RESUMEN
A key challenge in aging research is extending lifespan in tandem with slowing down functional decline so that life with good health (healthspan) can be extended. Here, we show that monthly clearance, starting from 20 months, of a small number of cells that highly express p21Cip1 (p21high) improves cardiac and metabolic function and extends both median and maximum lifespans in mice. Importantly, by assessing the health and physical function of these mice monthly until death, we show that clearance of p21high cells improves physical function at all remaining stages of life, suggesting healthspan extension. Mechanistically, p21high cells encompass several cell types with a relatively conserved proinflammatory signature. Clearance of p21high cells reduces inflammation and alleviates age-related transcriptomic signatures of various tissues. These findings demonstrate the feasibility of healthspan extension in mice and indicate p21high cells as a therapeutic target for healthy aging.
Asunto(s)
Inhibidor p21 de las Quinasas Dependientes de la Ciclina , Longevidad , Ratones Endogámicos C57BL , Animales , Inhibidor p21 de las Quinasas Dependientes de la Ciclina/metabolismo , Inhibidor p21 de las Quinasas Dependientes de la Ciclina/genética , Ratones , Masculino , Envejecimiento/metabolismo , FemeninoRESUMEN
BACKGROUND: Osteogenesis imperfecta (OI) is a genetic disorder of connective tissue caused by mutations associated with type I collagen, which results in defective extracellular matrix in temporomandibular joint (TMJ) cartilage and subchondral bone. TMJ is a fibrocartilaginous joint expressing type I collagen both in the cartilage and the subchondral bone. In the present study the effects of alendronate and altered loading of the TMJ was analyzed both in male and female OI mice. MATERIALS AND METHODS: Forty-eight, 10-weeks-old male and female OI mice were divided into 3 groups: (1) Control group: unloaded group, (2) Saline + Loaded: Saline was injected for 2 weeks and then TMJ of mice was loaded for 5 days, (3) alendronate + loaded: alendronate was injected for 2 weeks and then TMJ of mice was loaded for 5 days. Mice in all the groups were euthanized 24-h after the final loading. RESULTS: Alendronate pretreatment led to significant increase in bone volume and tissue density. Histomorphometrically, alendronate treatment led to increase in mineralization, cartilage thickness and proteoglycan distribution. Increased mineralization paralleled decreased osteoclastic activity. Our immunohistochemistry revealed decreased expression of matrix metallopeptidase 13 and ADAM metallopeptidase with thrombospondin type 1 motif 5. CONCLUSION: The findings of this research support that alendronate prevented the detrimental effects of loading on the extracellular matrix of the TMJ cartilage and subchondral bone.
Asunto(s)
Alendronato , Conservadores de la Densidad Ósea , Osteogénesis Imperfecta , Articulación Temporomandibular , Animales , Alendronato/farmacología , Alendronato/uso terapéutico , Osteogénesis Imperfecta/tratamiento farmacológico , Osteogénesis Imperfecta/patología , Ratones , Masculino , Femenino , Conservadores de la Densidad Ósea/uso terapéutico , Conservadores de la Densidad Ósea/farmacología , Articulación Temporomandibular/patología , Articulación Temporomandibular/efectos de los fármacos , Metaloproteinasa 13 de la Matriz/metabolismo , Proteína ADAMTS5 , Modelos Animales de Enfermedad , Densidad Ósea/efectos de los fármacos , ProteoglicanosRESUMEN
