Cu,Zn,I-Doped Carbon Dots with Boosted Triple Antioxidant Nanozyme Activity for Treatment of DSS-Induced Colitis.

Nanozyme-mediated antioxidative therapy is a promising star for treating a myriad of important diseases through eliminating excessive reactive oxygen species (ROS) such as O2·- and H2O2, a critical mechanism for inflammatory bowel disease (IBD). This work provides a high biocompatibility iodine-copper-zinc covalent doped carbon dots (Cu,Zn,I-CDs) with the catalase (CAT)-, superoxide dismutase (SOD)- and glutathione peroxidase (GPx)-like catalytic activities for treating ulcerative colitis (UC) by scavenging overproduced ROS. We found that I dopant aids in counteracting the positive charge at Cu,Zn dopants brought on by low pH, enabling Cu,Zn,I-CDs to process strong triple antioxidant nanozyme activities rather than Cu,Zn-CDs. Vitro experiments displayed that the Cu,Zn,I-CDs could scavenge the excessive ROS to protect cellular against oxidative stress and reduce the expression of proinflammatory cytokines, such as TNF-α, IL-1ß, and IL-6. In sodium dextran sulfate (DSS)-induced colitis mice models, Cu,Zn,I-CDs with excellent biocompatibility could effectively relieve the inflammation of the colon, containing the reduction of the colon length, the damaged epithelium, the infiltration of inflammatory cells, and upregulation of antioxidant genes. Therefore, the therapy of Cu,Zn,I-CD antioxidant nanozymes is an effective approach and provides a novel strategy for UC treatment.

Colorimetric-SERS dual-mode aptasensor for Staphylococcus aureus based on MnO2@AuNPs oxidase-like activity.

The nanozyme-linked aptamer-sorbent assay (NLASA) is a rapid way to screen and characterize aptamer binding to targets. In this paper, a MnO2@AuNPs@aptamer (Apt) based NLASA coupled with colorimetric-SERS dual-mode for Staphylococcus aureus (S. aureus) detection is presented. Cu,Fe-CDs were used as the reducing agent to synthesize MnO2 and gold nanoparticles (AuNPs). Then, they were fabricated to obtain MnO2@AuNPs with oxidase (OXD)-like and SERS activities. The S. aureus aptamer was conjugated to MnO2@AuNPs and enhanced the OXD-like activity, which realized the specific capture of S. aureus in food matrices. In addition, S. aureus improves the oxidation of 2,2'-azino-bis (3-ethylbenzthiazoline-6-sulfonic acid (ABTS) but inhibits 3,3',5,5'-tetramethylbenzidine (TMB) to generate Raman-active oxTMB with MnO2@AuNPs@Apt. This sensor was used for detections of S. aureus in a concentration ranged from 101 to 107 CFU/mL with a detection limit of 0.926 CFU/mL (colorimetric) and 1.561 CFU/mL (SERS), and the recovery is 85%-105% in real samples.

A Red-Emission Fluorescent Probe with Large Stokes Shift for Detection of Viscosity in Living Cells and Tumor-Bearing Mice.

Abnormal viscosity is closely related to the occurrence of many diseases, such as cancer. Therefore, real-time detection of changes in viscosity in living cells is of great importance. Fluorescent molecular rotors play a critical role in detecting changes in cellular viscosity. Developing red emission viscosity probes with large Stokes shifts and high sensitivity and specificity remains an urgent and important topic. Herein, a novel viscosity-sensitive fluorescent probe (TCF-VIS1) with a large stokes shift and red emission was prepared based on the 2-dicyanomethylene-3-cyano-4,5,5-trimethyl-2,5-dihydrofuran (TCF) skeleton. Due to intramolecular rotation, the probe itself does not fluorescence at low viscosity. With the increase in viscosity, the rotation of TCF-VIS1 is limited, and its fluorescence is obviously enhanced. The probe has the advantages of simple preparation, large Stokes shift, good sensitivity and selectivity, and low cytotoxicity, which make it successfully used for viscosity detection in living cells. Moreover, TCF-VIS1 showed its potential for cancer diagnosis at the cell level and in tumor-bearing mice by detecting viscosity. Therefore, the probe is expected to enrich strategies for the detection of viscosity in biological systems and offer a potential tool for cancer diagnosis.

