Graph Network-Based Simulation of Multicellular Dynamics Driven by Concentrated Polymer Brush-Modified Cellulose Nanofibers.

Manipulating the three-dimensional (3D) structures of cells is important for facilitating to repair or regenerate tissues. A self-assembly system of cells with cellulose nanofibers (CNFs) and concentrated polymer brushes (CPBs) has been developed to fabricate various cell 3D structures. To further generate tissues at an implantable level, it is necessary to carry out a large number of experiments using different cell culture conditions and material properties; however this is practically intractable. To address this issue, we present a graph-neural network-based simulator (GNS) that can be trained by using assembly process images to predict the assembly status of future time steps. A total of 24 (25 steps) time-series images were recorded (four repeats for each of six different conditions), and each image was transformed into a graph by regarding the cells as nodes and the connecting neighboring cells as edges. Using the obtained data, the performances of the GNS were examined under three scenarios (i.e., changing a pair of the training and testing data) to verify the possibility of using the GNS as a predictor for further time steps. It was confirmed that the GNS could reasonably reproduce the assembly process, even under the toughest scenario, in which the experimental conditions differed between the training and testing data. Practically, this means that the GNS trained by the first 24 h images could predict the cell types obtained 3 weeks later. This result could reduce the number of experiments required to find the optimal conditions for generating cells with desired 3D structures. Ultimately, our approach could accelerate progress in regenerative medicine.

Efficient genome editing by controlled release of Cas9 ribonucleoprotein in plant cytosol using polymer-modified microneedle array.

Direct delivery of genome-editing proteins into plant tissues could be useful in obtaining DNA-free genome-edited crops obviating the need for backcrossing to remove vector-derived DNA from the host genome as in the case of genetically modified organisms generated using DNA vector. Previously, we successfully delivered Cas9 ribonucleoprotein (RNP) into plant tissue by inserting microneedle array (MNA) physisorbed with Cas9 RNPs. Here, to enhance protein delivery and improve genome-editing efficiency, we introduced a bioactive polymer DMA/HPA/NHS modification to the MNA, which allowed strong bonding between the proteins and MNA. Compared with other modifying agents, this MNA modification resulted in better release of immobilized protein in a plant cytosol-mimicking environment. The delivery of Cas9 RNPs in Arabidopsis thaliana reporter plants was improved from 4 out of 17 leaf tissues when using unmodified MNAs to 9 out of 17 when using the polymer-modified MNAs. Further improvements in delivery efficiency can be envisaged by optimizing the polymer modification conditions, which could have significant implications for the development of more effective plant genome editing techniques.

Influence of the Charge Ratio of Guanine-Quadruplex Structure-Based CpG Oligodeoxynucleotides and Cationic DOTAP Liposomes on Cytokine Induction Profiles.

Cationic liposomes, specifically 1,2-dioleoyl-3-trimethylammonium-propane (DOTAP) liposomes, serve as successful carriers for guanine-quadruplex (G4) structure-based cytosine-guanine oligodeoxynucleotides (CpG ODNs). The combined benefits of CpG ODNs forming a G4 structure and a non-viral vector carrier endow the ensuing complex with promising adjuvant properties. Although G4-CpG ODN-DOTAP complexes show a higher immunostimulatory effect than naked G4-CpG ODNs, the effects of the complex composition, especially charge ratios, on the production of the pro-inflammatory cytokines interleukin (IL)-6 and interferon (IFN)-α remain unclear. Here, we examined whether charge ratios drive the bifurcation of cytokine inductions in human peripheral blood mononuclear cells. Linear CpG ODN-DOTAP liposome complexes formed micrometer-sized positively charged agglomerates; G4-CpG ODN-DOTAP liposome complexes with low charge ratios (0.5 and 1.5) formed ~250 nm-sized negatively charged complexes. Notably, low-charge-ratio (0.5 and 1.5) complexes induced significantly higher IL-6 and IFN-α levels simultaneously than high-charge-ratio (2 and 2.5) complexes. Moreover, confocal microscopy indicated a positive correlation between the cellular uptake of the complex and amount of cytokine induced. The observed effects of charge ratios on complex size, surface charge, and affinity for factors that modify cellular-uptake, intracellular-activity, and cytokine-production efficiency highlight the importance of a rational complex design for delivering and controlling G4-CpG ODN activity.

Antagonist of transient receptor potential melastatin 2 suppresses mechanical hypersensitivity and activation of microglia induced by infraorbital nerve ligation in male rats.

