; p = 0.001); charisma and dental esthetics were considered equally important with a trend toward charisma in both age groups (p = 0.003). The belief that excellent dentition improves employment chances at a job interview (OR: 0.47; p = 0.0003) was significantly lower among older participants, and the belief that dental correction would improve quality-of-life was significantly higher among older participants (OR: 1.81; p = 0.001). The assumption that individuals with attractive teeth appear happier was significantly lower among older respondents (OR: 0.67; p = 0.03). Women were less satisfied with their dental appearance and, proportionally, their willingness to receive correction was significantly higher (OR: 1.79; p = 0.01 and OR: 1.77; p = 0.002 relative to men, respectively). Moreover, male participants had a lower desire to have brighter teeth and undergo bleaching treatments (OR: 0.54; p = 0.002; OR: 0.53; p = 0.002). The proportion of men believing that having beautiful teeth improves attractiveness and employment chances was significantly lower (OR: 0.33; p = 0.02 and OR: 0.66; p = 0.04; respectively). CONCLUSIONS: Within the limitations of this observational study, it was concluded that age and gender of laypersons in Switzerland have a significant impact on the perception of dental esthetics. CLINICAL SIGNIFICANCE: Evaluating and quantifying perceptions of dental esthetics for daily life across various age groups and genders can improve clinicians' understanding of individual needs in order to offer patient-oriented dental care.
Asunto(s)
Actitud Frente a la Salud , Estética Dental , Percepción , Adolescente , Adulto , Factores de Edad , Anciano , Anciano de 80 o más Años , Femenino , Humanos , Masculino , Persona de Mediana Edad , Factores Sexuales , Sonrisa , Encuestas y Cuestionarios , Suiza , Adulto JovenRESUMEN
STATEMENT OF PROBLEM: Vertical eruption of teeth adjacent to an implant has been reported clinically and might affect the esthetic outcome over time. The prevalence of the problem is unclear. PURPOSE: The purpose of this prospective clinical trial was to evaluate the vertical eruption of anterior maxillary teeth adjacent to single-implant crowns after a 3-year follow-up period. MATERIAL AND METHODS: Thirty single dental implants were inserted in maxillary anterior sites including the first premolar. The mean age of the participants at implant-supported crown insertion was 48.4 years (range 23 to 79 years). Each implant was restored with a 1-piece screw-retained ceramic single crown. The vertical changes of 60 adjacent anterior maxillary teeth were evaluated from periapical radiographs and casts at baseline, 6, 12, and 36 months. RESULTS: A global ANOVA test showed statistically significant differences for the outcomes of the distance-implant platform and cement-enamel junction (DPC) (P<.001), crown length distal (P=.021) and mesial (P=.035), implant crown length (P=.022), and incisal edge to edge (P<.001). CONCLUSIONS: Continuous vertical tooth eruption next to a single dental implant was observed in adult participants.
Asunto(s)
Implantes Dentales de Diente Único , Implantes Dentales , Adulto , Humanos , Adulto Joven , Persona de Mediana Edad , Anciano , Erupción Dental , Prótesis Dental de Soporte Implantado , Estudios de Seguimiento , Estética Dental , Coronas , Diente PremolarRESUMEN
OBJECTIVES: The present pilot study analyzed two abutment types (a retentive ball and a non-retentive dome) in implant-assisted removable partial dentures (IARPDs) on 6 mm short implants with respect to clinical, radiological, and patient-reported outcomes (PROs), during the first year. MATERIALS AND METHODS: Two implants were placed bilaterally in mandibular molar sites, converting existing free-end removable partial dentures (RPDs) to IARPDs. Twelve subjects were randomized to initially receive either the dome (Group A, n = 6) or the ball abutment (Group B, n = 6). After eight weeks, the abutments were exchanged. After another 8 weeks, the participants were given the choice of one of the abutments. Mean values and standard deviations (SD) were calculated, and random-effect linear regression analyses were applied to analyze marginal bone level alterations and PROs (α < .05). RESULTS: Twelve participants were included in the study; however, one dropout occurred. Patient ratings increased significantly in both study groups. The majority of the participants (82%) ultimately chose the ball abutment. The implant survival rate was 100%, and the success rate was 90.9% twelve months after implant placement (mean peri-implant bone-loss: -1.2; SD: 0.6 mm) without a statistically significant difference between the study groups, in terms of clinical- and radiological outcomes. CONCLUSION: Placing 6 mm short implants at mandibular molar sites of RPD wearers seems to be a viable treatment option, based on this investigation with a short-term follow-up. Although only minor differences between the two abutments were observed, patients seem to prefer the ball over the dome abutment.
