Photoactive main-group complexes have been relatively underexplored in photocatalytic applications. Herein, we report a family of indium(III) complexes (In-1-In-4) containing pyridylpyrrolide ligands with different amounts of methyl groups, which all exhibit intense visible-light absorption as well as blue-green emission with nanosecond emission lifetimes and emission quantum yields of 6.7-12.5%. Electrochemical studies and quantum chemical calculations indicate that their (photo-)redox processes involve only ligand-centered events, which efficiently mediate photocatalytic dehalogenation and olefin reduction.
A series of novel Cp*Ir complexes with nitrogen-rich NÌN bidentate ligands were developed for the catalytic dehydrogenation of formic acid in water under base-free conditions. These complexes were synthesized by using pyridyl 1,2,4-triazole, methylated species, or pyridyl 1,2,3-triazole as a N-site regulation ligand and were fully characterized. Complex 1-H2O bearing 1,2,4-triazole achieved a high turnover frequency of 14192 h-1 at 90 °C in 4 M FA aqueous solution. The terminal and bridged Ir-H intermediates of 1-H2O were successfully detected by 1H NMR and mass spectrometry measurements. Kinetic isotope effect experiments and density functional theory (DFT) calculations were performed; then a plausible mechanism was proposed involving the ß-hydride elimination and formation of H2. Water-assisted H2 release was proven to be the rate-determining step of the reaction. The distribution of Mulliken charges on N atoms of triazole ligand internally revealed that the ortho site N2 of 1-H2O with a higher electron density was conducive to efficient proton transfer. Additionally, the advantage of water-assisted short-range bridge of 1,2,4-triazole moieties led to a higher catalytic activity of 1-H2O. This study demonstrated the effectiveness of nitrogen-rich ligands on FA dehydrogenation and revealed a good strategy for N site regulation in the development of new homogeneous catalysts.
The accurate identification of catalytic sites in heterogeneous catalysts poses a significant challenge due to the intricate nature of controlling interfacial chemistry at the molecular level. In this study, we introduce a novel strategy to address this issue by utilizing a thiacalix[4]arene (TC4A)-protected Ti-oxo core as a template for loading Ag1+ ions, leading to the successful synthesis of a unique Ag/Ti bimetallic nanocluster denoted as Ti8Ag8. This nanocluster exhibits multiple surface-exposed Ag sites and possesses a distinctive "core-shell" structure, consisting of a {Ti4@Ag8(TC4A)4} core housing a {Ti2O2@Ag4(TC4A)2} motif and two {Ti@Ag2(TC4A)} motifs. To enable a comprehensive analysis, we also prepared a Ti2Ag4 cluster with the same {Ti2O2@Ag4(TC4A)2} structure found within Ti8Ag8. The structural disparities between Ti8Ag8 and Ti2Ag4 provide an excellent platform for a comparison of catalytic activity at different Ag sites. Remarkably, Ti8Ag8 exhibits exceptional performance in the electroreduction of CO2 (eCO2RR), showcasing a CO faradaic efficiency (FECO) of 92.33% at -0.9 V vs. RHE, surpassing the FECO of Ti2Ag4 (69.87% at -0.9 V vs. RHE) by a significant margin. Through density functional theory (DFT) calculations, we unveil the catalytic mechanism and further discover that Ag active sites located at {Ti@Ag2(TC4A)} possess a higher εd value compared to those at {Ti2O2@Ag4(TC4A)2}, enhancing the stabilization of the *COOH intermediate during the eCO2RR. This study provides valuable insights into the accurate identification of catalytic sites in bimetallic nanoclusters and opens up promising avenues for efficient CO2 reduction catalyst design.
