RESUMEN
The transpedicular procedure has been widely used in spinal surgery. The determination of the best entry point is the key to perform a successful transpedicular procedure. Various techniques have been used to determine this point, but the results are variable. This study was carried out to determine the posterior endpoint of the lumbar pedicle central axis on the standard anterior-posterior (AP) fluoroscopic images. Computer-aided design technology was used to determine the pedicle central axis and the posterior endpoint of the pedicle central axis on the posterior aspect of the vertebra. The standard AP fluoroscopic image of the lumbar vertebral models by three-dimensional printing was achieved. The endpoint projection on the AP fluoroscopic image was determined in reference to the pedicle cortex projection by the measurements of the angle and distance on the established X-Y coordinate system of the radiologic image. The projection of posterior endpoint of the lumbar pedicle central axis were found to be superior to the X-axis of the established X-Y coordinate system and was located on the pedicle cortex projection on the standard AP fluoroscopic image of the vertebra. The projection point was distributed in different sectors in the coordinate system. It was located superior to the X-axis by 18° to 26° at L1, while they were located superior to the X-axis by 12° to 14° at L2 to L5. The projections of posterior endpoints of the lumbar pedicle central axis were located in different positions on the standard AP fluoroscopic image of the vertebra. The determination method of the projection point was helpful for selecting an entry point for a transpedicular procedure with a fluoroscopic technique.
Asunto(s)
Vértebras Lumbares , Tornillos Pediculares , Vértebras Lumbares/cirugía , Vértebras Lumbares/diagnóstico por imagen , Fluoroscopía/métodos , Humanos , Masculino , Femenino , Fusión Vertebral/métodos , Impresión Tridimensional , Diseño Asistido por ComputadoraRESUMEN
Implant-associated infection (IAI) is an unsolved problem in orthopaedics. Current therapies, including antibiotics and surgical debridement, can lead severe clinical and financial burdens on patients. Therefore, there is an urgent need to reinforce the inherent antibacterial properties of implants. Recently, two-dimensional (2D) silicene nanosheets (SNs) have gained increasing attention in biomedical fields owing to their considerable biocompatibility, biodegradability and strong photothermal-conversion performance. Herein, a dual-functional photosensitive coating on a Ti substrate (denoted as TPSNs) was rationally fabricated for bacterial inhibition and osteogenesis promotion. For the first time, SNs were loaded onto the surface of implants. Hyperthermia generated by the SNs and polydopamine (PDA) coating under 808 nm laser irradiation achieved the in vitro anti-bacterial efficiency of 90.7 ± 2.4 % for S. aureus and 88.0 ± 5.8 % for E. coli, respectively. In addition, TPSNs exhibited promising biocompatibility for the promotion of BMSC (bone marrow mesenchymal stem cells) proliferation and spreading. The presence of silicon (Si) in TPSNs contributed to the improved osteogenic differentiation of BMSCs, elevating the expressions of RUNX2 and OCN. In animal experiments, the combination of TPSNs with photothermal therapy (PTT) achieved an anti-bacterial efficiency of 89.2 % ± 1.6 % against S. aureus. Furthermore, TPSNs significantly improved bone-implant osseointegration in vivo. Overall, the development of a dual-functional TPSNs coating provides a new strategy for combating IAI.
Asunto(s)
Osteogénesis , Staphylococcus aureus , Ratas , Animales , Humanos , Ratas Sprague-Dawley , Escherichia coli , Materiales Biocompatibles Revestidos/farmacología , Materiales Biocompatibles Revestidos/química , Complicaciones Posoperatorias , Antibacterianos/farmacología , Antibacterianos/química , Titanio/farmacología , Titanio/química , Propiedades de SuperficieRESUMEN
Surgical site infection (SSI) remains a major threat for implant failure in orthopedics. Herein, we report a dual-functional coating on Ti implants (named Ti/PDA/BP) with the integration of two-dimensional (2D) photo-sono sensitive black phosphorus nanosheets (BPNSs) and polydopamine (PDA) for efficient bacterial inhibition and bone-implant integration. For the first time, we employ BPNSs as generators of reactive radicals (ROS) under ultrasound (US) stimuli for implant associated infection. Additionally, the application of PDA improves the stability of BPNSs, the biocompatibility and photothermal performance of this hybrid coating. The as-prepared Ti/PDA/BP coating exhibits superior biocompatibility, bioactivity, photothermal and sonodynamic conversion abilities. Owing to the synergistic effect of hyperthermia and ·OH, Ti/PDA/BP damages the membrane and antioxidant system of Staphylococcus aureus, reaching a high antibacterial activity of 96.6% in vitro and 97.3% in vivo with rapid 10 min NIR irradiation and 20 min US treatment. In addition, we firstly unveil the significant effect of Ti/PDA/BP-based sonodynamic therapy (SDT) on bacterial membrane and oxidative stress at the transcriptome level. Moreover, the Ti/PDA/BP coating remarkably promotes osteogenesis in vitro and bone-implant osseointegration in vivo. Overall, development of Ti/PDA/BP bioactive coating provides a new strategy for combating the implant associated infection.
