RESUMEN
Characteristic properties of secondary electrons emitted from irradiated two-dimensional materials arise from multi-length and multi-time-scale relaxation processes that connect the initial nonequilibrium excited electron distribution with their eventual emission. To understand these processes, which are critical for using secondary electrons as high-resolution thermalization probes, we combine first-principles real-time electron dynamics with irradiation experiments. Our data for cold and hot proton-irradiated graphene show signatures of kinetic and potential emission and generally good agreement for electron yields between experiment and theory. The duration of the emission pulse is about 1.5 fs, which indicates high time resolution when used as a probe. Our newly developed method to predict kinetic energy spectra shows good agreement with electron and ion irradiation experiments and prior models. We find that the lattice temperature significantly increases secondary electron emission, whereas electron temperature has a negligible effect.
RESUMEN
The prospect of improved secondary ion yields for secondary ion mass spectrometry (SIMS) experiments drives innovation of new primary ion sources, instrumentation, and post-ionization techniques. The largest factor affecting secondary ion efficiency is believed to be the poor ionization probability (α+) of sputtered material, a value rarely measured directly, but estimated to be in some cases as low as 10-5. Our lab has developed a method for the direct determination of α+ in a SIMS experiment using laser post-ionization (LPI) to detect neutral molecular species in the sputtered plume for an organic compound. Here, we apply this method to coronene (C24H12), a polyaromatic hydrocarbon that exhibits strong molecular signal during gas-phase photoionization. A two-dimensional spatial distribution of sputtered neutral molecules is measured and presented. It is shown that the ionization probability of molecular coronene desorbed from a clean film under bombardment with 40 keV C60 cluster projectiles is of the order of 10-3, with some remaining uncertainty arising from laser-induced fragmentation and possible differences in the emission velocity distributions of neutral and ionized molecules. In general, this work establishes a method to estimate the ionization efficiency of molecular species sputtered during a single bombardment event. Graphical Abstract .
RESUMEN
Dynamic reactive ionization (DRI) utilizes a reactive molecule, HCl, which is doped into an Ar cluster projectile and activated to produce protons at the bombardment site on the cold sample surface with the presence of water. The methodology has been shown to enhance the ionization of protonated molecular ions and to reduce salt suppression in complex biomatrices. In this study, we further examine the possibility of obtaining improved quantitation with DRI during depth profiling of thin films. Using a trehalose film as a model system, we are able to define optimal DRI conditions for depth profiling. Next, the strategy is applied to a multilayer system consisting of the polymer antioxidants Irganox 1098 and 1010. These binary mixtures have demonstrated large matrix effects, making quantitative SIMS measurement not feasible. Systematic comparisons of depth profiling of this multilayer film between directly using GCIB, and under DRI conditions, show that the latter enhances protonated ions for both components by 4- to ~15-fold, resulting in uniform depth profiling in positive ion mode and almost no matrix effect in negative ion mode. The methodology offers a new strategy to tackle the matrix effect and should lead to improved quantitative measurement using SIMS. Graphical Abstract á .
Asunto(s)
Iones , Espectrometría de Masa de Ion Secundario , Polímeros , Protones , TrehalosaRESUMEN
In the context of a secondary ion mass spectrometry (SIMS) experiment, dynamic reactive ionization (DRI) involves introducing a reactive dopant, HCl, into an Ar gas cluster primary ion beam along with a source of water to enable dissociation of HCl to free protons. This concerted effect, precisely occurring at the impact site of the cluster beam, enhances the protonation of molecular species. Here, the authors apply this methodology to study the hippocampus and cerebellum region of a frozen-hydrated mouse brain section. To determine the degree of enhancement associated with DRI conditions, sequential tissue slices were arranged in a mirrored configuration so that comparable regions of the tissue could be explored. The results show that the protonated lipid species are increased by â¼10-fold, but that the normally prevalent salt adducts are virtually unaffected. This observation is discussed as a novel approach to minimizing SIMS matrix effects in complex materials. Moreover, the chemical images of protonated lipid ions exhibit clearer features in the cerebellum region as compared to images acquired with the pure Ar cluster beam.
