Autistic traits and eating behaviors in Chinese preschoolers: Role of sensory profiles and home environment.

OBJECTIVE: This study aims to 1) explore the association between autistic traits and eating behaviors in Chinese preschoolers; 2) explore the mediating role of sensory processing patterns on the relation of autistic traits and eating-related behaviors; and 3) examine home nurturing environment as a moderator between autistic traits and eating-related behaviors. We hypothesize that there is a significant association between autistic traits and eating behaviors, which is mediated by sensory processing patterns and moderated by the home nurturing environment. METHOD: 509 children aged 3-4 years participated in this cross-sectional research. They were assessed using the Social Responsiveness Scale-Second Edition (SRS-2) for autistic traits, the Chinese Preschoolers' Eating Behavior Questionnaire (CPEBQ) for eating-related behaviors, the Short Sensory Profile-Second Edition (SSP-2) for sensory processing patterns, and the Children Home Nurture Environment Questionnaire (CHNEQ) for home nurturing environment. Mediation regression analyses were used to examine the role of sensory processing patterns, while moderation analyses to examine the role of home nurturing environment. RESULTS: We observed a positive association between autistic traits and eating behavior problems among typically developed children. Sensory processing patterns significantly mediated the impact of autistic traits on children's eating-related behaviors and home nurturing environment also moderated this relationship. DISCUSSION: Our research suggests that Chinese preschoolers with higher autistic traits may face more eating challenges when they possess more heightened sensory processing patterns, while living in supportive home environments helps to improve their eating behaviors. These findings contribute to the understanding of how and to what extent eating problems are influenced by autistic traits, and they offer insight into the alleviation of eating problems from the perspectives of sensory patterns and family nurturing environments.

Ocular Pharmacokinetic Properties of Intravitreally Injected Aflibercept in Rabbits After Using Brinzolamide/Timolol Eye Drops.

Purpose: To investigate the ocular pharmacokinetic properties of intravitreally injected aflibercept in rabbits after using brinzolamide 1%/timolol maleate 0.5% fixed-combination eye drops. Methods: The right eye of 5 rabbits was topically administered 30 µL of brinzolamide and timolol maleate eye drops twice a day (q12h). The 2 eyes of each rabbit were injected with 1.0 mg (0.025 cc) of aflibercept on the 2nd day after instilling the eye drops. The intraocular pressure of the rabbits was measured before injection and sampling. The aqueous humor was drawn at 1, 3, 7, 14, 21, and 28 days. Aflibercept concentrations in aqueous humor and vitreous humor (28 days) were measured by enzyme-linked immunosorbent assay. Results: The aflibercept aqueous concentrations in the right eye at days 7, 14, 21, and 28 after injection were all significantly higher than those in the left eye (P > 0.05, n = 5). The peak aqueous concentrations of aflibercept in right eyes (49.5 µg/mL) and left eyes (50.9 µg/mL) were both observed at 1 day after injection. The elimination half-life of aflibercept in the aqueous humor of the right eye (4.70 days) was 1 day longer than that of the left eye (3.65 days). The average percentage of residual aflibercept in the vitreous humor of the right eye (3.35%) was also significantly higher than that of the left eye (0.63%). Conclusions: Brinzolamide 1%/timolol maleate 0.5% fixed-combination eye drops can significantly extend the ocular residence time of intravitreally injected aflibercept.

Identification of a de novo mutation of the FOXG1 gene and comprehensive analysis for molecular factors in Chinese FOXG1-related encephalopathies.