Asunto(s)
Implantes Dentales , Dentadura Parcial Removible , Estudios Cruzados , Pilares Dentales , Prótesis Dental de Soporte Implantado , Humanos , Proyectos Piloto , Distribución AleatoriaRESUMEN
OBJECTIVES: To analyze the retention forces between primary and secondary telescopic crowns milled from various materials and to compare them with the retention forces between cast telescopic crowns made of precious metal alloys. MATERIALS AND METHODS: Primary and secondary crowns (N = 60; n = 10 per group) were fabricated using various material combinations (1: zirconia [ZIR]/polyether ether ketone [PEEK]; 2: titanium grade IV [TI]/PEEK; 3: PEEK/PEEK; 4: non-precious alloy [NPA]/PEEK; 5:NPA/NPA), while precious alloy (PA) was used for the control group (6: PA/PA). The retention forces at 10, 1000, 5000, and 10,000 connection and disconnection cycles and the relative weights were analyzed, applying nonparametric repeated measures ANOVA and post hoc Mann-Whitney and Wilcoxon signed-rank tests (α < 0.05). RESULTS: Globally, significant differences in the retention forces among the materials (p < 0.0001), time points (p < 0.0001), and wear resistance for the various materials (p < 0.0001) were observed. No significant changes in retention forces compared to baseline were observed in groups 2, 4, 5, and 6. A significantly higher weight loss for both primary and secondary crowns was observed in groups 4 and 6. CONCLUSIONS: The material combination in telescopic attachments influences retention forces and wear. Interactions between materials and time were evident, indicating that the change in retention forces differs among the materials. The combinations of milled TI/PEEK and NPA/NPA qualify for further preclinical testing in a more clinically realistic setup, determining a material-specific double-crown design. CLINICAL RELEVANCE: The design of precious alloy telescopic crowns cannot be directly transferred to other milled material combinations due to different retention behaviors.
Asunto(s)
Diseño Asistido por Computadora , Coronas , Análisis del Estrés Dental , Ensayo de Materiales , CirconioRESUMEN
The purpose of this questionnaire-based survey was to evaluate the attitudes of the undergraduate dental students towards elders. The 14-item Geriatric attitudes scale (GAS) questionnaire, along with a 9-item questionnaire with specific questions on the current geriatric dental curriculum, confidence, and preference in treating the elderly patients were administered to the undergraduate dental students (3rd bachelor, 1st master, and 2nd master) in the four Swiss university dental schools. Mean GAS scores were calculated and inter- and intra-group differences were analyzed with ANOVA and post hoc tests (level of significance set at α=0.05). Responses to the 9-item questionnaire were reported descriptively. Further analyses were performed to evaluate the effect of demographic factors on the GAS scores. 305 students (meanage: 25.8±4.0y) participated in this study. The mean overall GAS score of the students was 3.5±0.4. There were no significant differences in the GAS scores between the centers [F(3, 300)=2.266, p=0.081] or between the year of training [F(2, 301)=1.884, p=0.154]. Demographic factors did not influence the GAS scores. Students considered geriatric dentistry as an important part of their dental undergraduate education. The current geriatric curriculum was perceived to be on an adequate level. Hands-on experience in treating geriatric patients in the undergraduate curriculum was positively opinionated, and mobile dental services for elders with limited access to care was considered a good solution. In conclusion, the attitudes of the Swiss undergraduate dental students towards an elderly patient seem acceptable but could still be improved.
RESUMEN
Edentulous patients may be restored with complete-arch implant-supported fixed complete dental prostheses (IFCDPs) on angled distal implants or on parallel implants distributed equally across the mandible to increase the area of support. A treatment is presented to introduce the clinical concept of providing edentulous patients with an implant-supported fixed complete dental prosthesison parallel tissue-level implants in the mandible with standard length implants interforaminally and ultrashort implants distally. A structured prosthetic approach was used for the tooth arrangement with a modified workflow as per the Biofunctional Prosthetic System adapted for static computer-aided implant surgery (s-CAIS) and computer-aided design and computer-aided manufacturing (CAD-CAM) of the screw-retained implant-supported fixed complete dental prosthesis. The concept offered advantages in challenging anatomic, surgical, and prosthetic conditions; providing distal nonangled abutments and implant platforms, which were straightforward to clean. If necessary, the prosthesis could have been easily converted into a removable overdenture using the existing digital prosthetic arrangement. Should implant removal be required, the extrashort implants can be removed with minimal surgical risk or morbidity.