Asunto(s)
Cerebelo/anatomía & histología , Cerebelo/química , Hipocampo/anatomía & histología , Hipocampo/química , Imagen Óptica/métodos , Manejo de Especímenes/métodos , Espectrometría de Masa de Ion Secundario/métodos , Animales , Lípidos/análisis , Ratones , Sales (Química)/análisisRESUMEN
Gas cluster ion beams (GCIB) have been tuned to enhance secondary ion yields by doping small gas molecules such as CH4, CO2, and O2 into an Ar cluster projectile, Arn + (n = 100010,000) to form a mixed cluster. The 'tailored beam' has the potential to expand the application of secondary ion mass spectrometry for two- and three-dimensional molecular specific imaging. Here, we examine the possibility of further enhancing the ionization by doping HCl into the Ar cluster. Water deposited on the target surface facilitates the dissociation of HCl. This concerted effect, occurring only at the impact site of the cluster, arises since the HCl is chemically induced to ionize to H+ and Cl , allowing improved protonation of neutral molecular species. This hypothesis is confirmed by depth profiling through a trehalose thin film exposed to D2O vapor, resulting in ~20-fold increase in protonated molecules. The results show that it is possible to dynamically maintain optimum ionization conditions during depth profiling by proper adjustment of the water vapor pressure. HD exchange in the trehalose molecule M was monitored upon deposition of D2O on the target surface, leading to the observation of [Mn* + H]+ or [Mn* + D]+ ions, where n = 18 hydrogen atoms in the trehalose molecule M have been replaced by deuterium. In general, we discuss the role of surface chemistry and dynamic reactive ionization of organic molecules in increasing the secondary ion yield.
Asunto(s)
Ácido Clorhídrico/química , Espectrometría de Masa de Ion Secundario/métodos , Trehalosa/química , Óxido de Deuterio/química , HieloRESUMEN
We report the results of a VAMAS (Versailles Project on Advanced Materials and Standards) interlaboratory study on the measurement of composition in organic depth profiling. Layered samples with known binary compositions of Irganox 1010 and either Irganox 1098 or Fmoc-pentafluoro-l-phenylalanine in each layer were manufactured in a single batch and distributed to more than 20 participating laboratories. The samples were analyzed using argon cluster ion sputtering and either X-ray photoelectron spectroscopy (XPS) or time-of-flight secondary ion mass spectrometry (ToF-SIMS) to generate depth profiles. Participants were asked to estimate the volume fractions in two of the layers and were provided with the compositions of all other layers. Participants using XPS provided volume fractions within 0.03 of the nominal values. Participants using ToF-SIMS either made no attempt, or used various methods that gave results ranging in error from 0.02 to over 0.10 in volume fraction, the latter representing a 50% relative error for a nominal volume fraction of 0.2. Error was predominantly caused by inadequacy in the ability to compensate for primary ion intensity variations and the matrix effect in SIMS. Matrix effects in these materials appear to be more pronounced as the number of atoms in both the primary analytical ion and the secondary ion increase. Using the participants' data we show that organic SIMS matrix effects can be measured and are remarkably consistent between instruments. We provide recommendations for identifying and compensating for matrix effects. Finally, we demonstrate, using a simple normalization method, that virtually all ToF-SIMS participants could have obtained estimates of volume fraction that were at least as accurate and consistent as XPS.
Asunto(s)
Laboratorios , Compuestos Orgánicos/química , Espectroscopía de Fotoelectrones , Espectrometría de Masa de Ion Secundario , Hidroxitolueno Butilado/análogos & derivados , Hidroxitolueno Butilado/química , Fluorenos/química , Fluorobencenos/químicaRESUMEN
Strong field ionization (SFI) was applied for the secondary neutral mass spectrometry (SNMS) of patterned rubrene films, mouse brain sections, and Botryococcus braunii algal cell colonies. Molecular ions of rubrene, cholesterol, C31 diene/triene, and three wax monoesters were detected, representing some of the largest organic molecules ever ionized intact by a laser post-ionization experiment. In rubrene, the SFI SNMS molecular ion signal was ~4 times higher than in the corresponding secondary-ion mass spectroscopy (SIMS) analysis. In the biological samples, the achieved signal improvements varied among molecules and sampling locations, with SFI SNMS, in some cases, revealing analytes made completely undetectable by the influence of matrix effects in SIMS.
