Metallothionein-1 mitigates the advancement of osteoarthritis by regulating Th17/Treg balance.

Osteoarthritis (OA) is a chronic inflammatory joint disorder characterized by cartilage degradation and bone remodeling. This study investigated the regulatory role of metallothionein 1 (MT1) in modulating immune responses and the balance between regulatory T cells (Treg) and T helper 17 cells (Th17) in OA. Peripheral blood mononuclear cells (PBMCs) from healthy individuals and OA patients were assessed for cytokine expression linked to Treg/Th17 homeostasis. OA was induced in wild-type (WT) and Mt1 knockout (MT1KO) mice via surgical destabilization of the medial meniscus. Clinical scores, pathological features, inflammatory cytokines, and Treg/Th17 balance were evaluated. MT1KO mice showed significantly elevated Mt1, pro-inflammatory cytokines (IL-1, IL-6, TNF-α) and exacerbated OA progression, characterized by increased knee joint diameter, inflammatory infiltration, and cartilage destruction. Mechanistically, disrupted Treg/Th17 balance played a pivotal role in OA exacerbation, with MT1KO promoting Th17 differentiation and reducing Treg populations. Additionally, the compensatory elevation of anti-inflammatory interleukin-10 (IL-10) in OA patients hinted at a nuanced immune regulatory mechanism. The study illuminates intricate interactions involving MT1, Treg/Th17 cells, and pro-inflammatory cytokines in OA pathogenesis, suggesting MT1's potential as a pivotal regulatory factor and a therapeutic target for mitigating immune dysregulation in OA.

Application of x-ray energy dispersive spectroscopy to analyzing the thickness of diamond-like carbon film deposited on the surface of microparticles.

Depositing diamond-like carbon (DLC) film is considered to be more promising for surface modification of microparticles. The development of reliable and precise measurement techniques for DLC coatings on microparticles is crucial for advancing research in this field. This paper introduces a methodological approach for quantifying the thickness of the film on microparticles. The thickness of the film is obtained by establishing the quantitative relationship between the energy lost when electrons pass through the film and the thickness of the film. The proposed method allows for the estimation of film thickness by assessing solely the elemental abundance on the particle surfaces.

Ultra-thin DLC diaphragm-based optical fiber sensor achieving a highly sensitive and broadband acoustic response.

In the design of an extrinsic Fabry-Perot interferometer (EFPI) acoustic sensor, broadband response and high-sensitivity sensing are usually conflicting and need to be carefully balanced. Here, we present a novel, to the best of our knowledge, optical fiber acoustic sensor based on an ultra-thin diamond-like carbon (DLC) film, fabricated using the plasma-enhanced chemical vapor deposition method, and transferred by a surface-energy-assisted method. The sensor exhibits a broadband response ranging from 200 Hz to 100 kHz, maintains an average sensitivity of 457.3 mV/Pa within the range of 6 to 30 kHz, and can detect weak acoustic signals down to 3.23 µPa/Hz1/2@16.19 kHz. The combination of an ultra-thin DLC film with a relatively high Young's modulus and internal stresses results in a trade-off between high sensitivity and a broadband response. This performance demonstrates that our sensor is among the most advanced in the EFPI acoustic sensor family, with significant potential for applications such as photoacoustic spectroscopy, defect diagnosis, and bio-imaging.

Cross-Modality Medical Image Segmentation via Enhanced Feature Alignment and Cross Pseudo Supervision Learning.

Given the diversity of medical images, traditional image segmentation models face the issue of domain shift. Unsupervised domain adaptation (UDA) methods have emerged as a pivotal strategy for cross modality analysis. These methods typically utilize generative adversarial networks (GANs) for both image-level and feature-level domain adaptation through the transformation and reconstruction of images, assuming the features between domains are well-aligned. However, this assumption falters with significant gaps between different medical image modalities, such as MRI and CT. These gaps hinder the effective training of segmentation networks with cross-modality images and can lead to misleading training guidance and instability. To address these challenges, this paper introduces a novel approach comprising a cross-modality feature alignment sub-network and a cross pseudo supervised dual-stream segmentation sub-network. These components work together to bridge domain discrepancies more effectively and ensure a stable training environment. The feature alignment sub-network is designed for the bidirectional alignment of features between the source and target domains, incorporating a self-attention module to aid in learning structurally consistent and relevant information. The segmentation sub-network leverages an enhanced cross-pseudo-supervised loss to harmonize the output of the two segmentation networks, assessing pseudo-distances between domains to improve the pseudo-label quality and thus enhancing the overall learning efficiency of the framework. This method's success is demonstrated by notable advancements in segmentation precision across target domains for abdomen and brain tasks.

