Lithium-Ion-Doped Eutectogel for Surface-Capacitive Sensing Touch Panel.

Touch panels are deemed as a critical platform for the future of human--computer interaction. Recently, flexible touch panels have attracted much attention due to their superior adhesivity and integratability to the human body. However, hydrogel- or organogel-based devices suffer from instability due to liquid evaporation or low-conductivity substrates. It demands an alternative functional touch panel featuring temperature tolerance, high conductivity, and stretchability. Here, we introduce an eutectogel by immobilizing a novel deep eutectic solvent (DES) within 2-hydroxyethyl acrylate (HEA) covalently cross-linked polymer scaffolds. In this DES (ethylene carbonate(EC)-LiTFSI), the C═O group of EC is unique as an electron donor exhibiting strong coordination interactions with Li+, promoting the dissociation of Li+ from LiTFSI to achieve excellent conductivity. Benefiting from their traits, eutectogel presents high conductivity, transmittance, antifreezing, and mechanical strength. In addition, using the surface-capacitive sensing mechanism, the eutectogel can be designed as a 1D strip and 2D rectangular touch panel which can achieve high-resolution touching tracks, even in a low-temperature environment and pressure-then-recovered state. This eutectogel strategy is envisioned to facilitate the development of next-generation intelligent devices, especially in extreme stretching and low-temperature application scenarios.

Predictors of medical staff's knowledge, attitudes and behavior of dysphagia assessment: A cross-sectional study.

PURPOSE: This study aimed to explore the predictors of medical staff's Knowledge, Attitudes and Behavior of dysphagia assessment, to provide reference suggestions for constructing the training program and improving the rate of dysphagia assessment. METHODS: This study was a cross-sectional study. A total of 353 nurses and doctors from four provinces (Guangdong, Hunan, Guangxi, and Shaanxi) who were selected by convenience sampling and invited to complete the questionnaire through WeChat, DingTalk, and Tencent instant messenger from May 23 to 31, 2022. A self-reported questionnaire was used to assess participants' Knowledge, Attitude and Behavior regarding dysphagia assessment. Participants' sociodemographic, training, and nursing experience were measured using the general information sheet and analyzed as potential predictors of medical staff's Knowledge, Attitudes and Behavior of dysphagia assessment. A multiple linear regression model was used to identify the predictors. RESULTS: The mean scores for Knowledge, Attitudes and Behavior of dysphagia assessments were (15.3±2.7), (35.9±4.9) and (41.4±14.4) respectively. Knowledge and Behavior of medical staff were medium, and attitude was positive. Multiple linear regression results indicated that experience in nursing patients with dysphagia, related training for dysphagia, working years in the field of dysphagia related diseases, specialized training (geriatric, swallowing and rehabilitation) and department (Neurology, Rehabilitation, Geriatrics) were significant predictors of Behavior, accounting for 31.5% of the variance. Working years in the field of dysphagia related diseases, department (Neurology, Rehabilitation, Geriatrics) and title were significant predictors of medical staff's knowledge, accounting for 7.8% of variance. Education, experience in nursing patients with dysphagia, department (Neurology, Rehabilitation, Geriatrics) and related training for dysphagia were significant predictors of medical staff's attitude, accounting for 12.9% of variance. CONCLUSIONS: The study findings implied that nursing experience, training, and work for patients with swallowing disorders could have positive effects on the Knowledge, Attitudes and Behavior of medical staff regarding dysphagia assessment. Hospital administrators should provide relevant resources, such as videos of dysphagia assessment, training centers for the assessment of dysphagia, and swallowing specialist nurses.

Self-supporting noncovalent Choline Alginate/Tannic acid/Ag antibacterial films for strawberry preservation.

Packaging materials with peculiar antibacterial properties can shield off and inhibit microorganism proliferation, thus achieving packaging goals such as fresh-keeping, good hygiene, and biosafety. Especially, antibacterial films made of biocompatible substances have received wide attentions, which could effectively extend the shelf life, enhance food security, and guarantee economic benefits. Herein, a self-supporting hybrid antibacterial film was prepared based on non-covalently linked choline hydroxide (ChOH) and alginic acid (HAlg). Then tannic acid (TA) and silver ions were added to improve the mechanical and antimicrobial properties of this hybrid film. The rich hydroxyl groups from TA not only form multiple hydrogen bonds with ChAlg, but can also in situ reduce silver ions to silver nanoparticles, which were confirmed with various characterizations. In addition, the quantitative antibacterial test proved that the antibacterial rate was significantly improved after adding silver ions, reaching >60 %. In an actual storage test, we found that choline cation (Ch+) captured in antibacterial film by electrostatic interaction could achieve sustained release, i.e. sustainable bacteriostasis, and keep strawberries fresh for 48 h at room temperature. This work offers a new strategy for preparing antibacterial films via non-covalent weak interactions, explored an alternative antibacterial film for food packaging applications.

