BiVO4-Based Heterojunction Photocathode for High-Performance Photoelectrochemical Hydrogen Peroxide Production.

Photoelectrochemical (PEC) cells provide a promising solution for the synthesis of hydrogen peroxide (H2O2). Herein, an integrated photocathode of p-type BiVO4 (p-BVO) array with tetragonal zircon structure coupled with different metal oxide (MOx, M = Sn, Ti, Ni, and Zn) heterostructure and NiNC cocatalyst (p-BVO/MOx/NiNC) was synthesized for the PEC oxygen reduction reaction (ORR) in production of H2O2. The p-BVO/SnO2/NiNC array achieves the production rate 65.46 µmol L-1 h-1 of H2O2 with a Faraday efficiency (FE) of 76.12%. Combined with the H2O2 generation of water oxidation from the n-type Mo-doped BiVO4 (n-Mo:BVO) photoanode, the unbiased photoelectrochemical cell composed of a p-BVO/SnO2/NiNC photocathode and n-Mo:BVO photoanode achieves a total FE of 97.67% for H2O2 generation. The large area BiVO4-based tandem cell of 3 × 3 cm2 can reach a total H2O2 production yield of 338.84 µmol L-1. This work paves the way for the rational design and fabrication of artificial photosynthetic cells for the production of liquid solar fuel.

MircoRNA-25-3p in skin precursor cell-induced Schwann cell-derived extracellular vesicles promotes axon regeneration by targeting Tgif1.

Nerve injury often leads to severe dysfunction because of the lack of axon regeneration in adult mammal. Intriguingly a series of extracellular vesicles (EVs) have the obvious ability to accelerate the nerve repair. However, the detailed molecular mechanisms to describe that EVs switch neuron from a transmitter to a regenerative state have not been elucidated. This study elucidated the microRNA (miRNA) expression profiles of two types of EVs that promote nerve regeneration. The functions of these miRNAs were screened in vitro. Among the 12 overlapping miRNAs, miR-25-3p was selected for further analysis as it markedly promoted axon regeneration both in vivo and in vitro. Furthermore, knockdown experiments confirmed that PTEN and Klf4, which are the major inhibitors of axon regeneration, were the direct targets of miR-25-3p in dorsal root ganglion (DRG) neurons. The utilization of luciferase reporter assays and functional tests provided evidence that miR-25-3p enhances axon regeneration by targeting Tgif1. Additionally, miR-25-3p upregulated the phosphorylation of Erk. Furthermore, Rapamycin modulated the expression of miR-25-3p in DRG neurons. Finally, the pro-axon regeneration effects of EVs were confirmed by overexpressing miR-25-3p and Tgif1 knockdown in the optic nerve crush model. Thus, the enrichment of miR-25-3p in EVs suggests that it regulates axon regeneration, proving a potential cell-free treatment strategy for nerve injury.

Plant and microbial response in constructed wetland treating tetracycline antibiotic polluted water: Evaluating the effects of microplastic size and concentration.

Microplastics (MPs) and antibiotics are novel water pollutants that have attracted increasing attention. Constructed wetlands (CWs) are widely applied treating various types of polluted water. How these two new pollutants affect plants and microorganisms in CWs, especially deciphering the unknown roles of MPs size and concentration, is of great essential. Here, five CW treatments with submerged macrophyte Myriophyllum aquaticum were established to treat oxytetracycline (OTC) antibiotic-polluted water. The effects of polystyrene (PS) nanoplastics (NPs) (700 nm) and MPs (90-110 µm) on plant and microbial communities at 10 µg/L and 1 mg/L, respectively, were systematically evaluated. PS reduced the nitrogen and phosphorus removal efficiencies and inhibited OTC removal. Low doses (10 µg/L) of NPs and high doses (1 mg/L) of MPs had the greatest effects on plant and microbial responses. The overall effect of MPs was greater than that of NPs. Compared with high NPs concentration (1 mg/L), low concentrations (10 µg/L) had higher catalase (CAT), superoxide dismutase (SOD), and malondialdehyde (MDA) content. However, the activity and content of MPs at low concentrations (10 µg/L) were lower than those at high concentrations (1 mg/L). The coexistence of OTC and MPs/NPs decreased the microbial diversity and abundance. Low doses of NPs and high doses of MPs decreased the relative abundance of Abditibacteriota, Deinococccota, and Zixibacteria. Redundancy and network analyses revealed a strong correlation between pollutant removal and plant and microbial responses. NH4+-N and OTC removal was positively and negatively correlated with CAT, SOD, and MDA content, respectively. MDA positively correlated to chlorophyll content, whereas SOD showed a negative correlation with Chloroflexi. This study highlighted the scale effect of MPs in wastewater treatment via CWs. It enhances our understanding of the response of plants and microorganisms to the remediation of water co-polluted with MPs and antibiotics.