Asunto(s)
Hipertermia Inducida , Fósforo , Prótesis e Implantes , Huesos , Fototerapia , Antibacterianos/farmacología , Antibacterianos/uso terapéuticoRESUMEN
BACKGROUND: Ankylosing spondylitis-related cervical spine fracture with neurologic impairment (ASCF-NI) is a rare but often lethal injury. Factors independently associated with survival after treatment remain poorly defined, and identifying patients who are likely to survive the injury remains challenging. QUESTIONS/PURPOSES: (1) What factors are independently associated with survival after treatment among patients with ASCF-NI? (2) Can a nomogram be developed that is sufficiently simple for clinicians to use that can identify patients who are the most likely to survive after injury? METHODS: This retrospective study was conducted based on a multi-institutional group of patients admitted and treated at one of 29 tertiary hospitals in China between March 1, 2003, and July 31, 2019. A total of 363 patients with a mean age of 53 ± 12 years were eventually included, 343 of whom were male. According to the National Household Registration Management System, 17% (61 of 363) died within 5 years of injury. Patients were treated using nonsurgical treatment or surgery, including procedures using the anterior approach, posterior approach, or combined anterior and posterior approaches. Indications for surgery included three-column injury, unstable fracture displacement, neurologic impairment or continuous progress, and intervertebral disc incarceration. By contrast, patients generally received nonsurgical treatment when they had a relatively stable fracture or medical conditions that did not tolerate surgery. Demographic, clinical, and treatment data were collected. The primary study goal was to identify which factors are independently associated with death within 5 years of injury, and the secondary goal was the development of a clinically applicable nomogram. We developed a multivariable Cox hazards regression model, and independent risk factors were defined by backward stepwise selection with the Akaike information criterion. We used these factors to create a nomogram using a multivariate Cox proportional hazards regression analysis. RESULTS: After controlling for potentially confounding variables, we found the following factors were independently associated with a lower likelihood of survival after injury: lower fracture site, more-severe peri-injury complications, poorer American Spinal Injury Association (ASIA) Impairment Scale, and treatment methods. We found that a C5 to C7 or T1 fracture (ref: C1 to C4 and 5; hazard ratio 1.7 [95% confidence interval 0.9 to 3.5]; p = 0.12), moderate peri-injury complications (ref: absence of or mild complications; HR 6.0 [95% CI 2.3 to 16.0]; p < 0.001), severe peri-injury complications (ref: absence of or mild complications; HR 30.0 [95% CI 11.5 to 78.3]; p < 0.001), ASIA Grade A (ref: ASIA Grade D; HR 2.8 [95% CI 1.1 to 7.0]; p = 0.03), anterior approach (ref: nonsurgical treatment; HR 0.5 [95% CI 0.2 to 1.0]; p = 0.04), posterior approach (ref: nonsurgical treatment; HR 0.4 [95% CI 0.2 to 0.8]; p = 0.006), and combined anterior and posterior approach (ref: nonsurgical treatment; HR 0.4 [95% CI 0.2 to 0.9]; p = 0.02) were associated with survival. Based on these factors, a nomogram was developed to predict the survival of patients with ASCF-NI after treatment. Tests revealed that the developed nomogram had good performance (C statistic of 0.91). CONCLUSION: The nomogram developed in this study will allow us to classify patients with different mortality risk levels into groups. This, coupled with the factors we identified, was independently associated with survival, and can be used to guide more appropriate treatment and care strategies for patients with ASCF-NI. LEVEL OF EVIDENCE: Level III, therapeutic study.
Asunto(s)
Fracturas Óseas , Enfermedades del Sistema Nervioso , Fracturas de la Columna Vertebral , Espondilitis Anquilosante , Humanos , Masculino , Adulto , Persona de Mediana Edad , Anciano , Femenino , Nomogramas , Espondilitis Anquilosante/complicaciones , Espondilitis Anquilosante/diagnóstico , Espondilitis Anquilosante/terapia , Estudios Retrospectivos , Fracturas de la Columna Vertebral/diagnóstico por imagen , Fracturas de la Columna Vertebral/etiología , Fracturas de la Columna Vertebral/terapiaRESUMEN
Background: The mortality rate in patients with ankylosing spondylitis (AS) and cervical fracture is relatively high. Objectives: This study aimed to investigate the instantaneous death risk and conditional survival (CS) in patients with AS and cervical fracture. We also studied the relationship between surgical timing and the incidence of complications. Methods: This national multicentre retrospective study included 459 patients with AS and cervical fractures between 2003 and 2019. The hazard function was used to determine the risk of instantaneous death. The five-year CS was calculated to show the dynamic changes in prognosis. Results: The instantaneous death risk was relatively high in the first 6 months and gradually decreased over time in patients with AS and cervical fracture. For patients who did not undergo surgery, the instantaneous risk of death was relatively high in the first 15 months and gradually decreased over time. For patients with American Spinal Injury Association impairment scale (ASIA) A and B, the 5-year CS was 55.3% at baseline, and improved steadily to 88.4% at 2 years. Odds ratios (ORs) for pneumonia, electrolyte disturbance, respiratory insufficiency, and phlebothrombosis decreased as the surgery timing increased. Conclusion: Deaths occurred mainly in the first 6 months after injury and gradually decreased over time. Our study highlights the need for continued surveillance and care in patients with AS with cervical fractures and provides useful survival estimates for both surgeons and patients. We also observed that early surgery can significantly increase functional recovery, and decrease the incidence of complications and rehospitalisation.
