Dispersive Fourier transform based dual-comb ranging.

Laser-based light detection and ranging (LIDAR) offers a powerful tool to real-timely map spatial information with exceptional accuracy and owns various applications ranging from industrial manufacturing, and remote sensing, to airborne and in-vehicle missions. Over the past two decades, the rapid advancements of optical frequency combs have ushered in a new era for LIDAR, promoting measurement precision to quantum noise limited level. For comb LIDAR systems, to further improve the comprehensive performances and reconcile inherent conflicts between speed, accuracy, and ambiguity range, innovative demodulation strategies become crucial. Here we report a dispersive Fourier transform (DFT) based LIDAR method utilizing phase-locked Vernier dual soliton laser combs. We demonstrate that after in-line pulse stretching, the delay of the flying pulses can be identified via the DFT-based spectral interferometry instead of temporal interferometry or pulse reconstruction. This enables absolute distance measurements with precision starting from 262 nm in single shot, to 2.8 nm after averaging 1.5 ms, in a non-ambiguity range over 1.7 km. Furthermore, our DFT-based LIDAR method distinctly demonstrates an ability to completely eliminate dead zones. Such an integration of frequency-resolved ultrafast analysis and dual-comb ranging technology may pave a way for the design of future LIDAR systems.

Harnessing sub-comb dynamics in a graphene-sensitized microresonator for gas detection.

Since their inception, frequency combs generated in microresonators, known as microcombs, have sparked significant scientific interests. Among the various applications leveraging microcombs, soliton microcombs are often preferred due to their inherent mode-locking capability. However, this choice introduces additional system complexity because an initialization process is required. Meanwhile, despite the theoretical understanding of the dynamics of other comb states, their practical potential, particularly in applications like sensing where simplicity is valued, remains largely untapped. Here, we demonstrate controllable generation of sub-combs that bypasses the need for accessing bistable regime. And in a graphene-sensitized microresonator, the sub-comb heterodynes produce stable, accurate microwave signals for high-precision gas detection. By exploring the formation dynamics of sub-combs, we achieved 2 MHz harmonic comb-to-comb beat notes with a signal-to-noise ratio (SNR) greater than 50 dB and phase noise as low as - 82 dBc/Hz at 1 MHz offset. The graphene sensitization on the intracavity probes results in exceptional frequency responsiveness to the adsorption of gas molecules on the graphene of microcavity surface, enabling detect limits down to the parts per billion (ppb) level. This synergy between graphene and sub-comb formation dynamics in a microcavity structure showcases the feasibility of utilizing microcombs in an incoherent state prior to soliton locking. It may mark a significant step toward the development of easy-to-operate, systemically simple, compact, and high-performance photonic sensors.

Optimizing auxiliary laser heating for Kerr soliton microcomb generation.

Auxiliary laser heating has become a widely adopted method for Kerr soliton frequency comb generation in optical microcavities, thanks to its reliable and easy-to-achieve merits for solving the thermal instability during the formation of dissipative Kerr solitons. Here, we conduct optimization of auxiliary laser heating by leveraging the distinct loss and absorption characteristics of different longitudinal and polarization cavity modes. We show that even if the auxiliary and pump lasers enter orthogonal polarization modes, their mutual photothermal balance can be efficient enough to maintain a cavity thermal equilibrium as the pump laser enters the red-detuning soliton regime, and by choosing the most suitable resonance for the auxiliary and pump lasers, the auxiliary laser power can be reduced to 20% of the pump laser and still be capable of warranting soliton generation. Moreover, we demonstrate soliton comb generation using integrated laser modules with a few milliwatt on-chip pump and auxiliary powers, showcasing the potential for further chip integration of the auxiliary laser heating method.

Coherently parallel fiber-optic distributed acoustic sensing using dual Kerr soliton microcombs.

Fiber-optic distributed acoustic sensing (DAS) has proven to be a revolutionary technology for the detection of seismic and acoustic waves with ultralarge scale and ultrahigh sensitivity, and is widely used in oil/gas industry and intrusion monitoring. Nowadays, the single-frequency laser source in DAS becomes one of the bottlenecks limiting its advance. Here, we report a dual-comb-based coherently parallel DAS concept, enabling linear superposition of sensing signals scaling with the comb-line number to result in unprecedented sensitivity enhancement, straightforward fading suppression, and high-power Brillouin-free transmission that can extend the detection distance considerably. Leveraging 10-line comb pairs, a world-class detection limit of 560 fε/√Hz@1 kHz with 5 m spatial resolution is achieved. Such a combination of dual-comb metrology and DAS technology may open an era of extremely sensitive DAS at the fε/√Hz level, leading to the creation of next-generation distributed geophones and sonars.

