Engineering Tough Supramolecular Hydrogels with Structured Micropillars for Tunable Wetting and Adhesion Properties.

Soft-lithography is widely used to fabricate microstructured surfaces on plastics and elastomers for designable physical properties such as wetting and adhesions. However, it remains a big challenge to construct high-aspect-ratio microstructures on the surface of hydrogels due to the difficulty in demolding from the gel with low strength and stiffness. Demonstrated here is the engineering of tough hydrogels by soft-lithography to form well-defined micropillars. The mechanical properties of poly(acrylamide-co-methacrylic acid) hydrogels with dense hydrogen-bond associations severely depend on temperature, with Young's modulus increasing from 8.1 MPa at 15 °C to 821.8 MPa at -30 °C, enabling easy demolding at low temperatures. Arrays of micropillars are maintained on the surface of the gel, and can be used at room temperature when the gel restores soft and stretchable. The hydrogel also exhibits good shape-memory property, favoring tailoring the morphology with a switchable tilt angle of micropillars. Consequently, the hydrogel shows tunable wetting and adhesion properties, as manifested by varying contact angles and adhesion strengths. These surface properties can also be tuned by geometry and arrangement of micropillars. This facile strategy by harnessing tunable viscoelasticity of supramolecular hydrogels should be applicable to other soft materials, and broaden their applications in biomedical and engineering fields.

Reversible Snapping of Constrained Anisotropic Hydrogels Upon Light Stimulations.

Creatures, such as Venus flytrap and hummingbirds, capable of rapid predation through snap-through transition, provide paradigms for the design of soft actuators and robots with fast actions. However, these artificial "snappers" usually need contact stimulations to trigger the flipping. Reported here is a constrained anisotropic poly(N-isopropylacrylamide) hydrogel showing fast snapping upon light stimulation. This hydrogel is prepared by flow-induced orientation of nanosheets (NSs) within a rectangular tube. The precursor containing gold nanoparticles is immediately exposed to UV light for photopolymerization to fix the ordered structure of NSs. Two ends of the slender gel are clamped to form a buckle with bistability nature, which snaps to the other side upon laser irradiation. Systematic experiments are conducted to investigate the influences of power intensity and irradiation angle of the laser, as well as thickness and buckle height of the gel, on the snapping behaviors. The fast snapping is further used to kick a plastic bead and control the switch state. Furthermore, synergetic or oscillated snapping of the gel with two buckles of opposite directions is realized by inclined irradiation of a laser or horizontal irradiation with two lasers, respectively. Such light-steered snapping of hydrogels should merit designing soft robots, energy harvests, etc.

Closed Twisted Hydrogel Ribbons with Self-Sustained Motions under Static Light Irradiation.

Self-sustained motions are widespread in biological systems by harvesting energy from surrounding environments, which inspire scientists to develop autonomous soft robots. However, most-existing soft robots require dynamic heterogeneous stimuli or complex fabrication with different components. Recently, control of topological geometry has been promising to afford soft robots with physical intelligence and thus life-like motions. Reported here are a series of closed twisted ribbon robots, which exhibit self-sustained flipping and rotation under constant light irradiation. Both Möbius strip and Seifert ribbon robots are devised for the first time by using an identical hydrogel, which responds to light irradiation on either side. Experiment and simulation results indicate that the self-regulated motions of the hydrogel robots are related to fast and reversible response of muscle-like gel, self-shadowing effect, and topology-facilitated refresh of light-exposed regions. The motion speeds and directions of the hydrogel robots can be tuned over a wide range. These closed twisted ribbon hydrogels are further applied to execute specific tasks in aqueous environments, such as collecting plastic balls, climbing a vertical rod, and transporting objects. This work presents new design principle for autonomous hydrogel robots by benefiting from material response and topology geometry, which may be inspirative for the robotics community.

Photo-steered rapid and multimodal locomotion of 3D-printed tough hydrogel robots.