Engineering Surface Passivation and Hole Transport Layer on Hematite Photoanodes Enabling Robust Photoelectrocatalytic Water Oxidation.

Regulation of charge transport at the molecular level is essential to elucidating the kinetics of junction photoelectrodes across the heterointerface for photoelectrochemical (PEC) water oxidation. Herein, an integrated photoanode as the prototype was constructed by use of a 5,10,15,20-tetrakis(4-carboxyphenyl) porphyrin-cobalt molecule (CoTCPP) and ZnO on hematite (α-Fe2O3) photoanode. CoTCPP molecules serve as a typical hole transport layer (HTL), accelerating the transport of the photogenerated holes to oxygen evolution cocatalysts (OECs). Meanwhile, ZnO as the surface passivation layer (SPL) can passivate the interfacial state and reduce the level of electron leakage from hematite into the electrolyte. After the integration of OECs, the state-of-the-art α-Fe2O3/ZnO/CoTCPP/OECs photoanode exhibits a distinguished photocurrent density and excellent stability in comparison with pristine α-Fe2O3. The simultaneous incorporation of a ZnO and CoTCPP dual interlayer can effectively modulate the interfacial photoinduced charge transfer for PEC reaction. This work provides in-depth insights into interfacial charge transfer across junction electrodes and identifies the critical roles of solar PEC conversion.

RNA sequencing of exosomes secreted by fibroblast and Schwann cells elucidates mechanisms underlying peripheral nerve regeneration.

JOURNAL/nrgr/04.03/01300535-202408000-00035/figure1/v/2023-12-16T180322Z/r/image-tiff Exosomes exhibit complex biological functions and mediate a variety of biological processes, such as promoting axonal regeneration and functional recovery after injury. Long non-coding RNAs (lncRNAs) have been reported to play a crucial role in axonal regeneration. However, the role of the lncRNA-microRNA-messenger RNA (mRNA)-competitive endogenous RNA (ceRNA) network in exosome-mediated axonal regeneration remains unclear. In this study, we performed RNA transcriptome sequencing analysis to assess mRNA expression patterns in exosomes produced by cultured fibroblasts (FC-EXOs) and Schwann cells (SC-EXOs). Differential gene expression analysis, Gene Ontology analysis, Kyoto Encyclopedia of Genes and Genomes analysis, and protein-protein interaction network analysis were used to explore the functions and related pathways of RNAs isolated from FC-EXOs and SC-EXOs. We found that the ribosome-related central gene Rps5 was enriched in FC-EXOs and SC-EXOs, which suggests that it may promote axonal regeneration. In addition, using the miRWalk and Starbase prediction databases, we constructed a regulatory network of ceRNAs targeting Rps5, including 27 microRNAs and five lncRNAs. The ceRNA regulatory network, which included Ftx and Miat, revealed that exsosome-derived Rps5 inhibits scar formation and promotes axonal regeneration and functional recovery after nerve injury. Our findings suggest that exosomes derived from fibroblast and Schwann cells could be used to treat injuries of peripheral nervous system.

