MyD88-dependent Toll-like receptor 2 signaling modulates macrophage activation on lysate-adsorbed Teflon™ AF surfaces in an in vitro biomaterial host response model.

The adsorbed protein layer on an implanted biomaterial surface is known to mediate downstream cell-material interactions that drive the host response. While the adsorption of plasma-derived proteins has been studied extensively, the adsorption of damage-associated molecular patterns (DAMPs) derived from damaged cells and matrix surrounding the implant remains poorly understood. Previously, our group developed a DAMP-adsorption model in which 3T3 fibroblast lysates were used as a complex source of cell-derived DAMPs and we demonstrated that biomaterials with adsorbed lysate potently activated RAW-Blue macrophages via Toll-like receptor 2 (TLR2). In the present study, we characterized the response of mouse bone marrow derived macrophages (BMDM) from wildtype (WT), TLR2-/- and MyD88-/- mice on Teflon™ AF surfaces pre-adsorbed with 10% plasma or lysate-spiked plasma (10% w/w total protein from 3T3 fibroblast lysate) for 24 hours. WT BMDM cultured on adsorbates derived from 10% lysate in plasma had significantly higher gene and protein expression of IL-1ß, IL-6, TNF-α, IL-10, RANTES/CCL5 and CXCL1/KC, compared to 10% plasma-adsorbed surfaces. Furthermore, the upregulation of pro-inflammatory cytokine and chemokine expression in the 10% lysate in plasma condition was attenuated in TLR2-/- and MyD88-/- BMDM. Proteomic analysis of the adsorbed protein layers showed that even this relatively small addition of lysate-derived proteins within plasma (10% w/w) caused a significant change to the adsorbed protein profile. The 10% plasma condition had fibrinogen, albumin, apolipoproteins, complement, and fibronectin among the top 25 most abundant proteins. While proteins layers generated from 10% lysate in plasma retained fibrinogen and fibronectin among the top 25 proteins, there was a disproportionate increase in intracellular proteins, including histones, tubulins, actins, and vimentin. Furthermore, we identified 7 DAMPs or DAMP-related proteins enriched in the 10% plasma condition (fibrinogen, apolipoproteins), compared to 39 DAMPs enriched in the 10% lysate in plasma condition, including high mobility group box 1 and histones. Together, these findings indicate that DAMPs and other intracellular proteins readily adsorb to biomaterial surfaces in competition with plasma proteins, and that adsorbed DAMPs induce an inflammatory response in adherent macrophages that is mediated by the MyD88-dependent TLR2 signaling pathway.

A Macrophage Reporter Cell Assay to Examine Toll-Like Receptor-Mediated NF-kB/AP-1 Signaling on Adsorbed Protein Layers on Polymeric Surfaces.

The persistent inflammatory host response to an implanted biomaterial, known as the foreign body reaction, is a significant challenge in the development and implementation of biomedical devices and tissue engineering constructs. Macrophages, an innate immune cell, are key players in the foreign body reaction because they remain at the implant site for the lifetime of the device, and are commonly studied to gain an understanding of this detrimental host response. Many biomaterials researchers have shown that adsorbed protein layers on implanted materials influence macrophage behavior, and subsequently impact the host response. The methods in this paper describe an in vitro model using adsorbed protein layers containing cellular damage molecules on polymer biomaterial surfaces to assess macrophage responses. An NF-кB/AP-1 reporter macrophage cell line and the associated colorimetric alkaline phosphatase assay were used as a rapid method to indirectly examine NF-кB/AP-1 transcription factor activity in response to complex adsorbed protein layers containing blood proteins and damage-associated molecular patterns, as a model of the complex adsorbed protein layers formed on biomaterial surfaces in vivo.

Integrated genome-wide analysis of expression quantitative trait loci aids interpretation of genomic association studies.