Asunto(s)
Fracturas de la Columna Vertebral , Espondilitis Anquilosante , Vértebras Cervicales/lesiones , Vértebras Cervicales/cirugía , Electrólitos , Humanos , Estudios Retrospectivos , Fracturas de la Columna Vertebral/complicaciones , Fracturas de la Columna Vertebral/cirugía , Espondilitis Anquilosante/complicaciones , Espondilitis Anquilosante/cirugíaRESUMEN
BACKGROUND: Lower preoperative Hounsfield Unit (HU) values of vertebral body are associated with pedicle screw (PS) loosening after implantation with traditional trans-pedicular trajectory. However, the relationship between trajectory HU value and PS fixation quality remains unknown. This study aimed to investigate if 3-dimensionally (3D)-printed guider directed accurate implantation of pedicle screw could increase the anti-pulling properties of screws. METHODS: 3D models of cadaveric spines were reconstructed by using computed tomography image and PS trajectories were designed for both sides of vertebra. The designed trajectories were divided into high HU group and low HU group. PS implantation with 3D-printed screw guide can be in complementary shape with target vertebra. Throughout 3D finite element analysis and biomechanical tests, the pull-out strength of screws in high or low trajectory HU groups were compared. RESULTS: The HU value was 132 ± 13 (mean ± standard deviation) in low HU group and 189 ± 17 in high HU group. The distance between planned trajectories and actual trajectories was 1.69 ± 0.4 mm. Biomechanical tests showed that in the high trajectory HU group the pull-out strength of screws was 750.41 ± 80.65 N; compared with 655.83 ± 74.31 N in the low trajectory HU group, the difference was statistically significant. When simulated with the finite element method, the pull-out strength of low HU trajectory pedicle screws was lower than that of high HU trajectory pedicle screws. CONCLUSIONS: Preoperative computer-assisted trajectory design using a 3D-printed screw guide may direct more accurate implantation with optimal implantation trajectory, and may provide a new way to improve pedicle screw fixation.
Asunto(s)
Tornillos Pediculares , Fusión Vertebral , Fenómenos Biomecánicos , Densidad Ósea , Huesos , Humanos , Vértebras Lumbares/diagnóstico por imagen , Vértebras Lumbares/cirugía , Región Lumbosacra , Impresión Tridimensional , Fusión Vertebral/métodosRESUMEN
The treatment of infectious or potentially infective bone defects remains a major problem in clinical practice. Silver has the ability to potentiate antibiotics against resistant bacterial strains. In order to reduce the risk of long-term infections, it is necessary for the biomaterial scaffold to release Ag+ in a controlled manner during the entire healing process. In this study, given the antimicrobial characteristics of nanosized Ag (NSAg), we synthesized ß-tricalcium phosphate (ß-TCP) doped with 5 and 10 wt% NSAg (5 wt% NSAgTCP and 10 wt% NSAgTCP, respectively). The NSAgTCP composites exhibited similar macroporous structures to pure ß-TCP. The NSAgTCP samples were examined by scanning electron microscopy at 10,000-times magnification, which revealed that silver was still present at the nanometer scale. X-ray diffraction revealed that silver does not change the crystalline properties of ß-TCP. In addition, we observed that the mechanical strength of NSAgTCP increased with increasing amounts of added Ag. The antibacterial, physical, and chemical properties of NSAgTCP were investigated in vitro. We found that NSAgTCP is effective at inhibiting the growth of Staphylococcus aureus and Escherichia coli and is not cytotoxic to human bone marrow mesenchymal stem cells. Moreover, it does not hinder liver or kidney function when tested in vivo. As the bioceramic degrades, Ag ions are slowly released and new bone is formed. No significant cytotoxic effects were observed even when 10 wt% NSAgTCP was used. NSAgTCP has the ability to simultaneously repair bone defects and act as an anti-infective agent; hence, we expect that this material, with its good bone-repairing and anti-infective properties, will find wide spread use as a novel bone substitute.