Activation of microglia is known to be involved in neuropathic pain. However, the pathway that regulates the microglial activation is not completely understood. Transient receptor potential (TRP) melastatin 2 (TRPM2), which is part of the TRP superfamily, is reportedly expressed on microglia and is suggested to be involved in neuropathic pain. To explore the effect of a TRPM2 antagonist on orofacial neuropathic pain and the relationship between TRPM2 and the activation of microglia, experiments were conducted using male rats that underwent infraorbital nerve (ION) ligation as orofacial neuropathic pain models. TRPM2 expression was detected on microglia in the trigeminal spinal subnucleus caudalis (Vc). The immunoreactivity of TRPM2 in the Vc increased after ION ligation. Mechanical threshold for head-withdrawal response was measured using von Frey filament, and it decreased after ION ligation. When the TRPM2 antagonist was administered to the ION-ligated rats, the low mechanical threshold for head-withdrawal response increased, and the number of phosphorylated extracellular signal-regulated kinase (pERK)-immunoreactive cells in the Vc decreased. The number of CD68-immunoreactive cells in the Vc also decreased after the administration of the TRPM2 antagonist in the ION-ligated rats. These findings suggest that TRPM2 antagonist administration suppresses hypersensitivity to mechanical stimulation induced by ION ligation and microglial activation, and TRPM2 is also involved in microglial activation in orofacial neuropathic pain.

Non-Modified CpG Oligodeoxynucleotide Forming Guanine-Quadruplex Structure Complexes with ε-Poly-L-Lysine Induce Antibody Production as Vaccine Adjuvants.

Unmethylated cytosine-phosphate-guanosine oligodeoxynucleotides (CpG ODNs) induce inflammatory cytokines and type I interferons (IFNs) to activate the immune system. To apply CpG ODNs as vaccine adjuvants, the cellular uptake and stability of phosphodiester-based, non-modified ODNs require further improvement. Previously developed new CpG ODNs forming guanine-quadruplex (G4) structures showed higher nuclease resistance and cellular uptake than linear CpG ODNs; however, the complex formation of G4-CpG ODNs with antigen proteins is necessary for their application as vaccine adjuvants. In this study, we utilized a cationic polymer, ε-poly-L-lysine (ε-PLL), as a carrier for G4-CpG ODNs and antigen. The ε-PLL/G4-CpG ODN complex exhibited enhanced stability against nucleases. Cellular uptake of the ε-PLL/G4-CpG ODN complex positively correlated with the N/P ratio. In comparison to naked G4-CpG ODNs, the ε-PLL/G4-CpG ODN complex induced extremely high levels of interleukin (IL)-6, IL-12, and IFN-ß. Relative immune cytokine production was successfully tuned by N/P ratio modification. Mice with the ε-PLL/G4-CpG ODN/ovalbumin (OVA) complex showed increased OVA-specific immunoglobulin (Ig)G, IgG1, and IgG2c levels, whereas total IgE levels did not increase and weight gain rates were not affected. Therefore, ε-PLL can serve as a safe and effective phosphodiester-based, non-modified CpG ODN delivery system, and the ε-PLL/G4-CpG ODN/antigen complex is a highly promising candidate for vaccine adjuvants and can be further used in clinical research.

Cellular Flocculation Driven by Concentrated Polymer Brush-Modified Cellulose Nanofibers with Different Surface Charges.

This study examined the effect of the surface charge of concentrated polymer brush (CPB)-grafted cellulose nanofibers (CNFs) on HepG2 cell flocculation. Four polyelectrolytes, poly(p-styrenesulfonic acid sodium salt) (PSSNa), poly(acrylic acid) (PAA), poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA), and poly([(2-methacryloyloxy)ethyl]trimethylammonium chloride) (PMTAC), were grafted onto the CNF surface via surface-initiated atom transfer radical polymerization to form CNF-CPBs. The floc size of HepG2 cells depended on the surface charge of CNF-CPBs, where the anionic CNF-PSSNa formed larger flocs than CNF-PAA; due to the electrostatic repulsive forces, CNF-CPBs with a lower ζ-potential yielded smaller floc sizes. Contrastingly, the cytotoxic cationic CNF-PDMAEMA and CNF-PMTAC limited the floc size growth. Thus, appropriate electrostatic interactions are essential for floc formation and improved cell function in three-dimensional (3D) cell culture systems. Interestingly, while developing a novel 3D cell culture system, we reveal that colloidal flocculation theory is the driving mechanism behind this unique phenomenon.