Reduction of the exchangeable cadmium content in soil by appropriately increasing the maturity degree of organic fertilizers.

To enhance the remediation effect of heavy metal pollution, organic fertilizers with different maturity levels were added to cadmium-contaminated soil. The remediation effect was determined by evaluating the form transformation and bioavailability of cadmium in heavy metal-contaminated soil. -Results showed that when the maturity was 50%, although the soil humus (HS) content increased, it didn't contribute to reducing the bioavailability of soil Cd. Appropriately increasing the maturity (GI ≥ 80%), the HS increased by 113.95%∼157.96%, and reduced significantly the bioavailability of soil Cd, among the exchangeable Cd decreased by 16.04%∼33.51% (P < 0.01). The structural equation modeling (SEM) revealed that HS content is a critical factor influencing the transformation of Cd forms and the reduction of exchangeable Cd accumulation; the HS and residual Cd content were positively correlated with the maturity (P < 0.01), while exchangeable Cd content was negatively correlated with maturity (P < 0.01), and the correlation increased with increasing maturity. In summary, appropriately increasing the maturity (GI ≥ 80%) can increase significantly HS, promote the transformation of exchangeable Cd into residual Cd, and ultimately enhance the effectiveness of organic fertilizers in the remediation of soil Cd pollution. These results provide a new insight into the remediation of Cd-contaminated soil through organic fertilizer as soil amendment in Cd-contaminated soil.

In situ interfacial evaluation of aramid/epoxy composites by interfacial stress transfer characteristics.

Interfacial bonding between aramid fibers and epoxy resin is crucial for the mechanical properties of fiber-reinforced epoxy composites. Interfacial stress transfer between resin and fibers bridges microscopic and macroscopic properties. Using micro-Raman spectroscopy for in situ stress measurement offers insights into interface bonding through assessment of interfacial stress transfer characteristics. This study measures stress distribution on loaded microdroplet sample surfaces, analyzes stress transfer at the interface, and proposes an evaluation method using finite element analysis (FEA). The results show that interfacial stress along the fiber decreases from the droplet's edge to center, indicating stress transfer between the fiber and matrix, as evidenced by the stress-dependent Raman shift of aramid fiber. The interface modulus (Eif), derived from the FEA model, effectively reflects interface bonding, with droplet shape influence removed in evaluations. The agreement between the proposed method and the transverse fiber bundle test confirms its applicability. The method offers a direct, non-destructive, and shape-independent way to evaluate the interface of aramid/epoxy composites.

Clinical application of ctDNA in early diagnosis, treatment and prognosis of patients with non-small cell lung cancer.

Lung cancer is one of the most common malignancies worldwide, with non-small cell lung cancer (NSCLC) being the most common type. As understanding of precise treatment options for NSCLC deepens, circulating tumor DNA (ctDNA) has emerged as a potential biomarker that has become a research hotspot and may represent a new approach for the individualized diagnosis and treatment of NSCLC. This article reviews the applications of ctDNA for the early screening of patients with NSCLC, guiding targeted therapy and immunotherapy, evaluating chemotherapy and postoperative efficacy, assessing prognosis and monitoring recurrence. With the in-depth study of the pathogenesis of NSCLC, plasma ctDNA may become an indispensable part of the precise treatment of NSCLC, which has great clinical application prospects.

[Box: see text].

Reducing aerosol and ammonia emission in post-combustion CO2 capture: Additives as key solutions.

