Mechanism study of toluene removal using iron/nickel bimetallic catalysts supported on biochar.

The present study utilized rice husk biomass as a carrier to synthesize rice husk biochar loaded with iron and nickel. Mono-metallic and bimetallic catalysts were prepared for the removal of toluene as the tar model. The efficiency of the catalysts for the removal of toluene was investigated, and finally, the removal mechanisms of mono-metallic and bimetallic catalysts for toluene were revealed. The experimental results showed that the bimetallic-loaded biochar catalysts had excellent toluene removal performance, which was closely related to the ratio of loaded Fe and Ni. Among them, the catalyst DBC-Fe2.5 %-Ni2.5 % (2.5 wt% iron loading and 2.5 wt% nickel loading) obtained through secondary calcination at 700 °C achieved the highest toluene removal efficiency of 92.76 %. The elements of Fe and Ni in the catalyst were uniformly dispersed on the surface and in the pores of the biochar, and the catalyst had a layered structure with good adsorption. Under the interaction of Fe and Ni, the agglomeration and sintering of Ni were reduced, and the surface acidity of the catalyst was increased, the surface acidity was favorable for toluene removal. The iron­nickel catalyst did not form significant alloys when calcined at 400 °C, whereas strong metal interactions occurred at 700 °C, resulting in the formation of Fe0.64Ni0.36 alloy and NiFe2O4 alloy. This NiFe alloy had abundant active sites to enhance the catalytic cracking of toluene and provide lattice oxygen for the reaction. Furthermore, the functional groups on the catalyst surface also had an impact on toluene removal. The catalyst prepared in this paper reduces the cost of tar removal, can be applied to the removal of industrial pollutant tars, reduces the pollution of the environment, and provides theoretical guidance and technical reference for the efficient removal of tar.

EROSION III: A Multicenter RCT of OCT-Guided Reperfusion in STEMI With Early Infarct Artery Patency.

OBJECTIVES: The aim of this study was to test whether optical coherence tomographic (OCT) guidance would provide additional useful information beyond that obtained by angiography and lead to a shift in reperfusion strategy and improved clinical outcomes in patients with ST-segment elevation myocardial infarction (STEMI) with early infarct artery patency. BACKGROUND: Angiography is limited in assessing the underlying pathophysiological mechanisms of the culprit lesion. METHODS: EROSION III (Optical Coherence Tomography-Guided Reperfusion in ST-Segment Elevation Myocardial Infarction With Early Infarct Artery Patency) is an open-label, prospective, multicenter, randomized, controlled study approved by the ethics committees of participating centers. Patients with STEMI who had angiographic diameter stenosis ≤ 70% and TIMI (Thrombolysis In Myocardial Infarction) flow grade 3 at presentation or after antegrade blood flow restoration were recruited and randomized to either OCT guidance or angiographic guidance. The primary efficacy endpoint was the rate of stent implantation. RESULTS: Among 246 randomized patients, 226 (91.9%) constituted the per protocol set (112 with OCT guidance and 114 with angiographic guidance). The median diameter stenosis was 54.0% (IQR: 48.0%-61.0%) in the OCT guidance group and 53.5% (IQR: 43.8%-64.0%) in the angiographic guidance group (P = 0.57) before randomization. Stent implantation was performed in 49 of 112 patients (43.8%) in the OCT group and 67 of 114 patients (58.8%) in the angiographic group (P = 0.024), demonstrating a 15% reduction in stent implantation with OCT guidance. In patients treated with stent implantation, OCT guidance was associated with a favorable result with lower residual angiographic diameter stenosis (8.7% ± 3.7% vs 11.8% ± 4.6% in the angiographic guidance group; P < 0.001). Two patients (1 cardiac death, 1 stable angina) met the primary safety endpoint in the OCT guidance group, as did 3 patients (3 cardiac deaths) in the angiographic guidance group (1.8% vs 2.6%; P = 0.67). Reinfarction was not observed in either group. At 1 year, the rates of predefined cardiocerebrovascular events were comparable between the groups (11.6% after OCT guidance vs 9.6% after angiographic guidance; P = 0.66). CONCLUSIONS: In patients with STEMI with early infarct artery patency, OCT guidance compared with angiographic guidance of reperfusion was associated with less stent implantation during primary percutaneous coronary intervention. These favorable results indicate the value of OCT imaging in optimizing the reperfusion strategy of patients with STEMI. (EROSION III: OCT- vs Angio-Based Reperfusion Strategy for STEMI; NCT03571269).