Marine Antifouling Coatings Based on Durable Bottlebrush Polymers.

We report a next-generation, biocide-free, and durable marine antifouling coating technology. To achieve this, we combined two different polymers previously developed by us. First, we synthesized well-defined 2-hydroxypropyl acrylamide (HPA) based bottlebrush polymers with concentrated polymer brush (CPB) structures, which exhibit excellent bioinertness, and second, we synthesized photoreactive copolymers of 2-hydroxypropyl acrylamide (HPA) and N-benzophenone acrylamide (BPA), which can be cross-linked by exposure to sunlight for 30 min. Simply mixing the bottlebrush polymers with the photoreactive copolymers and applying these as a coating provided a scalable method for achieving effective antifouling properties in one step on a broad range of polymer substrate materials. The resistance of bottlebrushes against acid and base hydrolysis was demonstrated in accelerated degradation experiments at 80 °C, and the coating thickness was found to be stable after 3 months of incubation in sea water. Optimized coatings prevented cypris larva attachment for up to 9 days and prevented the settling of marine organisms in the sea for up to 73 days. Due to the ease of application, long-term durability, and effective antifouling performance, our bottlebrush coating technology is expected to be exploited in biocide-free marine paints.

Cerebroventricular administration of anti-calcitonin gene-related peptide antibody reduces the increase of dopamine D2 receptor observed in the trigeminal spinal subnucleus caudalis following infraorbital nerve ligation.

A dopamine D2 receptor (D2R) agonist and an anti-calcitonin gene-related peptide (CGRP) antibody were separately reported to reduce neuropathic pain. To further attenuate neuropathic pain, co-administration of a D2R agonist and an anti-CGRP antibody was performed in a rat with the infraorbital nerve (ION) ligation. However, this co-administration showed no further attenuation of mechanical hypersensitivity compared to the administration of anti-CGRP antibody alone. Our results also revealed that D2R immunoreactivity in the trigeminal spinal subnucleus caudalis (Vc) increased following the nerve ligation and decreased following administration of an anti-CGRP antibody. The ratio of immunoreactive neurons of phosphorylated cyclic adenosine monophosphate-response-element-binding protein in the Vc also increased following nerve ligation and decreased with the anti-CGRP antibody. Our results suggest that a decrease in D2R immunoreactivity reduces the effect of a D2R agonist, and transcription of D2R is activated following the ION ligation and suppressed by treatment with an anti-CGRP antibody.

Cellular Flocculation Using Concentrated Polymer Brush-Modified Cellulose Nanofibers with Different Fiber Lengths.

In this study, concentrated polymer brush-modified cellulose nanofibers (CNFs) with different fiber lengths were used for the flocculation of cells for systematically studying the mechanism of this unique cellular flocculation based on colloidal flocculation theory. Concentrated poly(p-styrenesulfonic acid sodium salt) brush-grafted CNF (CNF-PSSNa) with different fiber lengths were cultured with three different cell types to examine their influence on floc (cell clusters formed by cellular flocculation) characteristics. The floc size and survival rate could be controlled by modifying the CNF-PSSNa fiber lengths. The three cell types showed the same flocculation tendency after culture, indicating the applicability of the method in different cell lines. After 2 weeks of culture, CNF-PSSNa increased the specific expression of hepatocytes compared to the two-dimensional cell culture. Thus, owing to its wide applicability, high cell viability, and ability to control cell size and improve cell function, this technology could be used as a new three-dimensional cell culture method.

Concentrated polymer brush-modified cellulose nanofibers promote chondrogenic differentiation of human mesenchymal stem cells by controlling self-assembly.

In order to develop new three-dimensional (3D) cell culture systems for articular cartilage regeneration, concentrated poly(styrene sulfonate sodium salt) brush-modified cellulose nanofibers were employed as building blocks for the self-assembly of human mesenchymal stem cells (hMSCs). Unique 3D cellular structures, such as giant spheres and sheets, were formed by controlling hMSC self-assembly.

Anti-calcitonin gene-related peptide antibody attenuates orofacial mechanical and heat hypersensitivities induced by infraorbital nerve injury.

