RESUMEN
We quantify endocytosis-like nanoparticle (NP) uptake of model membranes as a function of temperature and, therefore, phase state. As model membranes, we use giant unilamellar vesicles (GUV) consisting of 1,2-dipentadecanoyl-sn-glycero-3-phosphocholine (15:0 PC). Time-series micrographs of the vesicle shrinkage show uptake rates that are a highly nonlinear function of temperature. A global maximum appears close to the main structural phase transition at T = Tm + 3 K = 37 °C and a minor peak at the pretransition T = Tp = 22 °C. The quality of linear fits to the shrinkage, and thus uptake kinetics, reveals a deviation from the linear trend at the vesicle shrinkage peaks. Taking values for the bending modulus as a function of temperature from literature and Helfrich's model allows us to draw qualitative conclusions on the membrane tension and the adhesion of the NP to the membrane as a function of temperature. These findings provide valuable insights into the dynamic interplay between temperature, membrane phase transitions, and NP uptake, shedding light on the complex behavior of biological membranes.
RESUMEN
With a view on adding to their use in trace gas sensing, we perform a combined experimental and theoretical study of the change of the conductivity of a metal organic framework (iron (1,2,3)-triazolate, Fe(ta)2) with the uptake of chemically inert gases. To align our first-principles calculations with experimental measurements, we perform an ensemble average over different microscopic arrangements of the gas molecules in the pores of the metal-organic framework (MOF). Up to the experimentally reachable limit of gas uptake, we find a good agreement between both approaches. Thus, we can employ theory to further interpret our experimental results in terms of changes to the parameters of the Bardeen-Shockley band theory, electron-phonon coupling (in the form of the deformation potential), bulk modulus, and carrier effective mass. We find the first of these to be most strongly influenced through the gas uptake. Furthermore, we find the changes to the deformation potential to strongly depend on the individual microscopic arrangements of molecules in the pores of the MOF. This hints at a possible synthetic engineering of the material, e.g., by closing off certain pores, for a stronger, more interpretable electric response upon gas sorption.
RESUMEN
Direct conversion of X-ray irradiation using a semiconductor material is an emerging technology in medical and material sciences. Existing technologies face problems, such as sensitivity or resilience. Here, we describe a novel class of X-ray sensors based on GaN thin film and GaN/AlGaN high-electron-mobility transistors (HEMTs), a promising enabling technology in the modern world of GaN devices for high power, high temperature, high frequency, optoelectronic, and military/space applications. The GaN/AlGaN HEMT-based X-ray sensors offer superior performance, as evidenced by higher sensitivity due to intensification of electrons in the two-dimensional electron gas (2DEG), by ionizing radiation. This increase in detector sensitivity, by a factor of 104 compared to GaN thin film, now offers the opportunity to reduce health risks associated with the steady increase in CT scans in today's medicine, and the associated increase in exposure to harmful ionizing radiation, by introducing GaN/AlGaN sensors into X-ray imaging devices, for the benefit of the patient.
RESUMEN
Membrane-associated enzymes have been found to behave differently qualitatively and quantitatively in terms of activity. These findings were highly debated in the 1970s and many general correlations and reaction specific models have been proposed, reviewed, and discarded. However, new biological applications brought up the need for clarification and elucidation. To address literature shortcomings, we chose the intrinsically water-soluble enzyme a disintegrin and metalloproteinase with a thrombospondin type 1 motif, member 13 (ADAMTS13) and large unilamellar vesicles with a relative broad phase transition. We here present activity measurements of ADAMTS13 in the freely dissolved state and the membrane associated state for phosphocholine lipids with different acyl-chain lengths (13:0, 14:0 and 15:0) and thus main phase transition temperatures. While the freely dissolved enzyme shows a simple Arrhenius behavior, the activity of membrane associated ADAMTS13 in addition shows a peak. This peak temperature correlates with the main phase transition temperature of the used lipids. These findings support an alternative theory of catalysis. This theory predicts a correlation of the membrane associated activity and the heat capacity, as both are susceptibilities of the same surface Gibb's free energy, since the enzyme is attached to the membrane.