BACKGROUND: Identification of single nucleotide polymorphisms (SNPs) associated with gene expression levels, known as expression quantitative trait loci (eQTLs), may improve understanding of the functional role of phenotype-associated SNPs in genome-wide association studies (GWAS). The small sample sizes of some previous eQTL studies have limited their statistical power. We conducted an eQTL investigation of microarray-based gene and exon expression levels in whole blood in a cohort of 5257 individuals, exceeding the single cohort size of previous studies by more than a factor of 2. RESULTS: We detected over 19,000 independent lead cis-eQTLs and over 6000 independent lead trans-eQTLs, targeting over 10,000 gene targets (eGenes), with a false discovery rate (FDR) < 5%. Of previously published significant GWAS SNPs, 48% are identified to be significant eQTLs in our study. Some trans-eQTLs point toward novel mechanistic explanations for the association of the SNP with the GWAS-related phenotype. We also identify 59 distinct blocks or clusters of trans-eQTLs, each targeting the expression of sets of six to 229 distinct trans-eGenes. Ten of these sets of target genes are significantly enriched for microRNA targets (FDR < 5%). Many of these clusters are associated in GWAS with multiple phenotypes. CONCLUSIONS: These findings provide insights into the molecular regulatory patterns involved in human physiology and pathophysiology. We illustrate the value of our eQTL database in the context of a recent GWAS meta-analysis of coronary artery disease and provide a list of targeted eGenes for 21 of 58 GWAS loci.

An injectable elastin-based gene delivery platform for dose-dependent modulation of angiogenesis and inflammation for critical limb ischemia.

Critical limb ischemia is a major clinical problem. Despite rigorous treatment regimes, there has been only modest success in reducing the rate of amputations in affected patients. Reduced level of blood flow and enhanced inflammation are the two major pathophysiological changes that occur in the ischemic tissue. The objective of this study was to develop a controlled dual gene delivery system capable of delivering therapeutic plasmid eNOS and IL-10 in a temporal manner. In order to deliver multiple therapeutic genes, an elastin-like polypeptide (ELP) based injectable system was designed. The injectable system was comprised of hollow spheres and an in situ-forming gel scaffold of elastin-like polypeptide capable of carrying gene complexes, with an extended manner release profile. In addition, the ELP based injectable system was used to deliver human eNOS and IL-10 therapeutic genes in vivo. A subcutaneous dose response study showed enhanced blood vessel density in the treatment groups of eNOS (20 µg) and IL-10 (10 µg)/eNOS (20 µg) and reduced inflammation with IL-10 (10 µg) alone. Next, we carried out a hind-limb ischemia model comparing the efficacy of the following interventions; Saline; IL-10, eNOS and IL-10/eNOS. The selected dose of eNOS, exhibited enhanced angiogenesis. IL-10 treatment groups showed reduction in the level of inflammatory cells. Furthermore, we demonstrated that eNOS up-regulated major proangiogenic growth factors such as vascular endothelial growth factors, platelet derived growth factor B, and fibroblast growth factor 1, which may explain the mechanism of this approach. These factors help in formation of a stable vascular network. Thus, ELP injectable system mediating non-viral delivery of human IL10-eNOS is a promising therapy towards treating limb ischemia.

Electrospun fiber constructs for vocal fold tissue engineering: effects of alignment and elastomeric polypeptide coating.

Vocal fold lamina propria extracellular matrix (ECM) is highly aligned and when injured, becomes disorganized with loss of the tissue's critical biomechanical properties. This study examines the effects of electrospun fiber scaffold architecture and elastin-like polypeptide (ELP4) coating on human vocal fold fibroblast (HVFF) behavior for applications toward tissue engineering the vocal fold lamina propria. Electrospun Tecoflex™ scaffolds were made with aligned and unaligned fibers, and were characterized using scanning electron microscopy and uniaxial tensile testing. ELP4 was successfully adsorbed onto the scaffolds; HVFFs were seeded and their viability, proliferation, morphology and gene expression were characterized. Aligned and unaligned scaffolds had initial elastic moduli of ∼14 MPa, ∼5 MPa and ∼0.3 MPa, ∼0.6 MPa in the preferred and cross-preferred directions, respectively. Scaffold topography had an effect on the orientation of the cells, with HVFFs seeded on aligned scaffolds having a significantly different (p<0.001) angle of orientation than HVFFs cultured on unaligned scaffolds. This same effect and significant difference (p<0.001) was seen on aligned and unaligned scaffolds coated with ELP4. Scaffold alignment and ELP4 coating impacted ECM gene expression. ELP4 coating, and aligned scaffolds upregulated elastin synthesis when tested on day 7 without a concomitant upregulation of collagen III synthesis. Collectively, results indicate that aligned electrospun scaffolds and ELP4 coating are promising candidates in the development of biodegradeable vocal fold lamina propria constructs.