Asunto(s)
Fulerenos/química , Naftacenos/análisis , Espectrometría de Masa de Ion Secundario , Animales , Encéfalo/patología , Chlorophyta/metabolismo , Colesterol/análisis , RatonesRESUMEN
The formation of neutral gas phase indium carbide clusters under C60(+) ion bombardment of solid indium was investigated using laser based postionization prior to mass spectrometric detection. Two different postionization methods were used and shown to provide saturated photoionization efficiency, thereby delivering nearly the same information about the composition of the sputtered material. The resulting size distributions of neutral In(m)C(n) clusters are compared with those of the corresponding cationic secondary cluster ions and discussed in terms of calculated cluster properties. Investigating the dependence on C60(+) ion fluence, we demonstrate that clusters containing only one carbon atom are formed in single impact events, whereas the formation of more carbon-rich clusters results from carbon accumulation at the bombarded surface.
RESUMEN
RATIONALE: Chemical modification of a rare gas cluster ion beam (GCIB) to increase the intensity of desorbed molecular ions in secondary ion mass spectrometry experiments relative to the pure Ar cluster. METHODS: Doping of the GCIB by mixing small concentration levels (1-3% relative partial pressure) of CH4 into the Ar gas driving the cluster ion source. RESULTS: Mass spectra measured on a trehalose film using the doped GCIB exhibit enhanced molecular ion signals. From depth profiling experiments, the results are shown to arise from an increase in the ionization efficiency of the sputtered molecules rather than a change in the sputtering yield of neutral species. CONCLUSIONS: Tuning of the chemistry of mixed clusters is suggested as a general approach to enhancing the ionization probability of sputtered molecules.
Asunto(s)
Espectrometría de Masa de Ion Secundario/métodos , Gases , Iones/química , Metano/química , TrehalosaRESUMEN
An Ar n+ (n = 1-6000) gas cluster ion source has been utilized to map the chemical distribution of lipids in a mouse brain tissue section. We also show that the signal from high mass species can be further enhanced by doping a small amount of CH4 into the Ar cluster to enhance the ionization of several biologically important molecules. Coupled with secondary ion mass spectrometry instrumentation which utilizes a continuous Ar cluster ion projectile, maximum spatial resolution and maximum mass resolution can be achieved at the same time. With this arrangement, it is possible to achieve chemically resolved molecular ion images at the 4-µm resolution level. The focused Ar n+/[Ar x (CH4) y ]+ beams (4-10 µm) have been applied to the study of untreated mouse brain tissue. A high signal level of molecular ions and salt adducts, mainly from various phosphocholine lipids, has been seen and directly used to map the chemical distribution. The signal intensity obtained using the pure Ar cluster source, the CH4-doped cluster source and C60 is also presented.
RESUMEN
Molecular depth profiling of organic thin films by erosion with energetic cluster ion beams is a unique aspect of secondary ion mass spectrometry (SIMS) experiments. Although depth profiles of complex multilayer organic structures can be acquired with little damage accumulation and with depth resolution of <10 nm using either C60(+) or Arx(+) with x = 500-5000, hybrid materials consisting of both organic and inorganic layers often yield poor results. To unravel the factors that lead to this difficulty, we developed a model system composed of a thin gold layer of 1.4 to 3.5 nm deposited either on top of or sandwiched within a cholesterol thin film matrix which is several hundred nanometers thick. For these systems, the results show that by erosion with a 40 keV C60(+) beam, reliable depth profiles can always be acquired as indicated by the presence of a steady state molecular ion signal. During the erosion process, however, gold atoms from the gold overlayer are implanted into the cholesterol matrix beneath it, resulting in a reduced sputter yield, an increase in the amount of cholesterol fragmentation and an increase in the thickness of the cluster ion-induced altered layer. The results also show that the effects of the metal film on the organic substrate are independent of the gold film thickness once the film thickness exceeds 1.4 nm. In general, this model study provides mechanistic insight into the depth profiling of heterogeneous thin film structures and offers a possible path for improving the quality of the depth profiles by employing low energy atomic ion sputtering in the region of the metal layer.
RESUMEN
Time-of-flight secondary ion mass spectrometry (TOF-SIMS) and atomic force microscopy (AFM) are employed to characterize a wedge-shaped crater eroded by a 40 keV C(60) (+) cluster ion beam on an organic thin film of 402 nm of barium arachidate (AA) multilayers prepared by the Langmuir-Blodgett (LB) technique. Sample cooling to 90 K was used to help reduce chemical damage, improve depth resolution and maintain constant erosion rate during depth profiling. The film was characterized at 90 K, 135 K, 165 K, 205 K, 265 K and 300 K. It is shown that sample cooling to 205 K or lower helps to inhibit erosion rate decay, whereas at 300 K and 265 K the erosion rate continues to drop after 250 nm of erosion, reaching about half of the initial value after removal of the entire film. Depth profiles are acquired from the SIMS images of the eroded wedge crater. The results suggest that sample cooling only slightly improves the altered layer thickness, but eliminates the decrease in erosion rate observed above 265 K.