Soliton Microcombs Multiplexing Using Intracavity-Stimulated Brillouin Lasers.

Solitons in microresonators have spurred intriguing nonlinear optical physics and photonic applications. Here, by combining Kerr and Brillouin nonlinearities in an over-modal microcavity, we demonstrate spatial multiplexing of soliton microcombs under a single external laser pumping operation. This demonstration offers an ideal scheme to realize highly coherent dual-comb sources in a compact, low-cost and energy-efficient manner, with uniquely low beating noise. Moreover, by selecting the dual-comb modes, the repetition rate difference of a dual-comb pair could be flexibly switched, ranging from 8.5 to 212 MHz. Beyond dual-comb, the high-density mode geometry allows the cascaded Brillouin lasers, driving the co-generation of up to 5 space-multiplexing frequency combs in distinct mode families. This Letter offers a novel physics paradigm for comb interferometry and provides a widely appropriate tool for versatile applications such as comb metrology, spectroscopy, and ranging.

Near-zero-dispersion soliton and broadband modulational instability Kerr microcombs in anomalous dispersion.

The developing advances of microresonator-based Kerr cavity solitons have enabled versatile applications ranging from communication, signal processing to high-precision measurements. Resonator dispersion is the key factor determining the Kerr comb dynamics. Near the zero group-velocity-dispersion (GVD) regime, low-noise and broadband microcomb sources are achievable, which is crucial to the application of the Kerr soliton. When the GVD is almost vanished, higher-order dispersion can significantly affect the Kerr comb dynamics. Although many studies have investigated the Kerr comb dynamics near the zero-dispersion regime in microresonator or fiber ring system, limited by dispersion profiles and dispersion perturbations, the near-zero-dispersion soliton structure pumped in the anomalous dispersion side is still elusive so far. Here, we theoretically and experimentally investigate the microcomb dynamics in fiber-based Fabry-Perot microresonator with ultra-small anomalous GVD. We obtain 2/3-octave-spaning microcombs with ~10 GHz spacing, >84 THz span, and >8400 comb lines in the modulational instability (MI) state, without any external nonlinear spectral broadening. Such widely-spanned MI combs are also able to enter the soliton state. Moreover, we report the first observation of anomalous-dispersion based near-zero-dispersion solitons, which exhibits a local repetition rate up to 8.6 THz, an individual pulse duration <100 fs, a span >32 THz and >3200 comb lines. These two distinct comb states have their own advantages. The broadband MI combs possess high conversion efficiency and wide existing range, while the near-zero-dispersion soliton exhibits relatively low phase noise and ultra-high local repetition rate. This work complements the dynamics of Kerr cavity soliton near the zero-dispersion regime, and may stimulate cross-disciplinary inspirations ranging from dispersion-controlled microresonators to broadband coherent comb devices.

A Monolithic Graphene-Functionalized Microlaser for Multispecies Gas Detection.

Optical-microcavity-enhanced light-matter interaction offers a powerful tool to develop fast and precise sensing techniques, spurring applications in the detection of biochemical targets ranging from cells, nanoparticles, and large molecules. However, the intrinsic inertness of such pristine microresonators limits their spread in new fields such as gas detection. Here, a functionalized microlaser sensor is realized by depositing graphene in an erbium-doped over-modal microsphere. By using a 980 nm pump, multiple laser lines excited in different mode families of the microresonator are co-generated in a single device. The interference between these splitting mode lasers produce beat notes in the electrical domain (0.2-1.1 MHz) with sub-kHz accuracy, thanks to the graphene-induced intracavity backward scattering. This allows for lab-free multispecies gas identification from a mixture, and ultrasensitive gas detection down to individual molecule.

High energy and low noise soliton fiber laser comb based on nonlinear merging of Kelly sidebands.