Evaluation of the bulk platelet response and fibrinogen interaction to elastin-like polypeptide coatings.

In this work, we expand on our understanding of the thrombogenicity of coatings prepared with three different recombinant elastin-like polypeptides (ELPs). The bulk platelet response of the ELP coatings was characterized following whole blood contact under physiological shear flow (300 s(-1) ) using flow cytometry. Prolonged exposure to shear flow (1-h) indicated that materials coated with the longer ELP coatings (ELP2 and ELP4) had less bulk platelet activation and microparticle formation than materials coated with the shorter ELP1. Quartz crystal microbalance with dissipation (QCM-D) was used to monitor the binding of the platelet membrane receptor GPIIb/IIIa to ELP-adsorbed fibrinogen (Fg) surfaces. Compared to the shorter ELPs, a lower amount of Fg adsorbed to the ELP4 coated material and ELP4 appeared to form a softer, more structurally flexible coating layer. When Fg was adsorbed to the ELP coated surface it demonstrated an altered binding for GPIIb/IIIa that was inhibited in the presence of an AGDV-containing peptide but not an RGD-containing peptide. Conversely, on the shorter ELP coatings, binding of GPIIb/IIIa to an adsorbed Fg layer was partially inhibited in the presence of an RGD-containing peptide. These results indicate that both the quantity and conformational state of Fg varies when adsorbed to surfaces coated with ELPs of varying sequence length, which may be mediating their platelet response. Collectively, the findings reinforce the applicability of the ELPs as potential thromboresistant coatings, especially with the use of the longer polypeptide-ELP4.

Expression of regulatory platelet microRNAs in patients with sickle cell disease.

BACKGROUND: Increased platelet activation in sickle cell disease (SCD) contributes to a state of hypercoagulability and confers a risk of thromboembolic complications. The role for post-transcriptional regulation of the platelet transcriptome by microRNAs (miRNAs) in SCD has not been previously explored. This is the first study to determine whether platelets from SCD exhibit an altered miRNA expression profile. METHODS AND FINDINGS: We analyzed the expression of miRNAs isolated from platelets from a primary cohort (SCD = 19, controls = 10) and a validation cohort (SCD = 7, controls = 7) by hybridizing to the Agilent miRNA microarrays. A dramatic difference in miRNA expression profiles between patients and controls was noted in both cohorts separately. A total of 40 differentially expressed platelet miRNAs were identified as common in both cohorts (p-value 0.05, fold change>2) with 24 miRNAs downregulated. Interestingly, 14 of the 24 downregulated miRNAs were members of three families - miR-329, miR-376 and miR-154 - which localized to the epigenetically regulated, maternally imprinted chromosome 14q32 region. We validated the downregulated miRNAs, miR-376a and miR-409-3p, and an upregulated miR-1225-3p using qRT-PCR. Over-expression of the miR-1225-3p in the Meg01 cells was followed by mRNA expression profiling to identify mRNA targets. This resulted in significant transcriptional repression of 1605 transcripts. A combinatorial approach using Meg01 mRNA expression profiles following miR-1225-3p overexpression, a computational prediction analysis of miRNA target sequences and a previously published set of differentially expressed platelet transcripts from SCD patients, identified three novel platelet mRNA targets: PBXIP1, PLAGL2 and PHF20L1. CONCLUSIONS: We have identified significant differences in functionally active platelet miRNAs in patients with SCD as compared to controls. These data provide an important inventory of differentially expressed miRNAs in SCD patients and an experimental framework for future studies of miRNAs as regulators of biological pathways in platelets.