Background: FOXG1-related encephalopathy, also known as FOXG1 syndrome or FOXG1-related disorder, affects most aspects of development and causes microcephaly and brain malformations. This syndrome was previously considered to be the congenital variant of Rett syndrome. The abnormal function or expression of FOXG1, caused by intragenic mutations, microdeletions or microduplications, was considered to be crucial pathological factor for this disorder. Currently, most of the FOXG1-related encephalopathies have been identified in Europeans and North Americans, and relatively few Chinese cases were reported. Methods: Array-Comparative Genomic Hybridization (Array-CGH) and whole-exome sequencing (WES) were carried out for the proband and her parent to detect pathogenic variants. Results: A de novo nonsense mutation (c.385G>T, p.Glu129Ter) of FOXG1 was identified in a female child in a cohort of 73 Chinese children with neurodevelopmental disorders/intellectual disorders (NDDs/IDs). In order to have a comprehensive view of FOXG1-related encephalopathy in China, relevant published reports were browsed and twelve cases with mutations in FOXG1 or copy number variants (CNVs) involving FOXG1 gene were involved in the analysis eventually. Feeding difficulties, seizures, delayed speech, corpus callosum hypoplasia and underdevelopment of frontal and temporal lobes occurred in almost all cases. Out of the 12 cases, eight patients (66.67%) had single-nucleotide mutations of FOXG1 gene and four patients (33.33%) had CNVs involving FOXG1 (3 microdeletions and 1 microduplication). The expression of FOXG1 could also be potentially disturbed by deletions of several brain-active regulatory elements located in intergenic FOXG1-PRKD1 region. Further analysis indicated that PRKD1 might be a cooperating factor to regulate the expression of FOXG1, MECP2 and CDKL5 to contribute the RTT/RTT-like disorders. Discussion: This re-analysis would broaden the existed knowledge about the molecular etiology and be helpful for diagnosis, treatment, and gene therapy of FOXG1-related disorders in the future.

A de Novo ZMIZ1 Pathogenic Variant for Neurodevelopmental Disorder With Dysmorphic Facies and Distal Skeletal Anomalies.

Background: Neurodevelopmental disorder with dysmorphic facies and distal skeletal anomalies (NEDDFSA) is a rare syndromic disorder characterized by global neurodevelopmental delay, early-onset hypotonia, poor overall growth, poor speech/language ability, and additional common phenotypes such as eye anomalies, joint hypermobility, and skeletal anomalies of the hands and feet. NEDDFSA is caused by heterozygous pathogenic variants in the ZMIZ1 gene on chromosome 10q22.3 with autosomal dominant (AD) mode of inheritance. All the 32 reported cases with variants in ZMIZ1 gene had a genetic background in Caucasian, Hispanic, North African, and Southeastern Asian. Until now, there are no reports of Chinese patients with ZMIZ1 pathogenic variants. Methods: A 5-year-old girl was found to have the characteristic phenotypes of NEDDFSA. Array-Comparative Genomic Hybridization (array-CGH) and whole exome sequencing (WES) were applied for the trio of this female patient. Sanger sequencing was used to verify the selected variants. A comprehensive molecular analysis was carried out by protein structure prediction, evolutionary conservation, motif scanning, tissue-specific expression, and protein interaction network to elucidate pathogenicity of the identified ZMIZ1 variants. Results: The karyotype was 46, XX with no micro-chromosomal abnormalities identified by array-CGH. There were 20 variants detected in the female patient by WES. A de novo heterozygous missense variant (c.2330G > A, p.Gly777Glu, G777E) was identified in the exon 20 of ZMIZ1. No variants of ZMIZ1 were identified in the non-consanguineous parents and her healthy elder sister. It was predicted that G777E was pathogenic and detrimental to the spatial conformation of the MIZ/SP-RING zinc finger domain of ZMIZ1. Conclusion: Thus far, only four scientific articles reported deleterious variants in ZMIZ1 and most of the cases were from Western countries. This is the first report about a Chinese patient with ZMIZ1 variant. It will broaden the current knowledge of ZMIZ1 variants and variable clinical presentations for clinicians and genetic counselors.

The Facile Strategy of Improving the Long-Term Stability of Highly Transparent Polyvinyl Chloride by Introducing Unsaturated Zn Oleate and Uracil Derivatives.

In order to improve the initial color and the long-term heat stability of super-transparent polyvinyl chloride (PVC), a series of composite heat stabilizers consisting of unsaturated Zn oleate and uracil derivatives have been designed in this paper. The uracil derivatives are 1,3-dimethyl-6-amino-uracil (DAU) and 6,6'-diamino-1,1',3,3'-tetramethyl-5,5'-(ethylidene)bisuracil (OSU). The static thermal stability, dynamic thermal stability, and transparency were used to evaluate the properties of the stabilized transparent PVC sheets. The results indicate that the compatibility between the stabilizer and PVC was greatly enhanced by introducing an unsaturated long-chain Zn oleate and a long alkyl chain bisuracil derivative. Through the thermal discoloration test, the best ratio of DAU/zinc oleate (DAU/Zn) and OSU/zinc oleate (OSU/Zn) was determined to be 4:1, with a total amount of 3 phr in 100 phr PVC. It was verified that the combination of zinc oleate with uracil derivatives could improve the long-term thermal stability of PVC, and the DAU/Zn was better than that of the OSU/Zn. In addition, through the transmission/haze verification, adding a proper amount of epoxidized soybean oil (ESBO) and phosphite ester to the OSU/Zn system has a certain synergistic effect. The thermal stability and transparency of PVC can be remarkably enhanced.

