TelePi: an affordable telepathology microscope camera system anyone can build and use.

Telepathology facilitates histological diagnoses through sharing expertise between pathologists. However, the associated costs are high and frequently prohibitive, especially in low-resource settings, where telepathology would paradoxically be of paramount importance due to a paucity of pathologists.We have constructed a telepathology system (TelePi) with a budget of < €120 using the small, single-board computer Raspberry Pi Zero and its High-Quality Camera Module in conjunction with a standard microscope and open-source software. The system requires no maintenance costs or service contracts, has a small footprint, can be moved and shared across several microscopes, and is independent from other computer operating systems. TelePi uses a responsive and high-resolution web-based live stream which allows remote consultation between two or more locations. TelePi can serve as a telepathology system for remote diagnostics of frozen sections. Additionally, it can be used as a standard microscope camera for teaching of medical students and for basic research. The quality of the TelePi system compared favorable to a commercially available telepathology system that exceed its cost by more than 125-fold. Additionally, still images are of publication quality equal to that of a whole slide scanner that costs 800 times more.In summary, TelePi is an affordable, versatile, and inexpensive camera system that potentially enables telepathology in low-resource settings without sacrificing image quality.

The Impact of Tissue Preparation on Salivary Gland Tumors Investigated by Fourier-Transform Infrared Microspectroscopy.

Due to the wide variety of benign and malignant salivary gland tumors, classification and malignant behavior determination based on histomorphological criteria can be difficult and sometimes impossible. Spectroscopical procedures can acquire molecular biological information without destroying the tissue within the measurement processes. Since several tissue preparation procedures exist, our study investigated the impact of these preparations on the chemical composition of healthy and tumorous salivary gland tissue by Fourier-transform infrared (FTIR) microspectroscopy. Sequential tissue cross-sections were prepared from native, formalin-fixed and formalin-fixed paraffin-embedded (FFPE) tissue and analyzed. The FFPE cross-sections were dewaxed and remeasured. By using principal component analysis (PCA) combined with a discriminant analysis (DA), robust models for the distinction of sample preparations were built individually for each parotid tissue type. As a result, the PCA-DA model evaluation showed a high similarity between native and formalin-fixed tissues based on their chemical composition. Thus, formalin-fixed tissues are highly representative of the native samples and facilitate a transfer from scientific laboratory analysis into the clinical routine due to their robust nature. Furthermore, the dewaxing of the cross-sections entails the loss of molecular information. Our study successfully demonstrated how FTIR microspectroscopy can be used as a powerful tool within existing clinical workflows.

Differentiation of Salivary Gland and Salivary Gland Tumor Tissue via Raman Imaging Combined with Multivariate Data Analysis.

Salivary gland tumors (SGTs) are a relevant, highly diverse subgroup of head and neck tumors whose entity determination can be difficult. Confocal Raman imaging in combination with multivariate data analysis may possibly support their correct classification. For the analysis of the translational potential of Raman imaging in SGT determination, a multi-stage evaluation process is necessary. By measuring a sample set of Warthin tumor, pleomorphic adenoma and non-tumor salivary gland tissue, Raman data were obtained and a thorough Raman band analysis was performed. This evaluation revealed highly overlapping Raman patterns with only minor spectral differences. Consequently, a principal component analysis (PCA) was calculated and further combined with a discriminant analysis (DA) to enable the best possible distinction. The PCA-DA model was characterized by accuracy, sensitivity, selectivity and precision values above 90% and validated by predicting model-unknown Raman spectra, of which 93% were classified correctly. Thus, we state our PCA-DA to be suitable for parotid tumor and non-salivary salivary gland tissue discrimination and prediction. For evaluation of the translational potential, further validation steps are necessary.

An Innovative Arteriovenous (AV) Loop Breast Cancer Model Tailored for Cancer Research.