Sustainable Coating Based on Zwitterionic Functionalized Polyurushiol with Antifouling and Antibacterial Properties.

Zwitterionic polymer coatings facilitate the formation of hydration layers via electrostatic interactions on their surfaces and have demonstrated efficacy in preventing biofouling. They have emerged as a promising class of marine antifouling materials. However, designing multifunctional, environmentally friendly, and natural products-derived zwitterionic polymer coatings that simultaneously resist biofouling, inhibit protein adhesion, exhibit strong antibacterial properties, and reduce algal adhesion is a significant challenge. This study employed two diisocyanates as crosslinkers and natural urushiol and ethanolamine as raw materials. The coupling reaction of diisocyanates with hydroxyl groups was employed to synthesize urushiol-based precursors. Subsequently, sulfobetaine moieties were introduced into the urushiol-based precursors, developing two environmentally friendly and high-performance zwitterionic-functionalized polyurushiol antifouling coatings, denoted as HUDM-SB and IPUDM-SB. The sulfobetaine-functionalized polyurushiol coating exhibited significantly enhanced hydrophilicity, with the static water contact angle reduced to less than 60°, and demonstrated excellent resistance to protein adhesion. IPUDM-SB exhibited antibacterial efficacy up to 99.9% against common Gram-negative bacteria (E. coli and V. alginolyticus) and Gram-positive bacteria (S. aureus and Bacillus. sp.). HUDM-SB achieved antibacterial efficacy exceeding 95.0% against four bacterial species. Furthermore, the sulfobetaine moieties on the surfaces of the IPUDM-SB and HUDM-SB coatings effectively inhibited the growth and reproduction of algal cells by preventing microalgae adhesion. This zwitterionic-functionalized polyurushiol coating does not contain antifouling agents, making it a green, environmentally friendly, and high-performance biomaterial-based solution for marine antifouling.

PRICKLE1 gene methylation and abnormal transcription in Chinese patients with ankylosing spondylitis.

BACKGROUND: Ankylosing spondylitis (AS) is a common inflammatory arthritis without a reliable biomarker. The role of methylation and mRNA expression of PRICKLE1 promoter in the pathogenesis of ankylosing spondylitis remains unclear. METHODS: A two-stage case-control design was used to detect the characteristics of methyl group and transcriptome of PRICKLE1 gene in Ankylosing spondylitis. The methylation degree of PRICKLE1 gene promoter region was tested by phosphate-sequencing, and further analyzed whether there was significant difference in methylation level of PRICKLE1 gene. The expression levels of PRICKLE1 mRNA in 50 AS patients and 50 healthy controls were detected by real-time quantitative PCR (RT-qPCR). RESULTS: Compared with healthy control group, the intensity of methylation in 4 ponds of PRICKLE1 in patients with Ankylosing spondylitis was low, and the mRNA levels were overexpressed (P = 0.017). ROC results showed that the sensitivity of PRICKLE1 was 68.67% and specificity was 71.43%. CONCLUSION: There is a significant change in the concentration of serum PRICKLE1 mRNA​in patients with Ankylosing spondylitis, and the degree of gene methylation is significantly reduced, suggesting that PRICKLE1 gene maybe involved in the pathogenesis of Ankylosing spondylitis, which may be useful for predicting the occurrence of AS and finding new early screening indicators.

Single-cell RNA sequencing analysis of the temporomandibular joint condyle in 3 and 4-month-old human embryos.

