Development of a two-layer dense-pixel LYSO Compton camera prototype for prompt gamma imaging.

Objective.Lutetium-yttrium orthosilicate (LYSO)-based Compton camera (CC) has been proposed for prompt gamma imaging due to its high detection efficiency and position resolution. However, very few LYSO CC prototypes have been built and used for practical evaluation. In this study, we built a lightweight dense-pixel silicon photomultiplier-based two-layer LYSO CC prototype for future prompt gamma imaging.Approach.We attempt the first-ever effort to use the double-encoding with the thick light guide and coding circuit structure for 46 × 46 dense-pixel LYSO detectors construction and use pixel segmentation based on centroid mapping to obtain 4232 spectral calibrations. We also present a framework for list-mode projection data acquisition based on the decoding of the time series data obtained by data acquisition card in this study. Finally, the standard source calibration, ring-like22Na source with non-uniform intensity, and mixed point-like source with a wide energy spectrum experiments were implemented to evaluate the resolution metrics and imaging performance of the prototype.Main results.The lateral position resolution of the prototype was 1 mm, and the maximum measurement deviation is 2.5 mm and 5 mm in the depth direction for the scatterer and absorber, respectively. In the experiments, the measured energy resolution was 9.63% @ 1.33 MeV for the scatterer and 10.8% @ 1.33 MeV for the absorber. And the detection efficiency of the prototype for a spherical60Co source with a diameter of 2.8 mm at 10 cm far was 5.7 × 10-3@ 1.33 MeV and the full width at half maximum of the reconstruction was 5.5 mm. Besides, the spatial position offset within 2 mm of the radioactive source at 10 cm can be distinguished.Signification.The developed two-layer dense-pixel LYSO CC contributes to incorporating Compton imaging techniques for prompt gamma detection and multiple energy sources into nuclear medical imaging.

Technical note: Rapid and high-resolution deep learning-based radiopharmaceutical imaging with 3D-CZT Compton camera and sparse projection data.

BACKGROUND: The Compton camera (CC) has great potential in nuclear medicine imaging due to the high detection efficiency and the ability to simultaneously detect multi-energy radioactive sources. However, the finite resolution of the detectors will degrade the images that the real-world CC can obtain. Besides, the CC sometimes can be limited by the detection efficiency, leading to difficulty in using sparse projection data to realize high-resolution reconstruction with short-time measurement, which limits its clinical application for real-time or rapid radiopharmaceutical imaging. PURPOSE: To overcome the difficulty and promote the usage of the CC in radiopharmaceutical imaging, we present a deep learning (DL)-based CC reconstruction method to realize rapid and high-resolution imaging with short-time measurement. METHODS: We developed a DL-based algorithm MCBP-CCnet via Monte Carlo sampling-based back projection and a dedicated convolutional neural network, called CC-Net, to realize the rapid and high-resolution reconstruction with sparse projection data. A CC prototype based on a single three-dimensional position-sensitive CdZnTe (3D-CZT) detector was used to demonstrate the feasibility of our proposed method. The simulations and experiments of radiopharmaceutical imaging used the 3D-CZT CC and [18 F]NaF. A 3D-printing mouse phantom was also further used to evaluate the performance of the proposed method in animal molecular imaging. RESULTS: The simulation and experimental results showed that the proposed method could realize the images reconstruction within 5 s for list-mode projection data and realized a rapid reconstruction within 35 s for experimental radiopharmaceutical imaging based on the 3D-printing mouse phantom, as well as realized the high-resolution imaging with an accuracy of within 0.78 mm in terms of the sparse projection data that only contained hundreds of events. Besides, the deviations between the reconstructed radiative activities and the exact values were less than 1.51%. CONCLUSION: The results demonstrated that the proposed method could realize the rapid and high-resolution CC reconstruction with sparse projection data obtained by the 3D-CZT CC and realize the high-resolution radiopharmaceutical imaging. The study in this paper also demonstrated the potential and feasibility of future applications of a 3D-CZT CC for real-time high-resolution radiopharmaceutical imaging with short-time measurement.

Dual-domain sparse-view CT reconstruction with Transformers.

PURPOSE: Computed Tomography (CT) has been widely used in the medical field. Sparse-view CT is an effective and feasible method to reduce the radiation dose. However, the conventional filtered back projection (FBP) algorithm will suffer from severe artifacts in sparse-view CT. Iterative reconstruction algorithms have been adopted to remove artifacts, but they are time-consuming due to repeated projection and back projection and may cause blocky effects. To overcome the difficulty in sparse-view CT, we proposed a dual-domain sparse-view CT algorithm CT Transformer (CTTR) and paid attention to sinogram information. METHODS: CTTR treats sinograms as sentences and enhances reconstructed images with sinogram's characteristics. We qualitatively evaluate the CTTR, an iterative method TVM-POCS, a convolutional neural network based method FBPConvNet in terms of a reduction in artifacts and a preservation of details. Besides, we also quantitatively evaluate these methods in terms of RMSE, PSNR and SSIM. RESULTS: We evaluate our method on the Lung Image Database Consortium image collection with different numbers of projection views and noise levels. Experiment studies show that, compared with other methods, CTTR can reduce more artifacts and preserve more details on various scenarios. Specifically, CTTR improves the FBPConvNet performance of PSNR by 0.76dB with 30 projections. CONCLUSIONS: The performance of our proposed CTTR is better than the method based on CNN in the case of extremely sparse views both on visual results and quantitative evaluation. Our proposed method provides a new idea for the application of Transformers to CT image processing.

U-net-based blocked artifacts removal method for dynamic computed tomography.