RESUMEN
Recent experimental measurements and calculations performed by molecular dynamics computer simulations indicate, for highly energetic C60 primary ions bombarding molecular solids, the emission of intact molecules is unique. An energy- and angle-resolved neutral mass spectrometer coupled with laser photoionization techniques was used to measure the polar angle distribution of neutral benzo[a]pyrene molecules desorbed by 20-keV [Formula: see text] primary ions and observed to peak at off-normal angles integrated over all possible emission energies. Similarly, computer simulations of 20-keV C60 projectiles bombarding a coarse-grained benzene system resulted in calculations of nearly identical polar angle distributions. Upon resolving the measured and calculated polar angle distributions, sputtered molecules with high kinetic energies are the primary contributors to the off-normal peak. Molecules with low kinetic energies were measured and calculated to desorb broadly peaked about the surface normal. The computer simulations suggest the fast deposition of energy from the C60 impact promotes the molecular emission by fluid-flow and effusive-type motions. The signature of off-normal emission angles is unique for molecules because fragmentation processes remove molecules that would otherwise eject near normal to the surface. Experimental measurements from a Ni {001} single crystal bombarded by 20-keV [Formula: see text] demonstrate the absence of this unique signature.
RESUMEN
The quality of molecular depth profiles created by erosion of organic materials by cluster ion beams exhibits a strong dependence upon temperature. To elucidate the fundamental nature of this dependence, we employ the Irganox 3114/1010 organic delta-layer reference material as a model system. This delta-layer system is interrogated using a 40 keV C(60)(+) primary ion beam. Parameters associated with the depth profile such as depth resolution, uniformity of sputtering yield, and topography are evaluated between 90 and 300 K using a unique wedge-crater beveling strategy that allows these parameters to be determined as a function of erosion depth from atomic force microscope (AFM) measurements. The results show that the erosion rate calibration performed using the known Δ-layer depth in connection with the fluence needed to reach the peak of the corresponding secondary ion mass spectrometry (SIMS) signal response is misleading. Moreover, we show that the degradation of depth resolution is linked to a decrease of the average erosion rate and the buildup of surface topography in a thermally activated manner. This underlying process starts to influence the depth profile above a threshold temperature between 210 and 250 K for the system studied here. Below that threshold, the process is inhibited and steady-state conditions are reached with constant erosion rate, depth resolution, and molecular secondary ion signals from both the matrix and the Δ-layers. In particular, the results indicate that further reduction of the temperature below 90 K does not lead to further improvement of the depth profile. Above the threshold, the process becomes stronger at higher temperature, leading to an immediate decrease of the molecular secondary ion signals. This signal decay is most pronounced for the highest m/z ions but is less for the smaller m/z ions, indicating a shift toward small fragments by accumulation of chemical damage. The erosion rate decay and surface roughness buildup, on the other hand, exhibit a rather sudden delayed onset after erosion of about 150 nm, indicating that a certain damage level must be reached in order to influence the erosion dynamics. Only after that onset does the depth resolution become compromised, indicating that the temperature reduction does not significantly influence parameters like ion-beam mixing or the altered-layer thickness. In general, the wedge-crater beveling protocol is shown to provide a powerful basis for increased understanding of the fundamental factors that affect the important parameters associated with molecular depth profiling.
Asunto(s)
Hidroxitolueno Butilado/análogos & derivados , Espectrometría de Masa de Ion Secundario/métodos , Hidroxitolueno Butilado/química , Calibración , Iones/química , Microscopía de Fuerza Atómica , Propiedades de Superficie , TemperaturaRESUMEN
The angular distribution of intact organic molecules desorbed by energetic C(60) primary ions was probed both experimentally and with molecular dynamics computer simulations. For benzo[a]pyrene, the angular distribution of intact molecules is observed to peak at off-normal angles. Molecular dynamics computer simulations on a similar system show the mechanism of desorption involves fast deposition of energy followed by fluid-flow and effusive-type emission of intact molecules. The off-normal peak in the angular distribution is shown to arise from emission of intact molecules from the rim of a crater formed during the cluster impact. This signature is unique for molecules because fragmentation processes remove molecules that would otherwise eject at directions near-normal to the surface.