BACKGROUND: The temporomandibular joint (TMJ) is a complex joint consisting of the condyle, the temporal articular surface, and the articular disc. Functions such as mastication, swallowing and articulation are accomplished by the movements of the TMJ. To date, the TMJ has been studied more extensively, but the types of TMJ cells, their differentiation, and their interrelationship during growth and development are still unclear and the study of the TMJ is limited. The aim of this study was to establish a molecular cellular atlas of the human embryonic temporomandibular joint condyle (TMJC) by single-cell RNA sequencing, which will contribute to understanding and solving clinical problems. RESULTS: Human embryos at 3 and 4 months of age are an important stage of TMJC development. We performed a comprehensive transcriptome analysis of TMJC tissue from human embryos at 3 and 4 months of age using single-cell RNA sequencing. A total of 16,624 cells were captured and the gene expression profiles of 15 cell clusters in human embryonic TMJC were determined, including 14 known cell types and one previously unknown cell type, "transition state cells (TSCs)". Immunofluorescence assays confirmed that TSCs are not the same cell cluster as mesenchymal stem cells (MSCs). Pseudotime trajectory and RNA velocity analysis revealed that MSCs transformed into TSCs, which further differentiated into osteoblasts, hypertrophic chondrocytes and tenocytes. In addition, chondrocytes (CYTL1high + THBS1high) from secondary cartilage were detected only in 4-month-old human embryonic TMJC. CONCLUSIONS: Our study provides an atlas of differentiation stages of human embryonic TMJC tissue cells, which will contribute to an in-depth understanding of the pathophysiology of the TMJC tissue repair process and ultimately help to solve clinical problems.

3D Strain Measurement of Heterostructures Using the Scanning Transmission Electron Microscopy Moiré Depth Sectioning Method.

The mechanical properties of micro- and nanoscale materials directly determine the reliability of heterostructures, microstructures, and microdevices. Therefore, an accurate evaluation of the 3D strain field at the nanoscale is important. In this study, a scanning transmission electron microscopy (STEM) moiré depth sectioning method is proposed. By optimizing the scanning parameters of electron probes at different depths of the material, the sequence STEM moiré fringes (STEM-MFs) with a large field of view, which can be hundreds of nanometers obtained. Then, the 3D STEM moiré information constructed. To some extent, multi-scale 3D strain field measurements from nanometer to the submicrometer scale actualized. The 3D strain field near the heterostructure interface and single dislocation accurately measured by the developed method.

Metal-Organic Framework Glass Catalysts from Melting Glass-Forming Cobalt-Based Zeolitic Imidazolate Framework for Boosting Photoelectrochemical Water Oxidation.

Sluggish oxygen evolution kinetics and serious charge recombination restrict the development of photoelectrochemical (PEC) water splitting. The advancement of novel metal-organic frameworks (MOFs) catalysts bears practical significance for improving PEC water splitting performance. Herein, a MOF glass catalyst through melting glass-forming cobalt-based zeolitic imidazolate framework (Co-ag ZIF-62) was introduced on various metal oxide (MO: Fe2 O3 , WO3 and BiVO4 ) semiconductor substrates coupled with NiO hole transport layer, constructing the integrated Co-ag ZIF-62/NiO/MO photoanodes. Owing to the excellent conductivity, stability and open active sites of MOF glass, Co-ag ZIF-62/NiO/MO photoanodes exhibit a significantly enhanced photoelectrochemical water oxidation activity and stability in comparison to pristine MO photoanodes. From experimental analyses and density functional theory calculations, Co-ag ZIF-62 can effectively promote charge transfer and separation, improve carrier mobility, accelerate the kinetics of oxygen evolution reaction (OER), and thus improve PEC performance. This MOF glass not only serves as an excellent OER cocatalyst on tunable photoelectrodes, but also enables promising opportunities for PEC devices for solar energy conversion.

Enhanced nitrogen removal via biochar-mediated nitrification, denitrification, and electron transfer in constructed wetland microcosms.

