RESUMEN
A bronchogenic cyst (BC) is a rare congenital cystic lesion, especially when located in the suprahyoid region of the anterior cervical front. We report a case of a male child who was misdiagnosed with a thyroglossal duct cyst due to the clinical presentation of a mass located near the anterior midline of the neck, in the region above the hyoid bone, which moved up and down with swallowing, characteristics consistent with a thyroglossal duct cyst. We excised the lesion under general anesthesia. Histopathological analysis revealed cartilage tissue, pseudostratified columnar epithelium of the cyst wall with cilia and mucous glands, finally diagnosing it as BC. BC should be considered in the differential diagnosis of neck masses.
RESUMEN
Nanofiltration membranes with both high water permeance and selectivity are perpetually studied because of their applications in water purification. However, these two critical attributes are considered to be mutually exclusive. Here, we introduce a polar solvent, dichloromethane, in place of the apolar hexane used for decades as the organic phase for membrane interfacial polymerization synthesis to solve this dilemma. When a polar solvent as the organic phase is combined with a solvent-resistant aramid nanofibrous hydrogel film as the water phase, monomer enrichment in the reaction zone leads to a polyamide nanofiltration membrane with densely distributed nanobubble features, enhanced nanoporosity, and a loosened backbone. Benefiting from these structural features, the resulting membrane exhibits superior properties with a combination of high water permeance (52.7 L m-2 h-1 bar-1) and selectivity (water/Na2SO4, 36 bar-1; NaCl/Na2SO4, 357 bar-1), outperforming traditional nanofiltration membranes. We envision that this novel technology involving polar solvent systems and the water phase of nanofibrous hydrogel would provide new opportunities for membrane development for environmental engineering.
RESUMEN
To date there are only pirfenidone (PFD) and nintedanib to be given conditional recommendation in idiopathic pulmonary fibrosis (IPF) therapies with slowing disease progression, but neither has prospectively shown a reduced mortality. It is one of the urgent topics to find effective drugs for pulmonary fibrosis in medicine. Previous studies have demonstrated that microcystin-RR (MC-RR) effectively alleviates bleomycin-induced pulmonary fibrosis, but the mechanism has not been fully elucidated yet. We further conducted a comparison of therapeutic effect on the model animals of pulmonary fibrosis between MC-RR and PFD with histopathology and the expression of the molecular markers involved in differentiation, proliferation and metabolism of myofibroblasts, a major effector cell of tissue fibrosis. The levels of the enzyme molecules for maintaining the stability of interstitial structure were also evaluated. Our results showed that MC-RR and PFD effectively alleviated pulmonary fibrosis in model mice with a decreased signaling and marker molecules associated with myofibroblast differentiation and lung fibrotic lesion. In the meantime, both MC-RR and PFD treatment are beneficial to restore molecular dynamics of interstitial tissue and maintain the stability of interstitial architecture. Unexpectedly, MC-RR, rather than PFD, showed a significant effect on inhibiting PKM2-HIF-1α signaling and reducing the level of p-STAT3. Additionally, MC-RR showed a better inhibition effect on FGFR1 expression. Given that PKM2-HIF-1α and activated STAT3 molecular present a critical role in promoting the proliferation of myofibroblasts, MC-RR as a new strategy for IPF treatment has potential advantage over PFD.
Asunto(s)
Subunidad alfa del Factor 1 Inducible por Hipoxia , Microcistinas , Fibrosis Pulmonar , Piridonas , Animales , Microcistinas/toxicidad , Ratones , Subunidad alfa del Factor 1 Inducible por Hipoxia/metabolismo , Fibrosis Pulmonar/tratamiento farmacológico , Fibrosis Pulmonar/inducido químicamente , Piridonas/farmacología , Piridonas/uso terapéutico , Bleomicina , Transducción de Señal/efectos de los fármacos , Proteínas de la Membrana/metabolismo , Ratones Endogámicos C57BL , Miofibroblastos/efectos de los fármacos , Fibrosis Pulmonar Idiopática/tratamiento farmacológico , Masculino , Modelos Animales de Enfermedad , Piruvato QuinasaRESUMEN
A kirigami-engineered composite hydrogel membrane is exploited for the construction of three dimensional (3D) solar-tracking evaporator arrays with outstanding evaporation performance and salt tolerance. The hybrid nanofiber network in the hydrogel membrane offers favorable water transport dynamics combined with excellent structural robustness, which are beneficial for the engineering of 3D dynamic structures. Periodic triangular cuts patterned into the membrane allow formation and reconfiguration of 3D conical arrays controlled by uniaxial stretching. With these structures, the tilt angles of the membrane surface are actively tuned to follow the solar trajectory, leading to a solar evaporation rate ~80% higher than that of static planar devices. Furthermore, the tapered 3D flaps and their micro-structured surfaces are capable of localized salt crystallization for prolonged solar desalination, enabling a stable evaporation rate of 3.4 kg m-2 hour-1 even in saturated brine. This versatile design may facilitate the implementation of solar evaporators for desalination and provide inspirations for other soft functional devices with dynamic 3D configurations.