Hydrogels are an ideal material to develop soft robots. However, it remains a grand challenge to develop miniaturized hydrogel robots with mechanical robustness, rapid actuation, and multi-gait motions. Reported here is a facile strategy to fabricate hydrogel-based soft robots by three-dimensional (3D) printing of responsive and nonresponsive tough gels for programmed morphing and locomotion upon stimulations. Highly viscoelastic poly(acrylic acid-co-acrylamide) and poly(acrylic acid-co-N-isopropyl acrylamide) aqueous solutions, as well as their mixtures, are printed with multiple nozzles into 3D constructs followed by incubation in a solution of zirconium ions to form robust carboxyl-Zr4+ coordination complexes, to produce tough metallo-supramolecular hydrogel fibers. Gold nanorods are incorporated into ink to afford printed gels with response to light. Owing to the mechanical excellence and small diameter of gel fibers, the printed hydrogel robots exhibit high robustness, fast response, and agile motions when remotely steered by dynamic light. The design of printed constructs and steering with spatiotemporal light allow for multimodal motions with programmable trajectories of the gel robots. The hydrogel robots can walk, turn, flip, and transport cargos upon light stimulations. Such printed hydrogels with good mechanical performances, fast response, and agile locomotion may open opportunities for soft robots in biomedical and engineering fields.

Animating hydrogel knotbots with topology-invoked self-regulation.

Steering soft robots in a self-regulated manner remains a grand challenge, which often requires continuous symmetry breaking and recovery steps for persistent motion. Although structural morphology is found significant for robotic functions, geometric topology has rarely been considered and appreciated. Here we demonstrate a series of knotbots, namely hydrogel-based robots with knotted structures, capable of autonomous rolling and spinning/rotating motions. With symmetry broken by external stimuli and restored by self-regulation, the coupling between self-constraint-induced prestress and photothermal strain animates the knotbots continuously. Experiments and simulations reveal that nonequilibrium processes are regulated dynamically and cooperatively by self-constraints, active deformations, and self-shadowing effect of the photo-responsive gel. The active motions enable the knotbots to execute tasks including gear rotation and rod climbing. This work paves the way to devise advanced soft robots with self-regulated sustainable motions by harnessing the topology.

Ultra-stretchable and conductive polyacrylamide/carboxymethyl chitosan composite hydrogels with low modulus and fast self-recoverability as flexible strain sensors.

There is a great demand for the fabrication of soft electronics using hydrogels due to their biomimetic structures and good flexibility. However, conventional hydrogels have poor mechanical properties, which restricts their applications as stretchable sensors. Herein, a facile one-step strategy is proposed to fabricate tough and conductive hydrogels by making use of the graftability of carboxymethyl chitosan without extra conductive matter and crosslinking agent. The obtained polyacrylamide/carboxymethyl chitosan composite hydrogels possess outstanding transmittance and excellent mechanical performances, with tensile breaking stress of 630 kPa, breaking strain of 4560 %, toughness of 8490 kJ/m3. These hydrogels have low modulus of 5-20 kPa, fast recoverability after unloading, high conductivity of ∼0.85 S/m without the addition of other conductive substances and good biocompatibility. The ionic conductivity of the gels originates from the counterions of carboxymethyl chitosan, affording the hydrogels as resistive-type sensors. The resultant hydrogel sensors demonstrate a broad strain window (0.12-1500 %), excellent linear response, high sensitivity with the gauge factor reaching 11.72, and great durability, capable of monitoring diverse human motions. This work provides a new strategy to develop stretchable conductive hydrogels with promising applications in the fields of artificial intelligence and flexible electronics.

Toughening Hydrogels by Forming Robust Hydrazide-Transition Metal Coordination Complexes.