This study investigated the effect of biochar on real domestic wastewater treatment by constructed wetlands (CWs). To evaluate the role of biochar as a substrate and electron transfer medium on nitrogen transformation, three treatments of CW microcosms were established: conventional substrate (T1), biochar substrate (T2), and biochar-mediated electron transfer (T3). Nitrogen removal increased from 74% in T1 to 77.4% in T2 and 82.1% in T3. Nitrate generation increased in T2 (up to 2 mg/L) but decreased in T3 (lower than 0.8 mg/L), and the nitrification genes (amoA, Hao, and nxrA) in T2 and T3 increased by 132-164% and 129-217%, respectively, compared with T1 (1.56 × 104- 2.34 × 107 copies/g). The nitrifying Nitrosomonas, denitrifying Dechloromonas, and denitrification genes (narL, nirK, norC, and nosZ) in the anode and cathode of T3 were significantly higher than those of the other treatments (increased by 60-fold, 35-fold, and 19-38%). The genus Geobacter, related to electron transfer, increased in T3 (by 48-fold), and stable voltage (~150 mV) and power density (~9 uW/m2) were achieved. These results highlight the biochar-mediated enhancement of nitrogen removal in constructed wetlands via nitrification, denitrification, and electron transfer, and provide a promising approach for enhanced nitrogen removal by constructed wetland technology.

Particle sorting to improve the removal of fluoride and aluminum nitride from secondary aluminum dross by roasting.

It is important to remove active substances from secondary aluminum dross (SAD) to meet the reuse of SAD. In this work, the removal of active substances from different particle sizes of SAD was studied using roasting improvement with particle sorting. The results showed that roasting after particle sorting pretreatment can effectively remove fluoride and aluminum nitride (AlN) from SAD, while getting the high-grade alumina (Al2O3) crude materials. The active substances of SAD mainly contribute to AlN, aluminum carbide (Al4C3), and soluble fluoride ions. AlN and Al3C4 mainly exist in particles of 0.05-0.1 mm, while Al and fluoride are mainly in particles of 0.1-0.2 mm. The SAD of particle size ranging 0.1-0.2 mm has high activity and leaching toxicity; the gas emission was reached 50.9 mL/g (limit value of 4 mL/g), and the fluoride ion concentration in the literature was 137.62 mg/L (limit value of 100 mg/L) during the identification for reactivity and leaching toxicity according to GB5085.5-2007 and GB5085.3-2007, respectively. Roasting at 1000 °C for 90 min, the active substances of SAD were converted to Al2O3, N2, and CO2; meanwhile, soluble fluoride converted to stable CaF2. The final gas release was reduced to 2.01 mL/g while soluble fluoride from SAD residues was reduced to 6.16 mg/L, respectively. The Al2O3 content of SAD residues was determined at 91.8% and has been classified as category I solid waste. The results suggested that the roasting improvement with particle sorting of SAD can meet the reuse of valuable materials at full scale.

Development and validation of a risk prediction model for diabetic retinopathy in type 2 diabetic patients.

To establish a risk prediction model and make individualized assessment for the susceptible diabetic retinopathy (DR) population in type 2 diabetic mellitus (T2DM) patients. According to the retrieval strategy, inclusion and exclusion criteria, the relevant meta-analyses on DR risk factors were searched and evaluated. The pooled odds ratio (OR) or relative risk (RR) of each risk factor was obtained and calculated for ß coefficients using logistic regression (LR) model. Besides, an electronic patient-reported outcome questionnaire was developed and 60 cases of DR and non-DR T2DM patients were investigated to validate the developed model. Receiver operating characteristic curve (ROC) was drawn to verify the prediction accuracy of the model. After retrieving, eight meta-analyses with a total of 15,654 cases and 12 risk factors associated with the onset of DR in T2DM, including weight loss surgery, myopia, lipid-lowing drugs, intensive glucose control, course of T2DM, glycated hemoglobin (HbA1c), fasting plasma glucose, hypertension, gender, insulin treatment, residence, and smoking were included for LR modeling. These factors, followed by the respective ß coefficient was bariatric surgery (- 0.942), myopia (- 0.357), lipid-lowering drug follow-up < 3y (- 0.994), lipid-lowering drug follow-up > 3y (- 0.223), course of T2DM (0.174), HbA1c (0.372), fasting plasma glucose (0.223), insulin therapy (0.688), rural residence (0.199), smoking (- 0.083), hypertension (0.405), male (0.548), intensive glycemic control (- 0.400) with constant term α (- 0.949) in the constructed model. The area under receiver operating characteristic curve (AUC) of the model in the external validation was 0.912. An application was presented as an example of use. In conclusion, the risk prediction model of DR is developed, which makes individualized assessment for the susceptible DR population feasible and needs to be further verified with large sample size application.

