Hyaluronic Acid Conjugated Metformin-Phospholipid Sonocomplex: A Biphasic Complexation Approach to Correct Hypoxic Tumour Microenvironment.

PURPOSE: Development of hyaluronic acid conjugated metformin-phospholipid sonocomplexes (HA-MPS), a biphasic complexation product compiled for enhancing both the lipophilicity and targeting potential of Metformin (MET) to CD44 receptors on pancreatic cancer. METHODS: MET was chemically conjugated to hyaluronic acid (HA) via amide coupling reaction. Then, the HA conjugated MET was physically conjugated to Lipoid™S100 via ultrasound irradiation. A combined D-optimal design was implemented to statistically optimize formulation variables. The HA-MPS were characterized through solubility studies, partition coefficient, drug content uniformity, particle size and zeta potential. The optimized HA-MPS was tested via proton nuclear magnetic resonance, infrared spectroscopy to elucidate the nature of physicochemical interactions in the complex which was further scrutinized on molecular level via molecular docking and dynamic simulation. RESULTS: The solubility and partition studies showed a lipophilicity enhancement up to 67 folds as they adopted inverted micelles configuration based on the packing parameter hypothesis. The optimized HA-MPS showed 11.5 folds lower IC50, extra 25% reduction in oxygen consumption rate, better reduction in hypoxia-inducible factor and reactive oxygen species in MiaPaCa-2 cells. CONCLUSION: These results proved better internalization of MET which was reflected by abolishing hypoxic tumour microenvironment, a mainstay toward a normoxic and less resistant pancreatic cancer.

Metformin hydrochloride and wound healing: from nanoformulation to pharmacological evaluation.

Niosomes as drug delivery systems have the ability to decrease drugs' side effects and increase their therapeutic effectiveness. Metformin HCl is an oral antihyperglycemic agent belonging to biguanides. It is the most commonly chosen drug as a startup therapy for patients newly diagnosed with type 2 diabetes. This study aims to encapsulate metformin HCl inside niosomes to be used as a transdermal formulation helping to prolong its antidiabetic effect and investigate its ability to enhance wound healing in diabetic patients. Thin film hydration method was used to prepare metformin HCl niosomes using different proportions of Span 60, Span 40, Tween 80, and cholesterol. All formulations were characterized using transmission electron microscope, zeta potential, and vesicle size. In vitro release studies, stability studies and in vivo evaluation were conducted on selected niosomal formulations. The results of entrapment efficiency ranged from 13% to 32%. Vesicle sizes were determined in nano-range. The in vitro release profile of metformin HCl from niosomes occurred in two consecutive phases. Biological evaluation on diabetic rats revealed that metformin HCl niosomal gel given every 2 days showed a better sustained antidiabetic effect than oral doses given daily. It also showed an improvement in wound healing for diabetic rats given metformin formulations compared to nontreated ones.

Polymeric and Non Polymeric Injectable In-situ Forming Implant Systems for Sustained Delivery of Lornoxicam: In vitro and In vivo Evaluation.

OBJECTIVE: Formulation of injectable In situ forming implant (ISI) systems of lornoxicam for dental and postoperative pain management to decrease dosing frequency and increase patient compliance. METHODS: Polymeric in situ implant solutions were prepared using different concentrations and inherent viscosities of Poly-DL-lactide (PDL) or DL-lactide/glycolide copolymer (PDLG) using 22X4 factorial experimental design. Nonpolymeric systems were prepared using different concentrations of lipids like cetyl alcohol and stearyl alcohol and also sucrose acetate isobutyrate (SAIB) using 32 factorial experimental design. In vitro release study, rheological measurement, syringeability assessment and effect of γ-sterilization were used for evaluation of the prepared formulae. In vivo pharmacokinetic study of lornoxicam from the most optimum formula was conducted in a rabbit model using HPLC analysis of blood samples. RESULTS: Polymeric systems showed high burst release followed by very slow release rate over 72 hours. Formula I 24 (containing SAIB 80% (w/w)) showed relatively low burst release followed by diffusion controlled release pattern, low viscosity, Newtonian flow behavior and good syringeability. γ- sterilization had no significant effect on the in vitro release and the physical nature of the most optimum formula. In vivo study concluded that intramuscularly injected In situ implant formula I 24 showed prolonged release pattern compared to the marketed product which was indicated by the increased Tmax and the extended mean residence time. CONCLUSION: Lornoxicam ISI systems could be promising as convenient injectable sustained release delivery systems for dental and postoperative pain management.

Zaleplon loaded bi-layered chronopatch: A novel buccal chronodelivery approach to overcome circadian rhythm related sleep disorder.