Asunto(s)
Proteína ADAMTS13/química , Membrana Dobles de Lípidos/química , Fosfolípidos/química , Proteína ADAMTS13/metabolismo , Humanos , Membrana Dobles de Lípidos/metabolismo , Transición de Fase , Fosfolípidos/metabolismo , Solubilidad , Temperatura , Agua/químicaRESUMEN
We report on in vitro wound-healing and cell-growth studies under the influence of radio-frequency (rf) cell stimuli. These stimuli are supplied either by piezoactive surface acoustic waves (SAWs) or by microelectrode-generated electric fields, both at frequencies around 100 MHz. Employing live-cell imaging, we studied the time- and power-dependent healing of artificial wounds on a piezoelectric chip for different cell lines. If the cell stimulation is mediated by piezomechanical SAWs, we observe a pronounced, significant maximum of the cell-growth rate at a specific SAW amplitude, resulting in an increase of the wound-healing speed of up to 135 ± 85% as compared to an internal reference. In contrast, cells being stimulated only by electrical fields of the same magnitude as the ones exposed to SAWs exhibit no significant effect. In this study, we investigate this effect for different wavelengths, amplitude modulation of the applied electrical rf signal, and different wave modes. Furthermore, to obtain insight into the biological response to the stimulus, we also determined both the cell-proliferation rate and the cellular stress levels. While the proliferation rate is significantly increased for a wide power range, cell stress remains low and within the normal range. Our findings demonstrate that SAW-based vibrational cell stimulation bears the potential for an alternative method to conventional ultrasound treatment, overcoming some of its limitations.
Asunto(s)
Estimulación Acústica/métodos , Sonido/efectos adversos , Vibración/uso terapéutico , Cicatrización de Heridas/efectos de la radiación , Estimulación Acústica/efectos adversos , Estimulación Acústica/instrumentación , Animales , Línea Celular , Línea Celular Tumoral , Movimiento Celular/efectos de la radiación , Proliferación Celular/efectos de la radiación , Terapia Combinada/efectos adversos , Terapia Combinada/instrumentación , Terapia Combinada/métodos , Perros , Electrodos , Humanos , Células de Riñón Canino Madin Darby , Estrés Oxidativo/efectos de los fármacos , Especies Reactivas de OxígenoRESUMEN
A Love-wave based biosensor is introduced for analyzing a standardized wound healing assay by observing cell growth and quantifying cell detachment processes. Utilizing the piezoelectric material LiTaO3 36° XY-cut with a thin SiO2-cover layer, shear horizontal surface acoustic waves (SAW) are excited and detected by a set of Interdigital Transducers. Epithelial cells, being cultivated on the substrate and invading the sensors delay line cause a phase shift in the transmitted SAW signal. This phase shift correlates exactly with the surface coverage of the invading cells. After wound healing, emerging fluctuations in the phase shift signal provide information about the cell growth in a confluent cell layer. Additionally, the signal slope allows to quantify the cell detachment process induced by apoptosis, necrosis or cell lysis substances, respectively. Furthermore, culture conditions like temperature or osmolality can be simultaneously monitored by SAW. Based on a theoretical approach and using FEM simulations, we identified the acoustoelectric interaction as the main reason for the phase shift in various frequency- and time-dependent studies. Our model is validated by experimental data and allows predicting the phase change caused by variations in the cell-substrate distance or the volume ratio of the nucleus and the complete cell.