Asunto(s)
Implantes Dentales , Arcada Edéntula , Diseño Asistido por Computadora , Diseño de Prótesis Dental , Prótesis Dental de Soporte Implantado , Prótesis de Recubrimiento , Estudios de Seguimiento , Humanos , Arcada Edéntula/cirugía , Mandíbula/cirugíaRESUMEN
OBJECTIVES: This retrospective clinical study investigates the frequency of biological and technical complications in patients rehabilitated by natural root-retained overdentures (RODs) with cast post-and-cores (root caps) wearing precision attachments and analyses factors influencing complication rates (e.g. oral hygiene routines). MATERIALS AND METHODS: Patients formerly treated with RODs were invited for a cost-free clinical visit to evaluate their intraoral status. Furthermore, they were interviewed and patient records were screened for complications occurring since denture delivery. Statistical models include descriptive analyses, Fisher's exact test, odds ratios, and a multivariate regression model. RESULTS: A total of 114 patients wearing 128 RODs with a total of 280 abutment teeth were evaluated (mean service time: 7.9 years). Technical complications occurred in 68.8% of the RODs, with matrix loosening being the most frequent complication (50.1%). Biological complications occurred in 53.9% of all RODs, with the presence of denture stomatitis being the most common biological complication (38.3%). The presence of denture stomatitis was significantly higher in the maxilla relative to the mandible (p = 0.0029), in subjects cleaning their dentures less than twice a day (p < 0.001), in subjects regularly using CHX-containing products (p = 0.036) and in subjects with a plaque index > 40% (p < 0.001). CONCLUSIONS: Root cap-retained overdentures with precision attachments are a viable treatment option in partially dentate subjects, even over long-term periods. However, high complication rates should be expected. CLINICAL RELEVANCE: Establishing good oral hygiene is a decisive factor in preventing complications in RODs. Furthermore, CHX-containing products may not be recommended for routine domestic use.
Asunto(s)
Retención de Dentadura , Prótesis de Recubrimiento , Prótesis Dental de Soporte Implantado , Humanos , Mandíbula , Estudios RetrospectivosRESUMEN
OBJECTIVES: New generation intraoral scanners are promoted to be suitable for digital scans of long-span edentulous spaces and completely edentulous arches; however, the evidence is lacking. The current study evaluated the accuracy of intraoral scanning (IOS) in partially and completely edentulous arch models and analyzed the influence of operator experience on accuracy. MATERIALS AND METHODS: Four different resin models (completely and partially edentulous maxilla and mandible) were scanned, using a new generation IOS device (n = 20 each). Ten scans of each model were performed by an IOS-experienced and an inexperienced operator. An industrial high-precision scanner was employed to obtain reference scans. IOS files of each model-operator combination, their respective reference scan files (n = 10 each; total = 80), as well as the IOS files from each model generated by the same operator, were superimposed (n = 45; total = 360) to calculate trueness and precision. An ANOVA for mixed models and post hoc t tests for mixed models were used to assess group-wise differences (α = 0.05). RESULTS: The median overall trueness and precision were 24.2 µm (IQR 20.7-27.4 µm) and 18.3 µm (IQR 14.4-22.1 µm), respectively. The scans of the inexperienced operator had significantly higher trueness in the edentulous mandibular model (p = 0.0001) and higher precision in the edentulous maxillary model (p = 0.0004). CONCLUSION: The accuracy of IOS for partially and completely edentulous arches in in vitro settings was high. Experience with IOS had small influence on the accuracy of the scans. CLINICAL RELEVANCE: IOS with the tested new generation intraoral scanner may be suitable for the fabrication of removable dentures regardless of clinician's experience in IOS.
Asunto(s)
Técnica de Impresión Dental , Modelos Dentales , Diseño Asistido por Computadora , Imagenología Tridimensional , Mandíbula/diagnóstico por imagen , Maxilar/diagnóstico por imagenRESUMEN
Various treatments have been used to change both the topography and chemistry of titanium surfaces, aiming to enhance tissue response and reduce healing times of endosseous implants. Most studies to date focused on bone healing around dental implants occurring later during the healing cascade. However, the impact of the initial inflammatory response in the surgical wound site on the success and healing time of dental implants is crucial for implant integration and success, yet it is still poorly understood. The purpose of this study was to investigate the effect of titanium surface hydrophilicity on the response of human neutrophils by monitoring oxygen radical production, which was measured as chemiluminescence activity. Materials and Methods: Neutrophils were isolated from human donors' blood buffy coats using the double sucrose gradient method. Neutrophils were exposed to both hydrophilic and hydrophobic titanium surfaces with identical topographies in the presence and absence of human serum. This resulted in six experimental groups including two different implant surfaces, with and without exposure to human serum, and two control groups including an active control with cells alone and a passive control with no cells. Two samples from each group were fixed and analyzed by SEM. Comparisons between surface treatments for differences in chemiluminescence values were performed using analysis of variance ANOVA. Results and Conclusion: In the absence of exposure to serum, there was no significant difference noted between the reaction of neutrophils to hydrophilic and hydrophobic surfaces. However, there was a significant reduction in the mean and active chemiluminescence activity of neutrophils to serum-coated hydrophilic titanium surfaces than to serum-coated hydrophobic titanium surfaces. This suggests that surface hydrophilicity promotes enhanced adsorption of serum proteins, which leads to decreased provocation of initial immune cells and reduction of local oxygen radical production during wound healing. This can help explain the faster osseointegration demonstrated by hydrophilic titanium implants.