Energy dissipation based on dynamic fracture of metal ligands is an effective way to toughen hydrogels for specific applications in biomedical and engineering fields. Exploration of new kinds of metal-ligand coordinates with robust bonding strength is crucial for the facile synthesis of tough gels. Here a hydrogel toughening strategy based on the formation of robust coordination complexes between the hydrazide ligands and zinc ions is reported. The resultant hydrogels exhibit high strength and toughness at room temperature. Their mechanical properties show temperature dependence due to the dynamic nature of coordination bonds. In addition, the amine group of hydrazides in the gel matrix provides a reactive site for Schiff's base reaction, enabling surface modification without influence on overall mechanical performances of the gel. The hydrazide ligands are easy to synthesize and can coordinate very well with several transition metals. Such a metal-ligand coordination should be suitable to develop tough soft materials with versatile applications.

An EMT-based gene signature enhances the clinical understanding and prognostic prediction of patients with ovarian cancers.

BACKGROUND: Ovarian cancer (OC) is one of the most common gynecological cancers with malignant metastasis and poor prognosis. Current evidence substantiates that epithelial-mesenchymal transition (EMT) is a critical mechanism that drives OC progression. In this study, we aspire to identify pivotal EMT-related genes (EMTG) in OC development, and establish an EMT gene-based model for prognosis prediction. METHODS: We constructed the risk score model by screening EMT genes via univariate/LASSO/step multivariate Cox regressions in the OC cohort from TCGA database. The efficacy of the EMTG model was tested in external GEO cohort, and quantified by the nomogram. Moreover, the immune infiltration and chemotherapy sensitivity were analyzed in different risk score groups. RESULTS: We established a 11-EMTGs risk score model to predict the prognosis of OC patients. Based on the model, OC patients were split into high- and low- risk score groups, and the high-risk score group had an inevitably poor survival. The predictive power of the model was verified by external OC cohort. The nomogram showed that the model was an independent factor for prognosis prediction. Moreover, immune infiltration analysis revealed the immunosuppressive microenvironment in the high-risk score group. Finally, the EMTG model can be used to predict the sensitivity to chemotherapy drugs. CONCLUSIONS: This study demonstrated that EMTG model was a powerful tool for prognostic prediction of OC patients. Our work not only provide a novel insight into the etiology of OC tumorigenesis, but also can be used in the clinical decisions on OC treatment.

Intrinsic Anti-Freezing and Unique Phosphorescence of Glassy Hydrogels with Ultrahigh Stiffness and Toughness at Low Temperatures.

Most hydrogels become frozen at subzero temperatures, leading to degraded properties and limited applications. Cryoprotectants are massively employed to improve anti-freezing property of hydrogels; however, there are accompanied disadvantages, such as varied networks, reduced mechanical properties, and the risk of cryoprotectant leakage in aqueous conditions. Reported here is the glassy hydrogel having intrinsic anti-freezing capacity and excellent optical and mechanical properties at ultra-low temperatures. Supramolecular hydrogel of poly(acrylamide-co-methacrylic acid) with moderate water content (≈50 wt.%) and dense hydrogen-bond associations is in a glassy state at room temperature. Since hydrogen bonds become strengthened as the temperature decreases, this gel becomes stronger and stiffer, yet still ductile, with Young's modulus of 900 MPa, tensile strength of 30 MPa, and breaking strain of 35% at -45 °C. This gel retains high transparency even in liquid nitrogen. It also exhibits unique phosphorescence due to presence of carbonyl clusters, which is further enhanced at subzero temperatures. Further investigations elucidate that the intrinsic anti-freezing property is related to a fact that most water molecules are tightly bound and confined in the glassy matrix and become non-freezable. This correlation, as validated in several systems, provides a roadmap to develop intrinsic anti-freezing hydrogels for widespread applications at extreme conditions.

Polymerization-Induced Crystallization of Dopant Molecules: An Efficient Strategy for Room-Temperature Phosphorescence of Hydrogels.