Advancement of the absorbent for CO2 capture is essential in optimizing the performance and reducing the negative environmental effects associated with this technology. Despite ammonia's promise as an absorbent, the volatility limits its practical application and creates potential environmental pollution. Therein, we assess various additives (amino acids, carbonates, and alkanolamines) for ammonia-based solvents using multi-stage circulation absorber from the viewpoints of aerosol emission, ammonia emission, and CO2 capture efficiency. Experimental findings reveal that ammonia volatilization can be inhibited by the protonation of free ammonia by carboxyl groups and the formation of hydrogen bonding between amino/hydroxyl groups and ammonia, with ammonia emission reduced by 21.7 %, aerosol emission reduced by 26.5 %, and CO2 capture efficiency increased to a maximum of 87.8 % under the condition of adding histidine. Moreover, the experiment highlights a positive correlation between total ammonia emission and aerosol concentration/diameter. Additionally, tests combining source abatement with water wash exhibit up to 50.5 % aerosol removal efficiency and up to 76.6 % ammonia removal efficiency. To further mitigate emissions, a comprehensive approach is proposed, achieving an 84.4 % reduction in ammonia emission and a 61.9 % reduction in aerosol emission. Finally, a method for recycling ammonia for desulfurization is suggested.

Unveiling kiwifruit TCP genes: evolution, functions, and expression insights.

The TEOSINTE-BRANCHED1/CYCLOIDEA/PROLEFERATING-CELL-FACTORS (TCP) gene family is a plant-specific transcriptional factor family involved in leaf morphogenesis and senescence, lateral branching, hormone crosstalk, and stress responses. To date, a systematic study on the identification and characterization of the TCP gene family in kiwifruit has not been reported. Additionally, the function of kiwifruit TCPs in regulating kiwifruit responses to the ethylene treatment and bacterial canker disease pathogen (Pseudomonas syringae pv. actinidiae, Psa) has not been investigated. Here, we identified 40 and 26 TCP genes in Actinidia chinensis (Ac) and A. eriantha (Ae) genomes, respectively. The synteny analysis of AcTCPs illustrated that whole-genome duplication accounted for the expansion of the TCP family in Ac. Phylogenetic, conserved domain, and selection pressure analysis indicated that TCP family genes in Ac and Ae had undergone different evolutionary patterns after whole-genome duplication (WGD) events, causing differences in TCP gene number and distribution. Our results also suggested that protein structure and cis-element architecture in promoter regions of TCP genes have driven the function divergence of duplicated gene pairs. Three and four AcTCP genes significantly affected kiwifruit responses to the ethylene treatment and Psa invasion, respectively. Our results provided insight into general characters, evolutionary patterns, and functional diversity of kiwifruit TCPs.

Highly efficient removal of Sr2+ from aqueous solutions using a polyacrylic acid/crown-ether/graphene oxide hydrogel composite.

With the development of nuclear power, efficiently treating nuclear wastes generated during operation has attracted extensive attention. Hydrogels are common adsorbent materials in the treatment of wastewater due to their high swelling rate and easy post-treatment. In this work, a novel polyacrylic acid/crown-ether/graphene oxide (PAA/DB18C6/GO) hydrogel composite was synthesized by a radical cross-linking copolymerization method and characterized using various analytical tools such as SEM, FT-IR, TGA and XPS. The effects of time, pH, initial Sr2+ concentration, and temperature on Sr2+ adsorption onto the PAA/DB18C6/GO were studied. The PAA/DB18C6/GO shows a high adsorption capacity of 379.35 mg g-1 at an initial Sr2+ concentration of 772 mg L-1 due to the unique structure of dibenzo-18-crown-ether-6 and high swelling. The composite has a high selectivity for Sr2+ with a removal rate of 82.4% when concentrations of Na+ and K+ were 10 times higher than that of Sr2+. The pH and temperature have no apparent impact on adsorption performance of the PAA/DB18C6/GO under the experimental conditions. The composite shows excellent reusability with more than 92% removal rate for Sr2+ after five continuous cycles. In addition, the mechanism of Sr2+ adsorption by PAA/DB18C6/GO was analyzed by fitting the adsorption data to the theoretical models and XPS data.

Performance analysis of urine formed element analyzer EH-2090 was found to have good accuracy in detecting RBCs and WBCs when compared to manual microscopic.