The aim of this study was to develop a novel buccal bi-layered chronopatch capable of eliciting pulsatile release pattern of drugs treating diseases with circadian rhythm related manifestation. Zaleplon (ZLP) was used as a model drug intended to induce sleep and to treat middle of night insomnia. The chronopatch was prepared adopting double casting technique. The first layer was composed of a controlled release patch containing ZLP-Precirol melt granules intended to release ZLP in a sustained manner to maintain sleep and to prevent early morning awakening. The second layer was composed of a fast release lyophilized buccal disc containing ZLP loaded SNEDDS (Z-SNEDDS) intended for rapid sleep induction. Pharmacokinetic parameters of ZLP from the chronopatch were compared to those of the immediate release capsule, Siesta®, as reference in Mongrel dogs using a randomized crossover design. The appearance of two peaks having two Cmax and Tmax proved the pulsatile release pattern. The increase in relative bioavailability of ZLP from the chronopatch was 2.63 folds. The results revealed the ability of the developed ZLP loaded bi-layered chronopatch to be a candidate for overcoming early morning awakening without middle of night dose administration.

Biodegradable donepezil lipospheres for depot injection: optimization and in-vivo evaluation.

OBJECTIVES: The purpose of this study was to develop an injectable depot liposphere delivery system with high loading capacity for controlled delivery of donepezil to decrease dosing frequency and increase patient compliance. METHODS: A 3(2) full factorial design was employed to study the effect of lipid type and drug-to-lipid ratio on the yield, encapsulation efficiency, mean diameter and the time required for 50% drug release (t(50%) ). The pharmacokinetic behaviour of the lipospheres in rabbits was studied using tandem mass spectrometry. KEY FINDINGS: The yields of preparations were in the range of 66.22-90.90%, with high encapsulation efficiencies (89.68-97.55%) and mean particle size of 20.68-35.94 µm. Both lipid type and drug-to-lipid ratio significantly affected t(50%) (P<0.0001), where the lipids can be arranged: glyceryl tripalmitate>compritol>cetyl alcohol, and the drug-to-lipid ratios can be arranged: 1:40>1:20>1:10. The flow time of lipospheres through 19-gauge syringe needle was less than 6s indicating good syringeability. The mean residence time of the subcutaneous and intramuscular lipospheres was significantly higher than the solution (almost 20 fold increase), with values of 11.04, 11.34 and 0.53 days, respectively (P<0.01). CONCLUSION: Subcutaneous and intramuscular delivery of donepezil glyceryl tripalmitate lipospheres achieves depot release, allowing less frequent dosing.

A novel injectable in situ forming poly-DL-lactide and DL-lactide/glycolide implant containing lipospheres for controlled drug delivery.

One of the greatest challenges in in situ forming implant (ISFI) systems by polymer precipitation is the large burst release during the first 1-24 hours after implant injection. The aim of this study was to decrease the burst-release effect of a water-soluble model drug, donepezil HCl, with a molecular weight of 415.96 Da, from in situ forming implants using a novel in situ implant containing lipospheres (ISILs). In situ implant suspensions were prepared by dispersing cetyl alcohol and glyceryl stearate lipospheres in a solution of poly-DL-lactide (PDL) or DL-lactide/glycolide copolymer (PDLG). Also, in situ implant solutions were prepared using different concentrations of PDL or PDLG solutions in N-methyl-2-pyrrolidone (NMP). Triacetin and Pluronic L121 were used to modify the release pattern of donepezil from the in situ implant solutions. In vitro release, rheological measurement, and injectability measurement were used to evaluate the prepared in situ implant formulae. It was found that ISIL decreased the burst effect as well as the rate and extent of drug release, compared to lipospheres, PDL, and PDLG in situ implant. The amount of drug released in the first day was 37.75, 34.99, 48.57, 76.3, and 84.82% for ISIL in 20% PDL (IL-1), ISIL in 20% PDLG (IL-2), lipospheres (L), 20% PDL ISFI (I5), and 20% PDLG ISFI (I8), respectively. The prepared systems showed Newtonian flow behavior. ISIL (IL-1 and IL-2) had a flow rate of 1.94 and 1.40 mL/min, respectively. This study shows the potential of using in situ implants containing lipospheres in controlling the burst effect of ISFI.

Pulsatile systems for colon targeting of budesonide: in vitro and in vivo evaluation.

