RESUMEN
Background: Drought-resistant varieties are an important way to address the conflict between wheat's high water demand and the scarcity of water resources in the North China Plain (NCP). Drought stress impacts many morphological and physiological indicators in winter wheat. To increase the effectiveness of breeding drought-tolerant varieties, choosing indices that can accurately indicate a variety's drought resistance is advantageous. Results: From 2019 to 2021, 16 representative winter wheat cultivars were cultivated in the field, and 24 traits, including morphological, photosynthetic, physiological, canopy, and yield component traits, were measured to evaluate the drought tolerance of the cultivars. Principal component analysis (PCA) was used to transform 24 conventional traits into 7 independent, comprehensive indices, and 10 drought tolerance indicators were screened out by regression analysis. The 10 drought tolerance indicators were plant height (PH), spike number (SN), spikelet per spike(SP), canopy temperature (CT), leaf water content (LWC), photosynthetic rate (A), intercellular CO2 concentration (Ci), peroxidase activity (POD), malondialdehyde content (MDA), and abscisic acid (ABA). In addition, through membership function and cluster analysis, 16 wheat varieties were divided into 3 categories: drought-resistant, drought weak sensitive, and drought-sensitive. Conclusion: JM418, HM19,SM22, H4399, HG35, and GY2018 exhibited excellent drought tolerance and,therefore, can be used as ideal references to study the drought tolerance mechanism in wheat and breeding drought-tolerant wheat cultivars.
RESUMEN
Maize grain yield is drastically reduced by heat stress (HTS) during anthesis and early grain filling. However, the mechanism of HTS in reproductive organs and kernel numbers remains poorly understood. From 2018 to 2020, two maize varieties (ND372, heat tolerant; and XY335, heat sensitive) and two temperature regimens (HTS, heat stress; and CK, natural control) were evaluated, resulting in four treatments (372CK, 372HTS, 335CK, and 335HTS). HTS was applied from the nine-leaf stage (V9) to the anthesis stage. Various morphological traits and physiological activities of the tassels, anthers, and pollen from the two varieties were evaluated to determine their correlation with kernel count. The results showed that HTS reduced the number of florets, tassel volume, and tassel length, but increased the number of tassel branches. HTS accelerates tassel degradation and reduces pollen weight, quantity, and viability. Deformation and reduction in length and volume due to HTS were observed in both the Nongda 372 (ND372) and Xianyu 335 (XY335) varieties, with the average reductions being 22.9% and 35.2%, respectively. The morphology of the anthers changed more conspicuously in XY335 maize. The number of kernels per spike was reduced in the HTS group compared with the CK group, with the ND372 and XY335 varieties showing reductions of 47.3% and 59.3%, respectively. The main factors underlying the decrease in yield caused by HTS were reductions in pollen quantity and weight, tassel rachis, and branch length. HTS had a greater effect on the anther shape, pollen viability, and phenotype of XY335 than on those of ND372. HTS had a greater impact on anther morphology, pollen viability, and the phenotype of XY335 but had no influence on the appearance or dissemination of pollen from tassel.
RESUMEN
Aiming at the problems of low utilization rate of corn fertilizer, low precision of fertilization ratio, and time-consuming and laborious topdressing in the later stage, an U-shaped fertilization device with uniform fertilizer mechanism was designed. The device was mainly composed of uniform fertilizer mixing mechanism, fertilizer guide plate and fertilization plate. Compound fertilizer was applied on both sides and slow/controlled release fertilizer was applied at the bottom to form an U-shaped distribution of fertilizer around corn seeds. Through theoretical analysis and calculation, the structural parameters of the fertilization device were determined. Through the simulated soil tank test, the quadratic regression orthogonal rotation combination design was carried out on the main factors affecting the spatial stratification effect of fertilizer. The optimal parameters were obtained as follows: the stirring speed of the stirring structure was 300 r/min, the bending angle of the fertilization tube was 165°, and the operating speed of the fertilization device was 3 km/h. The results of bench verification test showed that under the optimized stirring speed and bending angle, the fertilizer particles were stirred evenly, and the average values of fertilizer flowing out of the fertilization tubes on both sides were 299.5 g and 297.4 g, respectively. The average fertilizer amounts of the three fertilizer outlets were 200.4 g, 203.2 g and 197.7 g, respectively, which met the agronomic requirements of 1:1:1 fertilization, and the variation coefficients of fertilizer amounts on both sides of the fertilizer pipe and each layer were less than 0.1% and 0.4%, respectively. The simulation results of the optimized U-shaped fertilization device can achieve the expected U-shaped fertilization effect around corn seeds. The results of field experiment showed that the U-shaped fertilization device could realize the U-shaped proportional application of fertilizer in soil. The distance between the upper end of fertilization on both sides and the distance between the base fertilizer and the surface were 87.3-95.2 mm and 197.8-206.0 mm, respectively. The transverse distance between the fertilizers on both sides was 84.3-99.4 mm, and the error with the designed theoretical fertilization was within 10 mm. Compared with the traditional side fertilization method, the number of corn roots increased by 5-6, the root length increased by 30-40 mm, and the yield increased by 9.9-14.8%.