Animal models are important tools to investigate the pathogenesis and develop treatment strategies for breast cancer in humans. In this study, we developed a new three-dimensional in vivo arteriovenous loop model of human breast cancer with the aid of biodegradable materials, including fibrin, alginate, and polycaprolactone. We examined the in vivo effects of various matrices on the growth of breast cancer cells by imaging and immunohistochemistry evaluation. Our findings clearly demonstrate that vascularized breast cancer microtissues could be engineered and recapitulate the in vivo situation and tumor-stromal interaction within an isolated environment in an in vivo organism. Alginate-fibrin hybrid matrices were considered as a highly powerful material for breast tumor engineering based on its stability and biocompatibility. We propose that the novel tumor model may not only serve as an invaluable platform for analyzing and understanding the molecular mechanisms and pattern of oncologic diseases, but also be tailored for individual therapy via transplantation of breast cancer patient-derived tumors.

The Impact of Melt Electrowritten Scaffold Design on Porosity Determined by X-Ray Microtomography.

IMPACT STATEMENT: Melt electrowriting is an AM technology that bridges the gap between solution electrospinning and melt microextrusion technologies. It can be applied to biomaterials and tissue engineering by making a spectrum of scaffolds with various laydown patterns at dimensions not previously studied. Using submicrometer X-ray tomography, a "fingerprint" of porosity for such scaffolds can be obtained and used as an important measure for quality control, to ensure that the scaffold fabricated is the one designed and allows the selection of specific scaffolds based on desired porosities.

A new multilayered membrane for tissue engineering of oral hard- and soft tissue by means of melt electrospinning writing and film casting - An in vitro study.

Membranes that form a mechanical barrier not only for cells but also for the bacterial flora of the oral cavity may be helpful in infection-free wound healing for guided tissue regeneration (GTR) applications in the field of oral- and maxillofacial surgery. Controlled wound healing without interference from bacterial contamination appears to be achievable in combination with surface scaffolds for bone- and soft tissue regeneration. As this has not yet been realized, we developed multilayered membranes in this study consisting of specific surface scaffolds for bone- and mucosal regeneration as well as bacteria-tight core membranes. These membranes were evaluated in terms of cell growth of osteoblast- (MG63), keratinocyte- (HaCaT), and fibroblast (L929) cell lines. Scaffolds were fabricated via melt electrospinning writing (MEW), while the core membrane was produced via film casting. All constructs were made of medical-grade poly(ε-caprolactone) (PCL). The bacteria-tightness was tested via a bacterial transmigration-assay. PCL scaffolds and core membranes alone demonstrated good cytocompatibility for all cell lines, which was even enhanced by fusing both components together. The core membrane displayed complete bacteria-tightness over two weeks. These bacteria-tight, individually-designed membranes from medical-grade PCL represent a high-potential, clinically oriented method of GTR in the field of oral- and maxillofacial surgery.

Dimension-Based Design of Melt Electrowritten Scaffolds.

The electrohydrodynamic stabilization of direct-written fluid jets is explored to design and manufacture tissue engineering scaffolds based on their desired fiber dimensions. It is demonstrated that melt electrowriting can fabricate a full spectrum of various fibers with discrete diameters (2-50 µm) using a single nozzle. This change in fiber diameter is digitally controlled by combining the mass flow rate to the nozzle with collector speed variations without changing the applied voltage. The greatest spectrum of fiber diameters was achieved by the simultaneous alteration of those parameters during printing. The highest placement accuracy could be achieved when maintaining the collector speed slightly above the critical translation speed. This permits the fabrication of medical-grade poly(ε-caprolactone) into complex multimodal and multiphasic scaffolds, using a single nozzle in a single print. This ability to control fiber diameter during printing opens new design opportunities for accurate scaffold fabrication for biomedical applications.

Additive manufacturing of polymer melts for implantable medical devices and scaffolds.

Melt processing is routinely used to fabricate medical polymeric devices/implants for clinical reconstruction and can be incorporated into quality systems procedures for medical device manufacture. As additive manufacturing (AM) becomes increasingly used for biomaterials and biofabrication, the translation of new, customizable, medical devices to the clinic becomes paramount. Melt processing is therefore a distinguishable group within AM that provides an avenue to manufacture scaffolds/implants with a clinical end-point. Three key melt processing AM technologies are highlighted in this review: melt micro-extrusion, selective laser sintering and melt electrospinning writing. The in vivo (including clinical) outcomes of medical devices and scaffolds made with these processes are reviewed. Together, they encompass the melt AM of scaffold architectures with feature sizes and resolutions ranging from 800 nm up to 700 µm.

Dissection of mechanoresponse elements in promoter sites of the mechanoresponsive CYR61 gene.