Liquid Crystal Electrolyte with Lamellar Ionic Channels for All-In-One Gel Flexible Supercapacitor.

Liquid crystalline hydrogels with nanoscale order are an attractive soft material to transport ions or electrons with high efficiency. By employing noncovalent interactions between amphiphiles and solvents, defined anisotropic ordered structures can assemble that serve as interior transmissible channels. Herein, the phase behaviors of a polymerizable amphiphile of 1-vinyl-3-alkylimidazolium bromide (VCn IMBr, n = 12, 14, 16) are investigated at different concentrations in a deep eutectic solvent. The aggregation such as micelle, hexagonal, and lamellar liquid crystal phase is created. Through in-phase polymerization, the lamellar structures within an an isotropic liquid crystal can be well solidified to obtain a conductive gel electrolyte. A sandwich-structured all-in-one gel flexible supercapacitor is then built with this specific gel electrolyte. With greatly increased adhesion and minimized interfacial resistance between electrode and electrolyte, the approach will be able to create energy-storage devices with anisotropic ionic and electronic charge transportations envisioned for various electrochemical applications.

DNA Nanobarrel-Based Drug Delivery for Paclitaxel and Doxorubicin.

Co-delivery of anticancer drugs and target agents by endogenous materials is an inevitable approach towards targeted and synergistic therapy. Employing DNA base pair complementarities, DNA nanotechnology exploits a unique nanostructuring method and has demonstrated its capacity for nanoscale positioning and templated assembly. Moreover, the water solubility, biocompatibility, and modifiability render DNA structure suitable candidate for drug delivery applications. We here report single-stranded DNA tail conjugated antitumor drug paclitaxel (PTX), and the co-delivery of PTX, doxorubicin and targeting agent mucin 1 (MUC-1) aptamer on a DNA nanobarrel carrier. We investigated the effect of tail lengths on drug release efficiencies and dual drug codelivery-enabled cytotoxicity. Owing to the rapidly developing field of structural DNA nanotechnology, functional DNA-based drug delivery is promising to achieve clinical therapeutic applications.

Retinex Image Enhancement Based on Sequential Decomposition With a Plug-and-Play Framework.

The Retinex model is one of the most representative and effective methods for low-light image enhancement. However, the Retinex model does not explicitly tackle the noise problem and shows unsatisfactory enhancing results. In recent years, due to the excellent performance, deep learning models have been widely used in low-light image enhancement. However, these methods have two limitations. First, the desirable performance can only be achieved by deep learning when a large number of labeled data are available. However, it is not easy to curate massive low-/normal-light paired data. Second, deep learning is notoriously a black-box model. It is difficult to explain their inner working mechanism and understand their behaviors. In this article, using a sequential Retinex decomposition strategy, we design a plug-and-play framework based on the Retinex theory for simultaneous image enhancement and noise removal. Meanwhile, we develop a convolutional neural network-based (CNN-based) denoiser into our proposed plug-and-play framework to generate a reflectance component. The final image is enhanced by integrating the illumination and reflectance with gamma correction. The proposed plug-and-play framework can facilitate both post hoc and ad hoc interpretability. Extensive experiments on different datasets demonstrate that our framework outcompetes the state-of-the-art methods in both image enhancement and denoising.

Wide-Temperature Flexible Supercapacitor from an Organohydrogel Electrolyte and Its Combined Electrode.

Hydrogel-based flexible supercapacitors possess the merits of highly ionic conductivity and superior power density, but the existence of water limits their application in extreme temperature scenarios. Noticeably, it is a challenge for people to design more extremely temperature adaptable systems for flexible supercapacitors based on hydrogels with a wide temperature region. In this work, a wide-temperature flexible supercapacitor that can operate at -20-80 °C was fabricated by an organohydrogel electrolyte and its combined electrode (also known as an electrode/electrolyte composite). Upon introducing highly hydratable LiCl into an ethylene glycol (EG)/H2 O binary solvent, owing to the ionic hydration effect of LiCl and the hydrogen bond interaction between EG and H2 O molecules, the organohydrogel electrolyte exhibits satisfactory resistance to freezing (freezing point of -113.9 °C), anti-drying capability (78.2 % of weight retention after vacuum drying at 60 °C for 12 h) and excellent ionic conductivity both at room temperature (13.9 mS cm-1 ) and low temperature (6.5 mS cm-1 after 31 days at -20 °C). By using organohydrogel electrolyte as binder, the prepared electrode/electrolyte composite effectively reduces interface impedance and enhances specific capacitance due to the uninterrupted ion transport channels and extended interface contact area. The assembled supercapacitor delivers a specific capacitance of 149 F g-1 , a power density of 160 W kg-1 , and an energy density of 13.24 Wh kg-1 at a current density of 0.2 A g-1 . The initial 100 % capacitance can be maintained after 2000 cycles at 1.0 A g-1 . More importantly, the specific capacitances can be well maintained even at -20 and 80 °C. With other advantages such as excellent mechanical property, the supercapacitor is an ideal power source suitable for various working conditions.