RESUMEN
As an important type of interplant competition, line-spacing shrinkage and row-spacing expansion (LSRE) can increase the number of tillers and improve resource utilization efficiency in wheat. Wheat tillering is closely related to various phytohormones. However, it is unclear whether LSRE regulates phytohormones and their relationship to tillering and wheat yield. This study evaluated tillering characteristics, phytohormone content in tiller nodes at the pre-winter stage, and grain yield factors for the winter wheat variety Malan1. We used a two-factor randomized block trial design with two sowing spacings of 15 cm (15RS, conventional treatment) and 7.5 cm (7.5RS, LSRE treatment) at the same density and three sowing-date groups (SD1, SD2, and SD3). LSRE significantly promoted wheat tillering and biomass at the pre-winter stage (average increases of 14.5% and 20.9% in the three sowing-date groups, respectively) and shortened the accumulated temperature required for a single tiller. Changes in the levels of phytohormones, including decreased gibberellin and indole acetic acid and increased zeatin riboside and strigolactones, were determined by high-performance liquid chromatography and were shown to be responsible for the tillering process under LSRE treatment in winter wheat. LSRE treatment can improve crop yield by increasing the number of spikes per unit area and grain weight. Our results clarified the changes in tillering and phytohormones content of winter wheat under LSRE treatment and their correlation with grain yield. This study also provides insights into the physiological mechanisms of alleviating inter-plant competition to improve crop yield.
RESUMEN
Investigating starch properties of different adzuki beans provides an important theoretical basis for its application. A comparative study was conducted to evaluate the starch content, processing, digestion, and structural quality of 12 adzuki bean varieties. The variation ranges of the 12 adzuki bean varieties with specific analyzed parameters, including the amylose/amylopectin (AM/AP) ratio, bean paste rate, water separation rate, solubility, swelling power and resistant starch (RS) content level, were 5.52-39.05%, 44.7-68.2%, 45.56-54.29%, 6.79-12.07%, 11.83-15.39%, and 2.02-14.634%, respectively. The crystallinity varied from 20.92 to 37.38%, belonging to type BC(The starch crystal type is mainly type C, supplemented by type B). In correlation analysis, red and blue represent positive and negative correlation, respectively. Correlation analysis indicated that the termination temperature of adzuki bean starch was positively correlated with AM/AP ratio. Therefore, the higher the melting temperature, the better the freeze-thaw stability. The 12 varieties were divided into Class I, Class II, and Class III by cluster analysis, based on application field. Class I was unsuitable for the diabetics' diet; Class II was suitable for a stabilizer; and Class III was suitable for bean paste, mixtures, and thickeners. The present study could provide a theoretical basis for their application in the nutritional and nutraceutical field.
RESUMEN
[This corrects the article DOI: 10.1021/acsomega.2c01273.].
RESUMEN
Water scarcity is a key constraint to crop production in North China Plain (NCP), which produces the majority of the country's winter wheat (Triticum aestivum L.). The objective of this three-year field study was to see whether and when irrigation one-time in spring improved grain productivity and water use efficiency. Four sets of irrigation were established at the 3-leaf visible stage (L3) and the L4, L5, and L6 stages. When irrigation time was postponed, the spike number, 1000-grain weight, and water consumption increased progressively, whereas grain yield, grain number, dry matter, harvest, and WUE grew, then dropped, and peaked at L4. The increased grain number can be attributed to the L4's higher daily water consumption and water consumption percentage throughout the jointing-anthesis stages compared to the L3, L5, and L6. The cumulative (37 days), whereas it was longer in L3, L5, and L6(40, 42, and 43 days, respectively). Furthermore, flag leaf senescence was postponed in L4 with a higher post-anthesis leaf area index, photosynthetic rate, chlorophyll content, higher superoxide dismutase activity, and lower malondialdehyde concentration. As a result, single irrigation at the 4-leaf visible stage optimized water deficit and consumption before and after anthesis, resulting in higher yield and WUE in the NCP.
