A Critical Review on Immobilized Sucrose Isomerase and Cells for Producing Isomaltulose.

Isomaltulose is a novel sweetener and is considered healthier than the common sugars, such as sucrose or glucose. It has been internationally recognized as a safe food product and holds vast potential in pharmaceutical and food industries. Sucrose isomerase is commonly used to produce isomaltulose from the substrate sucrose in vitro and in vivo. However, free cells/enzymes were often mixed with the product, making recycling difficult and leading to a significant increase in production costs. Immobilized cells/enzymes have the following advantages including easy separation from products, high stability, and reusability, which can significantly reduce production costs. They are more suitable than free ones for industrial production. Recently, immobilized cells/enzymes have been encapsulated using composite materials to enhance their mechanical strength and reusability and reduce leakage. This review summarizes the advancements made in immobilized cells/enzymes for isomaltulose production in terms of refining traditional approaches and innovating in materials and methods. Moreover, innovations in immobilized enzyme methods include cross-linked enzyme aggregates, nanoflowers, inclusion bodies, and directed affinity immobilization. Material innovations involve nanomaterials, graphene oxide, and so on. These innovations circumvent challenges like the utilization of toxic cross-linking agents and enzyme leakage encountered in traditional methods, thus contributing to enhanced enzyme stability.

Study on the effect of different high-voltage electric field polarization process parameters on the vitality of dried chili pepper seeds.

To study the effect of different high-voltage electric field polarisation treatment process parameters on the viability of seeds of dried chili peppers. In this study, a high-voltage electrostatic polarisation treatment system was constructed to carry out experiments on the effects of different high-voltage electric field polarisation treatment process parameters on the viability of dried chili seeds. Conduct one-way tests to determine the preferred polarisation method and the preferred interval for output voltage and polarisation time. Two-factor, five-level central combination test with output voltage and polarization time as test factors and seed conductivity as a response indicator. Determining the better combination of parameters for output voltage and polarization time; Conducting seed germination trials to validate the effectiveness of the polarisation process. The results of the one-way test showed that: Negative-voltage polarisation was more effective than positive-voltage polarisation and alternating positive-negative-voltage polarisation in promoting seed vigor, with a better output voltage in the range of 10-14 kV, and a better polarisation time in the range of 20-40 s; The results of orthogonal tests showed that: Under the condition of negative voltage polarisation treatment, the output voltage of 12.08 kV and polarisation time of 30.32 s was the better parameter combination, at which the seed conductivity was minimum 159.87 uS/(cm g). Analyzing the function of cell membrane selective semi-permeability by seed conductivity change and revealing the mechanism of seed viability enhancement by high voltage electric field polarisation treatment; In the seed germination test, compared with the control group, seed germination potential increased by 9.09%, germination rate increased by 20.45%, germination index increased by 3.49, and vigor index increased by 41.66 under high-voltage electrostatic polarisation treatment, and all vigor indexes were significantly improved. The results of this study can provide a basis for the selection of processes and parameters for subsequent high-voltage electric field polarisation treatment of crop seeds.

Natural flavonoid hesperetin blocks amyloid ß-protein fibrillogenesis, depolymerizes preformed fibrils and alleviates cytotoxicity caused by amyloids.

The aggregation of ß-amyloid (Aß) peptides to form amyloid plaques is one of the primary hallmarks for Alzheimer's disease (AD). Dietary flavonoid supplements containing hesperetin have an ability to decline the risk of developing AD, but the molecular mechanism is still unclear. In this work, hesperetin, a flavanone abundant in citrus fruits, has been proven to prevent the formation of Aß aggregates and depolymerized preformed fibrils in a concentration-dependent fashion. Hesperetin inhibited the conformational conversion from the natural structure to a ß-sheet-rich conformation. It was found that hesperetin significantly reduced the cytotoxicity and relieved oxidative stress eventuated by Aß aggregates in a concentration-dependent manner. Additionally, the beneficial effects of hesperetin were confirmed in Caenorhabditis elegans, including the inhibition of the formation and deposition of Aß aggregates and extension of their lifespan. Finally, the results of molecular dynamics simulations showed that hesperetin directly interacted with an Aß42 pentamer mainly through strong non-polar and electrostatic interactions, which destroyed the structural stability of the preformed pentamer. To summarize, hesperetin exhibits great potential as a prospective dietary supplement for preventing and improving AD.