INTRODUCTION: The objective of this study was to evaluate the short-term and long-term hard-tissue changes with miniscrew-assisted rapid palatal expansion (MARPE) and rapid palatal expansion (RPE) compared with a matched control group with voxel-based superimposition using 3-dimensional cone-beam computed tomography (CBCT) scans. METHODS: A total of 180 CBCT scans were analyzed for 60 patients with a mean age of 13.9 years at 3 time points: pretreatment (T1), postexpansion (T2), and posttreatment (T3). Patients were divided into 3 groups: MARPE, RPE, and controls. Voxel-based superimposition was performed for CBCTs from T1 to T2 and T1 to T3 using the anterior cranial base as a reference. The hard-tissue surfaces were extracted after the superimposition procedure. Nine landmarks were analyzed: nasion, A-point, pogonion, left and right alar bases, zygoma, and gonion. Within-group changes were analyzed using linear mixed-effects models, including a random intercept per subject and the mixed effect of time (T1, T2, or T3) with test P values adjusted for multiple testing using Tukey's method. Between-group changes were analyzed using linear mixed-effects models, including a random intercept per subject and the mixed effects of time, group, and group × time interaction with P values adjusted for multiple testing using the Benjamin-Hochberg false discovery rate method. RESULTS: In the short term, both MARPE and RPE led to a significant downward movement of the right gonion and lateral movement of the right alar base compared with controls at T2 (P <0.05). In addition, MARPE led to a significant downward movement of pogonion and left gonion. RPE led to a significant downward movement of the A-point and lateral movement of the left alar base compared with controls at T2 (P <0.05). However, in the long-term, no changes were observed between the groups at T3. CONCLUSIONS: There were significant differences in pogonion, alar base, and gonion between MARPE, RPE, and control groups in the short term. However, all the hard-tissue changes were transient, as there were no differences between the 3 groups in the long term.
RESUMEN
OBJECTIVES: The objective of this study was to evaluate if there are any morphologic, positional, and volumetric differences in the temporomandibular joint (TMJ) of patients with unilateral posterior crossbite (UPC) compared to controls. Another objective was to analyse the discrepancy in the TMJ between the crossbite versus non-crossbite side in UPC versus right and left sides in controls. Additionally, this study aimed to evaluate the differences in the bone density at the masseteric insertion site at the angle of mandible in the UPC group and control group. MATERIAL AND METHODS: One hundred and thirty-two CBCTs were analysed with 66 patients in UPC group and 66 patients in control group (non-crossbite). Temporomandibular joint spaces - Anterior joint space (AJS), Superior joint space (SJS), Posterior joint space (PJS), Medial joint space (MJS), Middle joint space (MiJS), and Lateral joint space (LJS) were measured. Additionally, bone density at angle of mandible and volume of mandibular condyle were evaluated. The measurements were compared between the groups as well as between the crossbite and non-crossbite sides within the UPC group and between right and left sides within the control group. Furthermore, the associations between UPC and changes in TMJ regarding joint space availability, bone density, condylar head volume, and the effects of sex and age were evaluated using regression analysis. RESULTS: It was observed that UPC group showed a greater condylar volume, than the control group. Additionally, a larger mean discrepancy was observed between the crossbite side and non-crossbite side within the UPC group concerning condylar volume than controls. Concerning age, condylar volume was observed to be larger in adults than children. Adults showed significantly greater bone density and condylar volume than adolescents. Concerning sex, it was observed that males showed a larger SJS (right), MiJS, LJS, and bone density at the mandibular angle than females. CONCLUSION: There is a difference in the TMJ parameters particularly condylar volume in patients with UPC compared to controls.