Asunto(s)
Triticum , Agua , Riego Agrícola/métodos , Biomasa , Ingestión de Líquidos , Grano ComestibleRESUMEN
The flowering characteristics of adzuki bean are influenced by several environmental factors. Light is an important ecological factor that induces flowering in adzuki bean, but to date, there have been few reports on the transcriptomic features of photoperiodic regulation of adzuki bean flowering. This study is based on RNA sequencing (RNA-seq) techniques to elucidate the expression of light-related regulatory genes under short-day photoperiod inducement of adzuki bean flowering, providing an important theoretical basis for its accelerated breeding. Short-day photoperiod inducement of 10 h was conducted for 5 day, 10 day, and 15 day periods on "Tang shan hong xiao dou" varieties, which are more sensitive to short-day photoperiod conditions than the other varieties. Plants grown under natural light (14.5 h) for 5 days, 10 days, and 15 days were used as controls to compare the progress of flower bud differentiation and flowering characteristics. The topmost unfolded functional leaves were selected for transcriptome sequencing and bioinformatics analysis. The short-day photoperiod inducement promoted flower bud differentiation and advanced flowering time in adzuki bean. Transcriptomic analysis revealed 5,608 differentially expressed genes (DEGs) for the combination of CK-5d vs. SD-5d, CK-10d vs. SD-10d, and CK-15d vs. SD-15d. The three groups of the DEGs were analyzed using the Gene Ontology (GO) and the Kyoto Encyclopedia of Genomes and Genomes (KEGG) databases; the DEGs were associated with flowering, photosystem, and the circadian rhythm and were mainly concentrated in the hormone signaling and metabolism, circadian rhythm, and antenna protein pathways; So, 13 light-related genes across the three pathways were screened for differential and expression characteristics. Through the functional annotations of orthologs, these genes were related to flowering, which were supposed to be good candidate genes in adzuki bean. The findings provide a deep understanding of the molecular mechanisms of adzuki bean flowering in response to short-day photoperiod inducement, which laid a foundation for the functional verification of genes in the next step, and provide an important reference for the molecular breeding of adzuki bean.
RESUMEN
In this study, a spatially stratified proportional fertilizer application device was designed, which was mainly composed of a fertilizer equalization and stirring structure, fertilizer guide plate, and fertilizer plate. This was aimed at solving challenges presented by current fertilizer devices that include a poor layering effect due to untimely return of soil, excess nutrients in the early stages of plant growth, and insufficient quantities in the later stages. The "seed fertilizer + chasing fertilizer" is time-consuming and laborious; seed and fertilizer (without layering) are applied to the soil at once, which tends to cause too much nutrients for plants in the early stage and not enough nutrients in the later stage; and the layered fertilizer machines currently on the market have a poor layering effect due to untimely soil return. Through theoretical analysis and calculation, the structural parameters of the device were determined, and the main influencing factors of the movement law of fertilizer in the device were analyzed. Through simulating soil tank tests, the main factors affecting the effect of fertilizer spatial stratification were designed by quadratic regression orthogonal rotation combination designs. The optimal parameters including the length of the first fertilizer plate was 100 mm, the installation angle of the fertilizer plate was 80°, the spacing of the fertilizer port was 30 mm, and the uniform stirring speed was 650 r/min. The results of the bench test showed that the fertilizer granules could be uniformly stirred at the optimized stirring speed, with average values of 74.56, 76.56, and 105.19 g, which met the agronomic fertilizer application requirements, and the coefficient of variation of fertilizer application amount in each layer was less than 1%. The field test results showed that the stratified proportional fertilizer application device could achieve the stratified proportional application of fertilizer in the soil in ranges of 80.2-95.4, 150.3-180.2, and 230.3-250.4 mm for the upper, middle, and lower layers, respectively, with an error within 10 mm from the designed theoretical application depth. Compared with the conventional fertilizer application method, this fertilizer application method had a more obvious promotion effect on the 100-grain weight and yield of corn.