Operational Deflection Shape Measurements on Bladed Disks with Continuous Scanning Laser Doppler Vibrometry.

The continuous scanning laser Doppler vibrometry (CSLDV) technique is usually used to evaluate the vibration operational deflection shapes (ODSs) of structures with continuous surfaces. In this paper, an extended CSLDV is demonstrated to measure the non-continuous surface of the bladed disk and to obtain the ODS efficiently. For a bladed disk, the blades are uniformly distributed on a given disk. Although the ODS of each blade can be derived from its response data along the scanning path with CSLDV, the relative vibration direction between different blades cannot be determined from those data. Therefore, it is difficult to reconstruct the complete vibration mode of the whole blade disk. In order to measure the complete ODS of the bladed disk, a method based on ODS frequency response functions (ODS FRFs) has been proposed. While the ODS of each blade is measured by designing the suitable scanning paths in CSLDV, an additional response signal is obtained at a fixed point as the reference signal to identify the relative vibration phase between the blade and the blade of the bladed disk. Finally, a measurement is performed with a simple bladed disk and the results demonstrate the feasibility and effectiveness of the proposed extended CSLDV method.

Preparation and Applications of Electrospun Nanofibers for Wearable Biosensors.

The emergence of nanotechnology has provided many new ideas and innovations in the field of biosensors. Electrospun nanofibers have many excellent properties such as high specific surface area, high porosity, low cost, high efficiency, and they can be combined with a variety of sensors. These remarkable features have a wide range of applications in the field of sensors such as monitoring air pollutants, highly sensitive pressure sensors, and biosensors for monitoring the pulse of the body. This paper summarizes the working principle and influencing factors of electrospinning nanofibers, and illustrates their applications in wearable biosensors.

Development of the Biomaterials Technology for the Infection Resistance.

Infections caused by microbial proliferation are one of the common issues and serious threats to the medical care, and they usually result in disease spread. Therefore, it is a significant issue for developing the antiinfective biomaterials to control this problem, according to the specific clinical application. Meanwhile, all their properties, the best anti-infective performance, the safe biocompatibility and the appropriate tissue interactions must be conformed to each other. At present, technologies are developing novel biomaterials and surfaces endowed with anti-infective properties, relying either on bactericidal or anti-biofilm activities. This review focuses on thoroughly summarizing numerous kinds of antibacterial biomaterials, including the antibacterial matrix biomaterials, antibacterial coatings and films, nanostructured materials and antibacterial fibers. Among these strategies, the utilization of bio-glass base and graphene base antibacterial matrix, and their effects on the antibiosis mechanism were emphatically discussed. Simultaneously, the effects and mechanisms of nano-coated metallic ions are also mentioned. Overall, there is a wealth of technical solutions to contrast the establishment of an implant infection. The lack of well-structured prospective multicenter clinical trials hinders the achievement of conclusive data on the efficacy and comparative performance of antibacterial biomaterials.