Nanocluster catalysts face a significant challenge in striking the right balance between stability and catalytic activity. Here, we present a thiacalix[4]arene-protected 6-electron [Ag30(TC4A)4(iPrS)8] nanocluster that demonstrates both high stability and catalytic activity. The Ag30 nanocluster features a metallic core, Ag104+, consisting of two Ag3 triangles and one Ag4 square, shielded by four {Ag5@(TC4A)4} staple motifs. Based on DFT calculations, the Ag104+ metallic kernel can be viewed as a trimer comprising 2-electron superatomic units, exhibiting a valence electron structure similar to that of the Be3 molecule. Notably, this is the first crystallographic evidence of the trimerization of 2-electron superatomic units. Ag30 can reduce CO2 into CO with a Faraday efficiency of 93.4% at -0.9 V versus RHE along with excellent long-term stability. Its catalytic activity is far superior to that of the chain-like AgI polymer ∞1{[H2Ag5(TC4A)(iPrS)3]} (∞1Agn), with the composition similar to Ag30. DFT calculations elucidated the catalytic mechanism to clarify the contrasting catalytic performances of the Ag30 and ∞1Agn polymers and disclosed that the intrinsically higher activity of Ag30 may be due to the greater stability of the dual adsorption mode of the *COOH intermediate on the metallic core.
The regulation of ancillary ligands is critical to improve catalysis of Cp*Ir complexes for CO2 hydrogenation. Herein, a series of Cp*Ir complexes with N^N or N^O ancillary ligands were designed and synthesized. These N^N and N^O donors were derived from the pyridylpyrrole ligand. The solid-state structures of Cp*Ir complexes featured a pendant pyridyl group in 1-Cl and 1-SO4 and a pyridyloxy group in 2-Cl, 3-Cl, 2-SO4, and 3-SO4. These complexes were employed as catalysts for CO2 hydrogenation to formate in the presence of alkali under a pressure range of 0.1-8 MPa and temperature range of 25-120 °C. The catalytic activity of 2-SO4 with a pyridyloxy pendant group dramatically outperformed that of 1-SO4 and 3-SO4. The TOF of conversion of CO2 into formate reached 263 h-1 at 25 °C under a total pressure of 8 MPa (CO2/H2 = 1:1). The experiments and density functional theory calculations revealed that a pendant base in metal complexes plays a key role in the rate-determining heterolytic H2 splitting and enhancing the proton transfer by forming a hydrogen bonding bridge thereby improving the catalytic activity.
This study used the tert-butylcalix[6]arene (TBC[6]) as the ligand and successfully synthesized six TBC[6]-stabilized titanium-oxo clusters (TOCs) by the one-step solvothermal reaction. These six compounds were [Ti4O2(TBC[6])2] (Ti4), {Ti2(TBC[6])(EtO)2(SaH2)2} (Ti2-SA, H2Sa = squaric acid), {Ti2(TBC[6])2(EtO)2(Oa)} (Ti2-OA, H2Oa = oxalic acid), [H2Ti4(TBC[6])(BA)2(EtO)10] (Ti4-BA, HBA = benzoic acid), [Ti6O2(TBC[6])(BA)4(OiPr)10] (Ti6-BA), and [Ti8(TBC[6])2(Sal)4(EtO)16] (Ti8-Sal, H2Sal = salicylic acid). These clusters contain one or two TBC[6] ligands, with the biconical or monoconical configuration, greatly increasing the variety of TOCs it could support. The introduction of auxiliary carboxylic ligands can further stimulate the growth of structures, with the cluster core gradually increased from {Ti-TBC[6]-Ti} to {Ti2-TBC[6]-Ti2}, to {Ti3-TBC[6]-Ti3}, and finally to {Ti3-TBC[6]-Ti2-TBC[6]-Ti3} with 3.1 nm length. Structural regulation may affect their solution stability, absorption spectra, and photocurrent response. The study of catalytic activities shows that these clusters can be used as recyclable heterogeneous photocatalysts for the oxidation of sulfide to sulfoxide. The catalytic efficiency of the TBC[6]-Tix system is closely related to the cluster structure, and the exposure of the Ti site on the catalyst surface can significantly enhance the catalytic activity of the clusters.