Asunto(s)
Sustitutos de Huesos , Plata , Fosfatos de Calcio , Humanos , Porosidad , Plata/farmacologíaRESUMEN
Osteoporosis bone defect is a refractory orthopaedic disease which characterized by impaired bone quality and bone regeneration capacity. Current therapies, including antiosteoporosis drugs and artificial bone grafts, are not always satisfactory. Herein, a strontium-substituted calcium phosphate silicate bioactive ceramic (Sr-CPS) was fabricated. In the present study, the extracts of Sr-CPS were prepared for in vitro study and Sr-CPS scaffolds were used for in vivo study. The cytocompatibility, osteogenic and osteoclastogenic properties of Sr-CPS extracts were characterized in comparison to CPS. Molecular mechanisms were also evaluated by Western blot. Sr-CPS extracts were found to promote osteogenesis by upregulating Wnt/ß-catenin signal pathways and inhibit osteoclastogenesis through downregulating NF-κB signal pathway. In vivo, micro-CT, histological and histomorphometric observation were conducted after 8 weeks of implantation to evaluate the bone formation using calvarial defects model in ovariectomized rats. Compared with CPS, Sr-CPS significantly promoted critical sized ovariectomy (OVX) calvarial defects healing. Among all the samples, Sr-10 showed the best performance due to a perfect match of bone formation and scaffold degradation rates. Overall, the present study demonstrated that Sr-CPS ceramic can dually modulate both bone formation and resorption, which might be a promising candidate for the reconstruction of osteoporotic bone defect.
RESUMEN
OBJECTIVE: We compared the efficacy of a closed suction irrigation system (CSIS) and negative pressure wound therapy (NPWT) for deep surgical site infection (SSI) after lumbar surgery with instrumentation. METHODS: We included 31 patients (NPWT group, n =16; CSIS group, n = 15) with deep SSIs after lumbar surgery with instrumentation from 2007 to 2017. The medical records were reviewed and patient characteristics, laboratory results, infection details, and treatment interventions were recorded. The Japanese Orthopaedic Association score and Oswestry disability index were used to assess pain and functional outcomes preoperatively and 3 and 12 months postoperatively. The cost of SSIs were compared between the NPWT and CSIS groups. RESULTS: No significant differences were found in the baseline characteristic data between the NPWT and CSIS groups. Implants were retained in all patients in the CSIS group, but required removal from 2 patients with late infections in the NPWT group. The average hospital stay was 36.8 ± 10.5 days and 33.4 ± 18.9 days in the NPWT and CSIS groups, respectively. The cost was greater in the NPWT group than in the CSIS group. Both NPWT and CSIS significantly reduced the Oswestry disability index and improved the Japanese Orthopaedic Association scores, but no significant difference was found between the 2 groups. CONCLUSIONS: Our results have shown that both NPWT and CSIS are efficient techniques for the management of deep SSI after lumbar surgery with instrumentation. CSIS was more economical and the NPWT system was portable and easier for postoperative nursing care.
Asunto(s)
Región Lumbosacra/cirugía , Terapia de Presión Negativa para Heridas , Infección de la Herida Quirúrgica/cirugía , Cicatrización de Heridas/fisiología , Adulto , Anciano , Femenino , Humanos , Masculino , Persona de Mediana Edad , Terapia de Presión Negativa para Heridas/métodos , Prótesis e Implantes , Fusión Vertebral/instrumentación , Succión/métodosRESUMEN
Interbody fusion surgery is often used to settle matters such as degenerative disc disease or disc herniation in clinical orthopedics. Considering the deficiencies of the current treatment methods, we developed an interbody fusion cage made of calcium silicate (CS)/polyetheretherketone (PEEK) and hoped that the bioactive cage could exhibit great fusion ability and maintain stable mechanical function. In the goat model of cervical interbody fusion, the CS/PEEK cage showed stronger interbody fusion at 12 and 26 weeks compared with pure PEEK cage based on the X-ray analysis. The micro-CT scanning and analysis indicated that the CS/PEEK cage induced more new bone ingrowth than the PEEK cage and led to nearly complete interbody fusion at 26 weeks. Moreover, the CS/PEEK group showed excellent mechanical stability and stiffness as evaluated by the spine kinematic assay at the time points. The histological assessment showed the rapid osseointegration and mineralized bone formation around the CS/PEEK cage. This study confirmed that the bioactive CS/PEEK cage is capable of inducing highly effective bone fusion and has high potential to be used in the clinics of spine surgery.