RESUMEN
Time-of-flight secondary ion mass spectrometry and atomic force microscopy are employed to characterize a wedge-shaped crater eroded by a 40-keV C(60)(+) cluster ion beam on an organic film of Irganox 1010 doped with Irganox 3114 delta layers. From an examination of the resulting surface, the information about depth resolution, topography, and erosion rate can be obtained as a function of crater depth for every depth in a single experiment. It is shown that when measurements are performed at liquid nitrogen temperature, a constant erosion rate and reduced bombardment induced surface roughness is observed. At room temperature, however, the erosion rate drops by â¼(1)/(3) during the removal of the 400 nm Irganox film and the roughness gradually increased to from 1 nm to â¼4 nm. From SIMS lateral images of the beveled crater and AFM topography results, depth resolution was further improved by employing glancing angles of incidence and lower primary ion beam energy. Sub-10 nm depth resolution was observed under the optimized conditions on a routine basis. In general, we show that the wedge-crater beveling is an important tool for elucidating the factors that are important for molecular depth profiling experiments.
Asunto(s)
Microscopía de Fuerza Atómica/métodos , Imagen Molecular/métodos , Espectrometría de Masa de Ion Secundario/métodos , Hidroxitolueno Butilado/análogos & derivados , Hidroxitolueno Butilado/química , Iones/química , Imagen Molecular/instrumentación , Silicio/química , TemperaturaRESUMEN
An organic delta layer system made of alternating Langmuir-Blodgett multilayers of barium arachidate (AA) and barium dimyristoyl phosphatidate (DMPA) was constructed to elucidate the factors that control depth resolution in molecular depth profile experiments. More specifically, one or several bilayers of DMPA (4.4 nm) were embedded in relatively thick (51 to 105 nm) multilayer stacks of AA, resulting in a well-defined delta layer model system closely resembling a biological membrane. 3-D imaging time-of-flight secondary ion mass spectrometry (TOF-SIMS) depth profile analysis was performed on this system using a focused buckminsterfullerene (C(60)) cluster ion beam. The delta layer depth response function measured in these experiments exhibits similar features as those determined in inorganic depth profiling, namely an asymmetric shape with quasi-exponential leading and trailing edges and a central Gaussian peak. The effects of sample temperature, primary ion kinetic energy, and incident angle on the depth resolution were investigated. While the information depth of the acquired SIMS spectra was found to be temperature independent, the depth resolution was found to be significantly improved at low temperature. Ion induced mixing is proposed to be largely responsible for the broadening, rather than topography, as determined by atomic force microscopy (AFM); therefore, depth resolution can be optimized using lower kinetic energy, glancing angle, and liquid nitrogen temperature.
Asunto(s)
Fulerenos/química , Membrana Dobles de Lípidos/química , Espectrometría de Masas/métodos , Ácidos Eicosanoicos/química , Glicerofosfolípidos/química , Imagen Molecular , TemperaturaRESUMEN
A molecular multilayer stack composed of alternating Langmuir-Blodgett films was analyzed by ToF-SIMS imaging in combination with intermediate sputter erosion using a focused C60+ cluster ion beam. From the resulting dataset, depth profiles of any desired lateral portion of the analyzed field-of-view can be extracted in retrospect, allowing the influence of the gating area on the apparent depth resolution to be assessed. In a similar way, the observed degradation of depth resolution with increasing depth of the analyzed interface can be analyzed in order to determine the 'intrinsic' depth resolution of the method.
RESUMEN
Secondary ion mass spectrometry and atomic force microscopy are employed to characterize a wedge-shaped crater eroded by 40 keV C(60)(+) bombardment of a 395 nm thin film of Irganox 1010 doped with four delta layers of Irganox 3114. The wedge structure creates a laterally magnified cross section of the film. From an examination of the resulting surface, information about depth resolution, topography, and erosion rate can be obtained as a function of crater depth in a single experiment. This protocol provides a straightforward way to determine the parameters necessary to characterize molecular depth profiles and to obtain an accurate depth scale for erosion experiments.