Gene expression signatures of coronary heart disease.

OBJECTIVE: To identify transcriptomic biomarkers of coronary heart disease (CHD) in 188 cases with CHD and 188 age- and sex-matched controls who were participants in the Framingham Heart Study. APPROACH AND RESULTS: A total of 35 genes were differentially expressed in cases with CHD versus controls at false discovery rate<0.5, including GZMB, TMEM56, and GUK1. Cluster analysis revealed 3 gene clusters associated with CHD, 2 linked to increased erythrocyte production and a third to reduced natural killer and T cell activity in cases with CHD. Exon-level results corroborated and extended the gene-level results. Alternative splicing analysis suggested that GUK1 and 38 other genes were differentially spliced in cases with CHD versus controls. Gene Ontology analysis linked ubiquitination and T-cell-related pathways with CHD. CONCLUSIONS: Two bioinformatically defined groups of genes show consistent associations with CHD. Our findings are consistent with the hypotheses that hematopoesis is upregulated in CHD, possibly reflecting a compensatory mechanism, and that innate immune activity is disrupted in CHD or altered by its treatment. Transcriptomic signatures may be useful in identifying pathways associated with CHD and point toward novel therapeutic targets for its treatment and prevention.

Surface and adsorption characteristics of three elastin-like polypeptide coatings with varying sequence lengths.

The surface properties of a family of elastin-like polypeptides (ELPs), differing in molecular weight and sequence length, were investigated to understand how the nature of the polypeptide film might contribute to their thrombogenic profile. Physical adsorption of the ELPs onto Mylar increased surface wettability as the sequence length decreased while X-ray spectroscopy analysis showed an increasing amide content with sequence length. Chemical force microscopy analysis revealed that the ELP-coated surfaces displayed purely hydrophilic adhesion forces that increased as the ELP sequence length decreased. Adsorption isotherms performed using the quartz crystal microbalance with dissipation, showed that the surface coverage increased with ELP sequence length. The longer polypeptides (ELP2 and ELP4) also displayed higher specific dissipation values indicating that they established films with greater structural flexibility and associated water content than the shorter polypeptide, ELP1. Additionally, the stability of the ELP coating was lower with the shorter polypeptides. This study highlights the different surface properties of the ELP coatings as well as the dynamic nature of the ELP adsorbed layer wherein the conformational state may be an important factor contributing to their blood response.

A systematic comparison and evaluation of high density exon arrays and RNA-seq technology used to unravel the peripheral blood transcriptome of sickle cell disease.

BACKGROUND: Transcriptomic studies in clinical research are essential tools for deciphering the functional elements of the genome and unraveling underlying disease mechanisms. Various technologies have been developed to deduce and quantify the transcriptome including hybridization and sequencing-based approaches. Recently, high density exon microarrays have been successfully employed for detecting differentially expressed genes and alternative splicing events for biomarker discovery and disease diagnostics. The field of transcriptomics is currently being revolutionized by high throughput DNA sequencing methodologies to map, characterize, and quantify the transcriptome. METHODS: In an effort to understand the merits and limitations of each of these tools, we undertook a study of the transcriptome in sickle cell disease, a monogenic disease comparing the Affymetrix Human Exon 1.0 ST microarray (Exon array) and Illumina's deep sequencing technology (RNA-seq) on whole blood clinical specimens. RESULTS: Analysis indicated a strong concordance (R = 0.64) between Exon array and RNA-seq data at both gene level and exon level transcript expression. The magnitude of differential expression was found to be generally higher in RNA-seq than in the Exon microarrays. We also demonstrate for the first time the ability of RNA-seq technology to discover novel transcript variants and differential expression in previously unannotated genomic regions in sickle cell disease. In addition to detecting expression level changes, RNA-seq technology was also able to identify sequence variation in the expressed transcripts. CONCLUSIONS: Our findings suggest that microarrays remain useful and accurate for transcriptomic analysis of clinical samples with low input requirements, while RNA-seq technology complements and extends microarray measurements for novel discoveries.