Phthalates in Chinese vehicular environments: Source emissions, concentrations, and human exposure.

Phthalates are typical air pollutants in vehicular environment since numerous synthetic materials that might contain phthalates are widely used to fabricate vehicle interiors (e.g., seat cushions, floor mats and dashboards). Hitherto, the importance of phthalate pollution in vehicular environment is not well-recognized because people spend only a small portion (around 8%) of their time in vehicles. In this study, the mass fractions of six phthalates in nine materials commonly used in Chinese vehicles (floor mats and seat cushions) were measured. Two phthalates, di-n-butyl phthalate (DnBP) and di-2-ethylhexyl phthalate (DEHP), were identified in most materials (the other phthalates were not detected). The emission characteristics of DnBP and DEHP from these materials were further investigated. The measured emission parameters were used as input for a mass-transfer model to estimate DnBP and DEHP concentrations in cabin air. Finally, the ratios between human exposures (via inhalation and dermal absorption from the gas phase) in vehicular environment and the total exposures in typical indoor environments (e.g., residences and offices) were estimated to be up to 110% and 20% for DnBP and DEHP, respectively. Based on these results, the vehicular environment might be a considerable site for human exposure to airborne phthalates.

Numerical and Experimental Investigation of Soot Suppression by Acoustic Oscillated Combustion.

The soot suppression by acoustic oscillations for acetylene diffusion flames was investigated combining numerical and experimental studies. The combustion and soot formation were predicted by the finite-rate detailed chemistry model and modified Moss-Brookes model, respectively, while the turbulence was predicted by the detached eddy simulation (DES) with a low Reynolds number correction. Experimental results showed that the soot rate almost decreased linearly with the amplitude of acoustic oscillation, and the pinch-off of the flame occurred at a large acoustic oscillation. Numerical results showed that the flame structure was well predicted, while the soot rate was over-predicted at large acoustic oscillations; the consumption of O2 increased obviously with the acoustic oscillation. The soot suppression was mainly caused by the decrease of the surface growth rate when the air was pushed toward the flame.

Exercise enhances cardiac function by improving mitochondrial dysfunction and maintaining energy homoeostasis in the development of diabetic cardiomyopathy.

Diabetic cardiomyopathy (DCM) is a major cause of morbidity and mortality in diabetic patients. Reactive oxygen species (ROS) produced by oxidative stress play an important role in the development of DCM. DCM involves abnormal energy metabolism, thereby reducing energy production. Exercise has been reported to be effective in protecting the heart against ROS accumulation during the development of DCM. We hypothesize that the AMPK/PGC-1α axis may play a crucial role in exercise-induced bioenergetic metabolism and aerobic respiration on oxidative stress parameters in the development of diabetic cardiomyopathy. Using a streptozotocin/high-fat diet mouse to generate a diabetic model, our aim was to evaluate the effects of exercise on the cardiac function, mitochondrial oxidative capacity, mitochondrial function, and cardiac expression of PGC-1α. Mice fed a high-fat diet were given MO-siPGC-1α or treated with AMPK inhibitor. Mitochondrial structure and effects of switching between the Warburg effect and aerobic respiration were analysed. Exercise improved blood pressure and systolic dysfunction in diabetic mouse hearts. The beneficial effects of exercise were also observed in a mitochondrial function study, as reflected by an enhanced oxidative phosphorylation level, increased membrane potential, and decreased ROS level and oxygen consumption. On the other hand, depletion of PGC-1α attenuated the effects of exercise on the enhancement of mitochondrial function. In addition, PGC-1α may be responsible for reversing the Warburg effect to aerobic respiration, thus enhancing mitochondrial metabolism and energy homoeostasis. In this study, we demonstrate the protective effects of exercise on shifting energy metabolism from fatty acid oxidation to glucose oxidation in an established diabetic stage. These data suggest that exercise is effective at ameliorating diabetic cardiomyopathy by improving mitochondrial function and reducing metabolic disturbances.

Decreased expression of adenosine receptor 2B confers cardiac protection against ischemia via restoring autophagic flux.