Preparation and performance of photocatalytic NO degradation superhydrophobic coatings for tunnel.

Due to the semi-closed structure of the tunnel, serious air pollution in tunnels from vehicle exhaust becomes an issue which needed to be addressed. Among the exhaust, nitric oxide (NO) is typically considered as one of the main pollutants. In this paper, a superhydrophobic photocatalytic coating was fabricated by a spraying method by airbrush with a WO3/TiO2 photocatalysis for NO degradation. The water advanced contact angle (WACA) of the coating reached 166.32°, and the WACA was still above 145° after the 30 times abrasion test. The coating exhibited an excellent ability to remove inorganic and organic pollutants. Also, the NO degradation efficiency of this superhydrophobic coating under ultraviolet and visible light sources and humid environments was tested. When the relative humidity reached 98%, the NO degradation efficiency of the coating remained unchanged under visible light irradiation compared with the relative humidity of 45%. In addition, the coating exhibited prominent stability of NO degradation during the cyclic test. Furthermore, the WT coating showed stability and synergy of self-cleaning and photocatalysis toward NO degradation, which ensured the long-term use of the coating. Finally, a synergistic mechanism for self-cleaning and photocatalysis was proposed. This may provide a new idea and support for the application of photocatalytic technology in the degradation of NO in the tunnel.

A sensitive and rapid bioanalytical method for the quantitative determination of luliconazole in rabbit eye tissues using UPLC-MS/MS assay.

Luliconazole (LCZ) is a novel antifungal imidazole with broad-spectrum and high susceptibility of Aspergillus and Fusarium are the dominant species of fungal keratitis, may potentially be a new medical treatment option for ocular fungal infection. To evaluate LCZ distribution in ocular tissues after topical application for the development of ophthalmic delivery system, it is important to have a bioanalytical method for measuring the drug concentrations in different ocular tissues and aqueous humor (AH). A selective and sensitive ultrahigh performance liquid chromatography coupled with tandem mass spectrometry (UPLC-MS/MS) method was developed for the quantification of LCZ in rabbit ocular tissues, including conjunctiva, cornea, AH, iris, lens, vitreous humor (VH), retinal choroid and sclera, using lanoconazole as internal standard (IS). Chromatographic separation was achieved on a Xterra MS, C18 column (2.1 × 50 mm, 3.5 µm) using mobile phase with formic acid solution (0.2%, v/v): acetonitrile (50:50, v/v) at a flow rate of 0.2 ml/min, and the run time was 2.5 min. Detection was performed using the transitions 354.1 → 150.3 m/z for LCZ and 320.1 → 150.3 m/z for IS by positive ion electrospray ionization in multiple reaction monitoring (MRM) mode. Method validation was conducted in accordance with U.S. Food and Drug Administration's regulatory guidelines for bioanalytical method validation. The calibration curves were linear over the concentration range from 2.80 ng/ml to 2038 ng/ml for conjunctiva, cornea and sclera, 2.09 ng/ml to 1019 ng/ml for AH, 2.09 ng/ml to 509.5 ng/ml for iris, 2.09 ng/ml to 203.8 ng/ml for retinal choroid and VH, 2.04 ng/ml to 101.9 ng/ml for lens, with all the squared correlation coefficients (r2) more than 0.99. The accuracy of the method was within the acceptable limit of 89.34%∼112.78% at the lower limit of quantification and other concentrations, Inter-day and intra-day precision values, expressed in terms of RSD (%), in all tissues were within 15% at all concentrations. The mean recoveries of LCZ in rabbit ocular tissues was 84.85%∼100.52%. No interference was found due to matrix components. Luliconazole was stable during the stability studies, including autosampler stability, benchtop stability, freeze/thaw stability and long-term stability. The method was successfully applied to the ocular pharmacokinetic and tissues distribution studies of LCZ in rabbit after topical administration of LCZ ophthalmic drug delivery system.

Improvement mechanism of NO photocatalytic degradation performance of self-cleaning synergistic photocatalytic coating under high humidity.