Aptamer-functionalized Fe3O4/MWCNTs@Mo-CDs nanozyme for rapid colorimetric detection toward Escherichia coli.

The pathogenic bacteria induced foodborne disease has been detrimental to public health worldwide. Herein, the peroxidase (POD)-like Fe3O4/MWCNTs@Mo-CDs (FMMC) nanozyme was applied for the detection of Escherichia coli (E. coli). The E. coli aptamer was conjugated with the surface of the FMMC, which effectively enhanced the POD-like activity attributing to the higher affinity to the substrate, and then specific capture of E. coli in food matrices, leading to the reduction of POD-like activity. Therefore, a robust and facile colorimetric aptasensor was developed for detecting E. coli with a wide linear range of 101-106 CFU/mL, low LOQ of 101 CFU/mL and LOD of 0.978 CFU/mL. The aptasensor demonstrated the satisfied selectivity for E. coli compared to the other strains. This method possessed the potential application for fast in situ screening of foodborne pathogens in food products.

New Cocrystals of Ligustrazine: Enhancing Hygroscopicity and Stability.

Ligustrazine (TMP) is the main active ingredient extracted from Rhizoma Chuanxiong, which is used in the treatment of cardiovascular and cerebrovascular diseases, with the drawback of being unstable and readily sublimated. Cocrystal technology is an effective method to improve the stability of TMP. Three benzoic acid compounds including P-aminobenzoic acid (PABA), 3-Aminobenzoic acid (MABA), and 3,5-Dinitrobenzoic acid (DNBA) were chosen for co-crystallization with TMP. Three novel cocrystals were obtained, including TMP-PABA (1:2), TMP-MABA (1.5:1), and TMP-DNBA (0.5:1). Hygroscopicity was characterized by the dynamic vapor sorption (DVS) method. Three cocrystals significantly improved the hygroscopicity stability, and the mass change in TMP decreased from 25% to 1.64% (TMP-PABA), 0.12% (TMP-MABA), and 0.03% (TMP-DNBA) at 90% relative humidity. The melting points of the three cocrystals were all higher than TMP, among which the TMP-DNBA cocrystal had the highest melting point and showed the best stability in reducing hygroscopicity. Crystal structure analysis shows that the mesh-like structure formed by the O-H⋯N hydrogen bond in the TMP-DNBA cocrystal was the reason for improving the stability of TMP.

Study on preparation and properties of silver alloy for Mongolian medicine acupuncture.

The Mongolian medical silver needles often encounter issues of bending, fracturing, and blunting in clinical applications. Similarly, Mongolian warm needles can cause burns on patients due to inaccurate temperature control. In this study, we developed an Ag85Cu15 alloy specifically for acupuncture needles based on material preparation. By incorporating appropriate amounts of Mn and Ti elements, we were able to enhance the mechanical properties and biocompatibility of the acupuncture needles. Compared to commercially available silver needles, this alloy exhibited a significant increase in microhardness up to 210.2 Hv0.2 and an improved tensile strength of 880.2 MPa. Furthermore, we designed a thermoelectric effect-based temperature measurement model for precise control of the warm needle's temperature, enhancing the therapeutic effectiveness of the treatment.

A Novel Cocrystal of Daidzein with Piperazine to Optimize the Solubility, Permeability and Bioavailability of Daidzein.