"Water-in-Deep Eutectic Solvent" Gel Electrolytes Synergistically Controlled by Solvation Regulation and Gelation Strategies for Flexible Electronic Devices.

Recent developments in flexible electronics have heightened the need for electrolytes with high safety, ionic conductivity, and electrochemical stability. However, neither conventional organic electrolytes nor aqueous electrolytes can meet the above requirements simultaneously. Herein, a novel "water-in-deep eutectic solvent" gel (WIDG) electrolyte synergistically controlled by the solvation regulation and gelation strategies is reported. The water molecules introduced into deep eutectic solvent (DES) participate in the solvation structure regulation of Li+, thus endowing the WIDG electrolyte with high safety, thermal stability, and outstanding electrochemical performance, including high ionic conductivity (∼1.23 mS cm-1) and a wide electrochemical window (∼5.4 V). Besides, the polymer in the gel interacts with DES and H2O, further optimizing the electrolyte with excellent mechanical strength and higher operating voltage. Benefiting from these advantages, the lithium-ion capacitor constructed by WIDG electrolyte presents a high areal capacitance of 246 mF cm-2 with an energy density of 87.3 µWh cm-2. The use of the gel enhances the electrode structure stability, resulting in desirable cycling stability (>90% capacity retention after 1400 cycles). Moreover, the WIDG-assembled sensor exhibits high sensitivity and rapid real-time detection of motion. This work will provide guidelines for designing high-safety and high-operating-voltage electrolytes for flexible electronics.

Hydrogels as the plant culture substrates: A review.

A class of hydrophilic polymers known as "hydrogels" have extensive water content and three-dimensional crosslinked networks. Since the old period, they have been utilized as plant culture substrates to get around the drawbacks of hydroponics and soil. Numerous hydrogels, particularly polysaccharides with exceptional stability, high clarity, and low cost can be employed as plant substrates. Although numerous novel and functionalized hydrogels might assist in overcoming the drawbacks of conventional media and giving them more functions, the existing hydrogel-based plant growth substrates rarely benefit from the developments of gels in the previous few decades. Prospects include the development of new conduction techniques, the creation of potential new hydrogels, and the functionalization of the hydrogel as plant culture substrates.

Polyelectrolyte aerogels with regeneration capacity for efficient removal of particulate matters.

HYPOTHESIS: With the rapid development of economy and global industrialization, the problem of air pollution has become a worldwide topic. The efficient filtration of airborne particulate matters (PMs) is critical for human health and environmental sustainability. EXPERIMENTS: Herein, self-supporting bio-based polyelectrolyte aerogels were prepared and acted as the advanced filters for efficient removal of PMs. The natural choline cation (Ch+) or the organic cation, 1-butyl-3-methylimidazolium (Bmim+), are introduced into alginate (Alg-) to form the polyelectrolytes of ChAlg or BmimAlg due to the electrostatic interaction. By the directional freeze-drying in liquid N2, hierarchically porous aerogels with mechanical robustness, flexibility and thermo-stability were prepared. This specific structure may permit the polluted air to pass adequately through the aerogel channels, which are conducive to intercept various PMs with different diameters. FINDINGS: As an example, the removal efficiency of ChAlg aerogels for PM10, PM2.5 and PM0.3 are respectively up to (99.24 ± 0.03)%, (99.22 ± 0.02)%, and (93.41 ± 0.22)% within 15 h durability test. One outstanding character lies in ensuring high removal efficiency, while achieving a good balance with the low pressure drop (10 Pa), which is driven by synergistic effect of passive trapping and electrostatic capture. Moreover, the polyelectrolyte aerogels exhibit excellent antimicrobial activity and regenerated capacity. These properties endow the aerogels of polyelectrolyte ChAlg or BmimAlg with remarkable potential as new advanced filters for masks and other personal protective equipment.