Airplane engines are vital aircraft components, so regular inspections of the engines are required to ensure their stable operation. A dynamic computed tomography (CT) system has been proposed by our group for in situ nondestructive testing of airplane engines, which takes advantage of the rotor's self-rotation. However, static parts of the engines cause blocked artifacts in the reconstructed image, leading to misinterpretations of the condition of engines. In this paper, in order to remove the artifacts produced by the projection of the static parts in CT reconstruction, two deep-learning-based methods are proposed, which use U-Net to perform correction in the projection domain. The projection of static parts can be estimated by a well-trained U-Net and subsequently can be subtracted from the projections of the engine. Finally, the rotor can be reconstructed from the corrected projections. The results shown in this paper indicate that the proposed methods are practical and effective for removing those blocked artifacts and recovering the details of rotating parts, which will, in turn, maximize the utilization of the dynamic CT system for in situ engine tests.

Compton-based prompt gamma imaging using ordered origin ensemble algorithm with resolution recovery in proton therapy.

Prompt gamma ray (PG) imaging based on Compton camera (CC) is promising to realize in vivo verification during the proton therapy. However, the finite spatial and energy resolution of current CC, as well as the Doppler broaden effect, degrade the quality and resolution of PG images. In addition, due to the inherent geometrical complexity of Compton camera data, PG imaging can be time-consuming and difficult to reconstruct in real-time, while using standard techniques such as filtered back-projection or maximum likelihood-expectation maximization. In this paper, we propose three modifications of origin ensembles with resolution recovery (OE-RR) algorithm based on Markov chains to accelerate the convergence to equilibrium of OE-RR algorithm and improve the image quality. For evaluation, we performed a Monte Carlo simulation of a three-stage CZT Compton camera with resolution loss to detect the PG produced by a proton beam in a water phantom, and evaluate image quality of the gamma rays emitted during proton irradiation. The results show that our ordered OE-RR algorithm realized a good resolution recovery and accurate estimation of the position, including the peak and the distal falloff of the PG emission with remarkably faster reconstruction, thus demonstrating the feasibility of this new method in non-idealized PG-based proton range verification.

Few-View Prereconstruction Guided Tube Current Modulation Strategy Based on the Signal-to-Noise Ratio of the Sinogram.

The radiation dose reduction without sacrificing the image quality as an important issue has raised the attention of CT manufacturers and different automatic exposure control (AEC) strategies have been adopted in their products. In this paper, we focus on the strategy of tube current modulation. It is deduced based on the signal-to-noise (SNR) of the sinogram. The main idea behind the proposed modulation strategy is to keep the SNR of the sinogram proximately invariable using the few-view reconstruction as a good reference because it directly affects the noise level of the reconstructions. The numerical experiment results demonstrate that, compared with constant tube current, the noise distribution is more uniform and the SNR and CNR of the reconstruction are better when the proposed strategy is applied. Furthermore it has the potential to distinguish the low-contrast target and to reduce the radiation dose.

In-line phase-contrast imaging based on Tsinghua Thomson scattering x-ray source.

Thomson scattering x-ray sources can produce ultrashort, energy tunable x-ray pulses characterized by high brightness, quasi-monochromatic, and high spatial coherence, which make it an ideal source for in-line phase-contrast imaging. We demonstrate the capacity of in-line phase-contrast imaging based on Tsinghua Thomson scattering X-ray source. Clear edge enhancement effect has been observed in the experiment.

Improve spatial resolution by Modeling Finite Focal Spot (MFFS) for industrial CT reconstruction.

The finite focal spot is one of the major limitations of the high spatial resolution CT, especially to the high-energy industrial CT system with a macro-focus x-ray source. In this paper, we propose an efficient reconstruction framework through finite focal spot size based projection modeling to improve the spatial resolution of current industrial CT system, and demonstrate the superior performance of this method. First of all, the blurred projection produced by a finite size source is modeled as the integral ideal projection of a given point source over the finite focal spot support. Under the model discretization, the approximate linear equivalence relation between the actual finite focus model and the ideal point source model is established. Then a projection recovery method with this relationship is presented to recover the projection of the finer focal spot from the blurred projection. Finally, a high-spatial resolution image can be reconstructed from the recovered projections using the standard Filtered Back-Projection (FBP) algorithm. Furthermore the noise in the reconstructed image with different model parameters is studied and a difference image based fusion method is presented for the further suppression of the noise caused by the projection analysis processing. Both numerical simulations and real experiments have shown that the proposed reconstruction framework with the outstanding performance and efficiency characteristics can significantly enhance the spatial resolutions of current high-energy industrial CT systems.

A few-view reweighted sparsity hunting (FRESH) method for CT image reconstruction.

In recent years, the total variation (TV) minimization method has been widely used for compressed sensing (CS) based CT image reconstruction. In this paper, we propose a few-view reweighted sparsity hunting (FRESH) method for CT image reconstruction, and demonstrate the superior performance of this method. Specifically, the key of the purposed method is that a reweighted total variation (RwTV) measure is used to characterize image sparsity in the cost function, outperforming the conventional TV counterpart. To solve the RwTV minimization problem efficiently, the Split-Bregman method and other state-of-the-art L1 optimization methods are compared. Inspired by the fast iterative shrinkage/thresholding algorithm (FISTA), a predication step is incorporated for fast computation in the Split-Bregman framework. Extensive numerical experiments have shown that our FRESH approach performs significantly better than competing algorithms in terms of image quality and convergence speed for few-view CT. High-quality images were reconstructed by our FRESH method after 250 iterations using only 15 few-view projections of the Forbild head phantom while other competitors needed more than 800 iterations. Remarkable improvements in details in the experimental evaluation using actual sheep thorax data further indicate the potential real-world application of the FRESH method.