Accurate manipulation of ligands at specific sites in robust clusters is attractive but difficult, especially for those ligands that coordinate in intricate binding patterns. By linking the shuttlecock-like {Cu4(µ4-Cl)TC4A} motif and the phenylphosphate (PhPO32-) ligand, we elaborately design and synthesize two Cu(II)-thiacalix[4]arene metallamacrocycles (MMCs), namely Cu12L3 and Cu16L4, which have regular triangular and quadrilateral topologies, respectively. While keeping the core intact, the Cl- and PhPO32- in those two MMCs, which coordinated in a µ4-bridging fashion, can be accurately substituted with salicylate ligands. Theoretical calculations have been carried out to reveal the effect of ligand tailoring on the electronic structure of clusters. Structural regulation can affect the catalytic activity of these clusters, which has been verified by using the clusters as catalysts for selective sulfide oxidation.
Exploiting noble-metal-free systems for high-performance photocatalytic CO2 reduction still presents a key challenge, partially due to the long-standing difficulties in developing potent and durable earth-abundant photosensitizers. Therefore, based on the very cheap aluminum metal, we have deployed a systematic series of homoleptic Al(III) photosensitizers featuring 2-pyridylpyrrolide ligands for CO2 photoreduction. The combined studies of steady-state and time-resolved spectroscopy as well as quantum chemical calculations demonstrate that in anerobic CH3CN solutions at room temperature, visible-light excitation of the Al(III) photosensitizers leads to an efficient population of singlet excited states with nanosecond-scale lifetimes and notable emission quantum yields (10-40%). The results of transient absorption spectroscopy further identified the presence of emissive singlet and unexpectedly nonemissive triplet excited states. More importantly, the introduction of methyl groups at the pyrrolide rings can greatly improve the visible-light absorption, reducing power, and durability of the Al(III) photosensitizers. With triethanolamine, BIH (1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazole), and an Fe(II)-quaterpyridine catalyst, the most methylated Al(III) photosensitizer achieves an apparent quantum efficiency of 2.8% at 450 nm for selective (>99%) CO2-to-CO conversion, which is nearly 28 times that of the unmethylated one (0.1%) under identical conditions. The optimal system realizes a maximum turnover number of 10250 and higher robustness than the systems with Ru(II) and Cu(I) benchmark photosensitizers. Quenching experiments using fluorescence spectroscopy elucidate that the photoinduced electron transfer in the Al(III)-sensitized system follows a reductive quenching pathway. The remarkable tunability and cost efficiency of these Al(III) photosensitizers should allow them as promising components in noble-metal-free systems for solar fuel conversion.
High-valence Ti(IV)-based metallocalixarene coordination cages that are linked by oriented ancillary ligands are unknown so far. Herein, the first family of tunable calixarene-based coordination cages of Ti(IV) with a framework formula [Ti12(OiPr)12(TBC[4])6L6] have been assembled from six {Ti2(OiPr)2(TBC[4])}2+ nodes and six pyridinedicarboxylic ligands. Furthermore, the {Ti12L6} cage showed strong photocatalytic H2 evolution activity, and DFT studies were performed to explore its electronic structure.
Incorporating heterometal into titanium-oxygen clusters (TOCs) is an effective way to improve its catalytic activity. Herein, we synthesize three novel heterometallic TOCs with the formula of [Ti6Cu2O7(Dmg)2(OAc)4(iPrO)6][H2Ti6Cu2O7(Dmg)2(OAc)4(iPrO)8] ({Ti6Cu2}), [Ti8Cu2O9(Dmg)2(OAc)2(iPrO)12] ({Ti8Cu2}), and [Ti10Co2O6(Dmg)2(Pdc)4(iPrO)18Cl3] ({Ti10Co2}, DmgH2 = dimethylglyoxime; PdcH2 = pyridine-2,3-dicarboxylic acid) using dimethylglyoxime and different carboxylates as the synergistic ligands. By depositing the clusters {Ti6Cu2} and {Ti10Co2} on carbon cloth as electrodes, we investigated the electrocatalytic performance of TOCs for full water splitting for the first time. To reach a 10 mA cm-2 current density in an alkaline solution, the {Ti10Co2}@CC electrode needs an overpotential as low as 120 and 400 mV for the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER), respectively. In addition, full water-splitting equipment with {Ti10Co2}@CC as a cathode and an anode need only 1.67 V to deliver a current density of 10 mA cm-2. Our work confirmed the potential of noble metal-free TOCs as bifunctional cluster-based electrocatalysts for water splitting, and their activities can be tuned by doping with different metal ions.