Improving the thermal stability and catalytic activity of ulvan lyase by the combination of FoldX and KnowVolution campaign.

Thermal stability is one of the most important properties of ulvan lyases for their application in algae biomass degradation. The Knowledge gaining directed eVolution (KnowVolution) protein engineering strategy could be employed to improve thermostability of ulvan lyase with less screening effort. Herein, the unfolding free energies (ΔΔG) of the loop region were calculated using FoldX and four sites (D103, G104, T113, Q229) were selected for saturation mutagenesis, resulting in the identification of a favorable single-site mutant Q229M. Subsequently, iteration mutation was carried out with the mutant N57P (previously obtained by our group) to further enhance the performance of ulvan lyase. The results showed that the most beneficial variant N57P/Q229M exhibited a 1.67-fold and 2-fold increase in residual activity compared to the wild type after incubation at 40 °C and 50 °C for 1 h, respectively. In addition, the variant produced 1.06 mg/mL of reducing sugar in 2 h, which was almost four times as much as the wild type. Molecular dynamics simulations revealed that N57P/Q229M mutant enhanced the structural rigidity by augmenting intramolecular hydrogen bonds. Meanwhile, the shorter proton transmission distance between the general base of the enzyme and the substrate contributed to the glycosidic bond breakage. Our research showed that in silico saturation mutagenesis using position scan module in FoldX allowed for faster screening of mutants with improved thermal stability, and combining it with KnowVolution enabled a balanced effect of thermal stability and enzyme activity in protein engineering.

Construction and Catalytic Study of Affinity Peptide Orientation and Light Crosslinking Immobilized Sucrose Isomerase.

A novel affinity peptide orientation and light-controlled covalent immobilized method was developed. Sucrose isomerase (SI) was selected as the model enzyme. Molecular simulation was first performed to select the targeted immobilization region. Subsequently, a short peptide (H2N-VNIGGX-COOH, VG) with high affinity to this region was rationally designed. Thereafter, 4-benzoyl-l-phenylalanine with the photosensitive group of benzophenone was introduced. Then, the affinity between the ligand and the SI was validated using molecular dynamics simulation. Thereafter, the SI was directionally immobilized onto the surface of the epoxy resin (EP) guided by VG via photo-crosslinking, and thus the oriented photo-crosslinking enzymes were obtained. The enzymatic activity, thermostability, and reusability of the affinity directional photo-crosslinked immobilized sucrose isomerase (hv-EP-VG-SI) were systematically studied. The oriented immobilization enzymes were significantly improved in recycling and heat resistance. Moreover, hv-EP-VG-SI retained more than 90% of the original activity and 50% of the activity after 11 cycles.

Genome-Wide Selection Signal Analysis to Investigate Wide Genomic Heredity Divergence between Eurasian Wild Boar and Domestic Pig.

As important livestock species, pigs provide essential meat resources for humans, so understanding the genetic evolution behind their domestic history could help with the genetic improvement of domestic pigs. This study aimed to investigate the evolution of convergence and divergence under selection in European and Asian domestic pigs by using public genome-wide data. A total of 164 and 108 candidate genes (CDGs) were obtained from the Asian group (wild boar vs. domestic pig) and the European group (wild boar vs. domestic pig), respectively, by taking the top 5% of intersected windows of a pairwise fixation index (FST) and a cross population extended haplotype homozygosity test (XPEHH). GO and KEGG annotated results indicated that most CDGs were related to reproduction and immunity in the Asian group. Conversely, rich CDGs were enriched in muscle development and digestion in the European group. Eight CDGs were subjected to parallel selection of Eurasian domestic pigs from local wild boars during domestication. These CDGs were mainly involved in olfactory transduction, metabolic pathways, and progesterone-mediated oocyte maturation. Moreover, 36 and 18 haplotypes of INPP5B and TRAK2 were identified in this study, respectively. In brief, this study did not only improve the understanding of the genetic evolution of domestication in pigs, but also provides valuable CDGs for future breeding and genetic improvement of pigs.

