RESUMEN
Body weight, body mass index (BMI), Nutrition Risk Screening 2002 (NRS2002), and prognostic nutritional index (PNI) are among vital nutrition status indices employed during cancer treatment. These have also been associated with levels of blood chemistry panels (BCPs), which are touted as significant indicators of disease prognosis. However, it remains unclear which nutrition status index better predicts future trends in specific BCPs. Using the records of 407 cancer patients, we retrospectively examined the potential of nutritional status indices at baseline for predicting changes in specific BCPs over a 6-week period. Generally, both serum biochemical parameters and nutrition status indices fluctuated over the study period among study participants. PNI was often linearly associated with blood cell counts (white blood cells [WBCs] and hemoglobin) compared with anthropometric-based nutrition status indices. Increase in body weight was protective against having abnormal lymphocyte levels at 6 weeks (odds ratio [OR]: 0.960-0.974; CI: 0.935-0.997; P < 0.05), while increase in baseline PNI was associated with 0.865-0.941 and 0.675-0.915 odds of having future abnormal WBC and lymphocyte levels, respectively. Increases in PNI were also protective against having future abnormal albumin levels (OR: 0.734-0.886) and 8.5-12.5% decreases in the odds of having an abnormal C-reactive protein level in subsequent visits. Changes in NRS2002 tended to be associated with the odds of having future abnormal blood glucose levels. In conclusion, the serum biochemistry-derived nutrition status index, PNI, is a more consistent measure as an early indicator to track the trends of future changes in the BCPs of cancer patients. This implies that PNI could be targeted as an early-warning measure with relevant preventive interventions for patients at risk of malnutrition.
RESUMEN
SCOPE: Grifola frondosa has been shown to induce immune modulatory, modulate autophagy, and apoptosis in cancer cells. However, little is known about its potential for managing tumor progression as an adjunct to nutrient restriction. METHODS AND RESULTS: Water extract produces a G. frondosa polysaccharide-protein complex (G. frondosa PPC) of average molecular weight of 46.48 kDa, with glucose (54.8%) as the main constituent. Under serum-restricted conditions, G. frondosa PPC can significantly inhibit MC38 colorectal tumor cell migration in vitro. Under alternate-day fasting condition, G. frondosa PPC can only significantly inhibit the growth of subcutaneous (s.c.) tumor, but is feeble in halting its spread in the intraperitoneal (i.p.) cavity in tumor-bearing mice. Histopathological examination and Raman imaging show a significant increase in lipid content in the tumor microenvironment (TME) tissue of the s.c. tumor-bearing mice. G. frondosa PPC significantly increases C17:0 and C24:0 saturated fatty acids and significantly decreases C16:1 and C18:1 monounsaturated fatty acids in the TME of s.c. tumor-bearing mice compared with the i.p. cavity model. CONCLUSION: G. frondosa PPC significantly inhibits tumor growth in s.c. tumor-bearing mice under intermittent fasting conditions by altering the fatty acid composition of the TME.
Asunto(s)
Neoplasias del Colon , Ayuno , Grifola , Animales , Grifola/química , Neoplasias del Colon/tratamiento farmacológico , Neoplasias del Colon/patología , Línea Celular Tumoral , Ratones , Polisacáridos/farmacología , Microambiente Tumoral/efectos de los fármacos , Movimiento Celular/efectos de los fármacos , Ácidos Grasos/farmacología , Masculino , Ratones Endogámicos C57BL , Agua/químicaRESUMEN
In spite of recent advances in the field of undernutrition, current dietary therapy relying on the supply of high protein high calorie formulas is still plagued with transient recovery of impaired organs resulting in significant relapse of cases. This is partly attributed to the inadequacy of current research models in recapitulating clinical undernutrition for mechanistic exploration. Using 1636 Macaca fascicularis monkeys, a human-relevant criterion for determining undernutrition weight-for-age z-score (WAZ), with a cutoff point of ≤ -1.83 is established as the benchmark for identifying undernourished nonhuman primates (U-NHPs). In U-NHPs, pathological anomalies in multi-organs are revealed. In particular, severe dysregulation of hepatic lipid metabolism characterized by impaired fatty acid oxidation due to mitochondria dysfunction, but unlikely peroxisome disorder, is identified as the anchor metabolic aberration in U-NHPs. Mitochondria dysfunction is typified by reduced mito-number, accumulated long-chain fatty acids, and disruption of OXPHOS complexes. Soy peptide-treated U-NHPs increase in WAZ scores, in addition to attenuated mitochondria dysfunction and restored OXPHOS complex levels. Herein, innovative criteria for identifying U-NHPs are developed, and unknown molecular mechanisms of undernutrition are revealed hitherto, and it is further proved that soypeptide supplementation reprogramed mitochondrial function to re-establish lipid metabolism balance and mitigated undernutrition.