Asunto(s)
Densidad Ósea , Tomografía Computarizada de Haz Cónico , Maloclusión , Mandíbula , Cóndilo Mandibular , Articulación Temporomandibular , Humanos , Articulación Temporomandibular/diagnóstico por imagen , Articulación Temporomandibular/patología , Masculino , Femenino , Maloclusión/diagnóstico por imagen , Tomografía Computarizada de Haz Cónico/métodos , Estudios Retrospectivos , Cóndilo Mandibular/diagnóstico por imagen , Cóndilo Mandibular/patología , Adolescente , Mandíbula/diagnóstico por imagen , Adulto Joven , Estudios de Casos y Controles , Adulto , NiñoRESUMEN
Obstructive sleep apnea (OSA) can affect children and adults, and, if left untreated, could have a major impact on the general and overall well-being of the patient. Dental health care providers and orthodontists have an interdisciplinary role in screening patients at risk for OSA and make a referral to establish a definitive diagnosis by a sleep physician. The gold standard of diagnostic testing is polysomnography. The adeno-tonsillar hypertrophy is the primary cause of sleep apnea in children; therefore, adeno-tonsillectomy must be the first line of treatment. Post adeno-tonsillectomy, if there is residual OSA due to underlying skeletal discrepancy, the patient may be referred to an orthodontist for appropriate management. Currently the evidence in the literature for prophylactic growth modification in children to prevent OSA is weak. In adults, the gold standard for managing OSA is Positive Airway Pressure (PAP) therapy; however, adherence to this treatment is rather low. The oral appliance (OA) therapy is an alternate for PAP intolerant patients and for mild to moderate OSA patients. The OA therapy has to be administered by a qualified dentist or orthodontist after careful examination of dental and periodontal health as well as any pre-existing joint conditions. The OA therapy could cause OA-associated malocclusion and patients have to be made aware of prior to initiating treatment. In patients with severe OSA, surgical maxilla-mandibular advancement (MMA) is highly effective.
Asunto(s)
Ortodoncistas , Grupo de Atención al Paciente , Polisomnografía , Apnea Obstructiva del Sueño , Humanos , Apnea Obstructiva del Sueño/diagnóstico , Apnea Obstructiva del Sueño/terapia , Niño , Adulto , Tonsilectomía , Adenoidectomía , Tamizaje Masivo/métodos , Rol Profesional , Aparatos OrtodóncicosRESUMEN
Binuclear vanadyl(IV) porphyrin (V2BP), where two vanadium(IV) porphyrin macrocycles are linked through benzimidazole units at the ß-positions, has been prepared and characterized with various techniques, such as UV-vis, Fourier transform-infrared, electron paramagnetic resonance, cyclic voltammetry, density functional transform calculations, and mass spectrometry. V2BP exhibits a red shift (Δλmax = 10 nm) in the Soret band as compared with unsubstituted parent vanadyl(IV) meso-tetraphenylporphyrin (VP). The synthesized binuclear vanadyl(IV) porphyrin (V2BP) has further been studied as a catalyst to explore a single-pot multicomponent Biginelli reaction producing biologically active 3,4-dihydropyrimidin-2-(1H)-one (DHPM)-based biomolecules and the corresponding thiones under solvent-free conditions and its catalytic activity has been compared with vanadyl(IV) meso-tetraphenylporphyrin (VP). Several reaction conditions, such as the amount of catalyst, time, solvent, and temperature, have been optimized to obtain the maximum yield of DHPMs or thiones. The synthesized ß-functionalized V2BP porphyrin dimer manifests much higher conversion (84-95% yield) of DHPMs or the corresponding thiones under the optimized reaction conditions with high TON (4454-5037) and TOF (1113-1259 h-1) values for the one-pot multicomponent Biginelli reaction as compared to the literature. The catalyst exhibited excellent recyclability up to 10 cycles.
RESUMEN
Background: Stature or body height is one of the most important and useful anthropometric parameters which determines the physical identity of an individual. Cranium encompasses hard tissue components with approximately immortal behavior, reason being cranial measurements were selected for the present study for estimation of stature. Objective: This investigation aimed to assess the stature of unknown using cephalometric parameters by creating equations through regression analysis. Materials and Methods: We selected 361 dental students for the present research; among them, 210 were females and 151 were males in the age range of 21-32 years. Stature and cephalic parameters, i.e., fronto-occipital circumference, head length, and head breadth were measured for each contributor following standard methods and techniques. Cephalic Index was calculated by using the formula: Cephalic Index (CI) = (Head width/Head length) ×100. Karl Pearson's correlation coefficient of stature with cephalic parameters was calculated, and regression analysis was done to generate the formulae for stature estimation. Results: Results indicated that all cephalic measurements have strong correlation with stature, and among them, circumference of head was found to be the most reliable predictor. Conclusion: Stature of unknown or deceased can be identified using cephalic parameters as an auxiliary practice.