RESUMEN
OBJECTIVE: We used a finite element (FE) analysis to investigate the biomechanical changes caused by transforaminal lumbar interbody fusion (TLIF) at the L4-L5 level by lumbar lordosis (LL) degree. METHODS: A lumbar FE model (L1-S5) was constructed based on computed tomography scans of a 30-year-old healthy male volunteer (pelvic incidence,= 50°; LL, 52°). We investigated the influence of LL on the biomechanical behavior of the lumbar spine after TLIF in L4-L5 fusion models with 57°, 52°, 47°, and 40° LL. The LL was defined as the angle between the superior end plate of L1 and the superior end plate of S1. A 150-N vertical axial preload was imposed on the superior surface of L3. A 10-N/m moment was simultaneously applied on the L3 superior surface along the radial direction to simulate the 4 basic physiologic motions of flexion, extension, lateral bending, and torsion in the numeric simulations. The range of motion (ROM) and intradiscal pressure (IDP) of L3-L4 were evaluated and compared in the simulated cases. RESULTS: In all motion patterns, the ROM and IDP were both increased after TLIF. In addition, the decrease in lordosis generally increased the ROM and IDP in all motion patterns. CONCLUSIONS: This FE analysis indicated that decreased spinal lordosis may evoke overstress of the adjacent segment and increase the risk of the pathologic development of adjacent segment degeneration; thus, adjacent segment degeneration should be considered when planning a spinal fusion procedure.
Asunto(s)
Análisis de Elementos Finitos , Lordosis/cirugía , Vértebras Lumbares/cirugía , Rango del Movimiento Articular/fisiología , Adulto , Fenómenos Biomecánicos/fisiología , Cadáver , Humanos , Región Lumbosacra/cirugía , Masculino , Fusión Vertebral/métodosRESUMEN
The purpose of this study was to evaluate the relationship between the nerve root of lower lumbar and the surrounding structures using three-dimensional computed tomography (3D CT).Twenty-three consecutive patients with thoracolumbar fractures without obvious radiological degeneration were retrospectively studied at the spinal surgery department of the hospital. The parameters of the relationship between the nerve root of the lower lumbar and the surrounding structures were measured using 3D CT in the work station of the picture archiving and communication system.The size of the dorsal root ganglion (DRG) of the L4 was 5.5â±â0.4âmm on the right side and 5.8â±â0.3âmm on the left side. The size of the DRG of the L5 was 6.1â±â0.5âmm on the right side and 5.7â±â0.4âmm on the left side. The value of the preganglionic nerve root of the L4 was 11.2â±â0.6âmm on the right side and 12.3â±â0.8âmm on the left side, and the value of the preganglionic nerve root of the L5 was 15.1â±â1.1âmm on the right side and 14.9â±â0.9âmm on the left side.Using 3D CT imaging constructed in the picture archiving and communication system is a practical and convenient method for evaluating the relationship between the nerve root and the surrounding structures in the routine clinical work of a spinal surgeon. The data obtained through 3D CT imaging will be helpful for surgeons, allowing them to become more familiar with correlating anatomical knowledge of individual patient.
Asunto(s)
Imagenología Tridimensional , Región Lumbosacra/diagnóstico por imagen , Raíces Nerviosas Espinales/diagnóstico por imagen , Tomografía Computarizada por Rayos X/métodos , Adulto , Femenino , Humanos , Región Lumbosacra/anatomía & histología , Masculino , Persona de Mediana Edad , Estudios Retrospectivos , Raíces Nerviosas Espinales/anatomía & histologíaRESUMEN
This study assessed the utility of three-dimensional preoperative image reconstruction as digital virtual templating for junior surgeons in placing a pedicle screw (PS) in the lumbar spine. Twenty-three patients of lumbar disease were operated on with bilateral PS fixation in our hospital. The two sides of lumbar pedicles were randomly divided into "hand-free group" (HFG) and "digital virtual template group" (DVTG) in each patient. Two junior surgeons preoperatively randomly divided into these two groups finished the placement of PSs. The accuracy of PS and the procedure time of PS insertion were recorded. The accuracy of PS in DVTG was 91.8% and that in HFG was 87.7%. The PS insertion procedure time of DVTG was 74.5 ± 8.1 s and that of HFG was 90.9 ± 9.9 s. Although no significant difference was reported in the accurate rate of PS between the two groups, the PS insertion procedure time was significantly shorter in DVTG than in HFG (P < 0.05). Digital virtual template is simple and can reduce the procedure time of PS placement.