Photocatalytic coating has been widely studied as a promising material to remove air pollutants. However, the effectiveness and long-term effect of photocatalysis in high relative humidity environment is still the main challenge in this field. In this study, a fluorinated WO3-TiO2 nanorods/SiO2 epoxy photocatalytic superamphiphobic coating (FTSE coating) was prepared using a simple spraying method. The micromorphology and chemical composition of FTSE coating was characterized by SEM, EDS, FT-IR, XPS and TGA techniques. The advanced contact angle and hysteresis angle test show that the FTSE coating had excellent superamphiphobicity. The mechanical abrasions, corrosion resistance and UV aging tests show that the FTSE coating exhibited reasonable durability. Besides, the NO degradation efficiency of hydrophilic and superamphiphobic coatings with contact angles of 20.19°, 87.74°, 162.93° and 164.47° was tested in different humidity environment. The results showed that the superamphiphobic coating exhibited more superior photocatalytic degradation efficiency (84.02%) than the hydrophilic coating (51.38%) at a high relative humidity (RH=98%). Finally, FTSE coating exhibited prominent photocatalytic stability and the synergistic effect of photocatalysis and self-cleaning. After 30 d outdoor weathering test, the NO degradation efficiency decreased by 13.07% and recovered to the original level after flushing. The improvement mechanism of NO degradation performance was proposed based on the characteristics of superamphiphobic surface.

Controllable Synthesis of Enhanced Visible Light Responded Fe, N, Co Tri-TiO2@MCM-41 Nanocomposites and Its Photocatalytic Performance.

A novel method for in situ synthesis of Fe, N, Co tri-TiO2 (DT) loading on MCM-41 composite photocatalyst was proposed. Fe, N, Co tri-TiO2@MCM-41 (DTM) with adsorption-degradation synergy was prepared by adjusting tetrabutyl titanate (TBOT) concentrations, the alcohol-water ratio in the atmosphere of the reaction chamber. The influence of preparation parameters on the texture structure, catalytic activity, and the synergism of adsorption and degradation of the DTM was discussed, the optimal parameters were determined. The DTM was characterized by XRD, TEM, BET, FT-IR, and UV-Vis. Besides, the DTM exhibited obvious redshift and visible catalytic activity compared with undoped TiO2@MCM-41 (TM), which possessed excellent performance in the degradation of gaseous and liquid pollutants. The degradation rate of methylene blue (MB) and nitric oxide (NO) was 96.39% and 56.75%, respectively. Furthermore, DTM photocatalyst exhibited excellent reusability. The degradation efficiency of MB and NO after five cycles decreased by 4.54% and 5.89%, respectively.

Photocatalytic Superamphiphobic Coatings and the Effect of Surface Microstructures on Superamphiphobicity.

In recent years, superamphiphobic coatings have been widely used in industrial transportation and environmental treatments because of their unique liquid repellency. In this study, WO3-TiO2 nanorods/SiO2 were used as the constructor of surface microstructures, and 1H,1H,2H,2H-perfluorodecyltriethoxysilane was used as the provider of low surface energy, and a photocatalytic superamphiphobic coating (FTS coating) was prepared. The microstructure and chemical composition of the coating was characterized by scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), Fourier-transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), and thermogravimetric analysis (TGA). The coating exhibited excellent photocatalytic activity toward degradation methyl red and nitric oxide (NO), and the degradation efficiency to NO reached 47.8%. Also, the advanced contact angle and the hysteresis angle of water, glycol, glycerol, and olive oil was used to evaluate the superamphiphobicity. After 7 days of ultraviolet (UV) aging, five cycles of airbrush flushing and 48 h of immersion in acid, salt, and alkali solutions, the FTS coating still exhibits excellent amphiphobicity, which lays a foundation for its large-scale applications in the concrete exterior wall. The surface microstructure and the formation of air pockets are a prerequisite for superamphiphobicity, which promotes the liquid on the coating surface into the Cassie-Baxter state. Furthermore, the formation of air pockets is closely related to the gas adsorption capacity and the specific surface area (SBET) of the surface microstructure on the coating surface. The coatings with different SBET constructed and the advanced contact angle were measured. The influence of air pockets on the superamphiphobicity of coatings was studied in combination with the optical microscope. The understanding that SBET further influences superamphiphobicity by affecting the surface air pockets is proposed.