Optical solitons in mode-locked laser cavities with dispersion-nonlinearity interaction, delivers pulses of light that retain their shape. Due to the nature of discretely distributed dispersion and nonlinearity, optical solitons can emit Kelly-sidebands via the frequency coupling of soliton and dispersive waves. In this paper, we generate a high-energy femtosecond laser comb, by using the intracavity Kelly radiations and 3rd order nonlinearities. By increasing the intracavity power, the soliton envelop and the Kelly-sidebands merge together via four-wave-mixing, forming a super-continuum spectrum, obtaining 3.18 nJ pulse energy. A supercontinuum span covering from 1100 nm to 2300 nm for further self-referenced f-2f stabilization can be directly achieved by using an amplification-free external supercontinuum technique. Our finding not only demonstrates a non-trivial frequency-time evolution based on 'erbium + χ(3)' nonlinear gains, but also offers a new opportunity to develop practically compact fiber frequency combs for frequency metrology or spectroscopy.

Nonlinear co-generation of graphene plasmons for optoelectronic logic operations.

Surface plasmons in graphene provide a compelling strategy for advanced photonic technologies thanks to their tight confinement, fast response and tunability. Recent advances in the field of all-optical generation of graphene's plasmons in planar waveguides offer a promising method for high-speed signal processing in nanoscale integrated optoelectronic devices. Here, we use two counter propagating frequency combs with temporally synchronized pulses to demonstrate deterministic all-optical generation and electrical control of multiple plasmon polaritons, excited via difference frequency generation (DFG). Electrical tuning of a hybrid graphene-fibre device offers a precise control over the DFG phase-matching, leading to tunable responses of the graphene's plasmons at different frequencies across a broadband (0 ~ 50 THz) and provides a powerful tool for high-speed logic operations. Our results offer insights for plasmonics on hybrid photonic devices based on layered materials and pave the way to high-speed integrated optoelectronic computing circuits.

Engineering Graphene Grain Boundaries for Plasmonic Multi-Excitation and Hotspots.

Surface plasmons, merging photonics and electronics in nanoscale dimensions, have been the cornerstones in integrated informatics, precision detection, high-resolution imaging, and energy conversion. Arising from the exceptional Fermi-Dirac tunability, ultrafast carrier mobility, and high-field confinement, graphene offers excellent advantages for plasmon technologies and enables a variety of state-of-the-art optoelectronic applications ranging from tight-field-enhanced light sources, modulators, and photodetectors to biochemical sensors. However, it is challenging to co-excite multiple graphene plasmons on one single graphene sheet with high density, a key step toward plasmonic wavelength-division multiplexing and next-generation dynamical optoelectronics. Here, we report the heteroepitaxial growth of a polycrystalline graphene monolayer with patterned gradient grain boundary density, which is synthesized by creating diverse nanosized local growth environments on a centimeter-scale substrate with a polycrystalline graphene ring seed in chemical vapor deposition. Such geometry enables plasmonic co-excitation with varied wavelength diversification in the nanoscale. Via using high-resolution scanning near-field optical microscopy, we demonstrate rich plasmon standing waves, even bright plasmonic hotspots with a size up to 3 µm. Moreover, by changing the grain boundary density and annealing, we find the local plasmonic wavelengths are widely tunable, from 70 to 300 nm. Theoretical modeling supports that such plasmonic versatility is due to the grain boundary-induced plasmon-phonon interactions through random phase approximation. The seed-induced heteroepitaxial growth provides a promising way for the grain boundary engineering of two-dimensional materials, and the controllable grain boundary-based plasmon co-generation and manipulation in one single graphene monolayer will facilitate the applications of graphene for plasmonics and nanophotonics.

Dynamic and Active THz Graphene Metamaterial Devices.

In recent years, terahertz waves have attracted significant attention for their promising applications. Due to a broadband optical response, an ultra-fast relaxation time, a high nonlinear coefficient of graphene, and the flexible and controllable physical characteristics of its meta-structure, graphene metamaterial has been widely explored in interdisciplinary frontier research, especially in the technologically important terahertz (THz) frequency range. Here, graphene's linear and nonlinear properties and typical applications of graphene metamaterial are reviewed. Specifically, the discussion focuses on applications in optically and electrically actuated terahertz amplitude, phase, and harmonic generation. The review concludes with a brief examination of potential prospects and trends in graphene metamaterial.

Wavelength-division multiplexing communications using integrated soliton microcomb laser source.