Background: EH-2090 is Mindray's new-generation fully automatic urine formed element analyzer (hereinafter referred to as EH-2090). Currently, there are no studies on EH-2090, so we evaluated the analytical and clinical performance of this instrument to verify that it can meet daily clinical needs, and used manual microscopy as a reference method. Methods: The analytical performance of the EH-2090 was first evaluated for repeatability, linearity, reproducibility, and carryover. We collected urine samples from outpatient and inpatient departments of Peking University Shenzhen Hospital. Uncentrifuged urine was compared with the EH-2090 using the Fuchs-Rosenthal counting method-a quantitative reference method for microscopy-for comparative studies in terms of red blood cell (RBC) and white blood cell (WBC) counting accuracy. Passing-Bablok regression analysis was performed for RBC and WBC counts. Two laboratory technicians performed centrifugation and manual analysis (microscopy) to evaluate its performance at detecting RBCs, WBCs, and casts, sensitivities and specificities were calculated. Results: The EH-2090's between-run reproducibility, within-day reproducibility, between-day reproducibility, and within-laboratory reproducibility for formed components of urine all met the laboratory requirements. There was a good correlation between the counting accuracy of RBCs (r=0.965, P<0.0001) and WBCs (r=0.894, P<0.0001) by the EH-2090 and the Fuchs-Rosenthal method. The positive coincidence rates of RBC and manual microscopy were 86.08% and 92.41%, respectively, and the negative coincidence rates were 88.39% and 85.81%, respectively. The positive coincidence rates before and after the WBC review were 89.33% and 92.00%, respectively, whereas the negative ones were 77.64% and 83.23%, respectively. The positive coincidence rates before and after cast review were 77.78% and 82.05%, respectively, and the negative ones were 97.09% and 93.60%, respectively. Conclusions: The EH-2090 has good analytical and clinical performance. Its RBC and WBC counting accuracy correlates well with the quantitative reference method of microscopy.

Effects of different roasting temperatures on rabbit meat protein oxidation and fluorescent carbon nanoparticle formation.

This study explores the oxidation of rabbit meat proteins and the physicochemical properties of the resulting fluorescent carbon nanoparticles (CNPs) under various roasting temperatures (180, 210, 240, 270, and 300 °C). The determination of sulfhydryl content, along with the results from UV and fluorescence spectroscopy, indicates that the protein structure undergoes changes during the roasting process, and the degree of oxidation shows an increasing trend with rising roasting temperatures. The CNP solution obtained exhibits a typical blue fluorescence. Moreover, as the roasting temperature increases from 180 °C to 300 °C, the relative content of the three elements in CNPs, namely C, N, and O, increases by 12 %, -3%, and -9 %, respectively. The surface of the obtained rabbit meat CNPs contains hydrophilic and polycyclic groups, such as carbonyl, hydroxyl, and amide bonds. Correlation analysis reveals a significant positive correlation between the degree of protein oxidation and the fluorescence intensities of CNPs.

Rapid Spheroidization Process of S Phase (Al2CuMg) in the As-Cast 2024 Al Alloy Induced by High-Energy Electropulsing.

The effect of electropulsing treatment (EPT) on the microstructure of the as-cast 2024 Al alloy at room temperature was investigated. The results show that EPT remarkably accelerated the spheroidizing of second phase (S phase) in the as-cast 2024 Al alloy. The mechanism for rapid spheroidizing of the second phase was proposed based on not only the accelerated dissolution, but also the growth of particles. The morphology and size of the secondary phase could be controlled by changing the cooling speed of the specimen after EPT. Furthermore, the dissolving process of the randomly distributed S phase was recognized as the combination effect of the two basic dissolving ways. Hence, the EPT can be applied to improve the microstructure and properties of the alloys.

Comprehensive Time-Course Transcriptome Reveals the Crucial Biological Pathways Involved in the Seasonal Branch Growth in Siberian Elm (Ulmus pumila).

Timber, the most prevalent organic material on this planet, is the result of a secondary xylem emerging from vascular cambium. Yet, the intricate processes governing its seasonal generation are largely a mystery. To better understand the cyclic growth of vascular tissues in elm, we undertook an extensive study examining the anatomy, physiology, and genetic expressions in Ulmus pumila. We chose three robust 15-year-old elm trees for our study. The cultivars used in this study were collected from the Inner Mongolia Autonomous Region in China and nurtured in the tree farm of Shandong Normal University. Monthly samples of 2-year-old elm branches were taken from the tree from February to September. Marked seasonal shifts in elm branch vascular tissues were observed by phenotypic observation: In February, the cambium of the branch emerged from dormancy, spurring growth. By May, elms began generating secondary xylem, or latewood, recognized by its tiny pores and dense cell structure. From June to August, there was a marked increase in the thickness of the secondary xylem. Transcriptome sequencing provides a potential molecular mechanism for the thickening of elm branches and their response to stress. In February, the tree enhanced its genetic responses to cold and drought stress. The amplified expression of CDKB, CYCB, WOX4, and ARF5 in the months of February and March reinforced their essential role in the development of the vascular cambium in elm. Starting in May, the elm deployed carbohydrates as a carbon resource to synthesize the abundant cellulose and lignin necessary for the formation of the secondary wall. Major genes participating in cellulose (SUC and CESA homologs), xylan (UGD, UXS, IRX9, IRX10, and IRX14), and lignin (PAL, C4H, 4CL, HCT, C3H, COMT, and CAD) biosynthetic pathways for secondary wall formation were up-regulated by May or/and June. In conclusion, our findings provided a foundation for an in-depth exploration of the molecular processes dictating the seasonal growth of elm timber.