Polyhedral metallocalixarene nanocage clusters based on pure Ti(IV) ions are to our knowledge unknown hitherto. Herein we report the first Ti(IV)-based metallocalixarene nanocage cluster by assembling a [Ti13O14] cage with six t-butylcalix[4]arene molecules. Notably, the cluster exhibits extraordinary stability in high-concentration acid/alkali solutions and can act as a stable photocatalyst to catalyze the oxidation of ammonia to imines.
Here, we systematically studied the self-assembly behavior of chiral polyoxytitanium clusters for the first time. Through the cooperative assembly of ferrocenecarboxylic acid and ketoxime ligands, we successfully incorporated the planar chirality of ferrocene (Fc) into the layered {Ti5} building blocks. The resulting {Ti5Fc} clusters can be used as structural units to assemble into large ordered structures in various ways; either a pair of {Ti5Fc} enantiomers are bridged by organic adhesive to form sandwich structures or two homochiral {Ti5Fc} units participate in the assembly to form the large clusters. Depending on the assembly modes, the chirality of {Ti5Fc} can be transferred to large nanoclusters or disappear to form mesostructures. The difference of the assembly modes between the {Ti5Fc} units can also tune the photoelectric activity of the resulting clusters, which has been verified by using {Ti10Fc-6/7} as catalysts for photocatalytic selective sulfide oxidation. This work not only is an important breakthrough in the study of the self-assembly of chiral nanoclusters but also provides an important reference for understanding of chiral transfer on the nanoscale.
Cooperative assembly of the neutral cluster {Ti8O5(OEt)18L2} (L = pyrazine-2,3-dicarboxylic acid) with different metal units of Mn(NO3)2, CuCl2, Zn(OEt)2, Cd(NO3)2, Ce(NO3)3, Lu(NO3)3, and Lu(NO3)2(OEt), or the [Cu2I2] cluster, generates a family of titanium-oxygen cluster (TOC)-based coordination polymers. These one-dimensional (1D) linear structures contain the same {Ti8L2} cluster but with variable bridging metal units. The regulation of the heterometal not only affects the chain geometries of the {MTi8} but also affects the way the 1D chains are stacked in the crystal lattice. Investigation of the catalytic activities toward alcohol oxidation demonstrated the synergetic effect of combining the metal site and the photosensitive {Ti8L2} cluster in the tailored structure. Under light illumination, the {MTi8} with dual catalytic sites shows greatly enhanced catalytic activity in the selective oxidation of alcohols to aldehydes. Because the compositions and structures of {MTi8} are highly tunable, this work spotlights the potential of utilizing such metal-bridged multidimensional Ti-oxo materials for cooperative photoredox catalysis for organic transformation.
Incorporating heterometal and chromogenic groups into the titanium oxo cluster (TOC) nanomaterials is one of the effective strategies for the development of new high-performance photoelectrically active materials. In this Article, we report the structures and photoelectrochemical (PEC) performances of a family of TOCs, including pure [Ti12O8(OEt)16L8] ({Me-Ti12}) and six Cd-doped clusters formulated as [H4Cd2Ti10O8(OEt)16(L)8(H2O)2] ({Cd2Ti10}; L = salicylic acid and their derivatives). The six Cd-doped clusters are isostructural, containing the same {Cd2Ti10O8} core, but are protected by salicylic ligands modified with different functional groups. The compositions, structures, and solution stability of these clusters have been studied in detail by single-crystal X-ray diffraction and electrospray ionization mass spectrometry measurements. The embedding of heterometallic Cd(II) and chemical modification of organic protective shells can effectively regulate the PEC water oxidation activity of those clusters, with {F-Cd2Ti10} having the highest turnover number of 518.55 and the highest turnover frequency of 172.85 h-1. Our work highlights the potential of using TOCs that do not contain noble metals as water oxidation catalysts, and their catalytic activity can be regulated by structural modification.