RESUMEN
For Plasmodium falciparum related malaria (B50), one of the outstanding host factors for the development of severe disease is the ABO blood group of malaria patients, where blood group O reduces the probability of severe disease as compared to individuals of groups A, B, or AB. In this report, we investigate the stability of rosette aggregates in malaria caused by Plasmodium falciparum in microflows. These flows are created in microfluidic channels with stenosis-like constrictions of different widths down to ones narrower as the rosette's diameter. High speed videos were recorded and analyzed by a MATLAB© based tracking software (SURF: SUrvival of Rosettes in Flow). We find a correlation of rosette size, channel diameter, and blood group regarding the mobility of the rosettes. Following the concept of a thermodynamic model, we find a critical width of the stenosis for rosette rupture during their passage. Our data reveal that under physiologically relevant conditions, rosettes in blood group A have a higher rosette frequency and stability as compared to blood group O (BG O), which constitutes a crucial factor promoting the observed protection in BG O individuals against severe malaria in non-O individuals.
RESUMEN
Unilamellar lipid vesicles can serve as model for protocells. We present a vesicle fission mechanism in a thermal gradient under flow in a convection chamber, where vesicles cycle cold and hot regions periodically. Crucial to obtain fission of the vesicles in this scenario is a temperature-induced membrane phase transition that vesicles experience multiple times. We model the temperature gradient of the chamber with a capillary to study single vesicles on their way through the temperature gradient in an external field of shear forces. Starting in the gel-like phase the spherical vesicles are heated above their main melting temperature resulting in a dumbbell-deformation. Further downstream a temperature drop below the transition temperature induces splitting of the vesicles without further physical or chemical intervention. This mechanism also holds for less cooperative systems, as shown here for a lipid alloy with a broad transition temperature width of 8 K. We find a critical tether length that can be understood from the transition width and the locally applied temperature gradient. This combination of a temperature-induced membrane phase transition and realistic flow scenarios as given e.g. in a white smoker enable a fission mechanism that can contribute to the understanding of more advanced protocell cycles.
RESUMEN
One of the main challenges in endoprosthesis surgeries are implant-associated infections and aseptic-loosenings, caused by wear debris. To combat these problems, the requirements to surfaces of endoprostheses are wear-resistance, low cytotoxicity and antimicrobial efficacy. We here present antimicrobial coatings with a smart, adaptive release of metal ions in case of infection, based on ZnO-nanoparticles embedded in diamond-like carbon (DLC). The Zn2+ ion release of these coatings in aqueous environments reacts and adapts smartly on inflammations accompanied by acidosis. Moreover, we show that this increased ion release comes along with an increased toxicity to fibroblastic cells (L929) and bacteria (Staphylococcus aureus subsp. aureus, resistant to methicillin and oxacillin. (ATCC 43300, MRSA) and Staphylococcus epidermidis (ATCC 35984, S. epidermidis). Interestingly, the antimicrobial effect and the cytotoxicity of the coatings increase with a reduction of the pH value from 7.4 to 6.4, but not further to pH 5.4.
Asunto(s)
Antibacterianos/farmacología , Bacterias/efectos de los fármacos , Carbono/química , Materiales Biocompatibles Revestidos/química , Óxido de Zinc/farmacología , Animales , Antibacterianos/química , Adhesión Bacteriana/efectos de los fármacos , Línea Celular , Fibroblastos/efectos de los fármacos , Fibroblastos/microbiología , Concentración de Iones de Hidrógeno , Meticilina/farmacología , Ratones , Nanopartículas/química , Oxacilina/farmacología , Prótesis e Implantes , Propiedades de Superficie/efectos de los fármacos , Óxido de Zinc/químicaRESUMEN
The separation of deuterium from hydrogen still remains a challenging and industrially relevant task. Compared to traditional cryogenic methods for separation, based on different boiling points of H2 and D2 , the use of ultramicroporous materials offers a more efficient alternative method. Due to their rigid structures, permanently high porosity, tunable pore sizes and adjustable internal surface properties, metal-organic frameworks (MOFs), a class of porous materials built through the coordination between organic linkers and metal ions/clusters, are more suitable for this approach than zeolites or carbon-based materials. Herein, dynamic gas flow studies on H2 /D2 quantum sieving in MFU-4, a metal-organic framework with ultra-narrow pores of 2.5â Å, are presented. A specially designed sensor with a very fast response based on surface acoustic waves is used. On-chip measurements of diffusion rates in the temperature range 27-207â K reveal a quantum sieving effect, with D2 diffusing faster than H2 below 64â K and the opposite selectivity above this temperature. The experimental results obtained are confirmed by molecular dynamic simulation regarding quantum sieving of H2 and D2 on MOFs for which a flexible framework approach was used for the first time.