N-acyl homoserine lactone mediating initial adhesion of microalgal biofilm formation.

While pioneering methods have demonstrated that bacterial N-acyl homoserine lactone (AHL) signaling molecules can influence the growth and self-aggregation of suspended microalgae, whether AHLs can affect the initial adhesion to a carrier has remained an open question. Here we revealed that the microalgae exhibited different adhesion potential under AHL mediation, where the performance was affiliated to both AHL types and concentrations. The result can be well explained by the interaction energy theory, where the energy barrier between the carriers and the cells varied due to AHL mediation. Depth analyses revealed that AHL acted through modifying the properties of the surface electron donor of the cells, which were dependent upon three major components, i.e., extracellular protein (PN) secretion, the PN secondary structure, and the PN amino acid composition. These findings expand the known diversity of AHLs mediation on microalgal initial adhesion and metabolisms, which may interface with other major cycles and become helpful to theoretically guide the application of AHLs in microalgal culture and harvesting.

Sensing prior constraints in deep neural networks for solving exploration geophysical problems.

One of the key objectives in geophysics is to characterize the subsurface through the process of analyzing and interpreting geophysical field data that are typically acquired at the surface. Data-driven deep learning methods have enormous potential for accelerating and simplifying the process but also face many challenges, including poor generalizability, weak interpretability, and physical inconsistency. We present three strategies for imposing domain knowledge constraints on deep neural networks (DNNs) to help address these challenges. The first strategy is to integrate constraints into data by generating synthetic training datasets through geological and geophysical forward modeling and properly encoding prior knowledge as part of the input fed into the DNNs. The second strategy is to design nontrainable custom layers of physical operators and preconditioners in the DNN architecture to modify or shape feature maps calculated within the network to make them consistent with the prior knowledge. The final strategy is to implement prior geological information and geophysical laws as regularization terms in loss functions for training the DNNs. We discuss the implementation of these strategies in detail and demonstrate their effectiveness by applying them to geophysical data processing, imaging, interpretation, and subsurface model building.

The relationship between the baseline geriatric nutritional risk index (GNRI) and neurological function at the convalescence stage in patients with stroke: a cross-sectional study.

BACKGROUND: Malnutrition is a common complication after stroke and may worsen neurological outcomes for patients. There are still no uniform tools for screening nutritional status for the patients with stroke. We aimed to explore the relationship between the baseline geriatric nutritional risk index (GNRI) and neurological function at the convalescence stage for patients with stroke and assessed the predictive value of the GNRI for adverse neurological outcomes. METHODS: A total of 311 patients with stroke were enrolled retrospectively. Basic information and laboratory results on admission since onset of stroke were collected. The GNRI on admission was calculated and neurological outcomes evaluated by the Barthel index at 1 month after the onset of stroke. Statistical analyses, including correlation coefficient tests, multivariate regression analyses, and receiver operating characteristic (ROC) analyses, were applied in this study. RESULTS: Compared with the good outcome group, the poor outcome group showed a significantly lower GNRI on admission (P < 0.05). GNRI was associated with Barthel index (r = 0.702, P < 0.01). The GNRI was independently correlated with the Barthel index (Standardization ß = 0.721, P < 0.01) and poor outcome 0.885 (95% CIs, 0.855-0.917, P < 0.01) after adjusting for covariates. Compared with no nutritional risk grades (Q4), the OR of GNRI to poor neurological outcome increased across increasing nutritional risk grades of GNRI (OR = 2.803, 95% CIs = 1.330-5.909 in Q3, 7.992, 95% CIs = 3.294-19.387 in Q2 and 14.011, 95% CIs = 3.972-49.426 in Q1, respectively, P for trend < 0.001). The area under ROC curves (AUC) of the GNRI was 0.804, which was larger than that of the NIHSS, BMI, or Albumin (P < 0.01), with an optimal cut-off value of 97.69, sensitivity of 69.51% and specificity of 77.27%. Combined GNRI with NIHSS gained the largest AUC among all the variables (all P < 0.05), with an AUC of 0.855, sensitivity of 84.75 and specificity of 72.73%. CONCLUSIONS: For patients with stroke, higher nutritional risk grades at baseline indicated worse neurological function at the convalescence stage. Compared with NIHSS, BMI, and Albumin, GNRI was a competitive indicator for the risk of poor neurological outcome. The predictive property of GNRI for adverse neurological outcomes might be more powerful when combined with NIHSS.