Spurred by the rapid growth of Ru-based complexes as molecular water oxidation catalysts (WOCs), we propose novel ruthenium(II) complexes bearing pyridylpyrrole-carboxylate (H2ppc) ligands as members of the WOC family. The structure of these complexes has 4-picoline (pic)/dimethyl sulfoxide (DMSO) in [Ru(ppc)(pic)2(dmso)] and pic/pic in [Ru(ppc)(pic)3] as axial ligands. Another ppc2- ligand and one pic ligand are located at the equatorial positions. [Ru(ppc)(pic)2(dmso)] behaves as a WOC as determined by electrochemical measurement and has an ultrahigh electrocatalytic current density of 8.17 mA cm-2 at 1.55 V (vs NHE) with a low onset potential of 0.352 V (vs NHE), a turnover number of 241, a turnover frequency of 203.39 s-1, and kcat of 16.34 s-1 under neutral conditions. The H2O/pic exchange of the complexes accompanied by oxidation of a ruthenium center is the initial step in the catalytic cycle. The cyclic voltametric measurements of [Ru(ppc)(pic)2(dmso)] at various scan rates, Pourbaix diagrams (plots of E vs pH), and kinetic studies suggested a water nucleophilic attack mechanism. HPO42- in a phosphate buffer solution is invoked in water oxidation as the proton acceptor.
Interconversion between CO2 + H2 and FA/formate is the most promising strategy for the fixation of carbon dioxide and reversible hydrogen storage; however, FA dehydrogenation and CO2 hydrogenation are usually studied separately using different catalysts for each reaction. This report describes of the catalysis of [Cp*Ir(Nâ§N)(X)]n+ (Cp* = 1,2,3,4,5-pentamethylcyclopentadienyl; X = Cl, n = 0; X = H2O, n = 1) bearing a proton-responsive Nâ§N pyridylpyrrole ligand for both reactions. Complex 2-H2O catalyzes FA dehydrogenation at 90 °C with a TOFmax of 45â¯900 h-1. Its catalysis is more active in aqueous solution than in neat solution under base-free conditions. These complexes also catalyze CO2 hydrogenation in the presence of base to formate under atmospheric pressure (CO2/H2 = 0.05 MPa/0.05 MPa) at 25 °C with a TOF value of 4.5 h-1 in aqueous solution and with a TOF value of 29 h-1 in a methanol/H2O mixture solvent. The possible mechanism is proposed by intermediate characterization and KIE experiments. The extraordinary activity of these complexes are mainly attributed to the metal-ligand cooperative effect of the the pyrrole group to accept a proton in the dehydrogenation of formic acid and assist cooperative heterolytic H-H bond cleavage in CO2 hydrogenation.
Image-guided photodynamic therapy (PDT) has received growing attention due to its non-invasiveness and precise controllability. However, the PDT efficiency of most photosensitizers are decreased in living system due to the aggregation-caused singlet oxygen (1 O2 ) generation decreasing. Herein, we present an Iridium (III) pyridylpyrrole complex (Ir-1) featuring of aggregation-induced emission (AIE) and 1 O2 generation characteristics for image-guided PDT of cancer. Ir-1 aqueous solution exhibits bright red phosphorescence peaked at 630â nm, large Stokes shift of 227â nm, and good 1 O2 generation ability. The 1 O2 generating rate of Ir-1 in EtOH/water mixture solution is 2.3â times higher than that of Rose Bengal. In vitro experimental results revealed that Ir-1 has better biocompatibility and higher phototoxicity compared with clinically used photosensitizers (Rose Bengal and Ce6), suggesting that Ir-1 can serve as a photosensitizer for image-guided PDT of cancer.