It is well known that daidzein has various significant medicinal values and health benefits, such as anti-oxidant, anti-inflammatory, anti-cancer, anti-diabetic, cholesterol lowering, neuroprotective, cardioprotective and so on. To our disappointment, poor solubility, low permeability and inferior bioavailability seriously limit its clinical application and market development. To optimize the solubility, permeability and bioavailability of daidzein, the cocrystal of daidzein and piperazine was prepared through a scientific and reasonable design, which was thoroughly characterized by single-crystal X-ray diffraction, powder X-ray diffraction, Fourier transform infrared spectroscopy, differential scanning calorimetry and thermogravimetric analysis. Combining single-crystal X-ray diffraction analysis with theoretical calculation, detailed structural information on the cocrystal was clarified and validated. In addition, a series of evaluations on the pharmacogenetic properties of the cocrystal were investigated. The results indicated that the cocrystal of daidzein and piperazine possessed the favorable stability, increased solubility, improved permeability and optimized bioavailability of daidzein. Compared with the parent drug, the formation of cocrystal, respectively, resulted in 3.9-, 3.1-, 4.9- and 60.8-fold enhancement in the solubility in four different media, 4.8-fold elevation in the permeability and 3.2-fold in the bioavailability of daidzein. Targeting the pharmaceutical defects of daidzein, the surprising elevation in the solubility, permeability and bioavailability of daidzein was realized by a clever cocrystal strategy, which not only devoted assistance to the market development and clinical application of daidzein but also paved a new path to address the drug-forming defects of insoluble drugs.

Analysis of the thickness characteristics of the left atrial posterior wall and its correlation with the low and no voltage areas of the left atrial posterior wall in patients with atrial fibrillation.

OBJECTIVE: To analyze the relationship between the thickness of the left atrial posterior wall and the low and no voltage zones in the left atrial posterior wall in patients with atrial fibrillation (AF). METHODS: 61 patients admitted to our cardiology department for AF and radiofrequency ablation of AF from January 1, 2020 to May 30, 2022 were enrolled according to inclusion and exclusion criteria. The atrial wall thickness was measured by CT scan. Baseline data, preoperative cardiac ultrasound data, preoperative biochemical parameters, low voltage zone (fibrotic zone) and no voltage zone (scar zone) in the left atrial posterior wall area, and various parameters of posterior left atrial wall thickness were collected. RESULTS: The differences of the thickness between the upper, middle and lower mean levels of the left atrial posterior wall were statistically significant (P = 0.004). The results showed that body mass index was weakly positively correlated with the mean level of total left atrial posterior wall thickness (r = 0.426, P = 0.001) and was statistically significant. The remaining indices were positively or negatively correlated with the mean level of total left atrial posterior wall thickness, but none were statistically significant (P > 0.05). CONCLUSIONS: Both left atrial posterior wall low-voltage zone and voltage-free zone were positively correlated with the mean total left atrial posterior wall thickness, and left atrial posterior wall low-voltage zone and voltage-free zone were significantly positively correlated. Body mass index was weakly positively correlated with total left atrial posterior wall thickness.

Purely Organic Room-Temperature Phosphorescence Molecule for High-Performance Non-Doped Organic Light-Emitting Diodes.

Purely organic molecules with room-temperature phosphorescence (RTP) are potential luminescent materials with high exciton utilization for organic light-emitting diodes (OLEDs), but those exhibiting superb electroluminescence (EL) performances are rarely explored, mainly due to their long phosphorescence lifetimes. Herein, a robust purely organic RTP molecule, 3,6-bis(5-phenylindolo[3,2-a]carbazol-12(5H)-yl)-xanthen-9-one (3,2-PIC-XT), is developed. The neat film of 3,2-PIC-XT shows strong green RTP with a very short lifetime (2.9 µs) and a high photoluminescence quantum yield (72 %), and behaviors balanced bipolar charge transport. The RTP nature of 3,2-PIC-XT is validated by steady-state and transient absorption and emission spectroscopies, and the working mechanism is deciphered by theoretical simulation. Non-doped multilayer OLEDs using thin neat films of 3,2-PIC-XT furnish an outstanding external quantum efficiency (EQE) of 24.91 % with an extremely low roll-off (1.6 %) at 1000 cd m-2. High-performance non-doped top-emitting and tandem OLEDs are also achieved, providing remarkable EQEs of 24.53 % and 42.50 %, respectively. Delightfully, non-doped simplified OLEDs employing thick neat films of 3,2-PIC-XT are also realized, furnishing an excellent EQE of 17.79 % and greatly enhanced operational lifetime. The temperature-dependent and transient EL spectroscopies demonstrate the electrophosphorescence attribute of 3,2-PIC-XT. These non-doped OLEDs are the best devices based on purely organic RTP materials reported so far.