RESUMEN
Posterior Crossbite is a common condition resulting because of transverse maxillary deficiency. The growth of the craniofacial complex finishes first in the transverse dimension, followed by sagittal and vertical dimensions. Conventional rapid palatal expansion (RPE) appliances are commonly used to correct transverse maxillary deficiency. Although RPE is efficient in correcting posterior crossbite, it results in dental side effects such as buccal tipping of maxillary molars, root resorption, bone dehiscence, and relapse. Mini-implant-assisted RPE has been introduced to increase the skeletal effects of expansion especially in patients with increased maturation and greater interdigitation of midpalatal suture. This article will review the biomechanics of RPE and mini-implant-assisted RPE. Additionally, the different designs of MARPE and the long-term clinical effects of expansion appliances will also be discussed in detail.
Asunto(s)
Tornillos Óseos , Métodos de Anclaje en Ortodoncia , Técnica de Expansión Palatina , Técnica de Expansión Palatina/instrumentación , Humanos , Fenómenos Biomecánicos , Métodos de Anclaje en Ortodoncia/instrumentación , Métodos de Anclaje en Ortodoncia/métodos , Diseño de Aparato Ortodóncico , Maloclusión/terapia , MaxilarRESUMEN
Cone beam computed tomography (CBCT) technology is increasingly utilized in the head and neck region and is valuable in treatment planning for cleft palate patients, potentially enabling the creation of 3D-printed obturators to assist with feeding and speech. This technical report investigates the feasibility of using data from a 360-degree CBCT scan to accurately produce a cleft palate obturator and assesses whether a lower-dose 180-degree CBCT scan can achieve a comparable result. A simulated cleft palate was crafted on a dehydrated human skull, which was then scanned using both 360-degree and 180-degree CBCT scanning protocols. Two obturators were digitally designed based on the segmented images from each scan and subsequently 3D printed. Evaluation of the segmented images and 3D-printed obturators from both protocols demonstrated clear visualization of anatomical landmarks and identical scores across all parameters, suggesting that the 180-degree CBCT scan can produce an obturator of comparable quality to that of the 360-degree scan, with the added benefit of reduced radiation exposure.
RESUMEN
INTRODUCTION: This study aimed to compare the efficiency of temporary anchorage devices (TADs) and fixed functional appliances (FFAs) for mandibular molar protraction. METHODS: Orthodontic records of 1050 consecutively treated patients with molar protraction were screened. Thirty-six records (22 females and 14 males; mean age, 17.4 years) were divided into two groups: TAD (21 subjects with 25 edentulous spaces) and FFA (15 subjects with 24 edentulous spaces). The primary outcome measure was the efficiency of protraction [magnitude and time required for protraction (rate) and anchor loss (AL)]. The secondary outcomes involved measuring the type of tooth movement (TOTM), external apical root resorption (EARR), alveolar bone height change (ABHC), alveolar bone width change (ABWC) and appliance failure. RESULTS: The rate of tooth movement was significantly higher for FFAs (0.83 ± 0.35 mm/month) versus TADs (0.49 ± 0.2 mm/month) (P = .005). Total treatment duration was less for FFAs (34.78 ± 8.1 months) versus TADs (47.72 ± 13.94 months) (P = .002). TOTM was similar for both (P = .909). EARR was 1.42 ± 1.38 mm for TAD and 1.25 ± 0.88 mm for FFA (P = .81). ABHC increased in the FFA group (1.01 ± 3.62 mm) and decreased for the TAD group (0.68 ± 1.66 mm). ABWC increased for both TAD (1.81 ± 1.73 mm) and FFA (1.75 ± 1.35 mm). The failure rate was 50% for FFAs and 33% for TADs. CONCLUSIONS: Both systems provided translation of lower molars with comparable anchorage control. However, FFAs were more efficient than TADs for lower molar protraction.