Currently, limited information regarding the role of calcitonin gene-related peptide (CGRP) in neuropathic pain is available. Intracerebroventricular administrations of an anti-CGRP antibody were performed in rats with infraorbital nerve ligation. Anti-CGRP antibody administration attenuated mechanical and heat hypersensitivities induced by nerve ligation and decreased the phosphorylated extracellular signal-regulated kinase expression levels in the trigeminal spinal subnucleus caudalis (Vc) following mechanical or heat stimulation. An increased CGRP immunoreactivity in the Vc appeared after nerve ligation. A decreased CGRP immunoreactivity resulted from anti-CGRP antibody administration. Our findings suggest that anti-CGRP antibody administration attenuates the symptoms of trigeminal neuropathic pain by acting on CGRP in the Vc.

In vitro and in vivo blood compatibility of concentrated polymer brushes.

Concentrated polymer brushes (CPBs) and semi-dilute polymer brushes (SDPBs) of poly(2-hydroxyethyl methacrylate), poly(2-hydroxyethyl acrylate), poly[poly(ethylene glycol)methyl ether methacrylate] (PPEGMA) and poly(2-methoxyetyl acrylate) were prepared on silica particles and silicon wafers by surface-initiated atom transfer radical polymerization (SI-ATRP). In order to evaluate in vitro blood compatibility, plasma protein adsorption on the brushes was quantified with a BCA protein assay, and the adsorbed proteins on the brushes were identified using high-performance liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS). All four CPBs displayed much less protein adsorption than their corresponding SDPBs. Interestingly, the number and type of identified proteins differed on the brushes. Platelet adhesion was then examined on the brushes, whereby CPBs suppressed platelet adhesion to a greater extent than the corresponding SDPBs, although platelet activation was observed on all surfaces. As a result, the CPBs of PPEGMA prevented platelet adhesion the most. After screening the polymers by in vitro evaluation, CPBs of PPEGMA were then grafted on a catheter by SI-ATRP. The catheter with the CPBs was implanted into the jugular vein of a rabbit. The in vivo assessment after three weeks of implantation confirmed that the CPBs caused little coagulation or inflammation, whereas the pristine catheter exhibited inflammation and encapsulation.

Nonbiofouling Coatings Using Bottlebrushes with Concentrated Polymer Brush Architecture.

Concentrated polymer brushes (CPBs) are known to suppress biofouling phenomena, such as protein adsorption and cell adhesion. However, a cumbersome process is needed for their synthesis. Here, we report a simple and versatile method for fabricating nonbiofouling coatings that uses well-defined bottlebrushes instead of CPBs. First, a macroinitiator, poly[2-(2-bromoisobutyryloxy)ethyl methacrylate] (PBIEM), was synthesized by reversible addition-fragmentation chain transfer polymerization. Then, poly[poly(ethylene glycol) methyl ether methacrylate] was grafted from PBIEM through atom transfer radical polymerization to form well-defined bottlebrushes. By controlling the graft chain length, two types of bottlebrushes could be prepared, namely those with a semi-dilute polymer brush (SDPB) structure or a CPB structure on the surface of the outermost layer. Crosslinked films of the bottlebrushes were prepared on silicon wafers by spin-coating and subsequent radical coupling. Importantly, the CPB-type bottlebrush films showed significantly better nonbiofouling characteristics than those of the SDPB-type bottlebrush films.

Ultra-low fouling photocrosslinked coatings for the selective capture of cells expressing CD44.

The effective control of biointerfacial interactions is of outstanding interest in a broad range of biomedical applications, ranging from cell culture tools to biosensors and implantable medical devices. For many of these applications, highly specific interactions between cells and material surfaces are desired. Sophisticated control over these interactions requires reducing or preventing non-specific interactions on the one hand and displaying highly specific signals that can be recognized by extracellular receptors on the other. We have recently developed ultra-low fouling coatings that can be applied in a single step using photoreactive copolymers of 2-hydroxypropyl acrylamide and N-benzophenone acrylamide. Here, we have expanded this approach by incorporating polymerizable peptide monomers into these copolymers. The monomers QQGWFGAGK(acrylamide) and acrylamide-GAGQQGWF were synthesized after identifying the QQGWF sequence as a binding motif for CD44 by phage display for the first time. Our results demonstrate that UV-crosslinked coatings fabricated using the QQGWFGAGK(acrylamide) monomer are effective at selectively binding hMSC in the presence of HepG2 and HEK293 cells due to the difference in CD44 expression. Our results also demonstrate that the peptide modified coatings retain their low biofouling character using a BCA protein binding assay as well as an E. coli bacterial attachment assay over a 24 h period. Our approach provides an alternative to traditional integrin-mediated selective cell binding on surfaces and opens the door to new diagnostic applications, exploiting the fact that the transmembrane protein CD44 is highly expressed in multiple diseases.