[Teaching reform and practice of 'Production Internship' course for biotechnology specialty from the perspective of training application-oriented talents].

Production internship is an important teaching tache for undergraduate students to carry out engineering training by using professional skills, and it is a key starting point for fostering application-oriented talents in biotechnology. The Course Group of 'production internship of biotechnology majors' of Binzhou University is investigating application-oriented transformation for local regular colleges and universities, as well as fostering high-level application-oriented talents. By taking green fluorescent protein (GFP) polyclonal antibody as an example, the reform and practice on teaching content, teaching mode, assessment method, continuous improvement of curriculum were carried out. Moreover, the characteristics of the Yellow River Delta-Binzhou Biotechnology & Pharmaceutical Industrial Cluster were taken into account to intensify academic-enterprise cooperation. On one hand, this Course Group designed and rearranged the course contents, carried out essential training through online resources and platforms such as virtual simulation, and recorded, tracked and monitored the progress of production internship through practical testing and software platforms like 'Alumni State'. On the other hand, this Course Group established a practice-and application-oriented assessment method in the process of production internship and a dual evaluation model for continuous improvement. These reform and practices have promoted the training of application-oriented talents in biotechnology, and may serve as a reference for similar courses.

Interfacial impedance model and ion diffusion mechanism of MXene/NiCo-LDHs interstratification hybrid assembly electrode.

In previous studies, our research team found that the two-dimensional interstratification assembly electrode has the advantage of high energy density. However, the impedance mechanism model and interface ion diffusion law under different interstratification assembly methods are not clear. Here, we used two-dimensional MXene and NiCo-LDHs as raw materials, and prepared 1:3, 1:1 and 3:1 interstratification assembled MXene/NiCo-LDHs composite electrodes by the substrate surface direct spray method, respectively. The impedance analysis was carried out by electrochemical impedance spectroscopy (EIS), respectively, and the diffusion coefficients of OH- ions in three models were measured and calculated by electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV) and galvanostatic intermittent titration technique (GITT). Studies have shown that for 2D interstratification assembled electrodes, when the pseudocapacitive layer is closer to the electrolyte (when MXene:NiCo-LDHs = 1:3), the interface impedance is the smallest (Rct = 56.5 Ω), the ion diffusion efficiency is the fastest (DOH- (M1L3) = 7.5706 × 10-15 cm2 s-1), and the electrochemical performance is the best, which provides important guidance for the design of two-dimensional interstratification assembled electrodes.

Robust Second-Order Topological Insulators with Giant Valley Polarization in Two-Dimensional Honeycomb Ferromagnets.

Magnetic topological states have attracted great attention that provide exciting platforms for exploring prominent physical phenomena and applications of topological spintronics. Here, using a tight-binding model and first-principles calculations, we put forward that, in contrast to previously reported magnetic second-order topological insulators (SOTIs), robust SOTIs can emerge in two-dimensional ferromagnets regardless of magnetization directions. Remarkably, we identify intrinsic ferromagnetic 2H-RuCl2 and Janus VSSe monolayers as experimentally feasible candidates of predicted robust SOTIs with the emergence of nontrivial corner states along different magnetization directions. Moreover, under out-of-plane magnetization, we unexpectedly point out that the valley polarization of SOTIs can be huge and much larger than that of the known ferrovalley materials, opening up a technological avenue to bridge the valleytronics and higher-order topology with high possibility of innovative applications in topological spintronics and valleytronics.

The Effects of Adding Di-Tan Decoction (DTD) and/or Electroacupuncture (EA) to Standard Swallowing Rehabilitation Training (SRT) for Improving Poststroke Dysphagia (PSD): A Pilot, Single-Centred, Randomized Trial.