Asunto(s)
Imagenología Tridimensional , Degeneración del Disco Intervertebral/diagnóstico por imagen , Degeneración del Disco Intervertebral/cirugía , Desplazamiento del Disco Intervertebral/diagnóstico por imagen , Desplazamiento del Disco Intervertebral/cirugía , Interfaz Usuario-Computador , Adulto , Anciano , Femenino , Humanos , Degeneración del Disco Intervertebral/fisiopatología , Desplazamiento del Disco Intervertebral/fisiopatología , Masculino , Persona de Mediana Edad , Tornillos Pediculares , Tomografía Computarizada por Tomografía de Emisión de Positrones , Cuidados Posoperatorios , Cuidados Preoperatorios , CirujanosRESUMEN
OBJECTIVE: To compare the biomechanical properties of a novel annular incision technique, an oblique incision made approximately 60° to the spinal column, with the traditional transverse and longitudinal annular slit incision in an ex vivo sheep lumbar spine model. METHODS: Sixteen sheep lumbar spines were used for the current ex vivo biomechanical comparative study. Functional spine unit (FSU) specimens composed of two vertebrae and one disc in the middle was cut from the whole lumbar spine. Annular slit incisions of 5 mm were made in different directions with a 15-blade knife at the intervertebral disc, following which partial discectomy was performed to produce the following groups: control with no incision, transverse slit, longitudinal slit and oblique slit groups. The specimens were then subjected to flexion-extension, lateral bending, axial rotation and compression tests. RESULTS: As expected, the control group showed the least range of motion (ROM) in the flexion-extension test. The oblique slit group showed a trend toward a smaller ROM than the transverse and longitudinal groups in 1, 2, 3 and 5 Nm flexion-extension tests; these differences were not statistically significant (P > 0.05). In addition, the transverse (5.80° ± 0.20°), longitudinal (5.77° ± 0.67°) and oblique (5.47° ± 0.43°) slit groups showed a significantly larger ROM than the control group (3.22° ± 0.28°) in 2 Nm lateral bending tests (P < 0.05). Compared with the transverse and longitudinal groups, the oblique group also showed a trend toward a smaller ROM in lateral bending tests (P > 0.05). Following increments in the axial torsion force, the ROM was greater in all four experimental groups than the ROM with 1 Nm axial torsion. Furthermore, a significantly smaller axial rotational ROM was found in the oblique than the transverse group for 1 and 5 Nm force (P < 0.05). With increase in the axial force to 5 Nm, the ROM in the oblique slit group (4.71° ± 0.52°) was significantly smaller than that in the transverse group (7.25° ± 0.46°, P < 0.05), but not significantly different from that of the longitudinal slit group (5.84° ± 0.23°, P > 0.05). Comparable ultimate loads to failure were found in the oblique, transverse and longitudinal groups; the highest ultimate load to failure being in the control group (P > 0.05). CONCLUSION: The novel oblique slit annular incision to the intervertebral disc showed a trend toward better biomechanical properties than the traditional transverse and longitudinal slit incisions.
Asunto(s)
Discectomía/métodos , Disco Intervertebral/fisiología , Disco Intervertebral/cirugía , Vértebras Lumbares/fisiología , Vértebras Lumbares/cirugía , Animales , Fenómenos Biomecánicos , Distribución Aleatoria , Rango del Movimiento Articular , OvinosRESUMEN
Low back pain is associated with intervertebral disc degeneration (IVDD) due to cellular loss through apoptosis. Mechanical factors play an important role in maintaining the survival of the annulus fibrosus (AF) cells and the deposition of extracellular matrix. However, the mechanisms that excessive mechanical forces lead to AF cell apoptosis are not clear. The present study was to look for how AF cells sense mechanical changes. In vivo experiments, the involvement of mechanoreceptors in apoptosis was examined by RT-PCR and/or immunoblotting in the lumbar spine of rats subjected to unbalanced dynamic and static forces. In vitro experiments, we investigated apoptotic signaling pathways in untransfected and transfected AF cells with the lentivirus vector for rat ß1 integrin overexpression after cyclic stretch. Apoptosis in AF cells was assessed using flow cytometry, Hoechst 33258 nuclear staining. Western blotting was used to analyze expression of ß1 integrin and caspase-3 and ERK1/2 MAPK signaling molecules. In the rat IVDD model, unbalanced dynamic and static forces induced apoptosis of disc cells, which corresponded to decreased expression of ß1 integrin. Cyclic stretch-induced apoptosis in rat AF cells correlated with the activation of caspase-3 and with decreased levels of ß1 integrin and the phosphorylation levels of ERK1/2 activation level. However, the overexpression of ß1 integrin in AF cells ameliorated cyclic stretch-induced apoptosis and decreased caspase-3 activation. Furthermore, ERK1/2-specific inhibitor promotes apoptosis in vector ß1-infected AF cells. These results suggest that the disruption of ß1 integrin signaling may underlie disc cell apoptosis induced by mechanical stress. Further work is necessary to fully elucidate the pathophysiological mechanisms that underlie IVDD caused by unbalanced dynamic and static forces.