Endogenous miRNA and K+ Co-Activated Dynamic Assembly of DNA Coacervates for Intracellular miRNA Imaging and Mitochondrial Intervention.

Intracellular dynamic assembly of DNA structures may be beneficial for the development of multifunctional nanoplatforms for the regulation of cell behaviors, providing new strategies for disease diagnosis and intervention. Herein, we propose the dynamic assembly of DNA coacervates in living cells triggered by miRNA-21 and K+, which can be used for both miRNA imaging and mitochondrial intervention. The rationale is that miRNA-21 can trigger the hybridization chain reaction to generate G-quadruplex precursors, and K+ can mediate the assembly of G-quadruplex-based coacervates, allowing the colorimetric detection of miRNA-21 ranging from 10 pM to 10 µM. Moreover, the as-formed DNA coacervates can specifically target mitochondria in MCF-7 breast cancer cells using the MCF-7 cell membrane as delivery carriers, which further act as an anionic shielding to inhibit communication between mitochondria and environments, with a significant inhibitory effect on ATP production and cellular migration behaviors. This work provides an ideal multifunctional nanoplatform for rationally interfering with cellular metabolism and migration behaviors through the dynamic assembly of DNA coacervates mediated by endogenous molecules, which has a large number of potential applications in the biomedical field, especially theranostics for cancer metastasis.

High-rate partial nitritation as a pretreatment of anammox process.

In this study, a laboratory-scale partial nitrification reactor (PN reactor) was used to treat high-ammonia-nitrogen wastewater, by changing the influent NH4+-N conversion rate as the main operating strategy, to investigate the upper limit of its NH4+-N conversion rate (ACR) and explore its feasibility as an anammox pre-process. During the experiment, PN reactor was successfully activated in only 10 days. The PN reactor reached the highest ACR value of approximately 10.24 kg N/(m3 · day) when the influent ACR was 16.57 kg N/(m3 · day), and the ammonia conversion efficiency (ACE) was 61.78% at this time. The ratio of [NO2--N]Eff/[NH4+-N]Eff was approximately 1.37 which was close to the theoretical ratio of 1.32. And feasibility exploration experiment proved that it was feasible to use this PN reactor as a pre-process of anammox. The PCR-DGGE results showed that the dominant phylum and genus in the reactor during the ACR experiment were Proteobacteria and Nitrosomonas, respectively. With the increase in the ACR, the relative concentration of Nitrosomonas sp. G1 increased from 15 to 40%. This indicates that its abundance is directly correlated with the increase in the ACR. High-throughput sequencing showed that increasing the ACR of the PN reactor greatly reduced the diversity and abundance of the system microbial community structure and changed the dominant phylum and genus; however, the stability of the system was not disrupted. High-throughput sequencing experiments showed that the abundance value of nitrosation enzymes accounted for 91.62%, which was positively correlated with the expression of nitrification genes in the genus Nitrosomonas.

[Current research status and application prospect of numerical simulation in traditional Chinese medicine drying].

With the rapid development of computer technology, numerical simulation has gradually become an important method to study drying process and improve drying equipment. Using computer to simulate the drying process of traditional Chinese medicine(TCM) is characterized by intuitiveness, scientificity, and low cost, which serves as an auxiliary means for technical innovation in TCM drying. This paper summarizes the theories of different drying methods and the research status of numerical simulation in drying, introduces the modeling methods and software of numerical simulation, and expounds the significance of numerical simulation modeling in shortening the research and development cycle, improving drying equipment, and optimizing drying parameters. However, the current numerical simulation method for drying process has problems, such as low accuracy, lack of quantitative indicators for the control of simulation results on the process, and insufficient in-depth research on the mechanism of drug quality changes. Furthermore, this paper put forward the application prospect of numerical simulation in TCM drying, providing reference for the further study of numerical simulation in this field.

