RESUMEN
It is very important and highly valuable to detect ClO- in samples and living cells with accuracy and speed. In this work, a novel fluorescent probe NA was prepared from 4-bromo-1,8-naphthalic anhydride by acylation reaction and Suzuki coupling reaction and used for the detection of ClO-. Thiomethyl serves as the recognition group for probe NA, while naphthalimide serves as fluorescent chromophore. The probe exhibited an extremely pronounced blue shift from yellow to blue fluorescence within 1 min after the addition of hypochlorite (ClO-). The probe demonstrates high sensitivity to ClO- with a limit of detection (LOD) of 1.22 µM. Also, probe NA demonstrates excellent selectivity and immunity to interference. Additionally, simple fluorescent test strips containing probe NA were prepared in this study, enabling rapid detection of ClO- in water samples. And NA had been effectively used to image endogenous and exogenous ClO-fluorescence in living cells. The results suggest that probe NA has significant potential for portable detection and biological applications.
RESUMEN
Wood, as a natural biomass material, has long been a research focus. Superhydrophobic modified wood, in particular, has shown great promise in a myriad of engineering applications such as architecture, landscape, and shipbuilding. However, commercial development has encountered significant resistance due to preparation difficulties and sometimes unsatisfactory performance. In this study, hydrophobic/superhydrophobic wood comodified with methyltrimethoxysilane (MTMS) and 1H,1H,2H,2H-perfluorodecyltrimethoxysilane (PFDTMS) was fabricated by a one-step sol-gel method that uses an in situ growth process. Low-molecular-weight MTMS was allowed to permeate the three-dimensional porous wood interior. Then, acid-base catalysts were used to regulate the hydrolytic condensation process of MTMS and PFDTMS composite silanes to generate micro/nano hierarchical structures with low surface energy on the wood surface. The physicochemical characteristics of modified wood were investigated and the reaction mechanism established. The modified wood displayed excellent internal hydrophobicity/surface superhydrophobicity, water-moisture resistance, and dimensional stability at low fluorine concentrations. The resulting superhydrophobic surface provided stain resistance, self-cleaning ability, and loading capacity in water while exhibiting good mechanochemical stability; wood mechanical strength was also enhanced. This methodology created a superhydrophobic surface and bulk hydrophobization of wood in one step. Beyond wood, this approach is expected to provide a promising approach for functional modification of other porous composite materials.
RESUMEN
Food safety is closely linked to human health. Thiabendazole is widely used as a fungicide and deodorant on agricultural products like vegetables and fruits to prevent fungal infections during transport and storage. This study aims to investigate the toxicity and potential mechanisms of Thiabendazole using novel network toxicology and molecular docking techniques. First, the ADMETlab2.0 and ADMETsar databases, along with literature, predicted Thiabendazole's potential to induce cancer and liver damage. Disease target libraries were constructed using GeneCards and TCMIP databases, while Thiabendazole target libraries were constructed using Swiss Target Prediction and TCMIP databases. The Venn database identified potential targets associated with Thiabendazole-induced cancer and liver injury. Protein-protein interaction (PPI) networks were derived from the STRING database, and gene ontology (GO) and Kyoto encyclopedia of genes and genomes (KEGG) pathways were obtained from the DAVID database. Molecular docking assessed the binding affinity between Thiabendazole and core targets. The study revealed 29 potential targets for Thiabendazole-induced cancer and 30 potential targets for liver injury. PPI identified 5 core targets for Thiabendazole-induced cancers and 4 core targets for induced liver injury. KEGG analysis indicated that Thiabendazole might induce gastric and prostate cancer via cyclin-dependent kinase 2 (CDK2) and epidermal growth factor receptor (EGFR) targets, and liver injury through the same targets, with the p53 signaling pathway being central. GO analysis indicated that Thiabendazole-induced cancers and liver injuries were related to mitotic cell cycle G2/M transition and DNA replication. Molecular docking showed stable binding of Thiabendazole with core targets including CDK1, CDK2, EGFR, and checkpoint kinase 1 (CHEK1). These findings suggest Thiabendazole may affect the G2/M transition of the mitotic cell cycle through the p53 signaling pathway, potentially inducing cancer and liver injury. This study provides a theoretical basis for understanding the potential molecular mechanisms underlying Thiabendazole toxicity, aiding in the prevention and treatment of related diseases. Additionally, the network toxicology approach accelerates the elucidation of toxic pathways for uncharacterized agricultural chemicals.