RESUMEN
The objective of this paper was to assess the outcome of bone graft material at alveolar bone augmentation sites combined with dental implants in postmenopausal women with compromised bone health by evaluating cone beam computerized tomography (CBCT) scans at multiple time points.CBCT scans were analyzed on 55 postmenopausal women with compromised bone health status to determine the fate of alveolar bone augmentation. CBCT scans were taken immediately after surgery and 9 and 24 months postoperatively. The patient's medication regimens and durations were recorded, and the pixel intensity value (PIV) was measured and standardized using scoring criteria and visual assessment. Statistical analyses included 2-sample t tests for continuous variables and Fisher's exact tests for categorical variables.Among the normal patients, 73% received a grade 2 visual score, and 27% received a grade 1 visual score. After 24 months, 45% of patients received a grade 2 score, and 27% received a grade 3 score. In the osteoporotic group receiving medication, 77% of participants received a grade 1 visual score at the 9-month postoperative evaluation, while 23% received a grade 2 score. At the 24-month assessment, 55% of patients received a grade 1 score, 41% received a grade 2 score, and only 5% received a grade 3 score. Notably, although the graft material did not remodel into native bone, it was a scaffold for implants in controlled osteoporotic patients. The study's results show that the pixel intensity values of particulate graft materials are similar across the three different time points, suggesting that the graft material's pixel intensity value remains constant in postmenopausal women with osteoporosis. The study's limitations include a small sample size and a restricted 24-month follow-up period. This limited time frame may need to capture long-term changes or variations in graft materials adequately. Future research should include a larger sample size and have a longer follow-up duration to provide a more comprehensive understanding of the change in graft materials between patients with normal and compromised bone health.
Asunto(s)
Aumento de la Cresta Alveolar , Tomografía Computarizada de Haz Cónico , Implantes Dentales , Humanos , Femenino , Persona de Mediana Edad , Aumento de la Cresta Alveolar/métodos , Anciano , Trasplante Óseo/métodos , Resultado del Tratamiento , Sustitutos de Huesos/uso terapéutico , Osteoporosis Posmenopáusica , Implantación Dental Endoósea , Estudios de Seguimiento , PosmenopausiaRESUMEN
BACKGROUND: The standard screening protocol for radiographic examination in dentistry as per the American Dental Association recommendations is a panoramic radiograph (PAN) and four horizontal bitewings. PAN inherently suffers from several shortcomings like the superimposition of anatomic structures, especially of the cervical spine that obscures a significant portion of the anterior maxilla and mandible. This region has a significant amount of pathology that is not adequately imaged. Three-dimensional (3D) imaging provides circumferential information on the area of interest and adds value to the diagnosis and treatment planning of pathology, especially in the anterior maxilla and mandible. However, there is not an adequate number of well-designed studies that articulate the true value addition of 3D imaging for the evaluation of this region. OBJECTIVES: The objective of this study is to evaluate the value addition of 3D imaging in diagnosing pathologies in the anterior maxilla and mandible when compared to two-dimensional PAN. MATERIALS AND METHODS: A total of 25 cases that had a diagnosis of anterior pathology and had both a PAN and a cone beam computed tomography (CBCT) scan were collected for this study. An institutional review board approval to retrospectively evaluate these data was obtained. The PAN and CBCT scans were randomly evaluated by a second-year dental student, an oral and maxillofacial radiology resident in training, and a board-certified oral radiologist. The scans were evaluated using a three-point modified Likert scale, where 1 represents "not visible or clear," 2 represents "visible but not clear," and 3 represents "visible and clear." The lesions were evaluated for characteristics like lesion location, size & shape, internal contents, borders of the lesion, cortical integrity, locularity, and effect on adjacent structures like root resorption. After the evaluation was completed, a comparison of the lesion diagnosis was done with histopathology to confirm the diagnosis. The evaluators were also asked to comment on the specific feature that 3D imaging provided that added value to the case. Kappa analysis was done to evaluate inter-operator reliability. RESULTS: PAN demonstrated significantly lower efficacy in identifying and diagnosing lesions. Only 56% of cases were analyzed using PAN, with 44% deemed undetectable or poorly visualized. These challenging cases necessitated CBCT scans for accurate diagnosis, which successfully diagnosed all 25 cases. The p-value of 0.0002 for PAN implies a highly significant difference from histopathology, suggesting the distinctions are not due to chance. Conversely, the p-value of 0.3273 for CBCT implies that observed differences may be random, lacking sufficient evidence to reject the null hypothesis. CBCT scans consistently outperformed PAN in visualizing various lesion characteristics, underscoring their superior diagnostic capabilities. CONCLUSIONS: In this study, with a small sample size, 3D imaging provided a significant value addition to the diagnosis and treatment planning by providing additional information regarding the location, extent, internal content, and effect on adjacent structures. The practical implications for clinical settings, along with comparisons to current literature, underscore the study's distinctiveness.