[Component Properties and Heavy Metal Accumulation Characteristics of Contaminated Rice Straw Biochar During Oxygen-controlled Pyrolysis].

Pyrolysis is an important technology to achieve the harmlessness and recycling of contaminated biomass. In this study, the effects of oxygen-controlled atmosphere on the component properties and heavy metal accumulation characteristics of contaminated rice straw biochar were studied. The results showed that low-oxygen pyrolysis could effectively produce biochar using contaminated rice straw and improve the stability of heavy metals in biochar. Under the nitrogen atmosphere, the yield of rice straw biochar was 29.4%-34.9%. The aromatization index (SUVA254) of dissolved organic matter (DOM) increased first and then decreased with the increase in pyrolysis temperature, whereas the fluorescent components were mainly humic-like acid substances. Meanwhile, Ca mainly existed in the form of CaCO3 in biochar. Compared with the pure nitrogen condition, the biochar yield was reduced by 5.6%-13.5% and 14.9%-15.7% under the pyrolysis atmosphere containing 10% and 20% oxygen content, respectively. Ca existed in the form of CaO in biochar, which increased the pH value of the biochar by more than 0.5 units. The oxygen of the pyrolysis atmosphere accelerated the degradation of the lignin component, resulting in the gradual decrease in SUVA254 of DOM. With the increase in oxygen content in the pyrolysis atmosphere, humic-like acid substances in DOM were transformed into fulvic-like acid substances. Under the conditions of 400℃ and a 10% oxygen-containing atmosphere, the exchangeable fractions of Cu, Cd, Pb, Ni, and As in biochar were decreased by 5.2%, 3.7%, 1.7%, 0.8%, and 0.7%, respectively, indicating that heavy metals are transformed into more stable states. The results suggested that the higher biochar yield and heavy metal stability could be obtained by introducing a proper amount of nitrogen into the air (controlling the oxygen content of approximately 10%) for pyrolysis treatment of contaminated rice straw, providing an economic and feasible technology for the achievement of harmlessness and recovery of contaminated rice straw.

Experimental Study of As-Cast and Heat-Treated Single-Crystal Ni-Based Superalloy Interface Using TEM.

The interface plays an important role in determining strength and toughness in multiphase systems and the accurate measurement of the interface structure in single crystal (SX) Ni-based superalloy is also essential. In this work, the γ and γ' lattice constant, γ/γ' interface width at dendritic and interdendritic region of casting and solution treatment SX Ni-based superalloy is measured. Various advanced equipment is used to characterize γ/γ' interface nanostructure. A typical correlation between interface width and γ/γ' misfit is also summarized. The interface width in the dendritic region of the as-cast sample is larger than that in the interdendritic region. The misfit in the dendritic region is larger than that in the interdendritic region, which has a trend of negative development. There is a common law of the as-cast interdendritic and dendrite interface sample, where the absolute value of the misfit between the two phases is increasing with the phase interface broadening. The comparison of the as-cast and heat-treated interdendritic sample shows that after heat treatment, the phase interface width increases, the misfit decreases, the lattice constant of γ phase increases, and the lattice constant of the γ' phase decreases. By comparing the as-cast and heat treated dendrites, the absolute value of the misfit of the as-cast dendrite sample is significantly smaller than that of the heat-treated sample, and the misfit increases with the interface broadening. The comparison between interdendritic and dendritic heat-treated samples shows that the absolute value of the misfit between the two phases is smaller than that of the dendritic as-cast samples, and the absolute value of the misfit also increases with the phase interface broadening. In conclusion, property heat treatment can significantly increase the lattice constants of the γ and γ' phases, reduce the lattice mismatch at the interface of the two phases, and improve the high temperature stability of the alloy. A better understanding of the microstructure of Ni-based single crystal superalloys will provide guidance for the subsequent design of more advanced nickel-based single-crystal superalloys.