Zirconium-porphyrin-MOF-based oxidase-like nanozyme with oxygen vacancy for aflatoxin B1 colorimetric sensing.

In this study, a porous coordination network zirconium-porphyrin-based nanoparticle with oxygen vacancies (OVs) was prepared using acetic acid and benzoic acid as modulators via a simple hydrothermal method. The presence of OVs was confirmed by various characterization methods and was found to enhance oxygen uptake and activation. This resulted in the generation of more reactive peroxyl radicals (•O2 -) and led to an improved oxidase (OXD) mimetic activity. Additionally, it promoted 2,2'-azino-bis(3-ethylbenzthiazoline-6-sulfonic acid) (ABTS) oxidation, with a low Km value of 0.07 mM and a high Vmax of 1.47 × 10-7 M·s-1. As aflatoxin B1 (AFB1) inhibits the Pt@PCN-222-ABTS nanozyme system, a colorimetric probe for AFB1 detection was constructed. The limit of detection (LOD) was 0.074 µg·L-1. This research presents a novel approach for designing a nanozymatic-based colorimetric method to analyze trace AFB1 residues in food.

Colorimetric-SERS dual-mode sensing of Pb(II) ions in traditional Chinese medicine samples based on carbon dots-capped gold nanoparticles as nanozyme.

Peroxidase (POD)-mimicking nanozymes have got great progress in the sensing field, but most nanozyme assaying systems are built with a single-signal output mode, which is vulnerable to the effect of different factors. Thus, establishment of a dual-signal output mode is necessary for acquiring dependable and durable performance. This work described an Fe doped noradrenaline-based carbon dots and Prussian blue (Fe,NA-CDs/PB) nanocomposite as a POD-like nanozyme and modified gold nanoparticles (AuNPs) for the colorimetric and surface-enhanced Raman scattering (SERS) dual-mode sensor of Pb(II) in traditional Chinese medicine samples. With 2,2'-azino-bis-(3-ethylbenzothiazoline-6-sulphonic acid) (ABTS) and 3,3',5,5'-tetramethylbenzidine (TMB) as the substrates, it was found that the addition of Pb(II) inhibited the POD-like activity of Fe,NA-CDs/PB and AuNPs, so it was used for colorimetric and SERS dual-mode assays. The POD-like activity was shown to be a "ping-pong" catalytic mechanism, whereas the addition of Pb(II) produced noncompetitive inhibition with modulatory effects on Fe,NA-CDs/PB. The linear response range for colorimetric and SERS sensor detection of Pb(II) was 0.01-1.00 mg/L with the detection limit of 5 µg/L and 8 µg/L, respectively. This dual-mode detection system shows excellent selectivity. More importantly, the Pb(II) in traditional Chinese medicine samples have successfully assayed with good recovery from 90.4 to 108.9 %.

Metformin-Mediated Improvement in Solubility, Stability, and Permeability of Nonsteroidal Anti-Inflammatory Drugs.