Objectives: To evaluate the effect of adding Di-tan decoction (DTD) and/or electroacupuncture (EA) to standard swallowing rehabilitation training (SRT) on improving PSD. Methods: In total, 80 PSD patients were enrolled and randomly assigned to the DTD, EA, DTD + EA or control group at a 1 : 1 : 1 : 1 ratio. All patients received basic treatment and standard SRT. The DTD group received DTD orally, the EA group received EA, the DTD + EA group received both DTD and EA simultaneously, and the control group received only basic treatment and standard SRT. The interventions lasted for 4 weeks. The outcome measurements included the Standardized Swallowing Assessment (SSA) and Swallowing-Quality of Life (SWAL-QOL), performed and scored from baseline to 2, 4, and 6 weeks after intervention, and the Videofluoroscopic Dysphagia Scale (VDS), scored at baseline and 4 weeks after intervention. Scores were compared over time by repeated-measures analysis of variance (ANOVA) among all groups. Interactions between interventions were explored using factorial design analysis. Results: (1) The effective rates (ERs) for PSD treatment were higher in the DTD, EA and DTD + EA groups than in the control group (all P < 0.05). The ER was higher in the DTD + EA group than in the DTD or EA group (both P < 0.05). (2) There were significant group effects, time effects and interactions for the SSA and SWAL-QOL scores (all P < 0.05). All groups showed decreasing trends in SSA scores and increasing trends in SWAL-QOL scores over time from baseline to 6 weeks after intervention (all P < 0.01). (3) Factorial design analysis for ΔVDS showed that there was a significant main effect for DTD intervention (F = 11.877, P < 0.01) and for EA intervention (F = 29.357, P < 0.01). However, there was no significant interaction effect between DTD and EA (F = 0.133, P = 0.717). Multiple comparisons showed that the DTD, EA and DTD + EA groups all had higher ΔVDS values than the control group (P < 0.05). The DTD + EA group had a higher ΔVDS than the DTD or EA group (both P < 0.05). (4) Most adverse reactions were mild and transient. Conclusions: Adding DTD or EA to SRT can better improve PSD than applying SRT alone. Adding DTD and EA simultaneously can accelerate and amplify the recovery of swallowing function versus DTD or EA alone, and both are effective and safe treatments, alone or jointly, for PSD and are a powerful supplement to routine treatments.

[Analysis of an ABO subtype with a novel variation].

OBJECTIVE: To analyze the molecular characteristics of a ABO subgroup. METHODS: The ABO phenotype was determined with the tube method. Exons of the ABO gene were analyzed by Sanger sequencing, and haplotypes of exons 6 and 7 were analyzed by cloning sequencing. RESULTS: By forward typing, the red blood cells showed 3+ agglutination reaction with anti-A and 4+ agglutination with anti-B. A weak reaction with A1 cells and no agglutination reaction with B, O cells by the reverse typing. Sequencing results showed heterozygosity including c.297A>G, c.467C>T, c.526C>G, c.608A>G, c.657C>T, c.703G>A, c.796C>A, c.803G>C, c.930G>A. Cloning sequencing revealed a c.608A>G variant in the A allele compared with the ABO*A1.02. CONCLUSION: A new variant site of subtype A of c.608G variation has been identified.

Interlayer spacing enlarged 2D 1T-MoS2 and V2CTx MXene as superior anodes for boosting potassium-ion diffusion coefficient.

Two-dimensional (2D) materials used in potassium ion batteries (PIBs) have high theoretical capacitance and excellent rate characteristics. However, the origin of low diffusion of potassium ions and poor storage kinetics still remain challenge mainly due to the large size of potassium ions (0.138 nm) and narrow 2D interlayer spacing. Herein, the V2CTx-based hybrids including 1T-MoS2 (1T -MoS2@V2CTx) has been successfully constructed by the magneto-hydrothermal method and proved to be an eminent anode, which can make PIBs have high reversible capacity and eminent rate performance at the same time. Moreover, the combination of 2D 1T-MoS2 and V2CTx not only significantly promotes the transfer of interfacial charges as well as accelerates the transmission and diffusion of electrons and K+, but also helps to alleviate the volume changes caused by the insertion/extraction of large-sized K+ during the cycle, which makes the electrode exhibit good cycle stability. Density functional theory (DFT) indicates that the synergy effect between 1T-MoS2 and V2CTx has significantly strengthened the potassium affinities and ion diffusion kinetics in the 1T-MoS2@V2CTx anode by reducing the ion diffusion energy barrier, thereby showing outstanding K+ storage performance, especially in 1T-MoS2@V2CF2. As a result, the 1T-MoS2@V2CTx anode shows a high reversible capacity of 887.3 mA h g-1 at 0.1 A g-1, eminent rate performance of the capacity maintaining 563.6 mA h g-1 at 2.0 A g-1 and remarkable cycle stability of 601.2/374.7 mA h g-1 with 69.4/56.5% capacity retention after 2000 cycles at 1.0/2.0 A g-1. This work provides a new way for the exquisite design of 2D composite electrodes with excellent performance in PIBs.