RESUMEN
OBJECTIVES: To assess the accuracy of ChatGPT answers concerning orthodontic clear aligners. MATERIALS AND METHODS: A cross-sectional content analysis of ChatGPT generated responses to queries related to clear aligner treatment (CAT) was undertaken. A total of 111 questions were generated by three orthodontists based on a set of predefined domains and subdomains. The artificial intelligence (AI)-generated (ChatGPT) answers were extracted and their accuracy was determined independently by five orthodontists. The accuracy of answers was assessed using a prepiloted four-point scale scoring rubric. Descriptive statistics were performed. RESULTS: The total mean accuracy score for the entire set was 2.6 ± 1.1. It was noted that 58% of the AI-generated answers were scored as objectively true, 18% were selected facts, 9% were minimal facts, and 15% were false. False claims included the ability of CAT to reduce the need for orthognathic surgery (4.0 ± 0.0), improve airway function (3.8 ± 0.5), achieve root parallelism (3.6 ± 0.5), alleviate sleep apnea (3.8 ± 0.5), and produce more stable results compared to fixed appliances (3.8 ± 0.5). CONCLUSIONS: The overall level of accuracy of ChatGPT responses to questions concerning CAT was suboptimal and lacked citations to relevant literature. Ability of the software to offer current and precise information was limited. Therefore, clinicians and patients must be mindful of false claims and relevant facts omitted in the answers generated by ChatGPT.
Asunto(s)
Inteligencia Artificial , Aparatos Ortodóncicos Removibles , Humanos , Estudios Transversales , Programas Informáticos , Aparatos Ortodóncicos FijosRESUMEN
INTRODUCTION: This study aimed to evaluate the soft-tissue changes in the long-term after miniscrew-assisted rapid palatal expansion (MARPE) and conventional rapid palatal expansion (RPE) appliances compared with a matched control group using voxel-based superimposition of cone-beam computed tomography (CBCT) scans. METHODS: A total of 180 CBCTs for 60 patients at 3-time points were evaluated: pretreatment (T1), postexpansion (T2), and posttreatment (T3) for 3 groups: (1) MARPE, (2) RPE, and (3) controls (time-period T1 to T3: MARPE, 2 years 8 months; RPE, 2 years 9 months; control, 2 years 7 months). The voxel-based superimposition technique was used to superimpose the CBCT scans, after which the soft-tissue surfaces were extracted from the superimposed T1-CBCT, T2-CBCT, and T3-CBCT scans. Nine landmarks were identified on the CBCT scans: nasion, A-point, pogonion, right and left alar base, right and left zygoma, and right and left gonion. The coordinates of the 9 parameters were obtained in the x-axis, y-axis, and z-axis for the CBCT scans and subjected to statistical analyses. The changes in the soft-tissue surfaces were also evaluated by color-coded maps for short-term (T2) and long-term (T3) changes. The mean changes from T1 to T2 and T1 to T3 were tested against no change within the groups by paired t test, and the mean changes among the 3 groups were compared with analysis of variance F test with Tukey's Honest significant difference used for adjusting P values for multiple testing. RESULTS: In the short term, both MARPE and RPE led to a significant downward movement of pogonion, left gonion, and lateral movement of the right and left alar base compared with controls at T2 (P <0.05). In addition, MARPE led to a significant downward movement of right gonion than controls at T2 (P <0.05). Moreover, RPE led to a significant downward and forward movement of A-point and downward movement of the right and left alar base than controls at T2 (P <0.05). However, in the long-term, there were no significant differences in the soft-tissue changes among the MARPE, RPE, and control groups. CONCLUSIONS: MARPE and RPE do not lead to significant soft-tissue changes in the long term when compared with controls.