RESUMEN
A novel dual Photo-Fenton photocatalyst Fe2O3-Fe-CN with excellent Fe(III)/Fe(II) conversion efficiency and trace metal ion leaching rate has been fabricated by in-situ deposition of α-Fe2O3 quantum dots on ultrathin porous Fe-doped carbon nitride (Fe-CN) nanosheets. The iron species in Fe-CN and α-Fe2O3 QDs constitute a mutually reinforcing dual Photo-Fenton effect. The 4% Fe2O3-Fe-CN showed superior performance with kobs values 8.60 and 4.80 folders greater than pure CN and Fe-CN, respectively. The synergistic effect between α-Fe2O3 QDs and the ultrathin porous structure of Fe-CN is the primary reason for the outstanding catalytic performance exhibited by α-Fe2O3/Fe-CN. On one hand, the ultrathin porous structure of Fe-CN promotes the rapid transfer of photogenerated electrons. On the other hand, the efficient photogenerated charge separation at the α-Fe2O3/Fe-CN interface enables more photogenerated electrons to participate in the Fe3+/Fe2+ conversion and H2O2 activation. The trapping experiments demonstrate that â¢OH and â¢O2- are the primary active species in TC degradation. This work presents novel insights into the design of efficient heterogeneous Fenton catalysts for practical applications.
Asunto(s)
Compuestos Férricos , Peróxido de Hidrógeno , Hierro , Puntos Cuánticos , Catálisis , Compuestos Férricos/química , Hierro/química , Peróxido de Hidrógeno/química , Puntos Cuánticos/química , Procesos Fotoquímicos , Nitrilos/química , Porosidad , Grafito , Compuestos de NitrógenoRESUMEN
To develop a highly efficient adsorbent to remediate and remove hexavalent chromium ions (Cr(VI)) from polluted water, cellulose acetate (CA) and chitosan (CS), along with metal oxides (titanium dioxide (TiO2) and ferroferric oxide (Fe3O4)), and a zirconium-based metal-organic framework (UiO-66) were used to fabricate the composite porous nanofiber membranes through electrospinning. The adsorption performance, influencing factors, adsorption kinetics and isotherms of composite nanofiber membranes were comprehensively investigated. The multi-layer membrane with interpenetrating nanofibers and surface functional groups enhanced the natural physical adsorption and provided potential chemical sites. The thermal stability was improved by introducing TiO2 and UiO-66. CA/CS/UiO-66 exhibited the highest adsorption capacity (118.81 mg g-1) and removal rate (60.76%), which were twice higher than those of the control. The correlation coefficients (R2) of all the composite nanofibers regressed by the Langmuir model were significantly higher than those by the Freundlich model. The pseudo-first-order kinetic curve of CA/CS composite nanofibers showed the highest R2 (0.973), demonstrating that the whole adsorption process involved a combination of strong physical adsorption and weak chemical adsorption by the amino groups of CS. However, the R2 values of the pseudo-second-order kinetic model increased after incorporating TiO2, Fe3O4, and UiO-66 into the CA/CS composite nanofiber membranes since an enhanced chemical reaction with Cr (VI) occured during the adsorption.
Asunto(s)
Cromo , Estructuras Metalorgánicas , Nanofibras , Titanio , Contaminantes Químicos del Agua , Cromo/química , Nanofibras/química , Estructuras Metalorgánicas/química , Adsorción , Contaminantes Químicos del Agua/química , Titanio/química , Porosidad , Biomasa , Cinética , Circonio/química , Quitosano/química , Celulosa/química , Celulosa/análogos & derivadosRESUMEN
Fruit spoilage can cause huge economic losses, in which fungal infection is one of the main influencing factors, how to effectively control mould and spoilage of fruits and prolong their shelf-life has become a primary issue in the development of fruit and vegetable industry. In this study, rosin derivative maleopimaric anhydride (MPA) was combined with biodegradable and antifungal chitosan (CS) to enhance its antifungal and preservative properties. The modified compounds were characterized by FTIR, 1H NMR spectra and XRD, and the in vitro antifungal properties of the modified compounds were evaluated by the radial growth assay and the minimal inhibitory concentration assay. The preservation effect on small mandarin oranges and longan was studied. The analysis revealed that the modification product (CSMA) of MPA access to C6-OH of CS had a better antifungal effect. In addition, CSMA was more environmentally friendly and healthier than the commercially available chemical preservative (Imazalil), and had the same antifungal preservative effect in preserving small mandarin orange, and was able to extend the shelf life to >24 d. In the preservation of longan, CSMA was more effective against tissue water loss and was able to maintain the moisture in the longan pulp and extend the shelf life. Therefore, CSMA has good application potentials in longan keeping-fresh.