Conventional hydrogels such as polyacrylamide and polyacrylic acid ones seldom exhibit phosphorescences at ambient conditions, which limit their applications as optical materials. We propose and demonstrate here a facile strategy to afford these hydrogels with room-temperature phosphorescence by polymerization-induced crystallization of dopant molecules that results in segregation and confinement of the gel matrix with carbonyl groups and thus clusterization-induced phosphorescence. As a model system, crown ethers (CEs) are dissolved in an aqueous solution of concentrated acrylamide that greatly increases the solubility of CEs. During the polymerization process, CEs crystallize to form large spherulites in the polyacrylamide hydrogel. The crystallization arises from the drastically reduced solubility of CEs after the conversion of monomers to polymers during the gel synthesis. The resultant composite hydrogel with a water content of 67 wt % exhibits extraordinary phosphorescence behavior yet maintains good stretchability and resilience. We found that the partial gel matrix is squeezed and confined by in situ-formed crystals, leading to carbonyl clusters and thus phosphorescence emission. The composite gel shows green phosphorescence with an emission peak at 512 nm and a lifetime of 342 ms. The afterglow emission is detectable by the naked eye for several seconds. This strategy has good universality, as validated in other hydrogels with different polymeric matrices and dopant molecules. The development of hydrogels with good mechanical and phosphorescent properties should merit the design of multifunctional soft machines with applications in biomedical and engineering fields.

Engineering viscoelastic mismatch for temporal morphing of tough supramolecular hydrogels.

Viscoelasticity is a generic characteristic of soft biotissues and polymeric materials, endowing them with unique time- and rate-dependent properties. Here, by spatiotemporally tailoring the viscoelasticity in tough supramolecular hydrogels, we demonstrate reprogrammable morphing of the gels based on differential viscoelastic recovery processes that lead to internal strain mismatch. The spatial heterogeneity of viscoelasticity is encoded through integrating dissimilar hydrogels or by site-specific treatment of a singular hydrogel. The temporal morphing behavior of tough gels, including a fast deformation process and then a slow shape-recovery process, is related to the kinetics of associative interactions and the entropic elasticity of supramolecular networks after pre-stretching and release, which takes place spontaneously in the absence of external stimuli. Such a kinetically driven morphing mechanism resolves the trade-off between the mechanical robustness and shape-changing speed in tough hydrogels with dense entanglements and physical associations, and should be applicable to other viscoelastic materials. A numerical theory for the temporal morphing of tough supramolecular gels has been formulated by dynamic coupling of viscoelastic recovery and mechanics of deformations, which is further implemented to predict the sophisticated morphed structures. Furthermore, magnetic particles are incorporated into the morphed tough hydrogels to devise versatile soft actuators and robots for specific applications.

Bistable Joints Enable the Morphing of Hydrogel Sheets with Multistable Configurations.

Joints, as a flexing element to connect different parts, are widespread in natural systems. Various joints exist in the body and play crucial roles to execute gestures and gaits. These scenarios have inspired the design of mechanical joints with passive, hard materials, which usually need an external power supply to drive the transformations. The incorporation of soft and active joints provides a modular strategy to devise soft actuators and robots. However, transformations of responsive joints under external stimuli are usually in uni-mode with a pre-determined direction. Here, hydrogel joints capable of folding and twisting transformation in bi-mode are reported, which enable the composite hydrogel to form multiple configurations under constant conditions. These joints have an in-plane gradient structure and comprise stiff, passive gel as the frame and soft, active gel as the actuating unit. Under external stimuli, the response mismatch between different gels leads to out-of-plane folding or twisting deformation with the feature of bistability. These joints can be modularly integrated with other gels to afford complex deformations and multistable configurations. This approach favors selective control of hydrogel's architectures and versatile design of hydrogel devices, as demonstrated by proof-of-concept examples. It shall also merit the development of metamaterials, soft actuators, and robots, etc.

Manta Ray Inspired Soft Robot Fish with Tough Hydrogels as Structural Elements.