A Comparative Ocular Pharmacokinetics Study of Preservative-Free Latanoprost Unit-Dose Eye Drops and a Benzalkonium Chloride-Preserved Branded Product Following Topical Application to Rabbits.

Purpose: To evaluate the aqueous humor pharmacokinetics of a preservative-free 0.005% latanoprost unit-dose eye drop (test drug) compared with that of a benzalkonium chloride (BAK)-preserved 0.005% latanoprost branded product (control drug) following topical application to rabbits. Methods: A total of 120 healthy New Zealand albino rabbits were administrated test eye drops (T group) or control eye drops (C group) for a comparative pharmacokinetics study. The aqueous humor was collected at 0.5, 1, 1.5, 2, 3, 4, 6, 8, 12, and 24 h after a single dose or multiple doses. Ultraperformance liquid chromatography-tandem quadrupole mass spectrometry was employed to detect latanoprost free acid (LTA, the active metabolite of latanoprost) in the aqueous humor. Results: For the single-dose study, there was no significant difference (t-test, P > 0.05) in the peak concentration (Cmax) of LTA in aqueous humor between the T group (69.0 ± 23.4 ng/mL) and C group (73.8 ± 28.7 ng/mL). The area under the curve values over 12 h (AUC0-12h) of LTA for the 2 groups were 254.4 (ng/mL) × h and 219.5 (ng/mL) × h, respectively. For the multidose study, there was also no significant difference (t-test, P > 0.05) in the Cmax of LTA in the aqueous humor between the T group (86.8 ± 21.2 ng/mL) and C group (70.5 ± 25.9 ng/mL). The AUC0-12h values of LTA for the 2 groups were 274.5 (ng/mL) × h and 256.3 (ng/mL) × h, respectively. Conclusions: The preservative-free 0.005% latanoprost unit-dose eye drops demonstrated similar pharmacokinetic properties to the BAK-preserved branded product following topical application to rabbits.

The Photocatalytic Degradation of Vehicle Exhausts by an Fe/N/Co-TiO2 Waterborne Coating under Visible Light.

Based on the three-dimensional network structure of a polymer and the principle of photocatalysts, a visible-light-responsive and durable photocatalytic coating for the degradation of vehicle exhaust (VE) has been constructed using a waterborne acrylic acid emulsion as the coating substrate; Fe/N/Co-TiO2 nanoparticles (NPs) as photocatalytic components; and water, pigments, and fillers as additives. The visible-light-responsive Fe/N/Co-TiO2 NPs with an average size of 100 nm were prepared by sol-gel method firstly. The co-doping of three elements extended the absorption range of the modified TiO2 nanoparticles to the visible light region, and showed the highest light absorption intensity, which was confirmed by the ultraviolet-visible absorption spectra (UV-Vis). X-ray diffraction (XRD) measurements showed that element doping prevents the transition from anatase to rutile and increases the transition temperature. TiO2 was successfully doped due to the reduction of the chemical binding energy of Ti, as revealed by X-ray photoelectron spectroscopy (XPS). The degradation rates of NOX, CO, and CO2 in VE by Fe/N/Co-TiO2 NPs under visible light were 71.43%, 23.79%, and 21.09%, respectively. In contrast, under the same conditions, the degradation efficiencies of coating for VE decreased slightly. Moreover, the elementary properties of the coating, including pencil hardness, adhesive strength, water resistance, salt, and alkali resistance met the code requirement. The photocatalytic coating exhibited favorable reusability and durability, as shown by the reusability and exposure test.

Effects of Alkali Metal (Li, Na, and K) Incorporation in NH2⁻MIL125(Ti) on the Performance of CO2 Adsorption.

A series of titanium-based, metal⁻organic framework (MOF) materials, xM@NH2-MIL125(Ti) (x is the alkali metal loading percentage during the synthesis; M = Li, Na, K), have been synthesized solvothermally. Alkali metal doping in the NH2⁻MIL125(Ti) in situ solvothermal process demonstrated a vital modification of the material structure and surface morphology for the CO2 adsorption capacity at ambient conditions. By changing the reactants' precursor, including different kinds of alkali metal, the morphology of xM@NH2⁻MIL125(Ti) can be adjusted from a tetragonal plate through a circular plate to a truncated octahedron. The variation of the alkali metal loading results in substantial differences in the CO2 adsorption. The properties of xM@NH2⁻MIL125(Ti) were evaluated via functional group coordination using FT-IR, phase identification based on X-ray diffraction (XRD), surface morphology through scanning electron microscopy (SEM), as well as N2 and CO2 adsorption by physical gas adsorption analysis. This work reveals a new pathway to the modification of MOF materials for high-efficiency CO2 adsorption.