Spatial heterogeneity and source apportionment of soil metal(loid)s in an abandoned lead/zinc smelter.

Metal smelting have brought severe metal(loid)s contamination to the soil. Spatial distribution and pollution source analysis for soil metal(loid)s in an abandoned lead/zinc smelter were studied. The results showed that soil was contaminated heavily with metal(loid)s. The mean of lead (Pb), arsenic (As), cadmium (Cd), mercury (Hg) and antimony (Sb) content in topsoil is 9.7, 8.2, 5.0, 2.3, and 1.2 times higher than the risk screening value for soil contamination of development land of China (GB36600-2018), respectively. Cd is mainly enriched in the 0-6 m depth of site soil while As and Pb mainly deposited in the 0-4 m layer. The spatial distribution of soil metal(loid)s is significantly correlated with the pollution source in the different functional areas of smelter. As, Hg, Sb, Pb and copper (Cu) were mainly distributed in pyrometallurgical area, while Cd, thallium (Tl) and zinc (Zn) was mainly existed in both hydrometallurgical area and raw material storage area. Soil metal(loid)s pollution sources in the abandoned smelter are mainly contributed to the anthropogenic sources, accounting for 84.5%. Specifically, Pb, Tl, As, Hg, Sb and Cu mainly from atmospheric deposition (55.9%), Cd and Zn mainly from surface runoff (28.6%), While nickel (Ni) mainly comes from parent material (15.5%). The results clarified the spatial distribution and their sources in different functional areas of the smelter, providing a new thought for the risk prevention and control of metal(loid)s in polluted site soil.

Microwave-assisted recovery of lead from electrolytic manganese anode sludge using tartaric acid and NaOH.

In this study, a new metallurgical system for treating electrolytic manganese anode sludge by microwave roasting and alkaline leaching system was developed, and the lead leaching behaviour was studied. The XRD results show that Pb in anode sludge is mainly in the form of PbSO4 after microwave roasting at 850°C, as a result, the leaching rate of Pb is improved. The results show that the leaching rate of lead can reach 93.89% under the conditions of liquid-solid ratio of 7:1, leaching time of 30 min, leaching temperature of 40°C, and the concentration of sodium hydroxide of 8%. The addition of tartaric acid can further improve the lead leaching rate, FT-IR analysis showed that the coordination form of lead and tartaric acid. Lead and tartaric acid ions (L) form three coordination compounds, PbL, Pb2L2 and Pb2L3, which can only exist in alkaline solution.

DNA methylation and transcription of the FOXO3a gene are associated with ankylosing spondylitis.

To explore the association between methylation level and transcript level of Forkhead box O3a (FOXO3a) gene with ankylosing spondylitis (AS) susceptibility. Methylation levels of the FOXO3a promoter were measured in 84 AS patients and 83 healthy controls. A total of 77 patients and 66 healthy subjects were included in subsequent mRNA level testing. DNA methylation levels of 107 CpG sites on 6 CpG islands in the FOXO3a gene were investigated. This study indicated that CpG-4 and CpG-5 islands were markedly hypomethylated in AS patients. The methylation level of CpG-4 island in AS patients was negatively correlated with erythrocyte sedimentation rate (ESR), C-reactive protein (CRP), and Ankylosing Spondylitis Disease Activity Score (ASDAS). Moreover, FOXO3a mRNA levels were significantly decreased in AS patients and were obviously negatively correlated with the methylation levels of CpG-2 and CpG-5 islands in AS patients without treatment. The sensitivity and specificity of differential methylated CpG sites of FOXO3a were 74.7 and 85.4%, respectively. Besides, FOXO3a mRNA had a sensitivity of 80.0% and a specificity of 68.8%. DNA methylation and transcription of FOXO3a might be related to AS susceptibility and play a crucial role in the diagnosis of AS, but many open questions remain.