Nonsteroidal anti-inflammatory drugs (NSAIDs) are class II biopharmaceutics classification system drugs. The poor aqueous solubility of NSAIDs can lead to limited bioavailability after oral administration. Metformin (MET), a small-molecule compound, can be used in crystal engineering to modulate the physicochemical properties of drugs and to improve the bioavailability of orally administered drugs, according to the literature research and preliminary studies. We synthesized two drug-drug molecular salts (ketoprofen-metformin and phenylbutazone-metformin) with NSAIDs and thoroughly characterized them using SCXRD, PXRD, DSC, and IR analysis to improve the poor solubility of NSAIDs. In vitro evaluation studies revealed that the thermal stability and solubility of NSAIDs-MET were substantially enhanced compared with those of NSAIDs alone. Unexpectedly, an additional increase in permeability was observed. Since the structure determines the properties, the structure was analyzed using theoretical calculations to reveal the intermolecular interactions and to explain the reason for the change in properties. The salt formation of NSAIDs with MET could substantially increase the bio-absorption rate of NSAIDs, according to the in vivo pharmacokinetic findings, which provides an experimental basis for developing new antipyretic and analgesic drugs with rapid onset of action.

Synergistic nucleation regulation using 4,4',4''-tris(carbazol-9-yl)-triphenylamine and moisture for stably air-processed high-performance perovskite photodetectors.

Perovskite photodetectors (PPDs) offer a promising solution with low cost and high responsivity, addressing the limitations of traditional inorganic photodetectors. However, there is still room for improvement in terms of the dark current and stability of air-processed PPDs. In this study, 4,4',4''-tris(carbazol-9-yl)-triphenylamine (TCTA) was utilized as a nucleation agent to enhance the quality of perovskite films. The synergistic effect of TCTA and moisture promotes rapid nucleation of PbI2-PbCl2, resulting in an increased nucleation rate and the elimination of pinholes in the film. By employing additive engineering, we obtained a PbI2-PbCl2 layer with high coverage, leading to a low density of traps in the corresponding perovskite film. Consequently, the modified PPD exhibits a remarkable reduction in dark current density by over one order of magnitude, reaching 2.4 × 10-10 A cm-2 at -10 mV, along with a large linear dynamic range (LDR) of 183 dB. Furthermore, the resulting PPD demonstrates remarkable stability, retaining 90% of the initial external quantum efficiency (EQE) value even after continuous operation for over 3200 hours. Owing to a fast response time in the nanosecond range, the PPD could convert modulated light signals into electrical signals at a speed of 588 Kbit s-1, highlighting the great potential in the field of optical communication.

A colorimetric detection of dopamine in urine and serum based on the CeO2 @ZIF-8/Cu-CDs laccase-like nanozyme activity.

This study reports a sensitive and selective colorimetric approach for the analysis of dopamine (DA) based on CeO2 @ZIF-8/Cu-CDs laccase-like nanozymes activity. The CeO2 @ZIF-8/Cu-CDs was synthesized using cerium oxide (CeO2 ) and copper-doped carbon dots (Cu-CDs) with 2-methylimidazole by a facilely hydrothermal approach. The CeO2 @ZIF-8/Cu-CDs exhibited excellent laccase-like nanozymes activity and can oxidize the colorless substrate (DA) to red product with 4-aminoantipyrine as the chromogenic agent. The Michaelis-Menten constant (Km ) and the maximal velocity (Vmax ) of CeO2 @ZIF-8/Cu-CDs are 0.20 mM and 1.48 µM/min, respectively. The detection method has a linear range of 0.05-7.5 µg/mL and a detection limit as low as 8.5 ng/mL with good reproducibility. The developed colorimetric sensor was applied to rapid and precise quantitative evaluation of DA levels in serum and urine samples. This study presents a new approach for detecting biological molecules by utilizing the controlled regulation of nanozymes' laccase-like activity.

Core-shell structure DA-CDs/AuNPs for the recognition of fenamidone by surface-enhanced Raman scattering.