Botulinum toxin A injection using ultrasound combined with balloon guidance for the treatment of cricopharyngeal dysphagia: analysis of 21 cases.

BACKGROUND: As an upper oesophageal sphincter (UES) dysfunction disorder, cricopharyngeal achalasia (CPA) is a common cause of dysphagia and is associated with an increased risk of pulmonary complications. The aim of this study was to investigate the effectiveness and safety of BTX-A injection using ultrasound combined with balloon guidance for the treatment of CPA caused by stroke. METHODS: A total of 21 patients diagnosed with CPA were treated with BTX-A injection into the cricopharyngeal muscle using ultrasound combined with balloon guidance. Primary outcome measures, including the functional oral intake scale (FOIS), videofluoroscopic dysphagia scale (VDS) and penetration aspiration scale (PAS), which are quantitative measures for a video fluoroscopic swallowing study (VFSS), and scores of the self-rating anxiety scale (SAS) and self-rating depression scale (SDS) were assessed from baseline to 12 weeks after treatment. Repeated measures analysis of variance was used to compare the scores between time points. RESULTS: BTX-A injection led to improved dysphagia symptoms and scores in 19 patients (90.48%). Among them, 5 cases were cured (23.81%), 11 cases showed significant improvement (52.38%), and 3 cases showed improvement (14.29%). Two cases were absolutely ineffective (9.52%). Compared with the scores prior to treatment, the scores on the FOIS, VDS, PAS, SAS and SDS significantly improved beginning at 3 days (p < .05) and lasting for at least 12 weeks after injection. CONCLUSIONS: Ultrasound with balloon-guided BTX-A injection is probably a relatively safe, easy, and effective technique for the treatment of CPA caused by stroke, with better visualization of the injection procedure. A well-designed controlled trial with a larger sample size is needed for more convincing conclusions.

Rational design of Ti3C2Cl2 MXenes nanodots-interspersed MXene@NiAl-layered double hydroxides for enhanced pseudocapacitor storage.

Although electrodes based on two dimensional hybrids with interstratification-assemble have been widely studied for supercapacitors, the performance enhancement still remains challenge mainly due to the random dispersion of surface passivated two dimensional nanosheets. Herein, a new covalent surface functionalization of MXene-based Ti3C2Cl2 nanodots-interspersed MXene@NiAl-layered double hydroxides (QD-Ti3C2Cl2@NiAl-LDHs) hybrid electrode with superior pseudocapacitor storage performance has been elaborately designed by electrostatic-assembled. As a result, the QD-Ti3C2Cl2@NiAl-LDHs electrode exhibits a super specific capacitance of 2010.8F g-1 at 1.0 A g-1 and high energy density of 100.5 Wh kg-1 at a power density of 299.8 W kg-1. In addition, 94.1% capacitance retention is achieved after cycling for 10,000 cycles at 1.0 A g-1, outperforming previously reported of two dimensional hybrids electrode for supercapacitor. Furthermore, density functional theory (DFT) calculations show that the superior pseudocapacitor storage performance of the QD-Ti3C2Cl2@NiAl-LDHs may be attributed to the creation of numerous electrochemical active sites and the enhancement of electrical conductivity by the QD-Ti3C2Cl2 MXene. This work provides new strategy for developing excellent pseudocapacitor supercapacitor based on two dimensional hybrid electrode.