Iridium/chemistry , Neoplasms/therapy , Photochemotherapy , Photosensitizing Agents/chemistry , Photosensitizing Agents/pharmacology , Animals , Crystallization , Mice , Models, Molecular , Molecular Structure , Neoplasms, Experimental/therapy
To explore structure-activity relationships with respect to light-harvesting behavior, a family of neutral iridium complexes [Ir(ppy)2(LR)] 1-4 (where ppy = 2-phenylpyridine, and NÌN = 2-(1H-pyrrol-2-yl)pyridine and its functionalized derivatives) were designed and synthesized. The structural modifications in metal complexes are accomplished through the attributions of electron-donating CH3 in 2, OCH3 in 3, and electron-withdrawing CF3 in 4. The structural analysis displays that the pyridylpyrrole acts as one-negative charged bidentated ligand to chelate the iridium center. The electrochemical and photophysical properties of these complexes were systematically studied. The neutral 1-4 as well as the ionic structurally analogous [Ir(ppy)2(bpy)](PF6) (5) were utilized as PSs in photocatalytic hydrogen generation from water with [Co(bpy)3](PF6)2 as catalyst and triethanolamine (TEOA) as electron sacrificial agent in the presence of salt LiCl. Complex 1 maintains activity for more than 144 h under irradiation, and the total turnover number is up to 1768. The electrochemical properties and the quenching reaction indicate the H2 generation by neutral complexes 1-4 is involved exclusively in the oxidative quenching process.
Seven three dimensional (3D) uranyl organic frameworks (UOFs), formulated as [NH4 ][(UO2 )3 (HTTDS)(H2 O)] (1), [(UO2 )4 (HTTDS)2 ](HIM)6 (2, IM=imidazole), [(UO2 )4 (TTDS)(H2 O)2 (Phen)2 ] (3, Phen=1,10-phenanthroline), [Zn(H2 O)4 ]0.5 [(UO2 )3 (HTTDS)(H2 O)4 ] (4), and {(UO2 )2 [Zn(H2 O)3 ]2 (TTDS)} (5), {Zn(UO2 )2 (H2 O)(Dib)0.5 (HDib)(HTTDS)} (6, Dib=1,4-di(1H-imidazol-1-yl)benzene) and [Na]{(UO2 )4 [Cu3 (u3 -OH)(H2 O)7 ](TTDS)2 } (7) have been hydrothermally prepared using a rigid octadentate carboxylate ligand, tetrakis(3,5-dicarboxyphenyl)silicon(H8 TTDS). These UOFs have different 3D self-assembled structures as a function of co-ligands, structure-directing agents and transition metals. The structure of 1 has an infinite ribbon formed by the UO7 pentagonal bipyramid bridged by carboxylate groups. With further introduction of auxiliary N-donor ligands, different structure of 2 and 3 are formed, in 2 the imidazole serves as space filler, while in 3 the Phen are bound to [UO2 ]2+ units as co-ligands. The second metal centers were introduced in the syntheses of 4-7, and in all cases, they are part of the final structures, either as a counterion (4) or as a component of framework (5-7). Interesting, in 7, a rare polyoxometalate [Cu3 (µ3 -OH)O7 (O2 CR)4 ] cluster was found in the structure. It acts as an inorganic building unit together with the dimer [(UO2 )2 (O2 CR)4 ] unit. Those uranyl carboxylates were sufficiently determined by single crystal X-ray diffraction, and their topological structures and luminescence properties were analyzed in detail.
We report here the synthesis of a ferrocene-functionalized {Ti22Fc4} cluster with a 'dimer-of-clusters' topology, which represents the largest Ti-oxo cluster (TOC) modified with organometallic groups ever reported. The exact assembly path of {Ti22Fc4} can be inferred from its two substructures, {Ti11Fc2} and {Ti5Fc}, which can also be synthesized independently through subtle changes in reaction conditions. Furthermore, we used these clusters as photocatalysts, and have studied, for the first time, the photocatalytic activity of TOCs in the oxidative coupling of amines.