Evaluation of thiol-modified hyaluronan and elastin-like polypeptide composite augmentation in early-stage disc degeneration: comparing 2 minimally invasive techniques.

STUDY DESIGN: An in vitro biomechanical and imaging study generated from an in vivo porcine model of early stage degenerative disc disease was used to evaluate mechanical property restoration, comparing 2 minimally invasive injection techniques. OBJECTIVE: To evaluate the ability of an injectable hydrogel to restore the mechanical properties of spinal motion segments with early stage disc degeneration, comparing 2 minimally invasive injection techniques. SUMMARY OF BACKGROUND DATA: Treatment of early-stage disc degeneration may benefit from a combination of tissue engineering and minimally invasive therapeutic approaches. A recently developed hydrogel, thiol-modified hyaluronan elastin-like polypeptide (TMHA/EP) composite, has demonstrated potential as an injectable nucleus replacement. METHODS: From a total of thirteen 35-kg Yorkshire boars, early-stage lumbar disc degeneration was introduced into 10 pigs via injection of chondroitinase ABC. After degeneration, 8 pigs received TMHA/EP augmentation; 1 disc via direct needle injection and a second using a modified kyphoplasty approach. High-resolution magnetic resonance images were acquired of the excised spinal motion segments, followed by biomechanical testing in axial compression, flexion-extension, lateral bending, and torsion. RESULTS: The degenerate control motion segments were generally less stiff and more flexible than healthy controls. The injection of TMHA/EP into the degenerated nucleus produced similar mechanical stiffness to healthy controls. The direct-injected discs showed a dispersive pattern of TMHA/EP within the nucleus, whereas the modified kyphoplasty method yielded a bolus of hydrogel. Yet, mechanical behavior was comparable considering the 2 minimally invasive augmentation techniques. CONCLUSION: The TMHA/EP composite can restore initial mechanical behavior in early-stage disc degeneration. Although both augmentation methods yielded mechanical properties comparable with healthy controls, direct injection represents a simpler technique, uses a smaller-gauge needle, does not introduce air into the disc, and yields a dispersive pattern that may be beneficial for future delivery of cells or growth factors.

Electrospun elastin-like polypeptide enriched polyurethanes and their interactions with vascular smooth muscle cells.

In vascular tissue, elastin is an essential extracellular matrix protein that plays an important biomechanical and biological signalling role. Native elastin is insoluble and is difficult to extract from tissues, which results in its relatively rare use for the fabrication of vascular tissue engineering scaffolds. Recombinant elastin-like polypeptide-4 (ELP4), which mimics the structure and function of native tropoelastin, represents a practical alternative to the native elastic fibre for vascular applications. In this study, electrospinning was utilized to fabricate fibrous scaffolds which were subsequently surface modified with ELP4 and used as substrates for smooth muscle cell culture. ELP4 surface modified materials demonstrated enhanced smooth muscle cell (SMC) adhesion and maintenance of cell numbers over a 1-week period relative to controls. SMCs seeded on the ELP4 surface modified materials were also shown to exhibit the cell morphology and biological markers of a contractile phenotype including a spindle-like morphology, actin filament organization and smooth muscle myosin heavy chain expression. Competitive inhibition experiments demonstrated that the elastin-laminin cell surface receptor and its affinity for the VGVAPG peptide sequence on ELP4 molecules are likely involved in the initial SMC contact with the ELP4 modified materials. Elastin-like polypeptides show promise as surface modifiers for candidate scaffolds for engineering contractile vascular tissues.

Gene expression analysis of whole blood, peripheral blood mononuclear cells, and lymphoblastoid cell lines from the Framingham Heart Study.