In this Letter, we report an investigation of the feasibility and performance of wavelength-division multiplexed (WDM) optical communications using an integrated perfect soliton crystal as the multi-channel laser source. First, we confirm that perfect soliton crystals pumped directly by a distributed-feedback (DFB) laser self-injection locked to the host microcavity has sufficiently low frequency and amplitude noise to encode advanced data formats. Second, perfect soliton crystals are exploited to boost the power level of each microcomb line, so that it can be directly used for data modulation, excluding preamplification. Third, in a proof-of-concept experiment, we demonstrate seven-channel 16-quadrature amplitude modulation (16-QAM) and 4-level pulse amplitude modulation (PAM4) data transmissions using an integrated perfect soliton crystal as the laser carrier; excellent data receiving performance is obtained for various fiber link distances and amplifier configurations. Our study reveals that fully integrated Kerr soliton microcombs are viable and advantageous for optical data communications.

Multispecies and individual gas molecule detection using Stokes solitons in a graphene over-modal microresonator.

Soliton frequency combs generate equally-distant frequencies, offering a powerful tool for fast and accurate measurements over broad spectral ranges. The generation of solitons in microresonators can further improve the compactness of comb sources. However the geometry and the material's inertness of pristine microresonators limit their potential in applications such as gas molecule detection. Here, we realize a two-dimensional-material functionalized microcomb sensor by asymmetrically depositing graphene in an over-modal microsphere. By using one single pump, spectrally trapped Stokes solitons belonging to distinct transverse mode families are co-generated in one single device. Such Stokes solitons with locked repetition rate but different offsets produce ultrasensitive beat notes in the electrical domain, offering unique advantages for selective and individual gas molecule detection. Moreover, the stable nature of the solitons enables us to trace the frequency shift of the dual-soliton beat-note with uncertainty <0.2 Hz and to achieve real-time individual gas molecule detection in vacuum, via an optoelectronic heterodyne detection scheme. This combination of atomically thin materials and microcombs shows the potential for compact photonic sensing with high performances and offers insights toward the design of versatile functionalized microcavity photonic devices.

Kilometers Long Graphene-Coated Optical Fibers for Fast Thermal Sensing.

The combination of optical fiber with graphene has greatly expanded the application regimes of fiber optics, from dynamic optical control and ultrafast pulse generation to high precision sensing. However, limited by fabrication, previous graphene-fiber samples are typically limited in the micrometer to centimeter scale, which cannot take the inherent advantage of optical fibers-long-distance optical transmission. Here, we demonstrate kilometers long graphene-coated optical fiber (GCF) based on industrial graphene nanosheets and coating technique. The GCF shows unusually high thermal diffusivity of 24.99 mm2 s-1 in the axial direction, measured by a thermal imager directly. This enables rapid thermooptical response both in optical fiber Bragg grating sensors at one point (18-fold faster than conventional fiber) and in long-distance distributed fiber sensing systems based on backward Rayleigh scattering in optical fiber (15-fold faster than conventional fiber). This work realizes the industrial-level graphene-fiber production and provides a novel platform for two-dimensional material-based optical fiber sensing applications.

Electrically Tunable Four-Wave-Mixing in Graphene Heterogeneous Fiber for Individual Gas Molecule Detection.

Detection of individual molecules is the ultimate goal of any chemical sensor. In the case of gas detection, such resolution has been achieved in advanced nanoscale electronic solid-state sensors, but it has not been possible so far in integrated photonic devices, where the weak light-molecule interaction is typically hidden by noise. Here, we demonstrate a scheme to generate ultrasensitive down-conversion four-wave-mixing (FWM) in a graphene bipolar-junction-transistor heterogeneous D-shaped fiber. In the communication band, the FWM conversion efficiency can change steeply when the graphene Fermi level approaches 0.4 eV. In this condition, we exploit our unique two-step optoelectronic heterodyne detection scheme, and we achieve real-time individual gas molecule detection in vacuum. Such combination of graphene strong nonlinearities, electrical tunability, and all-fiber integration paves the way toward the design of versatile high-performance graphene photonic devices.

2D Material Optoelectronics for Information Functional Device Applications: Status and Challenges.

Graphene and the following derivative 2D materials have been demonstrated to exhibit rich distinct optoelectronic properties, such as broadband optical response, strong and tunable light-mater interactions, and fast relaxations in the flexible nanoscale. Combining with optical platforms like fibers, waveguides, grating, and resonators, these materials has spurred a variety of active and passive applications recently. Herein, the optical and electrical properties of graphene, transition metal dichalcogenides, black phosphorus, MXene, and their derivative van der Waals heterostructures are comprehensively reviewed, followed by the design and fabrication of these 2D material-based optical structures in implementation. Next, distinct devices, ranging from lasers to light emitters, frequency convertors, modulators, detectors, plasmonic generators, and sensors, are introduced. Finally, the state-of-art investigation progress of 2D material-based optoelectronics offers a promising way to realize new conceptual and high-performance applications for information science and nanotechnology. The outlook on the development trends and important research directions are also put forward.