RESUMEN
We report a comprehensive study of the impact of the structural properties in radial GaAs-Al0.3Ga0.7As nanowire-quantum well heterostructures on the optical recombination dynamics and electrical transport properties, emphasizing particularly the role of the commonly observed variations of the quantum well thickness at different facets. Typical thickness fluctuations of the radial quantum well observed by transmission electron microscopy lead to pronounced localization. Our optical data exhibit clear spectral shifts and a multipeak structure of the emission for such asymmetric ring structures resulting from spatially separated, yet interconnected quantum well systems. Charge carrier dynamics induced by a surface acoustic wave are resolved and prove efficient carrier exchange on native, subnanosecond time scales within the heterostructure. Experimental findings are corroborated by theoretical modeling, which unambiguously show that electrons and holes localize on facets where the quantum well is the thickest and that even minute deviations of the perfect hexagonal shape strongly perturb the commonly assumed 6-fold symmetric ground state.
RESUMEN
For the investigation of cell-cell interaction in general and for neural communication and future applications of neural networks, a controllable and well-defined network structure is crucial. We here propose the implementation of an acoustically driven system for tunable and deliberate stimulation and manipulation of cell growth on a chip. This piezoelectric chip allows us to generate a checkerboard-like standing surface acoustic wave pattern coupled to a fluid layer in a microfluidic chamber on top. Such a dynamically induced patterning lattice is shown to allow for the active positioning of the neurons and subsequent guided neurite outgrowth, thus finally overcoming the limitations of static approaches. After thorough characterization of the resulting tunable potential landscape, we successfully demonstrate cell adhesion and even growth of the such positioned cells within the well-defined pressure nodes. We demonstrate neuron growth at predetermined positions and observe a subsequent neurite outgrowth, even being correlated with the artificial potential landscape. For the very delicate and sensitive primary neural cells, this is a change of paradigm! Our experimental findings give us confidence that our hybrid lab-on-a-chip system in the near future will allow researchers to study cell-cell interaction of primary neurons. If scaled to a true network level, it will enable us to control and study how neural networks connect, interact, and communicate.
Asunto(s)
Dispositivos Laboratorio en un Chip , Red Nerviosa/efectos de la radiación , Neuronas/efectos de la radiación , Sonido , Animales , Técnicas Analíticas Microfluídicas , Red Nerviosa/citología , Red Nerviosa/crecimiento & desarrolloRESUMEN
Cells experience forces if subjected to laminar flow. These forces, mostly of shear force character, are strongly dependent not only on the applied flow field itself but also on hydrodynamic effects originating from neighboring cells. This particularly becomes important for the interpretation of data from in vitro experiments in flow chambers without confluent cell layers. By employing numerical Finite Element Method simulations of such assemblies of deformable objects under shear flow, we investigate the occurring stress within elastic adherent cells and the influence of neighboring cells on these quantities. For this, we simulate single and multiple adherent cells of different shapes fixed on a solid substrate under laminar flow parallel to the substrate for different velocities. We determine the local stress within the cells close to the cell-substrate-interface and the overall stress of the cells by surface integration over the cell surface. Comparing each measurand in the case of a multiple cell situation with the corresponding one of single cells under identical conditions, we introduce a dimensionless influence factor. The systematic variation of the distance and angle between cells, where the latter is with respect to the flow direction, flow velocity, Young's modulus, cell shape, and cell number, enables us to describe the actual influence on a cell. Overall, we here demonstrate that the cell density is a crucial parameter for all studies on flow induced experiments on adherent cells in vitro.