RESUMEN
In the electrocatalytic CO2 reduction reaction (CO2RR), metal catalysts with an oxidation state generally demonstrate more favorable catalytic activity and selectivity than their corresponding metallic counterparts. However, the persistence of oxidative metal sites under reductive potentials is challenging since the transition to metallic states inevitably leads to catalytic degradation. Herein, a thorough review of research on oxidation-state stabilization in the CO2RR is presented, starting from fundamental concepts and highlighting the importance of oxidation state stabilization while revealing the relevance of dynamic oxidation states in product distribution. Subsequently, the functional mechanisms of various oxidation-state protection strategies are explained in detail, and in situ detection techniques are discussed. Finally, the prevailing and prospective challenges associated with oxidation-state protection research are discussed, identifying innovative opportunities for mechanistic insights, technology upgrades, and industrial platforms to enable the commercialization of the CO2RR.
RESUMEN
Developing artificial enzymes based on organic molecules or polymers for reactive oxygen species (ROS)-related catalysis has broad applicability. Herein, inspired by porphyrin-based heme mimics, we report the synthesis of polyphthalocyanine-based conjugated polymers (Fe-PPc-AE) as a new porphyrin-evolving structure to serve as efficient and versatile artificial enzymes for augmented reactive oxygen catalysis. Owing to the structural advantages, such as enhanced π-conjugation networks and π-electron delocalization, promoted electron transfer, and unique Fe-N coordination centers, Fe-PPc-AE showed more efficient ROS-production activity in terms of Vmax and turnover numbers as compared with porphyrin-based conjugated polymers (Fe-PPor-AE), which also surpassed reported state-of-the-art artificial enzymes in their activity. More interestingly, by changing the reaction medium and substrates, Fe-PPc-AE also revealed significantly improved activity and environmental adaptivity in many other ROS-related biocatalytic processes, validating the potential of Fe-PPc-AE to replace conventional (poly)porphyrin-based heme mimics for ROS-related catalysis, biosensors, or biotherapeutics. It is suggested that this study will offer essential guidance for designing artificial enzymes based on organic molecules or polymers.
Asunto(s)
Hemo , Porfirinas , Hemo/química , Oxígeno/química , Especies Reactivas de Oxígeno , Porfirinas/química , Catálisis , PolímerosRESUMEN
Mechanoelectrical energy conversion is a potential solution for the power supply of miniaturized wearable and implantable systems; yet it remains challenging due to limited current output when exploiting low-frequency motions with soft devices. We report a design of a hydrogel generator with mechanoionic current generation amplified by orders of magnitudes with engineered structural and chemical asymmetry. Under compressive loading, relief structures in the hydrogel intensify net ion fluxes induced by deformation gradient, which synergize with asymmetric ion adsorption characteristics of the electrodes and distinct diffusivity of cations and anions in the hydrogel matrix. This engineered mechanoionic process can yield 4 mA (5.5 A m-2) of peak current under cyclic compression of 80 kPa applied at 0.1 Hz, with the transferred charge reaching up to 916 mC m-2 per cycle. The high current output of this miniaturized hydrogel generator is beneficial for the powering of wearable devices, as exemplified by a controlled drug-releasing system for wound healing. The demonstrated mechanisms for amplifying mechanoionic effect will enable further designs for a variety of self-powered biomedical systems.