Despite a growing number of reports of gene expression analysis from blood-derived RNA sources, there have been few systematic comparisons of various RNA sources in transcriptomic analysis or for biomarker discovery in the context of cardiovascular disease (CVD). As a pilot study of the Systems Approach to Biomarker Research (SABRe) in CVD Initiative, this investigation used Affymetrix Exon arrays to characterize gene expression of three blood-derived RNA sources: lymphoblastoid cell lines (LCL), whole blood using PAXgene tubes (PAX), and peripheral blood mononuclear cells (PBMC). Their performance was compared in relation to identifying transcript associations with sex and CVD risk factors, such as age, high-density lipoprotein, and smoking status, and the differential blood cell count. We also identified a set of exons that vary substantially between participants, but consistently in each RNA source. Such exons are thus stable phenotypes of the participant and may potentially become useful fingerprinting biomarkers. In agreement with previous studies, we found that each of the RNA sources is distinct. Unlike PAX and PBMC, LCL gene expression showed little association with the differential blood count. LCL, however, was able to detect two genes related to smoking status. PAX and PBMC identified Y-chromosome probe sets similarly and slightly better than LCL.

Fiber alignment and coculture with fibroblasts improves the differentiated phenotype of murine embryonic stem cell-derived cardiomyocytes for cardiac tissue engineering.

Embryonic stem cells (ESCs) are an important source of cardiomyocytes for regenerating injured myocardium. The successful use of ESC-derived cardiomyocytes in cardiac tissue engineering requires an understanding of the important scaffold properties and culture conditions to promote cell attachment, differentiation, organization, and contractile function. The goal of this work was to investigate how scaffold architecture and coculture with fibroblasts influences the differentiated phenotype of murine ESC-derived cardiomyocytes (mESCDCs). Electrospinning was used to process an elastomeric biodegradable polyurethane (PU) into aligned or unaligned fibrous scaffolds. Bioreactor produced mESCDCs were seeded onto the PU scaffolds either on their own or after pre-seeding the scaffolds with mouse embryonic fibroblasts (MEFs). Viable mESCDCs attached to the PU scaffolds and were functionally contractile in all conditions tested. Importantly, the aligned scaffolds led to the anisotropic organization of rod-shaped cells, improved sarcomere organization, and increased mESCDC aspect ratio (length-to-diameter ratio) when compared to cells on the unaligned scaffolds. In addition, pre-seeding the scaffolds with MEFs improved mESCDC sarcomere formation compared to mESCDCs cultured alone. These results suggest that both fiber alignment and pre-treatment of scaffolds with fibroblasts improve the differentiation of mESCDCs and are important parameters for developing engineered myocardial tissue constructs using ESC-derived cardiac cells.

Transcriptome profiling and sequencing of differentiated human hematopoietic stem cells reveal lineage-specific expression and alternative splicing of genes.

Hematopoietic differentiation is strictly regulated by complex network of transcription factors that are controlled by ligands binding to cell surface receptors. Disruptions of the intricate sequences of transcriptional activation and suppression of multiple genes cause hematological diseases, such as leukemias, myelodysplastic syndromes, or myeloproliferative syndromes. From a clinical standpoint, deciphering the pattern of gene expression during hematopoiesis may help unravel disease-specific mechanisms in hematopoietic malignancies. Herein, we describe a human in vitro hematopoietic model system where lineage-specific differentiation of CD34(+) cells was accomplished using specific cytokines. Microarray and RNAseq-based whole transcriptome and exome analysis was performed on the differentiated erythropoietic, granulopoietic, and megakaryopoietic cells to delineate changes in expression of whole transcripts and exons. Analysis on the Human 1.0 ST exon arrays indicated differential expression of 172 genes (P < 0.0000001) and significant alternate splicing of 86 genes during differentiation. Pathway analysis identified these genes to be involved in Rac/RhoA signaling, Wnt/B-catenin signaling and alanine/aspartate metabolism. Comparison of the microarray data to next generation RNAseq analysis during erythroid differentiation demonstrated a high degree of correlation in gene (R = 0.72) and exon (R = 0.62) expression. Our data provide a molecular portrait of events that regulate differentiation of hematopoietic cells. Knowledge of molecular processes by which the cells acquire their cell-specific fate would be beneficial in developing cell-based therapies for human diseases.