Adora2B (adenosine receptor 2B) has been reported as one of the key modulators during cardiac remodeling after acute myocardial infarction (AMI). However, the molecular mechanism involved has not been well investigated. Thus, our study aims to investigate whether Adora2B contributes to cardiac remodeling after AMI and its underlying mechanisms. Adenovirus harboring Adora2B or shAdora2B was injected in the border zone in a mouse model of AMI experimentally produced by permanent ligation of left anterior descending (LAD) coronary artery. Decreased Adora2B expression protected the cardiomyocytes from MI-induced autophagic flux obstacle, improved cardiac function, and reduced fibrosis after MI. Adora2B downregulation attenuated the accumulation of LC3-II and p62, which are autophagy substrate proteins. An adenovirus containing mRFP-GFP-LC3 showed that decreased expression of Adora2B restored the autophagic flux by enhancing autophagosome conversion to autophagolysosome. Also, Adora2B knockdown improved cardiomyocytes' survival and protected mitochondrial function of cardiomyocytes insulted with hypoxia. Notably, the effect of Adora2B on autophagy flux and cardiomyocyte protection could be mitigated by autophagy inhibitor chloroquine. Our results demonstrate that decreased expression of Adora2B protected cardiomyocytes from impaired autophagy flux induced by MI. Modulation Adora2B expression plays a significant role in blunting the worsening of heart function and reducing scar formation, suggesting therapeutic potential by targeting Adora2B in AMI for the infarct healing.

Adipose tissue-derived autotaxin causes cardiomyopathy in obese mice.

The prevalence of obesity is dramatic increased and strongly associated with cardiovascular disease. Adipokines, secreted from adipose tissues, are critical risk factors for the development of cardiomyopathy. Present study aimed to investigate the pathophysiological role of autotaxin in obesity-related cardiomyopathy. In high-fat diet-fed mice, autotaxin was mainly synthesized and secreted from adipocytes. The increased accumulation of cardiac autotaxin was positively associated with cardiac dysfunction in obese mice. Interestingly, specific blockage of adipose tissue autotaxin effectively protected against high-fat diet-induced cardiac structural disorders, left ventricular hypertrophy and dysfunction. Inhibition of autotaxin further improved high-fat diet-induced cardiac fibrosis and mitochondrial dysfunction, including improvement of mitochondrial structure, mass and activities. Our findings demonstrated intervention of adipose tissue biology could influence cardiac modification in obese mice, and adipocyte-derived autotaxin was a potential diagnostic marker and therapeutic target for obesity-related cardiomyopathy.

Enhanced permeation of a hydrophobic fluid through particles with hydrophobic and hydrophilic patterned surfaces.

The wetting properties of solid surfaces are significant in oil/gas and liquid displacement processes. It is difficult for hydrophobic fluids to permeate channels filled with hydrophilic particles and an aqueous phase, and this is thought to be the primary cause of low yields in low permeability reservoir operations. Using three-dimensional lattice Boltzmann simulations, we show that particles with hydrophobic and hydrophilic patterned surfaces can greatly improve hydrophobic fluid permeation. Specifically, a hydrophobic fluid can easily access micro-channels in the hydrophobic regions, which extend rapidly even to the hydrophilic regions and accelerate hydrophobic fluid escape. This work enriches understanding of multiphase flow in porous media at the pore scale and fracture conductivity and is expected to have great significance in the exploitation of low permeability reservoirs and shale gas.

Controllable transport of water through nanochannel by rachet-like mechanism.

By using molecular dynamics simulation, we have investigated systematically the feasibility of continuous unidirectional water flux across a deformed single-walled carbon nanotube (SWNT) driven by an oscillating charge outside without osmotic pressure or hydrostatic drop. Simulation results indicate that the flux is dependent sensitively on the oscillating frequency of the charge, the distance of the charge from the SWNT, and the asymmetry of the water-SWNT system. A resonance-like phenomenon is found that the water flux is enhanced significantly when the period of the oscillation is close to twice the average hopping time of water molecules inside the SWNT. These findings are helpful in developing a novel design of efficient functional nanofluidic devices.

Optimizing the design of nanostructures for improved thermal conduction within confined spaces.

Maintaining constant temperature is of particular importance to the normal operation of electronic devices. Aiming at the question, this paper proposes an optimum design of nanostructures made of high thermal conductive nanomaterials to provide outstanding heat dissipation from the confined interior (possibly nanosized) to the micro-spaces of electronic devices. The design incorporates a carbon nanocone for conducting heat from the interior to the exterior of a miniature electronic device, with the optimum diameter, D0, of the nanocone satisfying the relationship: D02(x) ∝ x1/2 where x is the position along the length direction of the carbon nanocone. Branched structure made of single-walled carbon nanotubes (CNTs) are shown to be particularly suitable for the purpose. It was found that the total thermal resistance of a branched structure reaches a minimum when the diameter ratio, ß* satisfies the relationship: ß* = γ-0.25bN-1/k*, where γ is ratio of length, b = 0.3 to approximately 0.4 on the single-walled CNTs, b = 0.6 to approximately 0.8 on the multiwalled CNTs, k* = 2 and N is the bifurcation number (N = 2, 3, 4 ...). The findings of this research provide a blueprint in designing miniaturized electronic devices with outstanding heat dissipation.PACS numbers: 44.10.+i, 44.05.+e, 66.70.-f, 61.48.De.