Novel anti-biofouling and drug releasing materials for contact lenses.

Contact lens users very often become patients of allergic conjunctivitis, which is caused by protein and bacteria adsorption to the eye, because contact lenses easily adsorb proteins and bacteria. However, even if contact lens users develop eye diseases such as allergic conjunctivitis, most of them continue to use contact lenses to avoid interference to daily life or a decrease in their quality of life. If novel contact lenses able to prevent and additionally cure eye diseases can be manufactured, they could improve the quality of life of contact lens users worldwide. Thus, we aim to develop a novel material for contact lenses to prevent diseases by incorporating a zwitterionic polymer with the ability to suppress protein and bacteria adsorption. In addition, we also aim to effectively introduce and release a drug against allergic conjunctivitis from the contact lens material. Because the poorly water-soluble drug for allergic conjunctivitis (pranoprofen) forms a rigid crystal structure, we developed the novel "hot-melt press method" to construct a contact lens able to effectively release it. In the present study, polymer sheets containing carboxymethyl betaine (a kind of zwitterionic monomer), 2-hydroxyethyl methacrylate, and 1-vinyl-2-pyrrolidone were prepared using three different procedures. The sheets were hydrophilic and showed a strong resistance against protein and bacteria adsorption. The sheets prepared by the hot-melt press method were transparent and seemed to have potential as a material for contact lenses. In addition, the drug introduced into the sheets during preparation was observed to release at a practically appropriate dose. Therefore, it is expected that the sheets could possibly be used as a material for contact lenses which not only protect against the development of eye trouble due to protein and bacterial adsorption, but also heal allergic conjunctivitis.

Well-defined monolith morphology regulates cell adhesion and its functions.

Hydrophilic epoxy resin-based monoliths were employed as cell culture substrates. The monoliths were made of a porous material with a bicontinuous structure that consisted of a porous channel and a resin skeleton. Monolith disks were prepared with a skinless surface through polymerization-induced spinodal decomposition-type phase separation. The pore sizes, which were well controlled by the polymerization temperature, ranged from 70 to 380 nm. The quantity of protein adsorbed per unit area and the early-stage adhesion of HepG2 cells on the monolith substrates were independent of pore size, meaning they were not affected by surface topology. Long-term cell adhesion, as indicated by adherent cell number and shape, as well as liver-specific gene expression were significantly affected by pore size. In terms of cell shape, number, and gene expression, pores of approximately 200 nm were most suitable for HepG2 cell growth. These results highlight the importance of monolith morphology for use as a cell culture substrate. The well-controlled morphology demonstrated in this work indicates monoliths are capable of supporting growth for various types of cells in a range of applications.

Spatially Controlled Surface Modification of Porous Silicon for Sustained Drug Delivery Applications.

A new and facile approach to selectively functionalize the internal and external surfaces of porous silicon (pSi) for drug delivery applications is reported. To provide a surface that is suitable for sustained drug release of the hydrophobic cancer chemotherapy drug camptothecin (CPT), the internal surfaces of pSi films were first modified with 1-dodecene. To further modify the external surface of the pSi samples, an interlayer was applied by silanization with (3-aminopropyl)triethoxysilane (APTES) following air plasma treatment. In addition, copolymers of N-(2-hydroxypropyl) acrylamide (HPAm) and N-benzophenone acrylamide (BPAm) were grafted onto the external pSi surfaces by spin-coating and UV crosslinking. Each modification step was verified using attenuated total reflection-Fourier transform infrared (ATR-FTIR) spectroscopy, water contact angle (WCA) measurements, X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). In order to confirm that the air plasma treatment and silanization step only occurred on the top surface of pSi samples, confocal microscopy was employed after fluorescein isothiocyanate (FITC) conjugation. Drug release studies carried out over 17 h in PBS demonstrated that the modified pSi reservoirs released CPT continuously, while showing excellent stability. Furthermore, protein adsorption and cell attachment studies demonstrated the ability of the graft polymer layer to reduce both significantly. In combination with the biocompatible pSi substrate material, the facile modification strategy described in this study provides access to new multifunctional drug delivery systems (DDS) for applications in cancer therapy.