Asunto(s)
Técnica de Expansión Palatina , Cigoma , Humanos , Tomografía Computarizada de Haz Cónico/métodos , MaxilarRESUMEN
Introduction The primary objective of this study was to quantitatively analyze the skeletal and dentoalveolar parameters following the mandibular expansion with a banded appliance. It was also part of the study to evaluate the amount of dental expansion and assess the change in the intermolar and individual first molar angulation. The basal bone parameters were compared to assess the skeletal effect of removable mandibular expansion appliance therapy. Methods In this retrospective cone beam computed tomography (CBCT) study, a total of 80 subjects with mandibular expansion therapy were screened. After imposing inclusion/exclusion criteria, 70 patients (40 females and 30 males) with a mean age of 8.8±1.24 years and 4.79±3.59 months were included. The mean expansion period was 3.04±1.61 months. Skeletal parameters such as buccal cortical thickness, buccal bone width, and cortical density were measured at 2mm from the alveolar crest, mid-root, and apex region in the coronal slice at the level of the mesiobuccal root of the first molar. Expansion parameters such as intermolar width, intermolar angulation, and individual molar angulation were also measured in the same slice. Finally, basal bone parameters such as inter-mental foramina distance and anterior arch perimeter were recorded. Results No significant difference (p>0.05) was found for most skeletal parameters following the expansion, except for the mid-root buccal bone width (p<0.05). On average, 4.54±2.53 mm of dental expansion (p<0.05) was achieved at the first molar region. Individual molar angulation showed a statistically significant difference (right = 7.46±7.91°, left = 7.53±7.18°, p=<0.05). The basal bone parameters showed no significant difference (p>0.05). Conclusions The mandibular expansion device leads to an increase in intermolar distance. The amount of expansion achieved with such devices is due to the buccal tipping of the molars. Skeletal effects such as cortical thickness, buccal bone width, or changes in the basal bone dimensions should not be expected with mandibular expansion therapy.
RESUMEN
Objective The study was focused on evaluating the change in mandibular morphology following the Twin Block appliance therapy and recording its effect on the maxilla and maxillary dentoalveolar complex. Also, the results of the Twin Block appliance between males and females were compared. Material and methods In this two-armed retrospective cephalometric study, 30 patients (mean age 12 years) treated with Twin Block appliance for the period of 8-12 months were chosen, and their records were obtained to analyze. These results were compared with 15 control subjects of the same age group chosen from the American Association of Orthodontics Foundation (AAOF) growth legacy collection: Michigan Growth Study Class II subjects. Cephalometric tracing was done, and data was processed for descriptive statistical analysis. Results Paired sample t-test and ANOVA test were performed to evaluate the differences in the pre-treatment (T1) and post-functional (T2) values. â ANB showed a mean difference of -4.71°±1.55° for males and 6.22°±6.78° for females, which is significant. The mandibular length (Co-Gn), for male subjects, the mean difference was 5.14±1.74 mm, and for female subjects, it was 6±2mm, which is highly significant; 49.88% of skeletal changes and 50.12% of dentoalveolar changes were reported to bring about Class II correction with Twin Block. Conclusion A successful increase in mandibular length was achieved using a Twin Block as a functional appliance. Also, the significant maxillary restraining effect was recorded. More skeletal changes were observed in males than females.