Platelet inhibition and endothelial cell adhesion on elastin-like polypeptide surface modified materials.

Platelet adhesion and activation are important early markers of biomaterial blood compatibility, while surfaces that promote enhanced endothelial cell adhesion and eNOS expression are strategic targets for long term vascular graft applications. Materials surface modified with fluorinated surface modifiers, containing peptides inspired from elastin cross-linking domains, have been used for the cross-linking of elastin-like polypeptide 4 (ELP4) macromolecules onto polyurethane surfaces. In the present study, ELP4 modified polyurethanes were evaluated in vitro to assess platelet adhesion, microparticle formation and bulk platelet activation following blood-material interactions. Reduced platelet adhesion and bulk platelet activation were observed following contact between reconstituted human blood and the ELP4 materials, relative to the uncoated base polyurethane controls. ELP4 modified materials also promoted endothelial cell adhesion and retention over a period of one week and showed that the endothelial cells exhibited an organized actin cytoskeleton and enhanced endothelial nitric oxide synthase (eNOS) expression relative to the control surfaces. These results indicate that polyurethane elastomers modified with ELP4 covalently bound to fluorinated surface modifiers provide a promising approach for endowing synthetic elastomers with both reduced blood platelet activation properties and enhanced endothelial cell adhesion for potential use in vascular graft applications.

Tunable elastin-like polypeptide hollow sphere as a high payload and controlled delivery gene depot.

Self-assembly driven processes can be utilized to produce a variety of nanostructures useful for various in vitro and in vivo applications. Characteristics such as size, stability, biocompatibility, high therapeutic loading and controlled delivery of these nanostructures are particularly crucial in relation to in vivo applications. In this study, we report the fabrication of tunable monodispersed elastin-like polypeptide (ELP) hollow spheres of 100, 300, 500 and 1000 nm by exploiting the self-assembly property and net positive charge of ELP. The microbial transglutaminase (mTGase) cross-linking provided robustness and stability to the hollow spheres while maintaining surface functional groups for further modifications. The resulting hollow spheres showed a higher loading efficiency of plasmid DNA (pDNA) by using polyplex (~70 µg pDNA/mg of hollow sphere) than that of self-assembled ELP particles and demonstrated controlled release triggered by protease and elastase. Moreover, polyplex-loaded hollow spheres showed better cell viability than polyplex alone and yielded higher luciferase expression by providing protection against endosomal degradation. Overall, the monodispersed, tunable hollow spheres with a capability of post-functionalization can provide an exciting new opportunity for use in a range of therapeutic and diagnostic applications.

Surface immobilization of elastin-like polypeptides using fluorinated surface modifying additives.

Elastin-like polypeptide (ELP) surface modification represents a valuable approach for the development of biomaterials in a wide range of medical applications. In this study, ELP surface modification has been achieved through the use of elastin cross-linking peptide (ECP) bioactive fluorinated surface modifiers (ECP-BFSMs). The synthesis of low molecular weight fluorinated additives was described and their subsequent blending with a base polycarbonate urethane (PCNU) was shown to successfully enrich the surface to allow for ELP surface cross-linking via lysine moieties on the peptide segments of the ECP-BFSMs. The kinetics for the surface migration of fluorescent ECP-BFSMs was studied over a 2-week period by two-photon confocal microscopy. A decrease in advancing contact angle from 87.9° to 75.3° was observed for ECP-BFSM modified PCNU and was associated with the presence of ECP peptides on the surface. X-ray photoelectron spectroscopy demonstrated an increase in surface atomic percent of fluorine (from 0.2 to 7.2%) and nitrogen (from 1.0 to 3.0%) associated with the surface localization of fluoro groups and amide groups associated with the peptides in the ECP-BFSMs. A further increase in surface atomic percent of nitrogen (from 3.0 to 8.3%) was observed after ELP surface cross-linking. These ELP-modified surfaces were shown to promote increased smooth muscle cell adhesion, spreading and retention over a 7-day culture period relative to their non-ELP4 analogs. This novel surface modifying additive approach may be used for various biomimetic applications since it generates a stable ECM-like surface retained onto a relatively inert fluorinated background.