Asunto(s)
Modelos Animales de Enfermedad , Hígado , Macaca fascicularis , Desnutrición , Animales , Desnutrición/metabolismo , Hígado/metabolismo , Hígado/efectos de los fármacos , Suplementos Dietéticos , Proteínas de Soja/metabolismo , Proteínas de Soja/farmacología , Metabolismo de los Lípidos/efectos de los fármacos , MasculinoRESUMEN
In this study, edible bird's nest (EBN) was proven to be a suitable source of bioactive peptides via enzymatic hydrolysis. The ultrafiltration component of the EBN peptides (EBNPs, Mw < 3 000 Da) could be responsible for moderate moisture retention and filaggrin synthesis. It was found that EBNP had a great capacity to protect HaCaT keratinocytes from DNA damage caused by UVB-irradiation and enhance wound healing by increasing the migratory and proliferative potential of cells. Furthermore, the external application of EBNP could effectively repair high glycolic acid concentration-induced skin burns in mice. A total of 1 188 peptides, predominantly the hydrophobic amino acids (e.g., Leu, Val, Tyr, Phe), were identified in the EBNP by liquid chromatography with tandem mass spectrometry (LC-MS/MS). Molecular docking showed that hydrophobic tripeptides from EBNP had a good binding affinity to proton-dependent oligopeptide transporter PepT1. Our data indicated that the hydrophobic amino acid-rich EBNP plays an important role in skin wound healing.
Asunto(s)
Aves , Proteínas Filagrina , Péptidos , Hidrolisados de Proteína , Piel , Cicatrización de Heridas , Animales , Cicatrización de Heridas/efectos de los fármacos , Hidrolisados de Proteína/química , Hidrolisados de Proteína/metabolismo , Ratones , Piel/química , Piel/metabolismo , Humanos , Péptidos/química , Péptidos/metabolismo , Aves/metabolismo , Simulación del Acoplamiento Molecular , Queratinocitos/metabolismo , Queratinocitos/efectos de los fármacos , Espectrometría de Masas en Tándem , Masculino , Proteínas Aviares/química , Proteínas Aviares/metabolismo , Transporte Biológico , Células HaCaT , Absorción CutáneaRESUMEN
Delivering bioactive peptides orally is hampered by poor absorption across the gastrointestinal barrier. Using the walnut-derived peptide PW5, PPKNW, we explored whether coformulation of peptides with absorption enhancer sodium N-[8-(2-hydroxybenzoyl)aminocaprylate] (SNAC) could improve the intestinal absorption of orally-administered bioactive peptides. Herein, the application of SNAC enhanced the absorption efficiency of PW5 in a non-everted gut sac model. Particle size distribution (1 027.8 ± 6.74 nm) and zeta potential (-2.89 ± 0.07 mV) of the PW5-SNAC complex were significantly greater than that of individual PW5 and SNAC. Scanning electron microscopy revealed that SNAC application could aggravate the surface roughness and reduce the compact structure of PW5. It further showed that PW5 and SNAC binds through an endothermic process underpinned by hydrogen bond and van der Waals forces and that SNAC could bound primarily to the internal calyx of PW5. These findings are helpful for the effective delivery of bioactive peptides.