Asunto(s)
Condrocitos/metabolismo , Integrina beta1/genética , Degeneración del Disco Intervertebral/genética , Proteína Quinasa 1 Activada por Mitógenos/genética , Proteína Quinasa 3 Activada por Mitógenos/genética , Osteoblastos/metabolismo , Animales , Apoptosis/genética , Caspasa 3/genética , Caspasa 3/metabolismo , Condrocitos/patología , Modelos Animales de Enfermedad , Regulación de la Expresión Génica , Vectores Genéticos/química , Vectores Genéticos/metabolismo , Humanos , Integrina beta1/metabolismo , Disco Intervertebral/metabolismo , Disco Intervertebral/patología , Degeneración del Disco Intervertebral/metabolismo , Degeneración del Disco Intervertebral/patología , Lentivirus/genética , Vértebras Lumbares/metabolismo , Vértebras Lumbares/patología , Masculino , Mecanotransducción Celular/genética , Proteína Quinasa 1 Activada por Mitógenos/metabolismo , Proteína Quinasa 3 Activada por Mitógenos/metabolismo , Osteoblastos/patología , Fosforilación , Ratas , Ratas Sprague-Dawley , Estrés Mecánico , TransfecciónRESUMEN
The combined anteversion surgical technique has been proposed and used in clinical practice. To more objectively evaluate the feasibility of this surgical technique using combined anteversion concept for DDH patients, we studied 34 DDH patients (40 hips) in this research. Every patient underwent pelvic CT scans before and after surgery and the HHSs were recorded. Optimal range of joint motion was measured using a three-dimensional reconstruction technique and a dynamic measurement technique. The results revealed that joint function met the requirements of daily life and the range of motion was not over-limited by impingement between the prosthesis and the skeleton. Moreover, the combined anteversion was found to be the most critical parameter in this study.
Asunto(s)
Artroplastia de Reemplazo de Cadera/métodos , Luxación Congénita de la Cadera/cirugía , Articulación de la Cadera/fisiología , Rango del Movimiento Articular , Anciano , Femenino , Cadera/cirugía , Articulación de la Cadera/cirugía , Humanos , Masculino , Persona de Mediana Edad , Movimiento , Pelvis/diagnóstico por imagen , Estudios Retrospectivos , Tomografía Computarizada por Rayos XRESUMEN
The antibiotic compound, rifampicin (RFP), was loaded into porous reinforced ß-tricalcium phosphate (ß-TCP) scaffolds using three different solution adsorption methods. This resulted in drug delivery systems (DDS) generated by vacuum adsorption (VA), dynamic adsorption (DA), and static adsorption (SA). In vitro examination of the drug loading and release profiles of the DDS indicated that the unit mass of RFP loaded into the scaffold by the VA method (0.44 mg/g) was higher than that achieved by SA (0.42 mg/g) or DA (0.38 mg/g) (P < 0.05). The mechanical strength had no significant change after RFP-loading (P > 0.05). Moreover, there were no significant differences among the mechanical strength of three ß-TCP DDS generated by loading RFP using SA, DA, and VA (P > 0.05). In vitro release testing showed an initial burst release of RFP from the three different DDS within the first 3 h and in the first 51 h, the cumulative release of RFP from VA-DDS, DA-DDS, and SA-DDS had reached 56.2, 83.6, and 88.6 %, respectively. Complete RFP release had occurred from VA-DDS, DA-DDS, and SA-DDS after 23, 17, and 15 days, respectively. As the VA-DDS method showed improved RFP loading and a more sustained drug release, this method is recommended for solution adsorption drug loading into porous ß-TCP scaffolds to form a DDS.
Asunto(s)
Sustitutos de Huesos/síntesis química , Fosfatos de Calcio/química , Implantes de Medicamentos/síntesis química , Rifampin/administración & dosificación , Rifampin/química , Andamios del Tejido , Absorción Fisicoquímica , Adsorción , Antibióticos Antituberculosos/administración & dosificación , Antibióticos Antituberculosos/química , Fuerza Compresiva , Difusión , Implantes de Medicamentos/administración & dosificación , Porosidad , Resistencia a la Tracción , VacioRESUMEN
PURPOSE: A variety of bone substitutes have been successfully used to fill PEEK cages in cervical interbody fusion in order to avoid the complications related to bone harvesting from the donor site. However, no controlled study has previously been conducted to compare the effectiveness of PEEK interbody cages containing calcium sulphate/ demineralized bone matrix (CS/DBM) with autogenous cancellous bone for the treatment of cervical spondylosis. The objective of this prospective, randomized clinical study was to evaluate the effectiveness of implanting PEEK cages containing CS/DBM for the treatment of cervical radiculopathy and/or myelopathy. METHODS: Sixty-eight patients with cervical radiculopathy and/or myelopathy were randomly assigned to receive one- or two-level discectomy and fusion with PEEK interbody cages containing CS/DBM or autogenous iliac cancellous bone (AIB). The patients were followed up for two years postoperatively. The radiological and clinical outcomes were assessed during a two-year follow-up. RESULTS: The mean blood loss was 75 ± 18.5 ml in the CS/DBM group and 100 ± 19.6 ml (P < 0.01) in the AIB group. The fusion rate was 94.3 % in the CS/DBM group and 100 % in the AIB group at 12-month follow-up. The fusion rate was 100 % at final follow-up in both groups. No significant difference (P > 0.05) was found regarding improvement of JOA score and segmental lordosis as well as neck and arm pain at all time intervals between the two groups. The total complication rate was significantly higher (P < 0.05) in the AIB group than in the CS/DBM group, but there was no significant difference between the two groups (P > 0.05) when comparing the complications in the neck. CONCLUSIONS: In conclusion, the PEEK interbody fusion cage containing CS/DBM or AIB following one- or two-level discectomy had a similar outcome for cervical spondylotic radiculopathy and/or myelopathy. The rate of fusion and the recovery rate of JOA score between the two groups were the same. The filling of CS/DBM in the PEEK cage instead of AIB has the advantage of less operative blood loss and fewer complications at the donor site.