RESUMEN
Efficient energy storage systems are crucial for the optimal utilization of renewable energy. Sodium-ion batteries (SIBs) are considered potential substitutes for next-generation low-cost energy storage systems due to the low cost and abundance of sodium resources. However, the industrialization of SIBs faces a great challenge in terms of the anode. Hard carbon could be a promising anode material due to its high capacity and low cost which originates from biomass. This study used pre-treatment and template carbonization methods to extract a hard carbon material from a large amount of discarded biomass in bamboo powder waste. This material has a good initial Coulombic efficiency of 78.6 % and good cycling stability when applied to sodium ion batteries.Typically, the optimal hard carbon material is used as the anode to prepare sodium ion battery prototypes to demonstrate their potential applications. The anode exhibited excellent sodium storage performance with a reversible capacity of 303â mAh â g-1 at 1â C rate and good cycling performance, retaining 92.0 % of its capacity after 100â cycles. These results demonstrate that BPPHC is a promising candidate for anode material in sodium-ion batteries. This work suggests that bamboo powder could be a low-cost anode material for SIBs.
RESUMEN
Recently, flexible temperature sensors have attracted significant interest due to their wide-ranging applications in areas such as biomedical monitoring, environmental monitoring, electronic skin, and intelligent robots. However, a combination of high sensitivity and high resolution remains a critical challenge. These properties depend on the synthesis techniques of the sensitive materials. In this work, we use a laser irradiation method to prepare a silver nanoparticle-modified carbon nanotube (Ag-MWCNT) which is further mixed with poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS). The developed temperature sensor exhibited a high sensitivity of -0.45% °C-1 and linearity with an R2 value of 0.998 in the temperature range of 25-80 °C. Additionally, the sensor demonstrated remarkable repeatability, making it suitable for real-time temperature monitoring of the human body and environment. This temperature sensor is successfully demonstrated in practical applications such as monitoring the temperature of various parts of the human body and sensing the spatial temperature. These demonstrations highlight their significant potential in electronic skin and other related fields.
RESUMEN
With an aging population, the osteoporotic vertebral compression fracture (OVCF) has become a constant concern for its physical and neurological complications, such as spinal kyphosis and refractory pains. Compared with traditional conservative treatments, the open surgery is more superior in some ways because of its direct decompression and correction. Various operation methods applying to different indications have been developed to deal with different fracture situations, including anterior, posterior, and combined surgery. In this review, we have concluded the latest developments of the surgery treating OVCF and the internal fixation as references for spinal surgeons of the choice of suitable treatments.
Asunto(s)
Fracturas por Compresión , Cifosis , Fracturas Osteoporóticas , Fracturas de la Columna Vertebral , Humanos , Anciano , Fracturas de la Columna Vertebral/cirugía , Fracturas de la Columna Vertebral/etiología , Fracturas por Compresión/cirugía , Fracturas Osteoporóticas/cirugía , Fijación Interna de Fracturas/métodos , Resultado del Tratamiento , Cifosis/cirugía , Vértebras Lumbares/cirugía , Estudios RetrospectivosRESUMEN
Engineering heterogeneous hydrogels with distinct phases at various lengths, which resemble biological tissues with high complexity, remains challenging by existing fabricating techniques that require complicated procedures and are often only applicable at bulk scales. Here, inspired by ubiquitous phase separation phenomena in biology, we present a one-step fabrication method based on aqueous phase separation to construct two-aqueous-phase gels that comprise multiple phases with distinct physicochemical properties. The gels fabricated by this approach exhibit enhanced interfacial mechanics compared with their counterparts obtained from conventional layer-by-layer methods. Moreover, two-aqueous-phase gels with programmable structures and tunable physicochemical properties can be conveniently constructed by adjusting the polymer constituents, gelation conditions, and combining different fabrication techniques, such as 3D-printing. The versatility of our approach is demonstrated by mimicking the key features of several biological architectures at different lengths: macroscale muscle-tendon connections; mesoscale cell patterning; microscale molecular compartmentalization. The present work advances the fabrication approach for designing heterogeneous multifunctional materials for various technological and biomedical applications.
RESUMEN
Hydrogels capable of transforming in response to a magnetic field hold great promise for applications in soft actuators and biomedical robots. However, achieving high mechanical strength and good manufacturability in magnetic hydrogels remains challenging. Here, inspired by natural load-bearing soft tissues, a class of composite magnetic hydrogels is developed with tissue-mimetic mechanical properties and photothermal welding/healing capability. In these hydrogels, a hybrid network involving aramid nanofibers, Fe3O4 nanoparticles, and poly(vinyl alcohol) is accomplished by a stepwise assembly of the functional components. The engineered interactions between nanoscale constituents enable facile materials processing and confer a combination of excellent mechanical properties, magnetism, water content, and porosity. Furthermore, the photothermal property of Fe3O4 nanoparticles organized around the nanofiber network allows near-infrared welding of the hydrogels, providing a versatile means to fabricate heterogeneous structures with custom designs. Complex modes of magnetic actuation are made possible with the manufactured heterogeneous hydrogel structures, suggesting opportunities for further applications in implantable soft robots, drug delivery systems, human-machine interactions, and other technologies.
