RESUMEN
The research on developing a purification technology for 2,4-dichlorophenol (2,4-DCP) polluted water with high efficiency and the low energy consumption is crucial for achieving several Sustainable Development Goals (SDGs). In order to achieve these goals, MWCNTs-Pd/Fe nanocomposites were prepared by Fe nanoparticles modified with multi-walled carbon nanotubes (MWCNTs) and palladium (Pd) in the presence of ultrasonic irradiation. The MWCNTs-Pd/Fe nanocomposites were characterized by using Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), and X-Ray Diffraction (XRD), and others. Characterization results confirmed that the MWCNTs-Pd/Fe was successfully prepared, with the particle size of 80 nm and the specific surface area of 89.5 m2/g confirmed. We studied the reductive dechlorination of 2,4-Dichlorophenol (2,4-DCP) by MWCNTs-Pd/Fe nanocomposites under different conditions, and the optimized experimental results were found when the Pd loading was 0.4 %, the pH was 3, and the temperature was 30 °C. The phenol yield increased from 76.5 % (without ultrasonic irradiation) to 92.3 % (with ultrasonic irradiation) in 300 min and the 2,4-DCP removal rate reached 98.7 % under the optimal conditions. Therefore, ultrasonic irradiation enhanced the performance of MWCNTs-Pd/Fe nanocomposites for 2,4-DCP removal. We also established the degradation mechanism of chlorophenol by analyzing the intermediates, and proposed the degradation kinetics model. The degradation of 2,4-DCP followed the pseudo-first-order kinetics with the rate constant of 0.05988 min-1. Also, this study demonstrated the potential of using ultrasonic irradiation to improve the properties and recovery of MWCNTs-Pd/Fe nanocomposites, contributing to achievement of the Sustainable Development Goals (SDGs), including SDG-3, SDG-6.
RESUMEN
[Purpose] Sandstone reservoirs under the influence of igneous rocks have become some of the most important complex reservoirs. The accurate description of the distribution for this type of reservoir is a major technical problem in hydrocarbon exploration and development. Geological modeling is the fundamental work of reservoir research. However, there is relatively little research on the reservoir modeling of sandstone reservoirs under the influence of igneous rocks. [Method] In this study, taking the Bohai X oilfield as the research object, the distribution characteristics of sandstone reservoirs were characterized, and a quantitative identification method for igneous rocks was established based on seismic, logging, and drilling data. The impact of igneous rocks on sandstone reservoirs was analyzed, and a structural model under a sequence stratigraphic framework was constructed. And then, a three-dimensional geological model of sandstone reservoirs under the influence of igneous rocks was established. [Results] The results show that the physical properties of sandstone reservoirs deteriorate due to the extrusive igneous rocks in the zone with a complex fracture system and the area that volcanic channel developed. After that, referring to the identification and modeling methods of salt domes and using the fine identification and tracking results of volcanic rocks, the volcanic rocks are extracted as attribute bodies, which are finally nested into the geological model. At the same time, according to the influence degree of igneous rocks, a three-dimensional (3D) model was established, which can not only characterize the structure of igneous rocks but also reflect the development of reservoirs. [Conclusions] The research results can better guide the implementation of development wells, avoid reservoir risks, and significantly improve the accuracy of numerical simulation.
RESUMEN
The research on developing a purification technology for Cr(â ¥) polluted water with high efficiency and the low energy consumption is crucial for achieving several Sustainable Development Goals (SDGs). In order to achieve these goals, Fe3O4@SiO2-APTMS nanocomposites were prepared by Fe3O4 nanoparticles modified with silica and 3-aminopropyltrimethoxysilane in the presence of ultrasonic irradiation. The nanocomposites were characterized by TEM, FT-IR, VSM, TGA, BET, XRD, XPS and these analytic results proved that the nanocomposites were successfully prepared. The influential factors of Fe3O4@SiO2-APTMS on Cr(â ¥) adsorption have been explored and better experimental conditions have been obtained. The adsorption isotherm conformed to the Freundlich model. Pseudo-second-order kinetic model provided a better correlation for the experimental data compared to other kinetic models. Thermodynamic parameters for adsorption indicated that the adsorption of Cr(â ¥) was a spontaneous process. It was speculated that the adsorption mechanism of this adsorbent includes redox, electrostatic adsorption and physical adsorption. In summary, the Fe3O4@SiO2-APTMS nanocomposites were of great significance to human health and the remediation of heavy ion pollution, contributing to achievement of the Sustainable Development Goals (SDGs), including SDG-3, SDG-6.