Contamination vertical distribution and key factors identification of metal(loid)s in site soil from an abandoned Pb/Zn smelter using machine learning.

Soil heterogeneity makes the vertical distribution of metal(loid)s in site soil vary considerably and poses a challenge for identifying the key factors of metal(loid)s migration in site soil profiles. In this study, a machine learning (ML) model was developed to study a typical abandoned Pb/Zn smelter using 267 site soils from 46 drilling points. Results showed that a well-trained ML model could be used to identify the key factors in determining the contamination vertical distribution and predict the metal(loid)s contents in subsurface soil. As, Cd, Pb, and Zn were the primary pollutants and their vertical migration depth arrived to 4-6 m. Based on the predictive performance of different ML algorithms, the extreme gradient boosting (XGB) was selected as the best model to produce accurate predictions for the most metal(loid)s content. Contents of As, Cd, Pb, and Zn in the heavily contaminated zones declined with an increase of soil depth. The metal(loid) contents in surface soil of 0-2 m could be readily used to predict the content of Cd, Cr, Hg, and Zn in subsurface soil from 2 m to 10 m. Based on the metal-specific XGB models, sulfur content, functional area, and soil texture were identified as key factors affecting the vertical distribution of As, Cd, Pb, and Zn in site soil. Results suggested the ML method is helpful to manage the potential environmental risks of metal(loid)s in Pb/Zn smelting site.

Effects of STN-DBS on cognition and mood in young-onset Parkinson's disease: a two-year follow-up.

Background: The effects of subthalamic nucleus deep brain stimulation (STN-DBS) on the cognition and mood of patients with PD are still not uniformly concluded, and young-onset Parkinson's disease (YOPD) is even less explored. Objective: To observe the effectiveness of STN-DBS on the cognition and mood of YOPD patients. Methods: A total of 27 subjects, with a mean age at onset of 39.48 ± 6.24 and age at surgery for STN-DBS of 48.44 ± 4.85, were followed up preoperatively and for 2 years postoperatively. Using the Unified Parkinson disease rating scale (UPDRS), H&Y(Hoehn and Yahr stage), 39-Item Parkinson's Disease Questionnaire (PDQ-39), Mini-mental state examination (MMSE), Montreal Cognitive Assessment (MoCA), Hamilton depression scale (HAMD), Hamilton anxiety scale (HAMA) to assess motor, cognition, and mood. Results: At the 2-year follow-up after STN-DBS, YOPD patients showed significant improvements in motor and quality of life (UPDRS III: p < 0.001, PDQ-39: p < 0.001); overall cognition was not significantly different from preoperative (MMSE: p = 0.275, MoCA: p = 0.913), although language function was significantly impaired compared to preoperative (MMSE: p = 0.004, MoCA: p = 0.009); depression and anxiety symptoms also improved significantly (HAMD: p < 0.001, HAMA: p < 0.001) and the depression score correlated significantly with motor (preoperative: r = 0.493, p = 0.009), disease duration (preoperative: r = 0.519, p = 0.006; postoperative: r = 0.406, p = 0.036) and H&Y (preoperative: r = 0.430, p = 0.025; postoperative: r = 0.387, p = 0.046); total anxiety scores were also significantly correlated with motor (preoperative: r = 0.553, p = 0.003; postoperative: r = 0.444, p = 0.020), disease duration (preoperative: r = 0.417, p = 0.031), PDQ-39 (preoperative: r = 0.464, p = 0.015) and H&Y (preoperative: r = 0.440, p = 0.022; postoperative: r = 0.526, p = 0.005). Conclusion: STN-DBS is a safe and effective treatment for YOPD. The mood improved significantly, and overall cognition was not impaired, were only verbal fluency decreased but did not affect the improvement in quality of life.