A novel thiol-modified hyaluronan and elastin-like polypetide composite material for tissue engineering of the nucleus pulposus of the intervertebral disc.

STUDY DESIGN: Biomechanical, in vitro, and initial in vivo evaluation of a thiol-modified hyaluronan (TM-HA) and elastin-like polypeptide (ELP) composite hydrogel for nucleus pulposus (NP) tissue engineering. OBJECTIVE: To investigate the utility of a TM-HA and ELP composite material as a potential tissue-engineering scaffold to reconstitute the NP in early degenerative disc disease (DDD) on the basis of both biomechanical and biologic parameters. SUMMARY OF BACKGROUND DATA: DDD is a common ailment with enormous medical, psychosocial, and economic ramifications. Only end-stage surgical therapies are currently widely available. A less invasive, early stage therapy may provide a clinically relevant treatment option. METHODS: TM-HA and ELP were combined in various concentrations and cross-linked using poly (ethylene glycol) diacrylate. Resulting materials were evaluated biomechanically using confined compression to determine biphasic material properties. In vitro cell culture with human intervertebral disc (IVD) cells seeded within TM-HA/ELP scaffolds was analyzed for cell viability and phenotype. The hydrogels' materials were evaluated in an established New Zealand White (NZW) rabbit model of DDD. RESULTS: The addition of ELP to TM-HA-based hydrogels resulted in a stiffer construct, which is less stiff than native NP but has time-dependant loading characteristics that may be desirable when injected into the IVD. In vitro experiments demonstrated 70% cell viability at 3 weeks with apparent maintenance of phenotype on the basis of morphologic and immunohistochemical data. The addition of ELP had a positive desirable biomechanical effect but did not have a significant positive or negative biologic effect on cell activity. The in vivo feasibility study demonstrated favorable material characteristics and biocompatibility for application as a minimally invasive injectable NP supplement. CONCLUSIONS: TM-HA-based hydrogels provide a hospitable environment for human IVD cells and have material characteristics, particularly when supplemented with ELPs that are attractive for potential application as an injectable NP supplement.

Bioactivation of porous polyurethane scaffolds using fluorinated RGD surface modifiers.

Biomaterial scaffolds for tissue engineering require appropriate cell adhesion, proliferation, and infiltration into their three-dimensional (3D) porous structures. Surface modification techniques have the potential to enhance cell infiltration into synthetic scaffolds while retaining bulk material properties intact. The objective of this work was to assess the potential of achieving a uniform surface modification in 3D porous constructs through the blending of surface-modifying additives known as bioactive fluorinated surface modifiers (BFSMs) with a base polyurethane material. By coupling RGD peptides to the fluorinated surface modifiers to form RGD-BFSMs, the BFSMs can act as a vehicle for the delivery of RGD moieties to the surface without direct covalent attachment to the polymer substrate. Fluorescent RGD-BFSMs were shown to migrate to the polymer-air interfaces within the porous scaffolds by two-photon confocal microscopy. A-10 rat aortic smooth muscle cells were cultured for 4 weeks on nonmodified and RGD-BFSM-modified porous scaffolds, and cell adhesion, proliferation, and viability were quantified at different depths. RGD-BFSM-modified scaffolds showed significantly greater cell numbers within deeper regions of the scaffolds, and this difference became more pronounced over time. This study demonstrates an effective approach to promote cell adhesion and infiltration within thick (approximately 0.5 cm) porous synthetic scaffolds by providing a uniform distribution of adhesive peptide throughout the scaffolds without the use of covalent surface reaction chemistry.