RESUMEN
Observation of the kinetics and measurement of the activation energies for gas diffusion in porous materials requires very fast and sensitive sensors. In this work, thin films of metal-organic frameworks (MOFs) with different pore sizes are grown on a surface acoustic wave (SAW) substrate, resulting in very sensitive and specific sensor systems for the detection of various gases at very short time scales. Using specially designed SAW delay lines for the detection, up to 200-nm-wide cubic MOF crystals were grown directly from a solution on the sensitive sensor chip area. One example, MFU-4, exhibits a smallest pore aperture of 2.5 Å and shows a highly sensitive and specific response to CO2, H2, He, NH3, and H2O. It is shown that such a MOF@SAW sensor responds within milliseconds to gas loading and its sensitivity reaches levels as low as 1 ppmv, currently only limited by the gas mixing system. This unique combination of sensitivity and fast response characteristics allows even for real-time investigations of the sorption kinetics during gas uptake and release. As is typical for SAW sensors, the production of the chips is very straightforward and inexpensive and-combined with the unique properties of the MOFs with their tunable pore sizes and adjustable internal surface properties-holds promise for different sensor applications.
RESUMEN
Cell adhesion processes are of ubiquitous importance for biomedical applications such as optimization of implant materials. Here, not only physiological conditions such as temperature or pH, but also topographical structures play crucial roles, as inflammatory reactions after surgery can diminish osseointegration. In this study, we systematically investigate cell adhesion under static, dynamic and physiologically relevant conditions employing a lab-on-a-chip system. We screen adhesion of the bone osteosarcoma cell line SaOs-2 on a titanium implant material for pH and temperature values in the physiological range and beyond, to explore the limits of cell adhesion, e.g., for feverish and acidic conditions. A detailed study of different surface roughness Rq gives insight into the correlation between the cells' abilities to adhere and withstand shear flow and the topography of the substrates, finding a local optimum at Rq = 22 nm. We use shear stress induced by acoustic streaming to determine a measure for the ability of cell adhesion under an external force for various conditions. We find an optimum of cell adhesion for T = 37 °C and pH = 7.4 with decreasing cell adhesion outside the physiological range, especially for high T and low pH. We find constant detachment rates in the physiological regime, but this behavior tends to collapse at the limits of 41 °C and pH 4.
RESUMEN
A low cost version to enable high temperature MAS NMR experiments at temperatures of up to 700°C and spinning speeds of up to 10kHz is presented. The method relies on inductive heating using a metal coated rotor insert. The metal coating is accomplished via a two step process involving physical vapor deposition and galvanization.
RESUMEN
In this work we investigate the interaction between endothelial cells and nanoparticles emitted by catalytic converters. Although catalyst-derived particles are recognized as growing burden added to environmental pollution, very little is known about their health impact. We use platinum-decorated ceria nanoparticles as model compounds for the actual emitted particles and focus on their fast uptake and association with mitochondria, the cell's powerhouse. Using live-cell imaging and electron microscopy we clearly show that 46 nm platinum-decorated ceria nanoparticles can rapidly penetrate cell membranes and reach the cytosol. Moreover, if suitably targeted, these particles are able to selectively attach to mitochondria. These results are complemented by cytotoxicity assays, thus providing insights into the biological effects of these particles on cells. Interestingly, no permanent membrane disruption or any other significant adverse effects on cells were observed. The unusual uptake behavior observed for 46 nm nanoparticles was not observed for equivalent but larger 143 nm and 285 nm platinum-decorated particles. Our results demonstrate a remarkable particle size effect in which particles smaller than â¼50-100 nm escape the usual endocytic pathway and translocate directly into the cytosol, while particles larger than â¼150 nm are internalized by conventional endocytosis. Since the small particles are able to bypass endocytosis they could be explored as drug and gene delivery vehicles. Platinum-decorated nanoparticles are therefore highly interesting in the fields of nanotoxicology and nanomedicine.