Asunto(s)
Antifúngicos , Quitosano , Quitosano/química , Quitosano/farmacología , Quitosano/síntesis química , Antifúngicos/farmacología , Antifúngicos/síntesis química , Antifúngicos/química , Pruebas de Sensibilidad Microbiana , Frutas/química , Conservación de Alimentos/métodos , Citrus/químicaRESUMEN
Iron ions play a crucial role in the environment and the human body. Therefore, developing an effective detection method is crucial. In this paper, we report CNS2, a chitosan-based fluorescent probe utilizing naphthalimide as a fluorophore. CNS2 is designed to "quench" its own yellow fluorescence through the specific binding of compounds containing enol structures to Fe3+. Studying the fluorescence lifetime of CNS2 in the presence or absence of Fe3+ reveals that the quenching mechanism is static. The presence of multiple recognition sites on the chitosan chain bound to Fe3+ gave CNS2 rapid recognition (1 min) and high sensitivity, with a detection limit as low as 0.211 µM. Moreover, the recognition of Fe3+ by CNS2 had a good specificity and was not affected by interferences. More importantly, in this study, CNS2 was successfully utilised to prepare fluorescent composite membranes and to detect Fe3+ in real water samples and a variety of food samples. The results show that the complex sample environment still does not affect the recognition of Fe3+ by CNS2. All the above experiments obtained more satisfactory results, which provide strong support for the detection of Fe3+ by the probe CNS2 in practical applications.
Asunto(s)
Quitosano , Colorantes Fluorescentes , Humanos , Colorantes Fluorescentes/química , Agua , Quitosano/química , Hierro/química , Fluorescencia , Espectrometría de Fluorescencia/métodosRESUMEN
Cellulose is the most abundant natural polymer with good biocompatibility and easy modification characteristics. In this paper, a novel cellulose fluorescence probe CNS for detecting ClO- was prepared by modifying microcrystalline cellulose (MCC). The fluorescence detection results indicate that CNS exhibits a highly specific "ratiometric" and "colorimetric" fluorescence response to ClO-. In the presence of ClO-, the fluorescence color changes from green to cyan. In addition, the color of the solution changes from yellow to colorless, which can be observed with the "naked eye". Considering the good selectivity and anti-interference ability of CNS, the probe can be used for the detection of ClO- in real water samples. Importantly, CNS composite films and test papers were prepared and showed practicability in the detection of ClO-, highlighting its broad application potentials.
Asunto(s)
Colorantes Fluorescentes , Ácido Hipocloroso , Colorantes Fluorescentes/química , Espectrometría de Fluorescencia , Colorimetría/métodos , CelulosaRESUMEN
Fe3+ is one of the most widely distributed and abundant elements on earth. Realizing efficient and real-time monitoring of Fe3+ is of great significance for the natural environment and the health of living organisms. In this paper, a flavonol-labelled cellulose-based fluorescent probe (ACHM) was synthesized by using dialdehyde cellulose (DAC) as the backbone and combining with flavonol derivatives (AHM - 1). The mechanism of recognizing Fe3+ was verified by characterizing the structure of ACHM by NMR, HRMS (High Resolution Mass Spectrometry), FTIR (Fourier Transform Infrared Spectroscopy), XRD (X-ray Diffraction), TG (Thermogravimetry) and SEM (Scanning Electron Microscopy). The H2O solution of the probe ACHM showed good fluorescence properties. It has quenching fluorescence properties for Fe3+, with a low limit of detection (LOD) of 0.10 µM and a fast response time of only 20 s. In addition, in order to expand the application range of the probe, ACHM was prepared as a fluorescent composite film with an average tensile strength of 32.9 MPa and an average elongation at break of 3.39 %. It shows its superiority in mechanical properties. The probe also demonstrated its practical application value for detecting Fe3+ in smartphone imaging applications.