Novel polythiophene derivative for dual-channel cell imaging.

Fluorescent materials play an extremely important role in understanding the microbiological world. New fluorescent materials which have good photophysical properties, low cytotoxicity, and multi-channel fluorescent imaging capability are still urgently needed, even though many kinds of fluorescent materials have already been synthesized. In this work, a new polythiophene derivative (PT-OH-PPR) modified with a porphyrin group in its side chain was designed and fabricated through FeCl3 oxidative polymerization. The obtained PT-OH-PPR has wide absorption and emission spectral range, good water solubility and low cytotoxicity. Importantly it could be enriched in the cytoplasm of A549 cells and be excited by two excitation wavelengths (488 nm and 559 nm), which provides a promising application in dual-channel cell imaging.

Micelle carriers based on macrogol 15 hydroxystearate for ocular delivery of terbinafine hydrochloride: In vitro characterization and in vivo permeation.

Non-ionic surfactant micelles are helpful for improving the diffusion of topically delivered drugs through the cornea. This study aimed to develop terbinafine hydrochloride (TH)-loaded micelles based on a soft non-ionic surfactant-macrogol 15 hydroxystearate (HS 15) and to investigate their in vivo cornea permeation. Briefly, 0.25% TH-loaded HS 15 micelles (TH-HNMs) were developed using a simple co-solvent method. Characterization of the TH-HNMs by Zetasizer and transmission electron microscopy (TEM) revealed that the spherical and discrete micellar droplets with a small size (13.22±0.73nm) and an electrically neutral surface (-2.15±0.39mV) were achieved. The drug entrapment efficiency of TH-HNMs was almost 100%. The release of TH from the micelles was pH dependent. 93.2±3.4% of encapsulated TH was released from the micelles in the PBS at pH5.0 within 6h, but only 0.122±0.020% of encapsulated TH was released in the PBS at pH7.4 within the same release time. TH-HNMs possessed good physical stability in the pH neutral medium (pH7.0).No obvious irritations were observed in rabbit eyes after ocular instillation of TH-HNMs. The in vivo corneal permeation study revealed that the TH-HNMs can penetrate into the corneal epithelium quickly and efficiently in mouse eyes. Good permeability was also noted in the stroma of mouse corneas with de-epithelialization. Compared with the TH oily solution, TH-HNMs delivered considerably increased levels of TH into rabbit corneas with or without de-epithelialization. In conclusion, the easily prepared, small, physically stable and biocompatible TH-HNMs with good ocular bioavailability hold great promise as an efficient carrier for topical ocular delivery of TH.

Positively charged micelles based on a triblock copolymer demonstrate enhanced corneal penetration.

PURPOSE: The cornea is a main barrier to drug penetration after topical application. The aim of this study was to evaluate the abilities of micelles generated from a positively charged triblock copolymer to penetrate the cornea after topical application. METHODS: The triblock copolymer poly(ethylene glycol)-poly(ε-caprolactone)-g-polyethyleneimine was synthesized, and the physicochemical properties of the self-assembled polymeric micelles were investigated, including hydrodynamic size, zeta potential, morphology, drug-loading content, drug-loading efficiency, and in vitro drug release. Using fluorescein diacetate as a model drug, the penetration capabilities of the polymeric micelles were monitored in vivo using a two-photon scanning fluorescence microscopy on murine corneas after topical application. RESULTS: The polymer was successfully synthesized and confirmed using nuclear magnetic resonance and Fourier transform infrared. The polymeric micelles had an average particle size of 28 nm, a zeta potential of approximately +12 mV, and a spherical morphology. The drug-loading efficiency and drug-loading content were 75.37% and 3.47%, respectively, which indicates that the polymeric micelles possess a high drug-loading capacity. The polymeric micelles also exhibited controlled-release behavior in vitro. Compared to the control, the positively charged polymeric micelles significantly penetrated through the cornea. CONCLUSION: Positively charged micelles generated from a triblock copolymer are a promising vehicle for the topical delivery of hydrophobic agents in ocular applications.

[Studies on association of HSL repeat polymorphism and aerobic endurance].