The design of soft robots capable of navigation underwater has received tremendous research interest due to the robots' versatile applications in marine explorations. Inspired by marine animals such as jellyfish, scientists have developed various soft robotic fishes by using elastomers as the major material. However, elastomers have a hydrophobic network without embedded water, which is different from the gel-state body of the prototypes and results in high contrast to the surrounding environment and thus poor acoustic stealth. Here, we demonstrate a manta ray-inspired soft robot fish with tailored swimming motions by using tough and stiff hydrogels as the structural elements, as well as a dielectric elastomer as the actuating unit. The switching between actuated and relaxed states of this unit under wired power leads to the flapping of the pectoral fins and swimming of the gel fish. This robot fish has good stability and swims with a fast speed (∼10 cm/s) in freshwater and seawater over a wide temperature range (4-50 °C). The high water content (i.e., ∼70 wt %) of the robot fish affords good optical and acoustic stealth properties under water. The excellent mechanical properties of the gels also enable easy integration of other functional units/systems with the robot fish. As proof-of-concept examples, a temperature sensing system and a soft gripper are assembled, allowing the robot fish to monitor the local temperature, raise warning signals by lighting, and grab and transport an object on demand. Such a robot fish should find applications in environmental detection and execution tasks under water. This work should also be informative for the design of other soft actuators and robots with tough hydrogels as the building blocks.

Tough complex hydrogels transformed from highly swollen polyelectrolyte hydrogels based on Cu2+ coordination with anti-bacterial properties.

The development of broad-spectrum anti-bacterial tough hydrogels without antibiotics remains a challenge in biomedical applications. In this study, we have synthesized a novel tough anti-bacterial complex hydrogel based on Cu2+ coordination. A swollen and weak poly(acrylamide-co-4-vinylbenzyl-(trihydroxymethyl-phosphonium)chloride) (P(AAm-co-VBzTHPC)) hydrogel was prepared by the radical copolymerization of AAm and VBzTHPC monomer solutions, followed by immersion in CuSO4 solution to coordinate with Cu2+ to form a strong and tough hydrogel. Fourier transform infrared (FTIR) spectra and X-ray photoelectron spectra (XPS) were used to characterize the coordination structure between phosphorus and oxygen atoms in the VBzTHPC monomer and copper ions. The water content and mechanical properties of the obtained hydrogel varied with gel composition. The prepared toughened hydrogel exhibited excellent anti-bacterial performance because of the introduction of copper ion coordination and the slow release of copper ions, with bacterial viability of 5.1% when the mole fraction of VBzTHPC was 10 mol%. Cell viability when cocultured with the toughened hydrogel was above 85% using the Cell Counting Kit-8 (CCK-8) method, indicating the good biocompatibility of the hydrogel. Compared with the control group experiment in vivo, this tough hydrogel can also promote wound healing, making it a promising candidate for wound dressing.

Magneto-Orientation of Magnetic Double Stacks for Patterned Anisotropic Hydrogels with Multiple Responses and Modulable Motions.

Reported here is a multi-response anisotropic poly(N-isopropylacrylamide) hydrogel developed by using a rotating magnetic field to align magnetic double stacks (MDSs) that are fixed by polymerization. The magneto-orientation of MDSs originates from the unique structure with γ-Fe2 O3 nanoparticles sandwiched by two silicate nanosheets. The resultant gels not only exhibit anisotropic optical and mechanical properties but also show anisotropic responses to temperature and light. Gels with complex ordered structures of MDSs are further devised by multi-step magnetic orientation and photolithographic polymerization. These gels show varied birefringence patterns with potentials as information materials, and can deform into specific configurations upon stimulations. Multi-gait motions are further realized in the patterned gel through dynamic deformation under spatiotemporal light and friction regulation by imposed magnetic force. The magneto-orientation assisted fabrication of hydrogels with anisotropic structures and additional functions should bring opportunities for gel materials in biomedical devices, soft actuators/robots, etc.