The purpose of this study is to increase the lag time and prevent release of budesonide, a corticosteroid drug used in Crohn's disease for the first 5 h and efficiently deliver it to the colon. Eudragit S100 spray-coated capsules and pulsatile systems using tablet plugs of cellulose acetate butyrate (CAB), HPMC K4M, guar gum, and pectin were prepared. Eudragit S100-coated capsules released 80.62% after 5 h. In pulsatile systems, decreasing the ratio of the polymer significantly increased the rate and extent of drug release. Spray-coating with EUD S100 decreased the extent of drug release to 48.41%, 69.94%, 80.58%, and 45.23% in CAB, HPMC K4M, pectin, and guar gum, respectively; however, the entire amount was released in the target area. In the presence of bacterial enzymes, selected formulas showed nearly 100% release. X-ray imaging performed to monitor the capsules throughout the GIT in human volunteers of the capsules and spray-coated pulsatile systems with 25% guar gum in the plug showed bursting in the transverse and ascending colon, respectively. Both formulations showed marked reduction in induced rabbit colitis model.

Fluconazole mucoadhesive buccal films: in vitro/in vivo performance.

Fluconazole mucoadhesive buccal films were prepared using film forming polymers namely; hydroxypropyl methyl cellulose (HPMC), hydroxyethyl cellulose (HEC), chitosan, Eudragit and sodium alginate (SALG) either alone or in combination with bioadhesive polymers. The bioadhesive polymers studied were sodium carboxymethyl cellulose (SCMC), Carbopol 974P, and polycarbophil (AA-A). The prepared films were characterized by means of film thickness, surface pH, swelling capacity, in vitro adhesion, in vivo residence time, in vitro drug release and in vivo drug release to determine the amount of drug release from selected film formulae using microbiological assay and HPLC. Optimum release behavior, convenient bioadhesion, acceptable elasticity were exhibited by film containing 2% HPMC and 1% SCMC (fresh or stored for 6 months). Determination of the amount of drug released in saliva after application of the selected fluconazole films confirmed the ability of the film to deliver the drug over a period of approximately 300 minutes and to reduce side effects and possibility of drug interaction encountered during systemic therapy of fluconazole, which would be beneficial in the case of oral candidiasis.

Optimization of budesonide compression-coated tablets for colonic delivery.

The purpose of this study was to formulate budesonide (BUD) compression-coated tablets for colonic specific delivery. Pectin and guar gum were used as enzyme-dependent polymers. For comparison purposes, both pH- and time-dependent polymers were also tried. In vitro release studies were carried out at different pH (1.2, 6.8, and 7.4). Therapeutic efficacy of the prepared tablets compared to commercially available capsules and enema were evaluated in trinitrobenzenesulfonic acid-induced rabbit colitis model. In pH-dependent polymers, Eudragit (EUD) S100/EUD L100 (1:1) released 45.58% in the target area (colon). For time-dependent polymers, decreasing cellulose acetate butyrate (CAB) ratio increased the release in both pH 6.8 and 7.4 till it reached 40.58% and 93.65%, respectively, for 25% CAB. In enzyme-dependent polymers, increasing pectin ratio to 75% retarded the release (4.59% in pH 6.8 and 54.45% in pH 7.4) which was significantly enhanced to 99.31% using pectinolytic enzyme. Formula F14 coated with 75% pectin significantly reduced the inflammatory cells in the connective tissue core of the colon of the treated group and significantly decreased myeloperoxidase activity (3.90 U/g tissue weight). This study proved that BUD compression-coated with 75% pectin may be beneficial in the treatment of inflammatory bowel disease.

Design and in vitro/in vivo evaluation of novel mucoadhesive buccal discs of an antifungal drug: relationship between swelling, erosion, and drug release.

Two groups of fluconazole mucoadhesive buccal discs were prepared: (a) Fluconazole buccal discs prepared by direct compression containing bioadhesive polymers, namely, Carbopol 974p (Cp), sodium carboxymethyl cellulose (SCMC), or sodium alginate (SALG) in combination with hydroxypropyl methylcellulose (HPMC) or hydroxyethyl cellulose (HEC). (b) Fluconazole buccal discs prepared by freeze drying containing different polymer combinations (SCMC/HPMC, Cp/HPMC, SALG/HPMC, and chitosan/SALG). The prepared discs were evaluated by investigating their release pattern, swelling capacity, mucoadhesion properties, and in vitro adhesion time. In vivo evaluation of the buccal disc and in vivo residence times were also performed. Fluconazole salivary concentration after application of fluconazole buccal systems to four healthy volunteers was determined using microbiological assay and high-performance liquid chromatography. SCMC/HPMC buccal disc prepared by direct compression could be considered comparatively superior mucoadhesive disc regarding its in vitro adhesion time, in vivo residence time, and in vitro/in vivo release rates of the drug. Determination of the amount of drug released in saliva after application of the selected fluconazole disc confirmed the ability of the disc to deliver the drug over a period of approximately 5 h and to reduce side effects and possibility of drug interaction encountered during systemic therapy of fluconazole, which would be beneficial in the case of oral candidiasis.