Asunto(s)
Sustitutos de Huesos/uso terapéutico , Sulfato de Calcio/uso terapéutico , Vértebras Cervicales , Fusión Vertebral , Espondilosis/cirugía , Adulto , Anciano , Autoinjertos , Técnica de Desmineralización de Huesos , Vértebras Cervicales/cirugía , Discectomía , Femenino , Humanos , Masculino , Persona de Mediana Edad , Estudios Prospectivos , Radiculopatía/cirugía , Trasplante Autólogo , Resultado del TratamientoRESUMEN
Nowadays, the silver is widely used in the biological field and its biological safety catches great attention. It is important to know the distribution of silver ions within the biological organism and the toxic threshold concentration in the tissue. Therefore, a highly sensitive method for measurement of trace amount of silver ion in the medical biological samples is needed. With its high sensitivity for detection of metal ions, inductively coupled plasma mass spectrometry (ICP-MS) method is well suited for quantification of trace amount of silver ion in such samples, but method development is still in its infancy. Consequently, a simple and convenient method for determination of trace amount of silver in the animal serum, tissues or organs was developed, in which the samples were subjected to the microwave digestion, followed by the ICP-MS analysis. To begin with, the samples of serum, muscle, bone marrow, bone, heart, liver, spleen, and kidney were sequently processed in 5 mL of HNO3 and 2 mL of H2O2 solution. Then the samples were completely digested by microwave with the power of 2 000 watts. The temperature was raised gradually by 3-step program. Moreover, the data achieved were reproducible and the method was time saving and especially for large amounts of sample processing. Then the digested solutions were diluted to constant volume. Finally, the concentration of 107Ag in the samples was analyzed by the method of ICP-MS under the optimized conditions. Element yttrium (Y) was used as the internal standard to compensate for matrix suppression effect and improve the accuracy of measurement. For one thing, the analytical results showed that the detection limit of the trace element 107Ag was 0.98 µg · kg(-1), and furthermore, the correlation coefficient of standard curve was 0.999 9. For another thing, the recovery rate of the silver element ranged from 98% to 107%, which was calculated according to measured quantity before adding standard, adding standard and measured quantity after adding standard. At the same time, the relative standard deviation (RSD) of the method was in the range of 2.0%-4.3%. The concentrations of element silver in animal serum, tissues and organs were determined by the aboved method. The obtained results showed that silver ions were mainly accumulated in the liver after they were intaken into the body. The results suggested that the microwave digestion-ICP-MS method could accurately determine the trace element Ag in the body. The method developed has good feasibility and is suitable for the determination of trace element Ag in various types of medical and biological samples, especially for large quantities of biological samples. The process has the advantages of easysample processing and it is simple and convenient. In addition, the accurate results could be obtained in a short time with high sensitivity. Last but not least, the method provides the guidance for the determination of trace elements in other biological samples.
Asunto(s)
Suero/química , Plata/análisis , Oligoelementos/análisis , Animales , Peróxido de Hidrógeno , Límite de Detección , Espectrometría de Masas , Metales , Microondas , Espectrofotometría Atómica , Análisis Espectral , Distribución TisularRESUMEN
OBJECTIVE: The effect of Sox9 on the differentiation of bone marrow mesenchymal stem cells (BMSCs) to nucleus pulposus (NP)-like (chondrocyte-like) cells in vitro has been demonstrated. The objective of this study is to investigate the efficacy and feasibility of Sox9-transduced BMSCs to repair the degenerated intervertebral disc in a rabbit model. MATERIALS AND METHODS: Fifty skeletally mature New Zealand white rabbits were used. In the treatment groups, NP tissue was aspirated from the L2-L3, L3-L4, and L4-L5 discs in accordance with a previously validated rabbit model of intervertebral disc degeneration and then treated with thermogelling chitosan (C/Gp), GFP-transduced autologous BMSCs with C/Gp or Sox9-transduced autologous BMSCs with C/Gp. The role of Sox9 in the chondrogenic differentiation of BMSCs embedded in C/Gp gels in vitro and the repair effect of Sox9-transduced BMSCs on degenerated discs were evaluated by real-time PCR, conventional and quantitative MRI, macroscopic appearance, histology and immunohistochemistry. RESULTS: Sox9 could induce the chondrogenic differentiation of BMSCs in C/Gp gels and BMSCs could survive in vivo for at least 12 weeks. A higher T2-weighted signal intensity and T2 value, better preserved NP structure and greater amount of extracellular matrix were observed in discs treated with Sox9-transduced BMSCs compared with those without transduction. CONCLUSION: Sox9 gene transfer could significantly enhance the repair effect of BMSCs on the degenerated discs.