RESUMEN
OBJECTIVES: Shelter hospital was an alternative way to provide large-scale medical isolation and treatment for people with mild coronavirus disease 2019 (COVID-19). Due to various reasons, patients admitted to the large shelter hospital was reported high level of psychological distress, so did the healthcare workers. This study aims to introduce a comprehensive and multifaceted psychosocial crisis intervention model. METHODS: The psychosocial crisis intervention model was provided to 200 patients and 240 healthcare workers in Wuhan Wuchang shelter hospital. Patient volunteers and organized peer support, client-centered culturally sensitive supportive care, timely delivery of scientific information about COVID-19 and its complications, mental health knowledge acquisition of non-psychiatric healthcare workers, group activities, counseling and education, virtualization of psychological intervention, consultation and liaison were exhibited respectively in the model. Pre-service survey was done in 38 patients and 49 healthcare workers using the Generalized Anxiety Disorder 7-item (GAD-7) scale, the Patient Health Questionnaire 2-item (PHQ-2) scale, and the Primary Care PTSD screen for the Diagnostic and Statistical Manual of Mental Disorders, 5th edition (PC-PTSD-5). Forty-eight healthcare workers gave feedback after the intervention. RESULTS: The psychosocial crisis intervention model was successfully implemented by 10 mental health professionals and was well-accepted by both patients and healthcare workers in the shelter hospital. In pre-service survey, 15.8% of 38 patients were with anxiety, 55.3% were with stress, and 15.8% were with depression; 16.3% of 49 healthcare workers were with anxiety, 26.5% were with stress, and 22.4% were with depression. In post-service survey, 62.5% of 48 healthcare workers thought it was very practical, 37.5% thought more practical; 37.5% of them thought it was very helpful to relief anxiety and insomnia, and 27.1% thought much helpful; 37.5% of them thought it was very helpful to recognize patients with anxiety and insomnia, and 29.2% thought much helpful; 35.4% of them thought it was very helpful to deal with patients' anxiety and insomnia, and 37.5% thought much helpful. CONCLUSIONS: Psychological crisis intervention is feasible, acceptable, and associated with positive outcomes. Future tastings of this model in larger population and different settings are warranted.
Asunto(s)
COVID-19 , Trastornos del Inicio y del Mantenimiento del Sueño , Humanos , Intervención en la Crisis (Psiquiatría) , Intervención Psicosocial , SARS-CoV-2 , Salud Mental , Depresión/epidemiología , Personal de Salud/psicología , Ansiedad/terapia , Ansiedad/etiologíaRESUMEN
Electroconductive hydrogels have been applied in implantable bioelectronics, tissue engineering platforms, soft actuators, and other emerging technologies. However, achieving high conductivity and mechanical robustness remains challenging. Here we report an approach to fabricating electroconductive hydrogels based on the hybrid assembly of polymeric nanofiber networks. In these hydrogels, conducting polymers self-organize into highly connected three dimensional nanostructures with an ultralow threshold (~1 wt%) for electrical percolation, assisted by templating effects from aramid nanofibers, to achieve high electronic conductivity and structural robustness without sacrificing porosity or water content. We show that a hydrogel composed of polypyrrole, aramid nanofibers and polyvinyl alcohol achieves conductivity of ~80 S cm-1, mechanical strength of ~9.4 MPa and stretchability of ~36%. We show that patterned conductive nanofiber hydrogels can be used as electrodes and interconnects with favorable electrochemical impedance and charge injection capacity for electrophysiological applications. In addition, we demonstrate that cardiomyocytes cultured on soft and conductive nanofiber hydrogel substrates exhibit spontaneous and synchronous beating, suggesting opportunities for the development of advanced implantable devices and tissue engineering technologies.