RESUMEN
OBJECTIVE: The aim of this randomized multicenter clinical trial was to evaluate and compare the performance of anterior all-ceramic implant crowns based either on prefabricated zirconia abutments veneered with pressed ceramics or on CAD/CAM zirconia abutments veneered with the hand build-up technique. The null hypothesis was that there is no statistically significant difference between the two study groups. MATERIAL AND METHODS: Forty implants were inserted in sites 14-24 (World Dental Federation [FDI]) in two centers, the Universities of Bern and Geneva, Switzerland. Twenty patients each were randomized into either Group A and restored with one-piece single crown made of a prefabricated zirconia abutment with pressed ceramic, or Group B using an individualized CAD/CAM zirconia abutment with the hand-layered technique. After 3 years, clinical, esthetic, and radiographic parameters were assessed. RESULTS: Group A exhibited one dropout patient and one failure resulting in a survival rate of 89% after 3 years and two failures for Group B (90%). Clinical parameters presented healthy peri-implant soft tissues. Overall, no crestal bone level changes were observed (mean DIB of 0.13 mm [Group A] and 0.24 mm [Group B]). There were no significant differences at baseline, 6 months, and 1 and 3 years for DIB values between the two groups. PES and WES values evaluated at all three time points indicated stability over time for both groups and pleasing esthetic outcomes. CONCLUSIONS: Both implant-supported prosthetic pathways represent a valuable treatment option for the restoration of implant crowns in the anterior maxilla.
Asunto(s)
Implantes Dentales , Fracaso de la Restauración Dental , Cerámica , Coronas , Pilares Dentales , Prótesis Dental de Soporte Implantado , Estética Dental , Humanos , Suiza , Flujo de Trabajo , CirconioRESUMEN
OBJECTIVE: The aim of this study was to evaluate the effect of three different macrodesigns and two different insertion devices on the accuracy of static computer-assisted implant surgery (sCAIS). MATERIALS AND METHODS: Ninety implant replicas with three different macrodesigns: Soft tissue level (TL), bone level (BL), and bone level tapered (BLT) were placed in 30 dental models with two implant insertion devices: Guided adapter and guided screwed-in mount. Preoperative and postoperative positions of implants were compared and the mean angular deviation, crestal, and apical three-dimensional (3D) deviation were calculated for each implant macrodesign and each insertion device. Data were analyzed using analysis of variance, post hoc t-tests and Bonferroni-Holm's adjustment method. P values less than .05 were considered statistically significant. RESULTS: BLT implants had lower mean 3D deviation values at the crest and the apex when compared with 3D deviations with BL and TL implants (P < .05). Also, BLT implants had lower angular deviations, when compared with BL and TL Implants, however, angular deviations were not statistically significant (P > .05). Considering the insertion device method, no significant differences were noted between insertion devices irrespective of the deviation analyzed. CONCLUSION: The macrodesign of dental implants may have an influence on the accuracy of sCAIS, with tapered designs offering slightly better positional accuracy than parallel-walled macrodesigns independent on the method of insertion used.