Asunto(s)
Colorantes Fluorescentes , Teléfono Inteligente , Resistencia a la Tracción , Tecnología , Celulosa/químicaRESUMEN
The bioactivities of pristine chitosan are considerable weak compared with the commercial chemicals, which has restricted its broad application prospects in food packaging and preservation. In order to obtain a safe, biologically derived fruits preservative with excellent antifungal properties, dehydroabietic acid (DHA) was used to modify chitosan (CS). The structural characterization of modified chitosans were identified by FTIR and 1H NMR spectra. The XRD pattern showed the modified chitosan changed the crystal structure due to the modification of the amino and/or hydroxyl groups on the chitosan. Their antifungal activities against Penicillium digitutim and Penicillium italicum were investigated in vitro using the radial growth assay and the minimal inhibitory concentration assay. The study also examined the differences in antifungal effect among three modified chitosans. The results showed that DHA only conjugated thehydroxyl group at C-6, bearing free amino group at C-2, exhibited the strongest antifungal effect, with a minimum inhibitory concentration (MIC) of 200 µg/mL. In addition, a comparison of the antifungal activity of the modified compounds with different concentrations of Imazalil demonstrated that the modified biologic antifungal agent was as effective as Imazalil. CSDA can achieve 100 % inhibition of P. digitutim at concentrations >100 µg/mL and remain unchanged for a long time. Because CSDA can enhance the shelf life of longans, DHA-CS, chitosan derivatives, have tremendous promise for use in fruits preservation.
Asunto(s)
Antifúngicos , Quitosano , Antifúngicos/química , Quitosano/química , Espectroscopía de Resonancia Magnética , Pruebas de Sensibilidad MicrobianaRESUMEN
To develop a green and facile adsorbent for removing indoor polluted formaldehyde (HCHO) gas, the biomass porous nanofibrous membranes (BPNMs) derived from microcrystalline cellulose/chitosan were fabricated by electrospinning. The enhanced chemical adsorption sites with diverse oxygen (O) and nitrogen (N)-containing functional groups were introduced on the surface of BPNMs by non-thermal plasma modification under carbon dioxide (CO2) and nitrogen (N2) atmospheres. The average nanofiber diameters of nanofibrous membranes and their nanomechanical elastic modulus and hardness values decreased from 341 nm to 175-317 nm and from 2.00 GPa and 0.25 GPa to 1.70 GPa and 0.21 GPa, respectively, after plasma activation. The plasma-activated nanofibers showed superior hydrophilicity (WCA = 0°) and higher crystallinity than that of the control. The optimal HCHO adsorption capacity (134.16 mg g-1) of BPNMs was achieved under a N2 atmosphere at a plasma power of 30 W and for 3 min, which was 62.42 % higher compared with the control. Pyrrolic N, pyridinic N, CO and O-C=O were the most significant O and N-containing functional groups for the improved chemical adsorption of the BPNMs. The adsorption mechanism involved a synergistic combination of physical and chemical adsorption. This study provides a novel strategy that combines clean plasma activation with electrospinning to efficiently remove gaseous HCHO.
Asunto(s)
Celulosa , Quitosano , Nanofibras , Nanofibras/química , Quitosano/química , Gases , Adsorción , Porosidad , Formaldehído/química , NitrógenoRESUMEN
Biomass resources are widely considered potential alternatives to formaldehyde-based wood adhesives because of their abundance. In this study, an environmentally friendly biomass adhesive, carboxylated chitosan-glucose (CSC-G), was prepared using chitosan, maleic anhydride, and glucose. The structure and water resistance of the adhesive were analyzed in detail. Maleic anhydride act as a bridge connecting chitosan and glucose, giving the adhesive good water solubility and resistance. The improved water resistance of the CSC-G adhesive was attributed to the formation of covalent cross-linked structures and an increased degree of system cross-linking. Additionally, the curing temperature of the CSC-G adhesive was superior to those of previously reported polyester adhesives. This study not only expands the application scope of fishery waste, but also demonstrates its great potential for the preparation of high-performance plywood.
Asunto(s)
Adhesivos , Quitosano , Adhesivos/química , Quitosano/química , Anhídridos Maleicos , Solubilidad , Agua/químicaRESUMEN
Using chitosan as a raw material, 1,8-naphthimide as the fluorescent chromophore, and sulfur-containing compounds as the recognition groups, a novel naphthimide-functionalized chitosan probe, CS-BNS, for the detection of ClO- was successfully synthesized. The modification of chitosan was verified by SEM, XRD, FTIR, mapping, 13C-NMR, TG and the structure of the probe molecule was characterized. The identification performance of the probes was studied using UV and fluorescence spectrophotometers. The results show that CS-BNS exhibits a specific response to ClO- based on the oxidative reaction of ClO- to the recognition motifs, as well as a good resistance to interference. And the probe has high sensitivity and fast response time, and can complete the detection of ClO- in a pure water system within 60 s. The probe can also quantify ClO- (y = 30.698x + 532.37, R2 = 0.9833) with a detection limit as low as 0.27 µM. In addition, the combination of the probe with smartphone technology enables the visualization and real-time monitoring of ClO-. Moreover, an identification system for ClO- was established by combining the probe with smartphone technology, which realized the visualization and real-time monitoring of ClO-.