In this work, a facile synthesis method for dopamine carbon dots-based Au nanoparticles (DA-CDs/AuNPs) by seed gold method was reported as the surface enhanced Raman scattering (SERS) booster. DA-CDs with rich in surface functional groups was synthesized using dopamine, citric acid and ethylenediamine as precursors by a facile hydrothermal method, and can be used as the capping agents and reducing agents for the synthesis of DA-CDs/AuNPs. Due to the electromagnetic "hot spots" effect, DA-CDs/AuNPs with core-shell structure exhibited strong SERS activity. Based on the specific interaction of DA-CDs/AuNPs and fenamidone, a detection method of fenamidone was established with a low detection limit of 0.05 µg/mL. Finally, the SERS sensor was successfully applied to the detection of fenamidone in fruit with recoveries between 90.6 % and 98.7 %. The method here proposed can be reliably applied for fenamidone detection on fruits.

Improvement of the Thermal Stability and Aqueous Solubility of Three Matrine Salts Assembled by the Similar Structure Salt Formers.

Matrine (MAT), a natural Chinese herbal medicine, has a unique advantage in the treatment of various chronic diseases. However, its low melting point, low bioavailability, and high dosage restrict its subsequent development into new drugs. In this study, three kinds of MAT salts, namely, MAT-2,5-dihydroxybenzoic acid (MAT-25DHB), MAT-2,6-dihydroxybenzoic acid (MAT-26DHB), and MAT-salicylic acid-hydrate (MAT-SAL-H2O), were designed and synthesized to improve the drugability of MAT. The three salts were characterized by using various analytical techniques, including single-crystal X-ray diffractometry, powder X-ray diffractometry, differential scanning calorimetry, thermogravimetry, and infrared spectroscopy. The results of the thermal stability evaluation showed that the formation of salts improved the stability of MAT; MAT-25DHB is the most stable salt reported at present. The results of aqueous solubility showed that the solubility of MAT-25DHB was higher than that of MAT, while that of MAT-26DHB and MAT-SAL-H2O were less. Given that the MAT-25DHB salt further improved the solubility of MAT, it is expected to be subjected to further research as an optimized salt. Lattice energy and solvation free energy are important factors affecting the solubility of salts; the reasons for the changes of solubility and stability of three kinds of salts are explained by calculating them.

High-Stroke, High-Output-Force, Fabric-Lattice Artificial Muscles for Soft Robots.

Artificial muscles, providing safe and close interaction between humans and machines, are essential in soft robotics. However, their insufficient deformation, output force, or configurability usually limits their applications. Herein, this work presents a class of lightweight fabric-lattice artificial muscles (FAMs) that are pneumatically actuated with large contraction ratios (up to 87.5%) and considerable output forces (up to a load of 20 kg, force-to-weight ratio of over 250). The developed FAMs consist of a group of active air chambers that are zigzag connected into a lattice through passive connecting layers. The geometry of these fabric components is programmable to convert the in-plane lattice of FAMs into out-of-plane configurations (e.g., arched and cylindrical) capable of linear/radial contraction. This work further demonstrates that FAMs can be configured for various soft robotic applications, including the powerful robotic elbow with large motion range and high load capability, the well-fitting assistive shoulder exosuit that can reduce muscle activity during abduction, and the adaptive soft gripper that can grasp irregular objects. These results show the unique features and broad potential of FAMs for high-performance soft robots.

Enhancing diabetic wound healing with a pH-responsive nanozyme hydrogel featuring multi-enzyme-like activities and oxygen self-supply.