OBJECTIVE: To investigate the relationship between hormone sensitive lipase (HSL) gene polymorphism and aerobic endurance. METHODS: The (CA)n repeats polymorphism genotypes in HSL intro 6 of 123 outstanding long distance runners and 127 controls of Han nationality in northern China were analyzed by PCR and Fluorescence labeled STR-genescan. Repeat polymorphisms were grouped according to segmentation point and alleles were divided into long or short chains. Chi-square test was used to analyze the frequency difference of allelic and genotypic between athlete and control groups. RESULTS: (CA) n repeats polymorphism in HSL gene was total of 9 different repeat number of alleles, which composed of 25 different genotypes. The chi-square test result showed that when compared short and long chain alleles split by 4, there was a significant difference (P <0.05) of genotype distribution in 5/10 km group compared with control. Compared the rest groups with control, there was no significant difference. CONCLUSION: Compared short and long chain alleles split by 4, the LL genotype of (CA)n of HSL was associated with aerobic endurance and it might be a molecular marker of elite 5/10 km long distance runners.

Dansyl-labeled anionic amphiphile with a hexadecanoic carbon chain: synthesis and detection for shape transitions in organized molecular assemblies.

The probing properties of a new fluorophore-labeled anionic surfactant, sodium 16-(N-dansyl)aminocetylate (16-DAN-ACA) were investigated systematically in molecular assemblies, especially in the transitions between micelles and vesicles. 16-DAN-ACA can efficiently differentiate the two different aggregate types in mixed cationic and anionic surfactant systems. The fluorescence anisotropy of 16-DAN-ACA was found to be sensitive for directly detecting the micellar growth in micelles containing oppositely charged surfactants; both cationic cetyltrimethylammonium bromide (CTAB) systems and anionic sodium dodecyl sulfate (SDS) systems were studied. The results indicated that the 16-DAN-ACA is a good fluorescent probe for differentiating the different aggregates, and even more can be used to detect the micellar growth.

Ocular penetration and pharmacokinetics of topical clarithromycin eye drops to rabbits.

PURPOSE: To evaluate the ocular pharmacokinetics of clarithromycin (CLA) eye drops topically applied to the corneas of rabbits. METHODS: One 50-µL drop of CLA (0.25%) was administered to each New Zealand white rabbit in a single dose group, and one 50-µL drop of CLA was administered 6 times at 5-min intervals to each rabbit in a loading dose group. The effect of debridement on corneal penetration was also investigated in a de-epithelium group. The drug concentrations in the cornea and aqueous humor (AH) were assayed using high-performance liquid chromatography with tandem mass spectrometry (HPLC-MS/MS) analysis. RESULTS: Maximum CLA levels were achieved in the corneas and AH at 15 and 60 min, respectively, in the intact epithelium eyes in the single dose group (24.54±10.64 µg/g and 0.78±0.22 µg/mL, respectively, mean±the standard error of the mean, n=8). In the loading dose group, 30 min after the last application, the CLA level in the corneas reached 92.26±17.62 µg/g. In the loading dose group, the drug levels in the corneas and AH were significantly increased compared with the drug levels in the corneas with the intact epithelium and de-epithelium eyes in the single dose group at the corresponding time points (P<0.05). The estimated CLA half-lives in the corneas and AH for the intact eyes were 103.28 and 132.61 min, respectively. CONCLUSION: Therapeutic CLA levels can be achieved in rabbit corneas after topically applying the drug with eye drops.

Fluorescent film sensor for copper ion based on an assembled monolayer of pyrene moieties.

We previously reported the construction of a family of fluorescent film sensors for organic copper salts by covalently coupling polycyclic aromatic hydrocarbons on epoxy-terminated self-assembled monolayers on glass plate surfaces. Here we investigate the sensing properties and mechanism of covalently coupling pyrene on a glass plate surface via a long flexible "Y" type spacer. X-ray photoelectron spectroscopy (XPS) and fluorescence spectra measurements demonstrate the covalent attachment of pyrene in our adlayer. Compared with those results obtained in the previous studies, this new film sensor did not show highly selectivity for organic copper salts, which can be attributed to the introduction of sulfonyl groups connecting the pyrene moieties and the spacers. The presence of sulfonyl units made the microenvironments of pyrene relatively hydrophilic and thus showed less screening effect for inorganic ions. The specificity and reversibility of the film sensor toward Cu (II) made it attractive for sensing applications.