Digital Light Processing 3D Printing of Tough Supramolecular Hydrogels with Sophisticated Architectures as Impact-Absorption Elements.

Processing tough hydrogels into sophisticated architectures is crucial for their applications as structural elements. However, Digital Light Processing (DLP) printing of tough hydrogels is challenging because of the low-speed gelation and toughening process. Described here is a simple yet versatile system suitable for DLP printing to form tough hydrogel architectures. The aqueous precursor consists of commercial photoinitiator, acrylic acid, and zirconium ion (Zr4+ ), readily forming tough metallo-supramolecular hydrogel under digital light because of in situ formation of carboxyl-Zr4+ coordination complexes. The high-stiffness and antiswelling properties of as-printed gel enable high-efficiency printing to form high-fidelity constructs. Furthermore, swelling-induced morphing of the gel is also achieved by encoding structure gradients during the printing with grayscale digital light. Mechanical properties of the printed hydrogels are further improved after incubation in water due to the variation of local pH and rearrangement of coordination complex. The swelling-enhanced stiffness affords the printed hydrogel with shape fixation ability after manual deformations, and thereby provides an additional avenue to form more complex configurations. These printed hydrogels are used to devise an impact-absorption element or a high-sensitivity pressure sensor as proof-of-concept examples. This work should merit engineering of other tough gels and extend their scope of applications in diverse fields.

Healable, Recyclable, and Multifunctional Soft Electronics Based on Biopolymer Hydrogel and Patterned Liquid Metal.

Recent years have witnessed the rapid development of sustainable materials. Along this line, developing biodegradable or recyclable soft electronics is challenging yet important due to their versatile applications in biomedical devices, soft robots, and wearables. Although some degradable bulk hydrogels are directly used as the soft electronics, the sensing performances are usually limited due to the absence of distributed conducting circuits. Here, sustainable hydrogel-based soft electronics (HSE) are reported that integrate sensing elements and patterned liquid metal (LM) in the gelatin-alginate hybrid hydrogel. The biopolymer hydrogel is transparent, robust, resilient, and recyclable. The HSE is multifunctional; it can sense strain, temperature, heart rate (electrocardiogram), and pH. The strain sensing is sufficiently sensitive to detect a human pulse. In addition, the device serves as a model system for iontophoretic drug delivery by using patterned LM as the soft conductor and electrode. Noncontact detection of nearby objects is also achieved based on electrostatic-field-induced voltage. The LM and biopolymer hydrogel are healable, recyclable, and degradable, favoring sustainable applications and reconstruction of the device with new functions. Such HSE with multiple functions and favorable attributes should open opportunities in next-generation electronic skins and hydrogel machines.

Spontaneous and rapid electro-actuated snapping of constrained polyelectrolyte hydrogels.

Venus flytrap and bladderwort, capable of rapid predation through a snapping transition, have inspired various designs of soft actuators and robots with fast actions. These designs, in contrast to their natural counterparts, often require a direct force or pressurization. Here, we report a bistable domal hydrogel structure capable of spontaneous and reversible snapping under an electric field. Unlike a mechanical force, the electric field does not drive the gel directly. Instead, it redistributes mobile ions that direct the migration of water molecules and bends the polyelectrolyte hydrogel. Subject to constraint from surrounding neutral gel, the elastic energy accumulates until suddenly released by snapping, just like the process in natural organisms. Several proof-of-concept examples, including an optical switch, a speedy catcher, and a pulse pump, are designed to demonstrate the versatile functionalities of this unit capable of articulate motion. This work should bring opportunities to devise soft robotics, biomedical devices, etc.

Programmable Morphing Hydrogels for Soft Actuators and Robots: From Structure Designs to Active Functions.