Lattice-Boltzmann simulation of two-dimensional flow over two vibrating side-by-side circular cylinders.

A numerical simulation using the multiple relaxation time lattice-Boltzmann method is carried out for the purpose of investigating fluid flow over two vibrating side-by-side circular cylinders and the effect of moving the cylinders on the wake characteristics. As a benchmark problem to assess the validity and efficiency of the model, the calculation was carried out at Reynolds number of 200 and four pitch ratios (T/D , where D is the cylinder diameter while T is the center-to-center spacing between the two cylinders) of 1.2, 1.6, 2.2, and 3.2, respectively. The calculated results indicate that the vibration of the cylinder pair has significant influence on the wake patterns. When the amplitude of vibration is big enough, the vibration locks up the vortex shedding and formation. For each cylinder vibration frequency, there exists a threshold of vibration amplitude for the lock-up phenomenon. With the vibration frequency is increased, the threshold of vibration amplitude decreases.

Numerical simulation of air flow through a biofilter with heterogeneous porous media.

Based on the ideal biofilter model, numerical simulation using lattice Boltzmann method is carried out to investigate the effect of Darcy number and porosity on removal efficiency of low headloss biofilter. The generalized Navier-Stokes model (Brinkman-Forchheimer-extended Darcy model) is applied making several assumptions. It is found that the Darcy number has determinant influence on the removal efficiency, and the effect of porosity on removal efficiency is very weak at lower Darcy numbers but very strong at higher Darcy numbers. It was found there was strong evidence of flow heterogeneity in the biofilter (Chitwood, D.E., Devinny, J.S., Reynolds Jr., F.E., 1999. Evaluation of a two-stage biofilter for treatment of POTW waste air. Environ. Prog. 18, 212-221). In this study we have found the biofilter performance can be improved by adjusting local Darcy number of the porous media in the biofilter.

The effect of water on the electrical conductivity of olivine.

It is well known that water (as a source of hydrogen) affects the physical and chemical properties of minerals--for example, plastic deformation and melting temperature--and accordingly plays an important role in the dynamics and geochemical evolution of the Earth. Estimating the water content of the Earth's mantle by direct sampling provides only a limited data set from shallow regions (<200 km depth). Geophysical observations such as electrical conductivity are considered to be sensitive to water content, but there has been no experimental study to determine the effect of water on the electrical conductivity of olivine, the most abundant mineral in the Earth's mantle. Here we report a laboratory study of the dependence of the electrical conductivity of olivine aggregates on water content at high temperature and pressure. The electrical conductivity of synthetic polycrystalline olivine was determined from a.c. impedance measurements at a pressure of 4 GPa for a temperature range of 873-1,273 K for water contents of 0.01-0.08 wt%. The results show that the electrical conductivity is strongly dependent on water content but depends only modestly on temperature. The water content dependence of conductivity is best explained by a model in which electrical conduction is due to the motion of free protons. A comparison of the laboratory data with geophysical observations suggests that the typical oceanic asthenosphere contains approximately 10(-2) wt% water, whereas the water content in the continental upper mantle is less than approximately 10(-3) wt%.

Water content in the transition zone from electrical conductivity of wadsleyite and ringwoodite.

The distribution of water in the Earth's interior reflects the way in which the Earth has evolved, and has an important influence on its material properties. Minerals in the transition zone of the Earth's mantle (from approximately 410 to approximately 660 km depth) have large water solubility, and hence it is thought that the transition zone might act as a water reservoir. When the water content of the transition zone exceeds a critical value, upwelling flow might result in partial melting at approximately 410 km, which would affect the distribution of certain elements in the Earth. However, the amount of water in the transition zone has remained unknown. Here we determined the effects of water and temperature on the electrical conductivity of the minerals wadsleyite and ringwoodite to infer the water content of the transition zone. We find that the electrical conductivity of these minerals depends strongly on water content but only weakly on temperature. By comparing these results with geophysically inferred conductivity, we infer that the water content in the mantle transition zone varies regionally, but that its value in the Pacific is estimated to be approximately 0.1-0.2 wt%. These values significantly exceed the estimated critical water content in the upper mantle, suggesting that partial melting may indeed occur at approximately 410 km depth, at least in this region.