RESUMEN
Nowadays, the fast expansion of the economy and industry results in a considerable volume of wastewater being released, severely affecting water quality and the environment. It has a significant influence on the biological environment, both terrestrial and aquatic plant and animal life, and human health. Therefore, wastewater treatment is a global issue of great concern. Nanocellulose's hydrophilicity, easy surface modification, rich functional groups, and biocompatibility make it a candidate material for the preparation of aerogels. The third generation of aerogel is a nanocellulose-based aerogel. It has unique advantages such as a high specific surface area, a three-dimensional structure, is biodegradable, has a low density, has high porosity, and is renewable. It has the opportunity to replace traditional adsorbents (activated carbon, activated zeolite, etc.). This paper reviews the fabrication of nanocellulose-based aerogels. The preparation process is divided into four main steps: the preparation of nanocellulose, gelation of nanocellulose, solvent replacement of nanocellulose wet gel, and drying of nanocellulose wet aerogel. Furthermore, the research progress of the application of nanocellulose-based aerogels in the adsorption of dyes, heavy metal ions, antibiotics, organic solvents, and oil-water separation is reviewed. Finally, the development prospects and future challenges of nanocellulose-based aerogels are discussed.
RESUMEN
To achieve real-time monitoring of Au3+, a corn bract cellulose-based fluorescent probe MAC-1 for was synthesized. MAC-1 showed good fluorescence properties in DMF-H2O (1:9, v/v, pH = 7.4) solution, showed a fluorescence emission peak at 520 nm with quenching fluorescence properties for Au3+. The structure of MAC-1 was analyzed by SEM (Sample microstructure images), XRD (X-ray diffraction), FTIR (Fourier transform infrared spectroscopy), 1H NMR, Elemental analysis, EDS, Mapping and TG (Thermogravimetry) were analyzed. The fluorescence properties of the probe were also characterized by UV spectrophotometer and fluorescence spectrophotometer. The results showed that the recognition of Au3+ by the probe MAC-1 exhibited high selectivity and high sensitivity. Moreover, it is highly resistant to interference and has a short response time, which can be rapidly responded within 1 min. In addition, to improve the practical application of the probe, the probe was prepared as a fluorescent composite film and the fluorescence effect shown by the fluorescent composite film is consistent with the fluorescence change of the probe MAC-1 itself. The fluorescent composite film also has excellent selectivity and good overall physical and mechanical properties. This study provides a meaningful reference for the detection of Au3+ and further expands the application field of agroforestry waste.
Asunto(s)
Celulosa , Colorantes Fluorescentes , Colorantes Fluorescentes/química , Celulosa/química , Zea maysRESUMEN
In this article, a practical and metal-free method for the synthesis of poly-functionalized 3-selenyl/sulfenyl/telluriumindoles from o-alkynyl arylamines has been achieved. In this protocol, the in situ formation of selenenyl chloride, sulfenyl chloride or tellurenyl chloride is considered as the key intermediate and the 3-selenyl/sulfenyl/telluriumindoles can be obtained in good to excellent yields. Furthermore, the product 2-phenyl-3-(phenylselanyl)-1-tosyl-1H-indole can be selectively oxidized to compounds 2-phenyl-3-(phenylseleninyl)-1-tosyl-1H-indole and 2-phenyl-3-(phenylselenonyl)-1-tosyl-1H-indole in good yields.
RESUMEN
Carbon dots (CDs), as the most important type of carbon-based material, have been widely used in many fields because of their excellent properties. In particular, multicolor fluorescent CDs with high photoluminescence quantum yield are the focus of active research. Herein, red, green and blue CDs (RGB CDs) were successfully synthesized by a solvothermal method from o-phenylenediamine under different reaction conditions. The RGB-CDs have stable optical properties and significant photoluminescence characteristics. Structural and elemental analyses propose a conjugated structure and the surface state of the CDs as the main causes for the different color emission of RGB-CDs. In addition, a white fluorescent CD solution was prepared by mixing these multicolor fluorescent CDs in appropriate proportions.