Asunto(s)
Caprilatos , Sodio , Sodio/farmacología , Absorción Intestinal , Péptidos/farmacologíaRESUMEN
The paper presents the design and fabrication of a low-cost and easy-to-fabricate laser-induced graphene sensor together with its implementation for multi-sensing applications. Laser-irradiation of commercial polymer film was applied for photo-thermal generation of graphene. The graphene patterned in an interdigitated shape was transferred onto Kapton sticky tape to form the electrodes of a capacitive sensor. The functionality of the sensor was validated by employing them in electrochemical and strain-sensing scenarios. Impedance spectroscopy was applied to investigate the response of the sensor. For the electrochemical sensing, different concentrations of sodium sulfate were prepared, and the fabricated sensor was used to detect the concentration differences. For the strain sensing, the sensor was deployed for monitoring of human joint movements and tactile sensing. The promising sensing results validating the applicability of the fabricated sensor for multiple sensing purposes are presented.
RESUMEN
The paper highlights some of the significant works done in the field of medical and biomedical sensing using silicon-based technology. The use of silicon sensors is one of the pivotal and prolonged techniques employed in a range of healthcare, industrial and environmental applications by virtue of its distinct advantages over other counterparts in Microelectromechanical systems (MEMS) technology. Among them, the sensors for biomedical applications are one of the most significant ones, which not only assist in improving the quality of human life but also help in the field of microfabrication by imparting knowledge about how to develop enhanced multifunctional sensing prototypes. The paper emphasises the use of silicon, in different forms, to fabricate electrodes and substrates for the sensors that are to be used for biomedical sensing. The electrical conductivity and the mechanical flexibility of silicon vary to a large extent depending on its use in developing prototypes. The article also explains some of the bottlenecks that need to be dealt with in the current scenario, along with some possible remedies. Finally, a brief market survey is given to estimate a probable increase in the usage of silicon in developing a variety of biomedical prototypes in the upcoming years.
Asunto(s)
Técnicas Biosensibles , Nanocables/química , Silicio/química , Investigación Biomédica/métodos , Electrodos , Humanos , MicrotecnologíaRESUMEN
This paper provides a substantial review of some of the significant research done on the fabrication and implementation of laser-assisted printed flexible sensors. In recent times, using laser cutting to develop printed flexible sensors has become a popular technique due to advantages such as the low cost of production, easy sample preparation, the ability to process a range of raw materials, and its usability for different functionalities. Different kinds of laser cutters are now available that work on samples very precisely via the available laser parameters. Thus, laser-cutting techniques provide huge scope for the development of prototypes with a varied range of sizes and dimensions. Meanwhile, researchers have been constantly working on the types of materials that can be processed, individually or in conjugation with one another, to form samples for laser-ablation. Some of the laser-printed techniques that are commonly considered for fabricating flexible sensors, which are discussed in this paper, include nanocomposite-based, laser-ablated, and 3D-printing. The developed sensors have been used for a range of applications, such as electrochemical and strain-sensing purposes. The challenges faced by the current printed flexible sensors, along with a market survey, are also outlined in this paper.
RESUMEN
This paper showcases a substantial review on some of the significant work done on 3D printing of sensors for biomedical applications. The importance of 3D printing techniques has bloomed in the sensing world due to their essential advantages of quick fabrication, easy accessibility, processing of varied materials and sustainability. Along with the introduction of the necessity and influence of 3D printing techniques for the fabrication of sensors for different healthcare applications, the paper explains the individual methodologies used to develop sensing prototypes. Six different 3D printing techniques have been explained in the manuscript, followed by drawing a comparison between them in terms of their advantages, disadvantages, materials being processed, resolution, repeatability, accuracy and applications. Finally, a conclusion of the paper is provided with some of the challenges of the current 3D printing techniques about the developed sensing prototypes, their corresponding remedial solutions and a market survey determining the expenditure on 3D printing for biomedical sensing prototypes.