Full-length transcriptome of in Medicago sativa L. roots in response to drought stress.

Background: Alfalfa (Medicago sativa L.), serves as a legume with high drought tolerance, is a major forage crop with a high biomass of production. However, the molecular mechanism of Alfalfa in response to drought stress are still unclear. Results: We constructed the first full-length transcriptome for Alfalfa root. 21.53Gb clean data were obtained by further data filtering, in which incorporate 566,076 reads of Insert (ROI), and 409,291 full length reads non-Chimeric (FLNC) sequences. Combined with second-generation sequencing (SGS), there were 2615, 6011, and 4617 differentially expressed genes (DEGs) in three comparisons. KEGG pathway analysis showed enrichment of ribosome, glutathione metabolism, and biosynthesis of amino acids are among the DEGs. The majority of transcription factors (TFs) from DEGs were AP2/ERF-ERF (37), C2H2 (32), and bHLH (22) bZIP (22), followed by C3H (19), MYB (18), WRKY (18), GRAS (16), and NAC (15). 32 C2H2 genes were differentially expressed in three groups. In addition, TFs annotated as C3H (19), MYB (18), GRAS (16), and NAC (15) also changed significantly in expression in the three comparisons. We found 24 genes participate in the abscisic acid (ABA) and auxin hormone signaling pathway in response to drought stress, and monitored the expression patterns of these related genes. Conclusion: The present study enhanced our understanding of the genetic diversity and complexity, and provides greater insight into the fundamental transcriptome reprogramming of Alfalfa under drought.

Rational construction of hierarchical Co@C@NPC nanocomposites derived from bimetallic hybrid ZIFs/biomass for boosting the microwave absorption.

Nowadays, electromagnetic (EM) radiation poses severe environmental pollution and harm to civilian and military life. To this end, it is urgent to synthesize high-efficiency microwave absorbers in terms of composition and structural design. Herein, we reported a unique hybrid nanostructure with Co particles embedded in hollow carbon polyhedron by a series of synthetic steps including carbonization and pyrolysis. Further, the nanoporous carbon (NPC) derived from wheat flour is coated onto the surface of Co@C polyhedrons, forming a special hierarchical structure (Co@C@NPC), which demonstrates outstanding microwave absorption properties due to the hierarchical porous structure, enhanced interfacial polarization, conduction loss, multi-reflection and matched impedance. Typically, with a 10 wt% filler content, the maximum RL of Co@C@NPC reaches -57.2 dB at 9.6 GHz and the corresponding effective bandwidth is 5.7 GHz (from 7.5 to 13.2 GHz) with an absorber thickness of 3 mm. Besides, the filler loading of 10 wt% is much lower than other reported bio-derived absorbers. In short, the hybrid zeolitic imidazolate frameworks offer a novel idea for constructing hollow carbon skeletons and introducing biomass carbon as a green, low cost and renewable material that enhances the dielectric loss and the synergistic effect between permittivity and permeability.

Facile synthesis of the three-dimensional flower-like ZnFe2O4@MoS2 composite with heterogeneous interfaces as a high-efficiency absorber.

Lightweight and high-efficiency microwave absorbers are determined by structure and composition of materials. In this research, a novel core-shell ZnFe2O4@MoS2 composite with a flower-like heterostructure was synthesized successfully by a facile hydrothermal process. The unique 3D heterostructure (porous ZnFe2O4 and MoS2 nanosheets as core and outer shells, respectively) endows the synthesized sample with high-efficiency electromagnetic wave absorption performance. The exploration of microwave absorption properties reveals that the maximum reflection loss displayed by the ZnFe2O4@MoS2 composite is up to -61.8 dB at 9.5 GHz with a filler content of 20 wt%, and the corresponding effective bandwidth (RL exceeding -10 dB) achieves 5.8 GHz (from 7.2 to 13 GHz). The enhanced microwave absorption performance is benefitted by the porous core-shell structure, intense interfacial polarization, multiple reflections, matched impedance and favorable synergistic effect between ZnFe2O4 core and MoS2 shell. Consequently, this strategy provides inspiration for the design of novel microwave absorber with high-performance.