Biochemical sensing in graphene-enhanced microfiber resonators with individual molecule sensitivity and selectivity.

Photonic sensors that are able to detect and track biochemical molecules offer powerful tools for information acquisition in applications ranging from environmental analysis to medical diagnosis. The ultimate aim of biochemical sensing is to achieve both quantitative sensitivity and selectivity. As atomically thick films with remarkable optoelectronic tunability, graphene and its derived materials have shown unique potential as a chemically tunable platform for sensing, thus enabling significant performance enhancement, versatile functionalization and flexible device integration. Here, we demonstrate a partially reduced graphene oxide (prGO) inner-coated and fiber-calibrated Fabry-Perot dye resonator for biochemical detection. Versatile functionalization in the prGO film enables the intracavity fluorescent resonance energy transfer (FRET) to be chemically selective in the visible band. Moreover, by measuring the intermode interference via noise canceled beat notes and locked-in heterodyne detection with Hz-level precision, we achieved individual molecule sensitivity for dopamine, nicotine and single-strand DNA detection. This work combines atomic-layer nanoscience and high-resolution optoelectronics, providing a way toward high-performance biochemical sensors and systems.

Gate-tunable frequency combs in graphene-nitride microresonators.

Optical frequency combs, which emit pulses of light at discrete, equally spaced frequencies, are cornerstones of modern-day frequency metrology, precision spectroscopy, astronomical observations, ultrafast optics and quantum information1-7. Chip-scale frequency combs, based on the Kerr and Raman nonlinearities in monolithic microresonators with ultrahigh quality factors8-10, have recently led to progress in optical clockwork and observations of temporal cavity solitons11-14. But the chromatic dispersion within a laser cavity, which determines the comb formation15,16, is usually difficult to tune with an electric field, whether in microcavities or fibre cavities. Such electrically dynamic control could bridge optical frequency combs and optoelectronics, enabling diverse comb outputs in one resonator with fast and convenient tunability. Arising from its exceptional Fermi-Dirac tunability and ultrafast carrier mobility17-19, graphene has a complex optical dispersion determined by its optical conductivity, which can be tuned through a gate voltage20,21. This has brought about optoelectronic advances such as modulators22,23, photodetectors 24 and controllable plasmonics25,26. Here we demonstrate the gated intracavity tunability of graphene-based optical frequency combs, by coupling the gate-tunable optical conductivity to a silicon nitride photonic microresonator, thus modulating its second- and higher-order chromatic dispersions by altering the Fermi level. Preserving cavity quality factors up to 106 in the graphene-based comb, we implement a dual-layer ion-gel-gated transistor to tune the Fermi level of graphene across the range 0.45-0.65 electronvolts, under single-volt-level control. We use this to produce charge-tunable primary comb lines from 2.3 terahertz to 7.2 terahertz, coherent Kerr frequency combs, controllable Cherenkov radiation and controllable soliton states, all in a single microcavity. We further demonstrate voltage-tunable transitions from periodic soliton crystals to crystals with defects, mapped by our ultrafast second-harmonic optical autocorrelation. This heterogeneous graphene microcavity, which combines single-atomic-layer nanoscience and ultrafast optoelectronics, will help to improve our understanding of dynamical frequency combs and ultrafast optics.

Optical Graphene Gas Sensors Based on Microfibers: A Review.

Graphene has become a bridge across optoelectronics, mechanics, and bio-chemical sensing due to its unique photoelectric characteristics. Moreover, benefiting from its two-dimensional nature, this atomically thick film with full flexibility has been widely incorporated with optical waveguides such as fibers, realizing novel photonic devices including polarizers, lasers, and sensors. Among the graphene-based optical devices, sensor is one of the most important branch, especially for gas sensing, as rapid progress has been made in both sensing structures and devices in recent years. This article presents a comprehensive and systematic overview of graphene-based microfiber gas sensors regarding many aspects including sensing principles, properties, fabrication, interrogating and implementations.