Nature provides abundant inspiration and elegant paradigms for the development of smart materials that can actuate, morph, and move on demand. One remarkable capacity of living organisms is to adapt their shapes or positions in response to stimuli. Programmed deformations or movements in plant organs are mainly driven by water absorption/dehydration of cells, while versatile motions of mollusks are based on contraction/extension of muscles. Understanding the general principles of these morphing and motion behaviors can give rise to disruptive technologies for soft robotics, flexible electronics, biomedical devices, etc. As one kind of intelligent material, hydrogels with high similarity to soft biotissues and diverse responses to external stimuli are an ideal candidate to construct soft actuators and robots.The objective of this Account is to give an overview of the fundamental principles for controllable deformations and motions of hydrogels, with a focus on the structure designs and responsive functions of the corresponding soft actuators and robots. This field has been rapidly developed in recent years with a growing understanding of working principles in natural organisms and a substantial revolution of manufacturing technologies to devise bioinspired hydrogel systems with desired structures. Diverse morphing hydrogels and soft actuators/robots have been developed on the basis of several pioneering works, ranging from bending and folding deformations of bilayer hydrogels to self-shaping of non-Euclidean hydrogel surfaces, and from thermoactuated bilayer gel "hands" to electrodriven polyelectrolyte gel "worms". These morphing hydrogels have demonstrated active functions and versatile applications in biomedical and engineering fields.In this Account, we discuss recent progress in morphing hydrogels and highlight the design principles and relevant applications. First, we introduce the fundamentals of basic deformation modes, together with generic structure features, actuation strategies, and morphing mechanisms. The advantages of in-plane gradient structures are highlighted for programmable deformations by harnessing the out-of-plane buckling with bistability nature to obtain sophisticated three-dimensional configurations. Next, we give an overview of soft actuators and robots based on morphing hydrogels and focus on the working principles of the active systems with different structure designs. We discuss the advancements of hydrogel-based soft robots capable of swift locomotion with different gaits and emphasize the significances of structure control and dynamic actuation. Then we summarize versatile applications of hydrogel-based actuators and robots in biomedicines, cargo delivery, soft electronics, information encryption, and so forth. Some hydrogel robots with a built-in feedback loop and self-sensing system exhibit collaborative functions and advanced intelligence that are informative for the design of next-generation hydrogel machines. Finally, concluding remarks are given to discuss future opportunities and remaining challenges in this field. For example, miniature hydrogel-based actuators/robots with therapeutic or diagnostic functions are highly desired for biomedical applications. The morphing mechanisms summarized in this Account should be applicable to other responsive materials. We hope that this Account will inspire more scientists to be involved in this emerging area and make contributions to reveal novel working principles, design multifunctional soft machines, and explore applications in diverse fields.

Multi-level encryption of information in morphing hydrogels with patterned fluorescence.

Fluorescent hydrogels have attracted tremendous attention recently in the field of information security due to the booming development of information technology. Along this line, it is highly desired to improve the security level of concealed information by the advancements of materials and encryption technologies. Here we report multi-level encryption of information in a bilayer hydrogel with shape-morphing ability and patterned fluorescence. This hydrogel is composed of a fluorescence layer containing chromophore units in the poly(acrylic acid) network and an active layer with UV-absorption agents in the poly(N-isopropylacrylamide-co-acrylic acid) network. The former layer exhibits tunable fluorescence tailored by UV light irradiation to induce unimer-to-dimer transformation of the chromophores, facilitating the write-in of information through photolithography. The latter layer is responsive to temperature, enabling morphing of the bilayer hydrogel. Therefore, the bilayer hydrogel encoded with patterned fluorescent patterns can deform into three-dimensional configurations at room temperature to conceal the information, which is readable only after successive procedures of shape recovery at an appropriate temperature and under UV light irradiation from the right direction. The combination of morphing materials and patterned fluorescence as a new avenue to improve the encryption level of information should merit the design of other smart materials with integrated functions for specific applications.