RESUMEN
We report multifunctional tendon-mimetic hydrogels constructed from anisotropic assembly of aramid nanofiber composites. The stiff nanofibers and soft polyvinyl alcohol in these anisotropic composite hydrogels (ACHs) mimic the structural interplay between aligned collagen fibers and proteoglycans in tendons. The ACHs exhibit a high modulus of ~1.1 GPa, strength of ~72 MPa, fracture toughness of 7333 J/m2, and many additional characteristics matching those of natural tendons, which was not achieved with previous synthetic hydrogels. The surfaces of ACHs were functionalized with bioactive molecules to present biophysical cues for the modulation of morphology, phenotypes, and other behaviors of attached cells. Moreover, soft bioelectronic components can be integrated on ACHs, enabling in situ sensing of various physiological parameters. The outstanding mechanics and functionality of these tendon mimetics suggest their further applications in advanced tissue engineering, implantable prosthetics, human-machine interactions, and other technologies.
Asunto(s)
Nanofibras , Andamios del Tejido , Humanos , Andamios del Tejido/química , Hidrogeles/química , Ingeniería de Tejidos , Alcohol Polivinílico/química , Tendones , Nanofibras/químicaRESUMEN
BACKGROUND: Studying the role of psychological resilience in self-perceived stress and mental disorders among family members of medical workers can help us understand its importance in mental health care and guide us to develop psychological intervention strategies for family members of medical workers. METHODS: A total of 671 family members of medical workers were enrolled. Self-perceived stress, resilience, depression symptoms, anxiety symptoms, and post-traumatic stress disorder (PTSD) symptoms were measured in our research. RESULTS: The prevalence of anxiety, depression, and PTSD symptoms among relatives of medical workers were 49.0 %, 12.2 %, and 20.3 % respectively during the COVID-19 epidemic. According to the Multivariate regression model, compared with family members of doctor, family members of nurse and medical technologists were more likely to report anxiety symptoms. Female members of medical staff were more likely to have PTSD symptoms than male counterparts; and family members of medical technologist appeared to less likely have PTSD symptoms than family members of either doctor or nurse. The mediation analysis confirmed that mental resilience mediated the relationship between self-perceived stress and anxiety symptoms. LIMITATIONS: Single cross-sectional study design without the follow-up comparative analysis, only self-reported measurements were adopted, and inadequate pre-set demographic variables. CONCLUSIONS: To the best of our knowledge, our study firstly demonstrated the risk of psychological distress present in the family members of medical providers during the COVID-19 epidemic. Meanwhile, our findings highlighted the importance of mental resilience in family members of frontline medical workers as it mediated the relationship between self-perceived stress and anxiety symptoms.
Asunto(s)
COVID-19 , Trastornos por Estrés Postraumático , Humanos , Masculino , Femenino , SARS-CoV-2 , Estudios Transversales , Depresión/epidemiología , Depresión/psicología , Salud Mental , Personal de Salud/psicología , Ansiedad/epidemiología , Ansiedad/psicología , Trastornos por Estrés Postraumático/epidemiologíaRESUMEN
Strand-specific RNA-seq is a powerful tool for the discovery of novel transcripts, annotation of genomes, and profiling of gene expression levels. Tn5 transposase has been successfully applied in massive-scale sequencing projects; in particular, Tn5 adaptor modification is used in epigenetics, genomic structure, and chromatin visualization. We developed a novel dU-adaptor-assembled Tn5-mediated strand-specific RNA-sequencing protocol and compared this method with the leading dUTP method in terms of experimental procedure and multiple quality metrics of the generated libraries. The results showed that the dU-Tn5 method is easy to operate and generates a strand-specific RNA-seq library of comparable quality considering library complexity, strand-specificity, evenness, and continuity of annotated transcript coverage. We also evaluated the performance of the dU-Tn5 method in identifying nitrogen-responsive protein-coding genes and long non-coding RNAs in soybean roots. The results indicated that ~62-70% of differentially expressed genes detected from conventional libraries were also detected in dU-Tn5 libraries, indicating good agreement of our method with the current standard; moreover, their fold-changes were highly correlated (R>0.9). Thus, our method provides a promising 'do-it-yourself' stranded RNA-seq procedure for gene expression profiling.