Asunto(s)
Implantes Dentales , Cirugía Asistida por Computador , Diseño Asistido por Computadora , Implantación Dental Endoósea , Modelos DentalesRESUMEN
OBJECTIVES: The aim of this investigation was to evaluate whether the use of a provisional implant-supported crown improves the final esthetic outcome of implant crowns that are placed within esthetic sites. MATERIALS AND METHODS: Twenty endosseous implants were inserted in sites 13 to 23 (FDI) in 20 patients. Following the reopening procedure, a randomization process assigned them to either cohort group 1: a provisional phase with soft tissue conditioning using the "dynamic compression technique" or cohort group 2: without a provisional phase. Screw-retained all ceramic crowns were inserted. Clinical follow-up appointments were completed at 36 months evaluating clinical, radiographic outcomes, and implant success and survival. RESULTS: After 3 years, all implants survived; one implant-supported crown was excluded from the study due to adjacent tooth failure replaced with a further implant supported crown. Modified pink esthetic score (ModPES) scores were significantly different between groups 1 and 2 (P = .018); white esthetic scores (WES) were not statistically different between both groups (P = .194). Mean values of combined modPES and WES were 15.6 for group 1, with a SD of 3.20. Group 2 had a mean combined modPES and WES of 12.2, with a SD of 3.86. Mean bone loss after 3 year was -0.05 and -0.04 mm for groups 1 and 2 respectively, without being statistically significant. CONCLUSION: Fixed implant-supported provisionals improve the final esthetic outcome of the peri-implant mucosa.
Asunto(s)
Coronas , Implantes Dentales de Diente Único , Estética Dental , Implantación Dental Endoósea , Prótesis Dental de Soporte Implantado , Estética , Humanos , Resultado del TratamientoRESUMEN
OBJECTIVES: The aim of this systematic review and meta-analysis was to summarize the existing evidence on patient-reported aesthetic outcome measures (PROMs) of implant-supported, relative to tooth-supported fixed dental prostheses. MATERIAL AND METHODS: In April 2017, two reviewers independently searched the Medline (PubMed), EMBASE, and Cochrane electronic databases, focusing on studies including patient-reported aesthetic outcomes of implant- and tooth-supported fixed dental prostheses (FDPs). Human studies with a mean follow-up period of at least 1 year, a minimum of ten patients, and English, German, or French publication were included. For the comparison of subgroups, random-effects meta-regression for aggregate-level data was used. RESULTS: The systematic search for implant-supported prostheses focusing on patient-reported outcomes identified 2,675 titles, which were screened by two independent authors. Fifty full-text articles were analyzed, and finally, 16 publications (including 19 relevant study cohorts) were included. For tooth-supported prostheses, no studies could be included. A total of 816 implant-supported reconstructions were analyzed by patients. Overall aesthetic evaluation by the patients' visual analogue scale (VAS) rating was high in implant-supported FDPs (median: 90.3; min-max: 80.0-94.0) and the surrounding mucosa (median: 84.7; min-max: 73.0-92.0). Individual restorative materials, implant neck design (i.e., tissue or bone level type implants), and the use of a fixed provisional had no effect on patients' ratings of the definitive implant-supported FDPs. CONCLUSIONS: Aesthetics is an important patient-reported measure, which lacks in standardized methods; however, patients' satisfaction was high for implant- supported FDPs and the surrounding mucosa.
Asunto(s)
Diseño de Prótesis Dental , Prótesis Dental de Soporte Implantado , Dentadura Parcial Fija , Estética Dental , Medición de Resultados Informados por el Paciente , Coronas , Bases de Datos Factuales , Diseño de Implante Dental-Pilar , Implantes Dentales , Implantes Dentales de Diente Único , Materiales Dentales , Fracaso de la Restauración Dental , HumanosRESUMEN
OBJECTIVES: The aim of Working Group 3 was to focus on three topics that were assessed using patient-reported outcome measures (PROMs). These topics included the following: (a) the aesthetics of tooth and implant-supported fixed dental prostheses focusing on partially edentulous patients, (b) a comparison of fixed and removable implant-retained prostheses for edentulous populations, and (c) immediate versus early/conventional loading of immediately placed implants in partially edentate patients. PROMs include ratings of satisfaction and oral health-related quality of life (QHRQoL), as well as other indicators, that is, pain, general health-related quality of life (e.g., SF-36). MATERIALS AND METHODS: The Consensus Conference Group 3 participants discussed the findings of the three systematic review manuscripts. Following comprehensive discussions, participants developed consensus statements and recommendations that were then discussed in larger plenary sessions. Following this, any necessary modifications were made and approved. RESULTS: Patients were very satisfied with the aesthetics of implant-supported fixed dental prostheses and the surrounding mucosa. Implant neck design, restorative material, or use of a provisional restoration did not influence patients' ratings. Edentulous patients highly rate both removable and fixed implant-supported prostheses. However, they rate their ability to maintain their oral hygiene significantly higher with the removable prosthesis. Both immediate provisionalization and conventional loading receive positive patient-reported outcomes. CONCLUSIONS: Patient-reported outcome measures should be gathered in every clinical study in which the outcomes of oral rehabilitation with dental implants are investigated. PROMs, such as patients' satisfaction and QHRQoL, should supplement other clinical parameters in our clinical definition of success.