Multistimuli-Responsive and Antifreeze Aggregation-Induced Emission-Active Gels Based on CuNCs.

Multistimuli-responsive fluorescent gelsbased small molecular gelator by supramolecular assembly, possessing excellent dynamic and reversible characteristic, have caused much concern. In this article, aggregation-induced emission-active fluorescence gels (AIE-gels) with chirality were developed by combining Cu nanoclusters (CuNCs) and natural amino acids, l-tryptophan (l-Trp) or d-Tryptophan (d-Trp). In DMSO/H2O mixed solvents, CuNCs can self-assemble to form intertwined fibersbased nanoparticles with numerous pores by introducing Zn2+. Fibers as second networks of heteronetwork structures are characterized with the participation of l-Trp or d-Trp for cross-linking to reinforce mechanical strength and chiral regulation of gel networks. Aggregation-induced emission enhancement (AIEE) of CuNCs endows the gels with excellent fluorescent properties by introducing solvents and gelation process. The fluorescent gels exhibit sufficient fluorescence intensity (FI) at -20 °C to -80 °C and possess sensitive responsibility including gel-sol transition and fluorescence behavior for stimuli of mechanical force, heating, pH, H2O2, and ethylene diamine tetraacetic acid (EDTA).

Photovoltaic Energy Conversion and Storage of Micro-Supercapacitors Based on Emulsion Self-Assembly of Upconverting Nanoparticles.

With the rapid need for new kinds of portable and wearable electronics, we must look to develop flexible, small-volume, and high-performance supercapacitors that can be easily produced and stored in a sustainable way. An integrated system simultaneously converting recyclable energy to electricity and storing energy is sought after. Here we report photovoltaic energy conversion and storage integrated micro-supercapacitors (MSCs) with asymmetric, flexible, and all-solid-state performances constructed from thousands of close-packed upconverting nanoparticles (UCNPs) via an emulsion-based self-assembly process using oleic acid (OA)-capped upconverting nanoparticles. The carbonated-UCNPs supraparticles (CSPs) are further coated with polypyrrole (PPy) to improve their electrochemical performance. Such a design can develop CSPs@PPy as electrode materials with high gravimetric capacitance, 308.6 F g-1 at 0.6 A g-1. The fabricated MSCs exhibit excellent areal capacitance, C s = 21.8 mF cm-2 at 0.36 A cm-2 and E = 0.00684 mWh cm-2, and have superior flexibility and cycling ability. The MSC devices have a sensitive near-infrared ray (NIR) photoelectrical response capability, which can capture the NIR of sunlight to convert it into electrical energy and store the electric energy due to an excellent capacitive performance. We propose a method for multifunctional integration of energy conversion and storage, and provide future research directions and potential applications of self-powered flexible wearable photonic electronics.

Nanoemulsion fluorescent inks for anti-counterfeiting encryption with dual-mode, full-color, and long-term stability.

An oil-in-water nanoemulsion (O/W NE) is selected as the carrier to encapsulate hydrophobic dual-mode luminescent upconversion nanoparticles (UC NPs) and downconversion (DC) carbon quantum dots (CQDs) inside the oil droplets for forming water-based fluorescent inks. The NE inks conform well to the requirements of inkjet printing for anti-counterfeiting encryption applications.

Colloidal clusters of icosahedrons and face-centred cubes.

Synthetically colloidal clusters with new functions and well-controlled size distribution can in principle be constructed using colloidal particles. The building units could be integrated into dense-packed and desired structured with novel functions by means of an efficient strategy or binding patterns. Here we synthesized colloidal clusters of icosahedrons and long-range ordered face-centered cubes (FCCs) via emulsion self-assembly using fluorescence upconversion nanoparticles NaGdF4: Yb3+, Er3+ as building blocks. The icosahedrons and FCCs structure may generate spontaneously due to an entropy-driven process. The morphology and structure of colloidal clusters have noticeable transformation from icosahedron-like symmetry to FCC symmetry with the increasing size of clusters. Furthermore, the colloidal clusters could be decorated with cationic polyethyleneimine (PEI) via electrostatic interaction. When copper ions are added, the amino groups of PEI could coordinate with Cu2+ forming low toxic PEI-Cu2+ layers, which can further serve as energy receptors to quench upconversion fluorescence with 980 nm laser excitation. Our results reflect that the colloidal clusters not only can serve as a fluorescence platform of detection and analysis but also may represent advancement in the field of colloidal and interface sciences.