RESUMEN
BACKGROUND: Rosetting is associated with severe malaria and a primary cause of death in Plasmodium falciparum infections. Detailed understanding of this adhesive phenomenon may enable the development of new therapies interfering with rosette formation. For this, it is crucial to determine parameters such as rosetting and parasitaemia of laboratory strains or patient isolates, a bottleneck in malaria research due to the time consuming and error prone manual analysis of specimens. Here, the automated, free, stand-alone analysis software automated rosetting analyzer for micrographs (ARAM) to determine rosetting rate, rosette size distribution as well as parasitaemia with a convenient graphical user interface is presented. METHODS: Automated rosetting analyzer for micrographs is an executable with two operation modes for automated identification of objects on images. The default mode detects red blood cells and fluorescently labelled parasitized red blood cells by combining an intensity-gradient with a threshold filter. The second mode determines object location and size distribution from a single contrast method. The obtained results are compared with standardized manual analysis. Automated rosetting analyzer for micrographs calculates statistical confidence probabilities for rosetting rate and parasitaemia. RESULTS: Automated rosetting analyzer for micrographs analyses 25 cell objects per second reliably delivering identical results compared to manual analysis. For the first time rosette size distribution is determined in a precise and quantitative manner employing ARAM in combination with established inhibition tests. Additionally ARAM measures the essential observables parasitaemia, rosetting rate and size as well as location of all detected objects and provides confidence intervals for the determined observables. No other existing software solution offers this range of function. The second, non-malaria specific, analysis mode of ARAM offers the functionality to detect arbitrary objects. CONCLUSIONS: Automated rosetting analyzer for micrographs has the capability to push malaria research to a more quantitative and statistically significant level with increased reliability due to operator independence. As an installation file for Windows © 7, 8.1 and 10 is available for free, ARAM offers a novel open and easy-to-use platform for the malaria community to elucidate resetting.
Asunto(s)
Interpretación de Imagen Asistida por Computador , Malaria Falciparum/diagnóstico por imagen , Parasitemia/diagnóstico por imagen , Plasmodium falciparum/aislamiento & purificación , Programas Informáticos , Eritrocitos/fisiología , Malaria Falciparum/sangre , Malaria Falciparum/fisiopatología , Microscopía/instrumentación , Parasitemia/parasitología , Reproducibilidad de los Resultados , Formación de Roseta/instrumentaciónRESUMEN
The implant-bone interface is the scene of competition between microorganisms and distinct types of tissue cells. In the past, various strategies have been followed to support bony integration and to prevent bacterial implant-associated infections. In the present study we investigated the biological properties of diamond-like carbon (DLC) surfaces containing silver nanoparticles. DLC is a promising material for the modification of medical implants providing high mechanical and chemical stability and a high degree of biocompatibility. DLC surface modifications with varying silver concentrations were generated on medical-grade titanium discs, using plasma immersion ion implantation-induced densification of silver nanoparticle-containing polyvinylpyrrolidone polymer solutions. Immersion of implants in aqueous liquids resulted in a rapid silver release reducing the growth of surface-bound and planktonic Staphylococcus aureus and Staphylococcus epidermidis. Due to the fast and transient release of silver ions from the modified implants, the surfaces became biocompatible, ensuring growth of mammalian cells. Human endothelial cells retained their cellular differentiation as indicated by the intracellular formation of Weibel-Palade bodies and a high responsiveness towards histamine. Our findings indicate that the integration of silver nanoparticles into DLC prevents bacterial colonization due to a fast initial release of silver ions, facilitating the growth of silver susceptible mammalian cells subsequently.