Mechanotransduction is important for mesenchymal regeneration and differentiation. Exaggerated high or very low impact yields pathological outcome resulting in fracture or tissue atrophy. Pathological strain in animal models was described but tools to dissect the respective stimuli and downstream pathways are limited. We expand the analytical tools to describe DNA strain response elements in a reporter gene approach. Deletion constructs of the human cysteine-rich protein 61 (CYR61) promoter were cloned into luciferase vectors and stably transfected into human telomerase-immortalised mesenchymal stem cells (hMSC-TERT). Cells were mechanically stimulated with variable frequencies, amplitudes and durations. Promoter activity was determined as well as CYR61 mRNA and protein expression. In silico promoter analysis identified putative transcription factor binding sites, one of which was a cAMP response element, verified by electrophoretic mobility shift assay. We demonstrate for the first time that the activity of promoter regions is inhibited in low, but stimulated in high frequency stimulations. We conclude that by varying conditions of mechanical strain it is possible to characterize stimulatory versus inhibitory strain on cellular levels. Our work may be helpful in future studies to dissect the molecular pathways of physiological versus pathological strain and may have implications for clinical exercise based treatment strategies.

Assessing the level of breast cancer awareness among recently diagnosed patients in Ain Shams University Hospital.

UNLABELLED: Breast cancer is the leading female malignancy among Egyptian women. The majority of Egyptian breast cancer patients present at late stages of the disease with a large tumor size compared to Western countries. Low breast cancer awareness, social and cultural factors were suggested to play crucial role in late presentation of breast cancer among Egyptians. The aim of our present study is to establish a questionnaire-based survey that can assess levels of breast cancer awareness among Egyptians. Patients enrolled were interviewed and answered 60 questions related to knowledge, symptoms, risk factors, prevention and management options of breast cancer. We evaluated our interactions with breast cancer patients and defined the level of awareness gained from education and culture of Egyptian women. Our results described that Egyptian breast cancer patients lack knowledge about their illness and condition. The lowest levels of awareness were related to age, education and culture. We concluded that breast cancer public awareness and women education programs covering factors identified in our study is warranted among Egyptian population. Overview OBJECTIVE: To assess breast cancer awareness among recently diagnosed breast cancer Egyptian patients. SUBJECTS AND METHODS: Among 289 interviewed breast cancer patients we enrolled 45 patients who fulfilled the study inclusion criteria. Participants were asked to answer a validated 60-item questionnaire that inquires about socio-demographic characteristics, knowledge of breast cancer symptoms, risk factors, symptoms, prevention, general management and willingness to participate in awareness campaigns. The average of interview time was about 45 min, depending on patient's age and education level. RESULTS: The mean age of included patients was 48.2 ± 10.19 years. Geographical distribution revealed that 66.7% patients were from Cairo and the rest were from other governorates, including Aswan, Sharqia, Mansora, Qena, Kalyobia, Elminya and Sohag. Among interviewed patients 85% were non-working housewives, 42.2% of them were illiterate. Questions about knowledge of breast cancer revealed that 53.33% of patients knew an acquaintance with breast cancer; however, they spent a median time of 3 months to seek medical advice after recognizing the first symptom with a delay range between a month and 72 months. We found that 73% of the participants presented to a physician with the same first recognized symptom and 75.6% didn't think of cancer then as a possible diagnosis. Total breast cancer knowledge scores had an average of 13.3 (out of 35 knowledge points), with 93% of the patients recognizing "painless breast mass" as a breast cancer symptom and 44% only recognized the concept of breast self examination. Interestingly, 61.4% identified breastfeeding as a risk factor for breast cancer, 60% did not recognize mammography as an early detection method, and 57.7% agreed that clinical breast examination (CBE) is important for early detection. Regarding management, 75% said breast cancer was potentially curable and 60% said medical care could be helpful regardless the age of presentation. CONCLUSION: Egyptian breast cancer patients knew little about their condition. Less awareness was related to age and education level. Low knowledge of risk factors, early detection and management of breast cancer should be addressed by designing patient education programs, where less educated patients are supported by health care professionals to participate in the management of breast cancer. Moreover, we found that 67% and 97% of enrolled breast cancer patients were willing as well to participate in spreading awareness among their community and among their own families, respectively.