RESUMEN
Cost-effective and environmentally friendly Fe-based active materials offer exceptionally high energy capacity in lithium-ion batteries (LIBs) due to their multiple electron redox reactions. However, challenges, such as morphology degradation during cycling, cell pulverization, and electrochemical stability, have hindered their widespread use. Herein, we demonstrated a simple salt-assisted freeze-drying method to design a double-shelled Fe/Fe3C core tightly anchored on a porous carbon framework (FEC). The shell consists of a thin Fe3O4 layer (≈2 nm) and a carbon layer (≈10 nm) on the outermost part. Benefiting from the complex nanostructuring (porous carbon support, core-shell nanoparticles, and Fe3C incorporation), the FEC anode delivered a high discharge capacity of 947 mAh g-1 at 50 mA g-1 and a fast-rate capability of 305 mAh g-1 at 10 A g-1. Notably, the FEC cell still showed 86% reversible capacity retention (794 mAh g-1 at 50 mA g-1) at a high cycling temperature of 80 °C, indicating superior structural integrity during cycling at extreme temperatures. Furthermore, we conducted a simple solid-state fluorination technique using the as-prepared FEC sample and excess NH4F to prepare iron fluoride-carbon composites (FeF2/C) as the positive electrode. The full cell configuration, consisting of the FEC anode and FeF2/C cathode, reached a remarkable capacity of 200 mAh g-1 at a 20 mA g-1 rate or an energy density of approximately 530 Wh kg-1. Thus, the straightforward and simple experimental design holds great potential as a revolutionary Fe-based cathodic-anodic pair candidate for high-energy LIBs.
RESUMEN
In this study, an air bubbling electroless plating (ELP) method was newly developed for the production of Pd composite membranes. The air bubble ELP alleviated the concentration polarization of Pd ions, making it possible to achieve a plating yield of 99.9% in 1 h and form very fine Pd grains with a uniform layer of â¼4.7 µm. A membrane with a diameter of 25.4 mm and a length of 450 mm was produced by the air bubbling ELP, achieving a hydrogen permeation flux of 4.0 × 10-1 mol m-2 s-1 and selectivity of â¼10 000 at 723 K with a pressure difference of 100 kPa. To confirm the reproducibility, six membranes were produced by the same method and assembled in a membrane reactor module to produce high-purity hydrogen by ammonia decomposition. Hydrogen permeation flux and selectivity of the six membranes at 723 K with a pressure difference of 100 kPa were 3.6 × 10-1 mol m-2 s-1 and â¼8900, respectively. An ammonia decomposition test with an ammonia feed rate of 12 000 mL min-1 showed that the membrane reactor produced hydrogen with >99.999% purity and a production rate of 1.01 Nm3 h-1 at 748 K with a retentate stream gauge pressure of 150 kPa and a permeation stream vacuum of -10 kPa. The ammonia decomposition tests confirmed that the newly developed air bubbling ELP method affords several advantages, such as rapid production, high ELP efficiency, reproducibility, and practical applicability.
RESUMEN
As the prices of photovoltaics and wind turbines continue to decrease, more renewable electricity-generating capacity is installed globally. While this is considered an integral part of a sustainable energy future by many nations, it also poses a significant strain on current electricity grids due to the inherent output variability of renewable electricity. This work addresses the challenge of renewable electricity surplus (RES) utilization with target-scaling of centralized power-to-gas (PtG) hydrogen production. Using the Republic of Korea as a case study, due to its ambitious plan of 2030 green hydrogen production capacity of 0.97 million tons year-1, we combine predictions of future, season-averaged RES with a detailed conceptual process simulation for green H2 production via polymer electrolyte membrane (PEM) electrolysis combined with a desalination plant in six distinct scale cases (0.5-8.5 GW). It is demonstrated that at scales of 0.5 to 1.75 GW the RES is optimally utilized, and PtG hydrogen can therefore outperform conventional hydrogen production both environmentally (650-2210 Mton CO2 not emitted per year) and economically (16-30% levelized cost reduction). Beyond these scales, the PtG benefits sharply drop, and thus it is answered how much of the planned green hydrogen target can realistically be "green" if produced domestically on an industrial scale.
Asunto(s)
Dióxido de Carbono , Hidrógeno , Electricidad , Polímeros , Energía RenovableRESUMEN
The electrochemical synthesis of ammonia at ambient temperature and pressure has the potential to replace the conventional process for the production of ammonia. However, the low ammonia yield and poor long-term stability of catalysts for the synthesis of ammonia hinders the application of this technology. Herein, we endeavored to tackle this challenge by synthesizing 3-D vertical graphene (VG) on Ni foam via a one-step, low-temperature plasma process, which offered high conductivity and large surface area. Subsequently, the vertical graphene on Ni foam was loaded with nanolayers of ruthenium oxide (RuO2, â¼2 nm) and cerium oxide (CeO2, <20 nm) nanoparticles via magnetron sputtering. The incorporation of nanoparticle layers (RuO2 and CeO2/RuO2) on VG significantly increased the NH3 yield in KOH electrolyte. Finally, the performance and long-term stability of this composite material were successfully demonstrated by the addition of CeO2/RuO2 nanolayers on the VG electrocatalyst. The catalyst achieved an excellent performance with a high ammonia synthesis yield of 50.56 µg mgtotal cat.-1 h-1 (1.11 × 10-10 mol cm-2 s-1) during the performance evaluation period of 36 h. This observation was also verified by density functional theory calculation, where CeO2 exhibited the best catalytic performance compared to RuO2 and pristine graphene.
RESUMEN
Cost-effective and nonprecious iron-based catalysts were synthesized, evaluated, and compared for electrocatalytic N2 reduction reaction (NRR) under alkaline conditions in the potential range from -0.4 to 0.1 V [vs reversible hydrogen electrode (RHE)] at low temperature (≤60 °C) and atmospheric pressure. The tested H-type cell was separated by an anion exchange membrane in 6 M KOH alkaline electrolyte (pH = over 14) in order to minimize hydrogen evolution reaction and to directly form NH3 gas. The amount of ammonia synthesized was quantified using an indophenol blue method and cross-checked with 1H nuclear magnetic resonance spectroscopy and ion chromatography using both 14N2 and 15N2 gases. Because of the synergistic effect between the Fe3C, Fe2O3, and Fe composites in the NRR, both the ammonia formation rate and faradaic efficiency in Fe3C/Fe2O3/Fe/C were approximately fourfold higher than those in Fe2O3/C at 60 °C and 0.1 V (vs RHE). These results can provide insights into designing Fe-based electrocatalysts for NRR at atmospheric pressure.
RESUMEN
Lithium-mediated reduction of dinitrogen is a promising method to evade electron-stealing hydrogen evolution, a critical challenge which limits faradaic efficiency (FE) and thus hinders the success of traditional protic-solvent-based ammonia electro-synthesis. A viable implementation of the lithium-mediated pathway using lithium-ion conducting glass ceramics involves i)â lithium deposition, ii)â nitridation, and iii)â ammonia formation. Ammonia was successfully synthesized from molecular nitrogen and water, yielding a maximum FE of 52.3 %. With an ammonia synthesis rate comparable to previously reported approaches, the fairly high FE demonstrates the possibility of using this nitrogen fixation strategy as a substitute for firmly established, yet exceedingly complicated and expensive technology, and in so doing represents a next-generation energy storage system.