RESUMEN
The efficient crack eliminated stop-hole measure was proposed to repair and reduce the stress concentration associated fracture risk of the corrugated plate girders by setting it at the critical joint of flange plate with tightened bolts and gaskets under preloading. To investigate the fracture behaviour of these repaired girders, parametric finite element analysis was conducted, focusing on the mechanical feature and stress intensity factor of crack stop-hole in this paper. The numerical model was verified against experimental results first, and then the stress characteristics due to the presence of crack open-hole were analysed. It was found that the moderate-sized open-hole was more effective than the over-sized open-hole in the reduction of stress concentration. For the model with prestressed crack stop-hole through bolt preloading, the stress concentration was nearly 50% with the prestress around open-hole increased to 46 MPa, but such a reduction is inconspicuous for even higher prestress. Relatively high circumferential stress gradients and the crack open angle of oversized crack stop-holes were decreased owing to additional prestress effects from the gasket. Finally, the shift from the original tensile area around the edge of the crack open-hole that was prone to fatigue cracking to a compression-oriented area is beneficial for the reduction of stress intensity factor of the prestressed crack stop-holes. It was also demonstrated that the enlargement of crack open-hole has limited influence on the reduction of stress intensity factor and crack propagation. In contrast, higher bolt prestress was more beneficial in consistently reducing the stress intensity factor of the model with the crack open-hole, even containing long crack.
RESUMEN
Based on analyzing the bearing capacity of existing T-beam bridges in service, the factors that affect the T-beams cracked by chloride ions mainly include the width and the depth of cracks. Combined with practical engineering examples, a single-piece T-beam model is established to explore the influence of factors such as crack width and crack depth on the T-beams affected by chloride ion erosion through numerical simulation in this paper. In addition, the attenuation models of bending capacity and shear capacity of the T-beam are obtained to analyze the possible failure modes of T-beams with cracks. All of which provides a reference for exploring the effect of crack width and depth on the durability of reinforced concrete members under chloride ion field.
RESUMEN
Composed of multi-strand parallel high-strength wires or steel strands, the stayed cables have been widely used recently in stayed bridges or suspension bridges owing to their light weight and high bearing capacity, especially the steel strands. Meanwhile, chloride-induced corrosion of steel strands is one of the most considerable factors for the durability of the stayed cable exposed to marine environments. The fatigue caused by both cyclic loading and corrosion can affect the life of the steel strands. Besides, the current studies related to the effects of the aforementioned two impact factors on the life of the steel strands either considered the fatigue only, or took the two impact factors into account separately. The coupling effects of fatigue and corrosion on the life of the steel strands are required to be further explored and discussed. Consequently, it is essential to create a model to predict the life of the steel strands with the coupling effects taken into consideration. In this paper, an indoor physical experiment of the steel strand specimens exposed to marine tidal environment was carried out. To avoid accidental errors, the whole specimens were divided into 20 groups, with each group having two steel wires with a 5 days, 10 days, and 15 days cycle for the test. The corrosion of steel strands was observed at various exposure times and it was found that the pits were formed on the surface with the chloride ion erosion to the steel strands. Deeper and sharper pits result in greater pitting-local stress and a shorter fatigue life, which is also the main reason for reducing the carrying capacity of the steel strands. However, a detailed description for this problem is lacking in current domestic and foreign literature, because the pit is hard to predict owing to its complex nature. In order to simulate the evolution of the pits, the stochastic pitting-corrosion model was set up by the neural network method to evaluate the pit evolutions over time. In addition, an empirical formula consisting of length-width ratios, length-depth ratios, and depth-to-width ratios of the pits was obtained to determine the stress concentration factor based on the multi-dimensional linear regression method. The fatigue notch factor of components can be deduced by the stress concentration factor, and the life of the steel strands can be deduced by both of them. The findings are expected to be useful in realistically predicting the durability of wire structures.
RESUMEN
Cathodic protection (CP) is being increasingly used on reinforced concrete structures to protect steel reinforcing bars from corrosion in aggressive conditions. Due to the complexity of environmental conditions, the design specifications in national and international standards are still open to discussion to achieve both sufficient and efficient protection for reinforced concrete structures in engineering practices. This paper reports an experimental research to investigate the influence of chloride content on concrete resistivity, rebar corrosion rate and the performance of CP operation using different current densities. It aims to understand the correlation between the chloride content and concrete resistivity together with the CP current requirement, and to investigate the precision of the CP design criteria in standards.