Functional surfaces for efficient differentiation of neural stem/progenitor cells into dopaminergic neurons.

Various techniques and systems have been reported for the efficient differentiation of neural stem/progenitor cells into dopaminergic neurons. Although a comparatively high percentage of dopaminergic neurons can be obtained using these techniques, the differentiated cells display varied cellular phenotypes such as astrocytes and oligodendrocytes. Generation of highly pure dopaminergic neurons is important for cell-based therapy and in vitro evaluation of dopaminergic neuron function. In this study, we developed a culture surface anchored with several neurotrophic factors and a neuronal cell-adhesive protein for efficient differentiation of neural stem/progenitor cells into dopaminergic neurons. Oligohistidine-fused brain-derived neurotrophic factor and glial cell line-derived neurotrophic factor, synthesized using genetic engineering, were co-immobilized on the surface via metal chelation. To facilitate cell adhesion, a cell-adhesive chimeric protein derived from laminin (LN-G) was also immobilized on the surface. Approximately 40% of the cells cultured for 14 days with these protein-immobilized substrates expressed tyrosine hydroxylase, a marker of dopaminergic neurons, with a three-fold increase in differentiation efficiency than that reported previously. In addition, the number of tyrosine hydroxylase-positive cells increased to approximately 80% of the culture after 30 days. These cells secreted dopamine and expressed dopaminergic neuron-specific genes. Interestingly, cell types (glial cells and oligodendrocytes) other than neuronal cells (immature and mature dopaminergic neurons) were not detected on the protein-anchored surface. Our results demonstrate that highly pure dopaminergic neurons can be exclusively obtained using the novel substrate without extra purification steps such as cell sorting. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 107A: 860-871, 2019.

Synthesis of a hemin-containing copolymer as a novel immunostimulator that induces IFN-gamma production.

BACKGROUND: Hemozoin, a chemical analog of a malarial pigment, is a crystal composed of heme dimers that can act as a potent Th1-type adjuvant, which strongly induces antibody production. However, the clinical applications of malarial hemozoin have limitations due to biosafety concerns and difficulties in the manufacturing process. Based on the premise that an analog of the heme polymer might display immunostimulatory effects, a hemin-containing polymer was developed as a novel immunostimulator. MATERIALS AND METHODS: To synthesize the copolymer containing hemin and N-isopropylacrylamide (NIPAM), this study employed a conventional radical polymerization method using 2,2'-azodiisobutyronitrile as the radical initiator; the synthesized copolymer was designated as NIPAM-hemin. RESULTS: NIPAM-hemin was soluble and showed no cytotoxicity in vitro. The NIPAM-hemin copolymer induced the production of interferon (IFN)-γ and interleukin (IL)-6 from peripheral blood mononuclear cells, although hemin and the NIPAM monomer individually did not induce the production of any cytokines. The production of IFN-γ induced by NIPAM-hemin was independent of toll-like receptor 9 and the NLRP3 inflammasome pathway. CONCLUSION: Given that NIPAM-hemin induced IL-6 and IFN-γ production in immune cells without any cytotoxic effects, NIPAM-hemin has potential therapeutic applications as a Th1-type adjuvant.

Characterization of Initial Cell Adhesion on Charged Polymer Substrates in Serum-Containing and Serum-Free Media.

Charged substrates are expected to promote cell adhesion via electrostatic interaction, but it remains unclear how cells adhere to these substrates. Here, initial cell adhesion (<30 min) was re-examined on charged substrates in serum-containing and serum-free media to distinguish among various cell adhesion mechanisms (i.e., electrostatic interaction, hydrophobic interaction, and biological interaction). Cationic and anionic methacrylate copolymers were coated on nonionic nontissue culture-treated polystyrene to create charged substrates. Cells adhered similarly on cationic, anionic, and nonionic substrates in serum-free medium via integrin-independent mechanisms, but their adhesion forces differed (anionic > cationic > nonionic substrates), indicating that cell adhesion is not mediated solely by the cells' negative charge. In serum-containing medium, the cells adhered minimally on anionic and nonionic substrates, but they adhered abundantly on cationic substrates via both integrin-dependent and -independent mechanisms. These results suggest that neither electrostatic force nor protein adsorption is accountable for cell adhesion. Conclusively, the observed phenomena revealed a gap in the generally accepted understanding of cell adhesion mechanisms on charged polymeric substrates. A reanalysis of their mechanisms is necessary.