Diabetic wound treating remains a challenging due to bacterial infections, oxidative stress, tissue hypoxia, and high glucose levels. Herein, a multi-enzyme-like activities nanocomposite (Mo,Fe/Cu,I-Ag@GOx) was designed and anchored to a multifunctional fluorescence hydrogel. The nanozyme gel, loaded with glucose-oxidase (GOx), exhibits intrinsic GOx, peroxidase (POD)-, oxidase (OXD)-, catalase (CAT)- and superoxide dismutase (SOD)-like activities with pH-switchable glucose-initiated cascade reaction for diabetic wound healing. In the first cascade-reaction, initiated by GOx, the nanozyme gel catalyzes glucose and O2 into gluconic acid and H2O2 to further generate superoxide anion radical (O2·-) and hydroxyl radicals (·OH) to eradicate bacteria. In the second cascade-reaction, as the wound pH changes alkalescent microenvironment, the nanozyme gel simulates SOD to transform O2·- into O2 and H2O2, and then decomposes endogenous and exogenous H2O2 into O2 via CAT-like activity to reduce oxidative stress and alleviate hypoxia. The gel by calcium ion (Ca2+) cross-linked sodium alginate (SA) and chitosan (CS) containing nanozyme was constructed with injectability, adhesion and fluorescence properties, as well as beneficial biocompatible. Importantly, the water/alcohol solubility of the nanozyme gel allows it to be used as a dressing without causing secondary injury to the wound. The multifunctional fluorescence hydrogel exhibits efficiently promote pro-angiogenesis and bacteria-infected wound healing.

Investigation of lethal thresholds of nanosecond pulsed electric field in rabbit VX2 hepatic tumors through finite element analysis and verification with a single-needle bipolar electrode: A prospective strategy employing three-dimensional comparisons.

Pulsed electric field has emerged as a promising modality for the solid tumor ablation with the advantage in treatment planning, however, the accurate prediction of the lesion margin requires the determination of the lethal electric field (E) thresholds. Herein we employ the highly repetitive nanosecond pulsed electric field (RnsPEF) to ablate the normal and VX2 tumor-bearing livers of rabbits. The ultrasound-guided surgery is operated using the conventional double- and newly devised single-needle bipolar electrodes. Finite element analysis is also introduced to simulate the E distribution in the practical treatments. Two- and three-dimensional investigations are performed on the image measurements and reconstructed calcification models on micro-CT, respectively. Specially, an algorithm considering the model surface, volume and shape is employed to compare the similarities between the simulative and experimental models. Blood vessel injury, temperature and synergistic efficacy with doxorubicin (DOX) are also investigated. According to the three-dimensional calculation, the overall E threshold is 4536.4 ± 618.2 V/cm and the single-needle bipolar electrode is verified to be effective in tissue ablation. Vessels are well preserved and the increment of temperature is limited. Synergy of RnsPEF and DOX shows increased apoptosis and improved long-term tumor survival. Our study presents a prospective strategy for the evaluation of the lethal E threshold, which can be considered to guide the future clinical treatment planning for RnsPEF.

Creating Efficient Red Thermally Activated Delayed Fluorescence Materials with Cyano-Substituted 11,12-Diphenyldipyrido[3,2-a:2',3'-c]phenazine Acceptors.

Red luminescent materials are essential components for full color display and white lightening based on organic light-emitting diode (OLED) technology, but the extension of emission color towards red or deep red region generally leads to decreased photoluminescence and electroluminescence efficiencies. Herein, we wish to report two new luminescent molecules (2CNDPBPPr-TPA and 4CNDPBPPr-TPA) consisting of cyano-substituted 11,12-diphenyldipyrido[3,2-a:2',3'-c]phenazine acceptors and triphenylamine donors. As the increase of cyano substituents, the emission wavelength is greatly red-shifted and the reverse intersystem crossing process is promoted, resulting in strong red delayed fluorescence. Meanwhile, due to the formation of intramolecular hydrogen bonds, the molecular structures become rigidified and planarized, which brings about large horizontal dipole ratios. As a result, 2CNDPBPPr-TPA and 4CNDPBPPr-TPA can perform as emitters efficiently in OLEDs, furnishing excellent external quantum efficiencies of 28.8 % at 616 nm and 20.2 % at 648 nm, which are significantly improved in comparison with that of the control molecule without cyano substituents. The findings in this work demonstrate that the introduction of cyano substituents to the acceptors of delayed fluorescence molecules could be a facile and effective approach to explore high-efficiency red or deep red delayed fluorescence materials.