Asunto(s)
Cromatina , Perfilación de la Expresión Génica , Biblioteca de Genes , ADN Complementario/genética , Perfilación de la Expresión Génica/métodos , Análisis de Secuencia de ARN/métodos , Secuenciación de Nucleótidos de Alto Rendimiento/métodos , ARNRESUMEN
Kirigami designs are advantageous for the construction of wearable electronics due to their high stretchability and conformability on the 3D dynamic surfaces of the skin. However, suitable materials technologies that enable robust kirigami devices with desired functionality for skin-interfaces remain limited. Here, a versatile materials platform based on a composite nanofiber framework (CNFF) is exploited for the engineering of wearable kirigami electronics. The self-assembled fibrillar network involving aramid nanofibers and poly(vinyl alcohol) combines high toughness, permeability, and manufacturability, which are desirable for the fabrication of hybrid devices. Multiscale simulations are conducted to explain the high fracture resistance of the CNFF-based kirigami structures and provide essential guidance for the design, which can be further generalized to other kirigami devices. Various microelectronic sensors and electroactive polymers are integrated onto a CNFF-based materials platform to achieve electrocardiogram (ECG), electromyogram (EMG), skin-temperature measurements, and measurement of other physiological parameters. These mechanically robust, multifunctional, lightweight, and biocompatible kirigami devices can shed new insights for the development of advanced wearable systems and human-machine interfaces.
Asunto(s)
Nanofibras , Dispositivos Electrónicos Vestibles , Humanos , Electrónica , Polímeros/químicaRESUMEN
Background: As numerous patients with depression have to be hospitalized because of various reasons, the demand far exceeds the limited bed count in the psychiatry department. Controlling the length of stay (LOS) of the patient is gradually being considered an effective method to alleviate this problem. Given the lack of statistical evidence of the LOS of patients with major depressive disorder (MDD) in China and the strain on the limited psychiatric resources, the purpose of our study was to investigate the LOS of patients with MDD among in-patient samples and to analyze related factors of the LOS in China by building a regression model. Method: The data were exported from the electronic medical record system. A total of three categories of independent variables were enrolled in our study, namely, demographic, clinical, and biochemical. Univariate analysis and binominal regression analysis were applied comprehensively to find the factors related to the LOS among MDD samples. The discrimination accuracy of the model was evaluated by the receiver operating characteristic (ROC) analysis. ROC analysis indicated that the discrimination accuracy of our model was acceptable (AUC = 0.790, 95% CI = 0.714-0.865, P < 0.001). Result: A total of 254 patients were finally brought into analysis after filtering. Regression analysis indicated that abnormal LDL was the only risk factor of long LOS (OR = 3.352, 95% CI = 1.087-10.337, P = 0.035) among all the kinds of variables. Notably, in the statistically irrelevant factors of the LOS, the category of anti-depressant drugs [serotonin-norepinephrine reuptake inhibitor (SNRI) or selective serotonin reuptake inhibitor (SSRI)] prescribed to patients with MDD was not associated statistically with the LOS, which was against our initial hypothesis that the LOS of patients with MDD treated with SNRI would vary from that of the patients treated with SSRI. Conclusion: Up to our knowledge, our research is the first study to show the potential factors related to the LOS from various domains, especially biochemical indexes, and the effect of drugs, among clinical patients with MDD in China. Our results could provide a theoretical reference for efficient psychiatry hospitalization management and prioritization of allocating medical resources. Future studies are required for updating independent variables which are potentially related to the LOS and verifying existing results in a larger sample.
Asunto(s)
Trastorno Depresivo Mayor , Inhibidores de Captación de Serotonina y Norepinefrina , Trastorno Depresivo Mayor/tratamiento farmacológico , Trastorno Depresivo Mayor/psicología , Humanos , Tiempo de Internación , Estudios Retrospectivos , Inhibidores Selectivos de la Recaptación de Serotonina/uso terapéutico , Inhibidores de Captación de Serotonina y Norepinefrina/uso terapéuticoRESUMEN
Three-dimensional (3D) microfibrillar network represents an important structural design for various natural tissues and synthetic aerogels. Despite extensive efforts, achieving high mechanical properties for synthetic 3D microfibrillar networks remains challenging. Here, we report ultrastrong polymeric aerogels involving self-assembled 3D networks of aramid nanofiber composites. The interactions between the nanoscale constituents lead to assembled networks with high nodal connectivity and strong crosslinking between fibrils. As revealed by theoretical simulations of 3D networks, these features at fibrillar joints may lead to an enhancement of macroscopic mechanical properties by orders of magnitude even with a constant level of solid content. Indeed, the polymeric aerogels achieved both high specific tensile modulus of ~625.3 MPa cm3 g-1 and fracture energy of ~4700 J m-2, which are advantageous for diverse structural applications. Furthermore, their simple processing techniques allow fabrication into various functional devices, such as wearable electronics, thermal stealth, and filtration membranes. The mechanistic insights and manufacturability provided by these robust microfibrillar aerogels may create further opportunities for materials design and technological innovation.