Probing the mechanism of interaction between capsaicin and myofibrillar proteins through multispectral, molecular docking, and molecular dynamics simulation methods.

The interaction between myofibrillar proteins (MPs) and capsaicin (CAP) was investigated using multispectral, molecular docking, and molecular dynamics simulation methods. The resulting complex increased the hydrophobicity of the tryptophan and tyrosine microenvironment as revealed by fluorescence spectral analysis. The fluorescence burst mechanism study indicated that the fluorescence burst of CAP on the MPs was a static one (Kq = 1.386 × 1012 m-1s-1) and that CAP could bind with MPs well (Ka = 3.31 × 104 L/mol, n = 1.09). The analysis of circular dichroism demonstrated that the interaction between CAP and MPs caused a decrease in the α-helical structure of MPs. The complexes formed exhibited lower particle size and higher absolute ζ potential. Furthermore, hydrogen bonding, van der Waals forces, and hydrophobic interactions were found to be the primary factors facilitating the interaction between CAP and MPs, as suggested by molecular docking models and molecular dynamics simulations.

Reducing Aerosol Emissions by Decoupled Parameter Management during the CO2 Capture Process in a Multi-stage Circulation Absorber.

Aerosol emissions from the CO2 capture process have a significant impact in terms of solvent loss and environmental pollution. Here, we propose a novel approach with multi-stage circulation for CO2 capture and synergistic aerosol reduction, which divides the absorption section into three circulation stages and reduces aerosol emissions through decoupled operation of the three absorption sections and the management of solvent CO2 loadings. Experimental results show that with the decoupled management of the liquid-gas ratio and solvent temperature in absorption sections, the aerosol mass concentration at the outlet of the 3rd absorption section can be reduced by 25.6% to a minimum of 349.7 mg/m3 at a liquid-gas ratio of 43.2 L/m3 and a solvent temperature of 303 K. Furthermore, aerosol removal is performed by setting up a water wash section after the absorption section. The aerosol mass concentration at the outlet of the absorber is reduced to 168.6 mg/m3 with the regulation of the wash water temperature and flow rate. In addition, improvements are proposed for the combination of the utilization of recovered solvents and the co-removal of SO2. This study provides innovative insights into the design of the CO2 capture system and the reduction of aerosol emissions, which are of great significance for the mitigation of global warming and the control of environmental pollution.

Interferon lambda modulates proinflammatory cytokines production in PBMCs from patients with chronic kidney disease.

BACKGROUND: CKD is a major cause of morbidity and mortality worldwide. Considerable evidence now indicates that renal inflammation plays a central role in the initiation and progression of CKD. Recent investigations have demonstrated that IFNλ plays an important role in the pathogenesis of autoimmune and inflammatory diseases. However, the association of IFNλ with CKD is still poorly understood. OBJECTIVE: To analyze the correlation between IFNλ levels and pro-inflammatory cytokines, and to investigate the effect of IFNλ on PBMCs in patients with CKD. METHODS: PBMCs were harvested from patients with CKD and healthy controls for measuring the expression level of inflammatory cytokines by RT-qPCR. Spearman correlation test was used to analyze correlation between IFNλ and cytokines as well as eGFR. PBMCs from healthy individuals and CKD patients were subjected to IFNλ protein stimulation. IL6, TNFα, IL10, ISG15 and MX1 mRNA level were measured by RT-PCR, STAT1 and phosphorylated STAT1 protein level were measured by Western blot. RESULTS: Patients with CKD showed higher levels of IFNλ in PBMCs compared to healthy controls. IFNλ mRNA levels were associated with cytokines and eGFR. The transcription of IL6, TNFα, and IL10 was significantly increased in healthy human PBMCs after IFNλ stimulation. In addition, IFNλ acts on PBMCs by p-STAT1 and ISG15 as well as MX1. CONCLUSION: High expression of IFNλ was found in CKD patients and was associated with eGFR and disease-related cytokines. More importantly, IFNλ promoted the expression of pro-inflammatory cytokines in PBMCs, suggesting a potential pro-inflammatory role of IFNλ in CKD.