RESUMEN
Stackable select devices such as the oxide p-n junction diode and the Schottky diode (one-way switch) have been proposed for non-volatile unipolar resistive switching devices; however, bidirectional select devices (or two-way switch) need to be developed for bipolar resistive switching devices. Here we report on a fully stackable switching device that solves several problems including current density, temperature stability, cycling endurance and cycle distribution. We demonstrate that the threshold switching device based on As-Ge-Te-Si material significantly improves cycling endurance performance by reactive nitrogen deposition and nitrogen plasma hardening. Formation of the thin Si3N4 glass layer by the plasma treatment retards tellurium diffusion during cycling. Scalability of threshold switching devices is measured down to 30 nm scale with extremely fast switching speed of ~2 ns.
RESUMEN
The rectifying Schottky characteristics of the metal-semiconductor junction with high contact resistance have been a serious issue in modern electronic devices. Herein, we demonstrated the conversion of the Schottky nature of the Ni-Si junction, one of the most commonly used metal-semiconductor junctions, into an Ohmic contact with low contact resistance by inserting a single layer of graphene. The contact resistance achieved from the junction incorporating graphene was about 10(-8) ~ 10(-9) Ω cm(2) at a Si doping concentration of 10(17) cm(-3).
RESUMEN
Tantalum-oxide-based bi-layered resistance-change memories (RRAMs) have recently improved greatly with regard to their memory performances. The formation and rupture of conductive filaments is generally known to be the mechanism that underlies resistive switching. The nature of the filament has been studied intensively and several phenomenological models have consistently predicted the resistance-change behavior. However, a physics-based model that describes a complete bi-layered RRAM structure has not yet been demonstrated. Here, a complete electro-thermal resistive switching model based on the finite element method is proposed. The migration of oxygen vacancies is simulated by the local temperature and electric field derived from carrier continuity and heat equations fully coupled in a 3-D geometry, which considers a complete bi-layered structure that includes the top and bottom electrodes. The proposed model accurately accounts for the set/reset characteristics, which provides an in-depth understanding of the nature of resistive switching.
Asunto(s)
Equipos de Almacenamiento de Computador , Electrónica/instrumentación , Modelos Teóricos , Procesamiento de Señales Asistido por Computador/instrumentación , Simulación por Computador , Impedancia Eléctrica , Diseño de Equipo , Análisis de Falla de EquipoRESUMEN
Despite several years of research into graphene electronics, sufficient on/off current ratio I(on)/I(off) in graphene transistors with conventional device structures has been impossible to obtain. We report on a three-terminal active device, a graphene variable-barrier "barristor" (GB), in which the key is an atomically sharp interface between graphene and hydrogenated silicon. Large modulation on the device current (on/off ratio of 10(5)) is achieved by adjusting the gate voltage to control the graphene-silicon Schottky barrier. The absence of Fermi-level pinning at the interface allows the barrier's height to be tuned to 0.2 electron volt by adjusting graphene's work function, which results in large shifts of diode threshold voltages. Fabricating GBs on respective 150-mm wafers and combining complementary p- and n-type GBs, we demonstrate inverter and half-adder logic circuits.
RESUMEN
Present charge-based silicon memories are unlikely to reach terabit densities because of scaling limits. As the feature size of memory shrinks to just tens of nanometers, there is insufficient volume available to store charge. Also, process temperatures higher than 800 °C make silicon incompatible with three-dimensional (3D) stacking structures. Here we present a device unit consisting of all NiO storage and switch elements for multilevel terabit nonvolatile random access memory using resistance switching. It is demonstrated that NiO films are scalable to around 30 nm and compatible with multilevel cell technology. The device unit can be a building block for 3D stacking structure because of its simple structure and constituent, high performance, and process temperature lower than 300 °C. Memory resistance switching of NiO storage element is accompanied by an increase in density of grain boundary while threshold resistance switching of NiO switch element is controlled by current flowing through NiO film.
RESUMEN
Numerous candidates attempting to replace Si-based flash memory have failed for a variety of reasons over the years. Oxide-based resistance memory and the related memristor have succeeded in surpassing the specifications for a number of device requirements. However, a material or device structure that satisfies high-density, switching-speed, endurance, retention and most importantly power-consumption criteria has yet to be announced. In this work we demonstrate a TaO(x)-based asymmetric passive switching device with which we were able to localize resistance switching and satisfy all aforementioned requirements. In particular, the reduction of switching current drastically reduces power consumption and results in extreme cycling endurances of over 10(12). Along with the 10 ns switching times, this allows for possible applications to the working-memory space as well. Furthermore, by combining two such devices each with an intrinsic Schottky barrier we eliminate any need for a discrete transistor or diode in solving issues of stray leakage current paths in high-density crossbar arrays.
RESUMEN
The fabrication of controlled nanostructures such as quantum dots, nanotubes, nanowires, and nanopillars has progressed rapidly over the past 10 years. However, both bottom-up and top-down methods to integrate the nanostructures are met with several challenges. For practical applications with the high level of the integration, an approach that can fabricate the required structures locally is desirable. In addition, the electrical signal to construct and control the nanostructures can provide significant advantages toward the stability and ordering. Through experiments on the negative resistance switching phenomenon in Pt-NiO-Pt structures, we have fabricated nanofilament channels that can be electrically connected or disconnected. Various analyses indicate that the nanofilaments are made of nickel and are formed at the grain boundaries. The scaling behaviors of the nickel nanofilaments were closely examined, with respect to the switching time, power, and resistance. In particular, the 100 nm x 100 nm cell was switchable on the nanosecond scale, making them ideal for the basis for high-speed, high-density, nonvolatile memory applications.